Aleksandr Zhukov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Aleksandr Zhukov has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Dmitrii Valerievich Ardashev
South Ural State University, Chelyabinsk, Russia
3 shared publications Dmitrii Ardashev
2 shared publications- Egor Schuleshko1 shared publication
- Julia N. Ivanova
Institute of Geology of Ore Deposits, Petrography, Mineralogy and Geochemistry, Russian Academy of Sciences, Moscow, Russia
1 shared publication - Kirill Svyatoslavovich Ivanov
Institute of Geology and Geochemistry, Ural Branch, Russian Academy of Sciences, Yekaterinburg, Russia
1 shared publication Marina K. Bondareva
Titov Main Test and Space Systems Control Centre
1 shared publication
Latest Publications
- 15 September 2025
- Published by Novosibirsk State Technical University in Metal Working and Material Science
- Vol. 27 (3)
Modal analysis of various grinding wheel types for the evaluation of their integral elastic parameters
Introduction. In developing a mathematical model for the sound pressure generated by the grinding process, it became necessary to determine the actual values of the integral elastic parameters of grinding wheels to use as inputs in the model. This will expand the applicability of the model and maximize its practical utility. This paper describes an approach to determining Poisson's ratios and Young's moduli for grinding wheels with different characteristics. The elastic properties of the tool are the subject of this study. The purpose is to establish the relationship between actual values of integral elastic parameters and grinding wheel characteristics via modal analysis. The research method combines experimental investigation of natural frequency spectra and modal analysis, implemented via the finite element method in specialized software. Additionally, regression analysis is employed to derive empirical dependencies of the integral elastic parameters of grinding wheels on abrasive grain size and hardness. Results and discussion. The main result of this work is the determination of the actual values of Poisson's ratios and Young's moduli for grinding wheels with the studied characteristics. The selection of grinding wheel characteristics allowed for the investigation of the influence of abrasive grain size and hardness on its integral elastic properties. The development of a mathematical model for sound pressure generated by the grinding process, along with a methodology for predicting the service life of grinding wheels based on this model, will improve grinding operation efficiency by reducing the machine-setting time, increasing processing time, reducing consumption of manufacturing resources, and optimizing tool lifespan utilization.
- 15 September 2025
- Published by Novosibirsk State Technical University in Metal Working and Material Science
- Vol. 27 (3)
Modal analysis of various grinding wheel types for the evaluation of their integral elastic parameters
Introduction. In developing a mathematical model for the sound pressure generated by the grinding process, it became necessary to determine the actual values of the integral elastic parameters of grinding wheels to use as inputs in the model. This will expand the applicability of the model and maximize its practical utility. This paper describes an approach to determining Poisson's ratios and Young's moduli for grinding wheels with different characteristics. The elastic properties of the tool are the subject of this study. The purpose is to establish the relationship between actual values of integral elastic parameters and grinding wheel characteristics via modal analysis. The research method combines experimental investigation of natural frequency spectra and modal analysis, implemented via the finite element method in specialized software. Additionally, regression analysis is employed to derive empirical dependencies of the integral elastic parameters of grinding wheels on abrasive grain size and hardness. Results and discussion. The main result of this work is the determination of the actual values of Poisson's ratios and Young's moduli for grinding wheels with the studied characteristics. The selection of grinding wheel characteristics allowed for the investigation of the influence of abrasive grain size and hardness on its integral elastic properties. The development of a mathematical model for sound pressure generated by the grinding process, along with a methodology for predicting the service life of grinding wheels based on this model, will improve grinding operation efficiency by reducing the machine-setting time, increasing processing time, reducing consumption of manufacturing resources, and optimizing tool lifespan utilization.
- 1 January 2023
- Published by The Russian Academy of Sciences in Voprosy Istorii Estestvoznaniia i Tekhniki
- Vol. 44 (2) , 254-268
The History of the Use of Acoustics in Mechanical Engineering
The article reviews the history of acoustics and the history of the use of its methods and achievements in mechanical engineering. Acoustic monitoring methods justly hold a significant place among the methods for studying physical objects and industrial processes. These methods are mainly intended for detecting various defects (ultrasound control), monitoring parameters of industrial processes, and determining physical and mechanical properties of products as well as their geometric characteristics. The distinctive feature of the acoustic methods, which helped their spread, is the possibility for non-destructive testing, i. e. causing no damage to the object under study. Another, no less important merit of these methods is a possibility for testing without disrupting industrial processes.
