Thomas Tröster
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Thomas Tröster has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Thorsten Marten
Institute for Lightweight Design with Hybrid Systems (ILH), Automotive Lightweight Design (LiA), Paderborn University, Warburger Str. 100, 33098 Paderborn, Germany
7 shared publications - Deviprasad Chalicheemalapalli Jayasankar
Institute for Lightweight Design with Hybrid Systems (ILH), Automotive Lightweight Design (LiA), Paderborn University, Warburger Str. 100, 33098 Paderborn, Germany
4 shared publications - Alexander Delp
Department of Materials Test Engineering (WPT), TU Dortmund University, 44227 Dortmund, Germany
3 shared publications - Deekshith Reddy Devulapally
Paderborn University, Chair of