- 1 January 2023
- Published by The Russian Academy of Sciences in Voprosy Istorii Estestvoznaniia i Tekhniki
- Vol. 44 (2) , 254-268
The History of the Use of Acoustics in Mechanical Engineering
The article reviews the history of acoustics and the history of the use of its methods and achievements in mechanical engineering. Acoustic monitoring methods justly hold a significant place among the methods for studying physical objects and industrial processes. These methods are mainly intended for detecting various defects (ultrasound control), monitoring parameters of industrial processes, and determining physical and mechanical properties of products as well as their geometric characteristics. The distinctive feature of the acoustic methods, which helped their spread, is the possibility for non-destructive testing, i. e. causing no damage to the object under study. Another, no less important merit of these methods is a possibility for testing without disrupting industrial processes.
- 1 January 2023
- Published by The Russian Academy of Sciences in Voprosy Istorii Estestvoznaniia i Tekhniki
- Vol. 44 (2) , 254-268
History of acoustics in engineering and industry
The article reviews the history of acoustics and the history of the use of its methods and achievements in mechanical engineering. Acoustic monitoring methods justly hold a significant place among
- 1 January 2023
- Published by The Russian Academy of Sciences in Voprosy Istorii Estestvoznaniia i Tekhniki
- Vol. 44 (2) , 254-268
History of acoustics in engineering and industry
The article reviews the history of acoustics and the history of the use of its methods and achievements in mechanical engineering. Acoustic monitoring methods justly hold a significant place among
- 15 December 2022
- Published by Novosibirsk State Technical University in Metal Working and Material Science
- Vol. 24 (4) , 64-83
Investigation of the relationship between the cutting ability of the tool and the acoustic signal parameters during profile grinding
Introduction. Modern mechanical engineering is closely connected with digital production management technologies, for which an important aspect is the collection of reliable information about the current state of the systems. Acoustic methods of current control of the tool cutting ability possess significant potential due to the possibility of continuously obtaining up-to-date data on the parameters of machining process. Profile grinding is one of the widespread methods of machining surfaces of complex configuration. The high importance of this method lies in the high degree of responsibility of shaped parts obtained with it. The wear parameter of profiled grinding wheels needs current control to the same extent as other types of cutting tools. At the same time, acoustic methods of research have not found wide application in relation to profile grinding. In view of this, the present work is aimed at studying the influence of the tool wear rate on the acoustic characteristics of grinding when using grinding wheels of different profiles. Purpose of work is to determine the acoustic parameters of profile grinding with application of planar grinding scheme as it wears out in comparison with analogical process with application of straight profile grinding wheel. As the basic methods of research an experiment is used to study the acoustic phenomena accompanying grinding with application of wheels of different profile. An analysis of the acoustic signal of grinding is carried out, as well as an analysis of the spectrum of its frequency composition. The frequencies of natural vibrations of grinding wheels of different profiles are investigated, its sound index is determined as a criterion for evaluating its characteristics. Acoustic characteristics of the grinding process with the use of grinding wheels of different profiles are compared. Regression analysis of acoustic data obtained as a result of the experiment is also used. Results and discussion. Spectrograms of frequencies of natural vibrations of the wheels under research, as well as a number of spectrograms of the acoustic signal accompanying the processing process for various technological conditions are received. As a result of comparing the obtained spectrograms, the informative frequencies of the grinding processes are determined. Mathematical models of sound level dependence on the value of periodic vertical feed St at depth t and processing time T are developed. It is established that the value of periodic vertical feed St at depth t has a greater influence on the acoustic index in comparison with the machining duration T. Practical significance and prospects of the results of the work lies in the possibility of increasing the efficiency of profile grinding processes due to the rational use of the tool availability.
- 15 December 2022
- Published by Novosibirsk State Technical University in Metal Working and Material Science
- Vol. 24 (4) , 64-83
Investigation of the relationship between the cutting ability of the tool and the acoustic signal parameters during profile grinding
Introduction. Modern mechanical engineering is closely connected with digital production management technologies, for which an important aspect is the collection of reliable information about the current state of the systems. Acoustic methods of current control of the tool cutting ability possess significant potential due to the possibility of continuously obtaining up-to-date data on the parameters of machining process. Profile grinding is one of the widespread methods of machining surfaces of complex configuration. The high importance of this method lies in the high degree of responsibility of shaped parts obtained with it. The wear parameter of profiled grinding wheels needs current control to the same extent as other types of cutting tools. At the same time, acoustic methods of research have not found wide application in relation to profile grinding. In view of this, the present work is aimed at studying the influence of the tool wear rate on the acoustic characteristics of grinding when using grinding wheels of different profiles. Purpose of work is to determine the acoustic parameters of profile grinding with application of planar grinding scheme as it wears out in comparison with analogical process with application of straight profile grinding wheel. As the basic methods of research an experiment is used to study the acoustic phenomena accompanying grinding with application of wheels of different profile. An analysis of the acoustic signal of grinding is carried out, as well as an analysis of the spectrum of its frequency composition. The frequencies of natural vibrations of grinding wheels of different profiles are investigated, its sound index is determined as a criterion for evaluating its characteristics. Acoustic characteristics of the grinding process with the use of grinding wheels of different profiles are compared. Regression analysis of acoustic data obtained as a result of the experiment is also used. Results and discussion. Spectrograms of frequencies of natural vibrations of the wheels under research, as well as a number of spectrograms of the acoustic signal accompanying the processing process for various technological conditions are received. As a result of comparing the obtained spectrograms, the informative frequencies of the grinding processes are determined. Mathematical models of sound level dependence on the value of periodic vertical feed St at depth t and processing time T are developed. It is established that the value of periodic vertical feed St at depth t has a greater influence on the acoustic index in comparison with the machining duration T. Practical significance and prospects of the results of the work lies in the possibility of increasing the efficiency of profile grinding processes due to the rational use of the tool availability.
- Open Access
- 15 December 2019
- Published by Peoples' Friendship University of Russia in RUDN Journal of Engineering Researches
- Vol. 20 (2) , 123-133
Experience and opportunities of space systems applications of Earth remote sensing to prediction gold mineralization on difficult to approach areas on the example of the Polar Urals
The questions of the using of domestic and foreign spacecraft (SC), as well as Earth remote sensing (ERS) equipment for search and predication of gold mineralization on the example of the promising and difficult to approach areas of the Polar and the Northern Urals are discussed in the article. The solution of this problem is showed on the example of the prospective areas of the Arctic and the Northern Urals based on analysis of Landsat 7 multispectral images. Hidden structures (arc, annular, and radial) were detected with help of analyses of Landsat 7 imagery. Hidden structures determine the position of gold mineralization of the Toupugol-Hanmeyshorskogo (the Novogodnenskoe ore field, the Polar Urals) and the Turinsko-Auerbahovskogo (the Auerbachovskoe ore field, the Northern Urals) ore regions. The decision of this problem is given on the example of the promising territory of the Polar Urals with the use foreign SC the Landsat 7. Comparative analysis of the existing SC of ERS has been carried out, this target information has in the public domain. The onboard equipment installed on domestic spacecraft and the information obtained with use onboard equipment meets the existing requirements. These requirements are placed to onboard equipment to solve the problem of search and predication mineralization. At the same time, the capabilities of the deployed domestic orbital grouping of SC of ERS transcend the capabilities of SC of ERS the Landsat 7. Opportunity of obtaining geospatial information with the use of pseudospacecrafts is being considered. These have several advantages over SC and unmanned aerial vehicles.
- 15 December 2019
- Published by Peoples' Friendship University of Russia in RUDN Journal of Engineering Researches
- Vol. 20 (2) , 123-133
Open AccessExperience and opportunities of space systems applications of Earth remote sensing to prediction gold mineralization on difficult to approach areas on the example of the Polar Urals
The questions of the using of domestic and foreign spacecraft (SC), as well as Earth remote sensing (ERS) equipment for search and predication of gold mineralization on the example of the promising and difficult to approach areas of the Polar and the Northern Urals are discussed in the article. The solution of this problem is showed on the example of the prospective areas of the Arctic and the Northern Urals based on analysis of Landsat 7 multispectral images. Hidden structures (arc, annular, and radial) were detected with help of analyses of Landsat 7 imagery. Hidden structures determine the position of gold mineralization of the Toupugol-Hanmeyshorskogo (the Novogodnenskoe ore field, the Polar Urals) and the Turinsko-Auerbahovskogo (the Auerbachovskoe ore field, the Northern Urals) ore regions. The decision of this problem is given on the example of the promising territory of the Polar Urals with the use foreign SC the Landsat 7. Comparative analysis of the existing SC of ERS has been carried out, this target information has in the public domain. The onboard equipment installed on domestic spacecraft and the information obtained with use onboard equipment meets the existing requirements. These requirements are placed to onboard equipment to solve the problem of search and predication mineralization. At the same time, the capabilities of the deployed domestic orbital grouping of SC of ERS transcend the capabilities of SC of ERS the Landsat 7. Opportunity of obtaining geospatial information with the use of pseudospacecrafts is being considered. These have several advantages over SC and unmanned aerial vehicles.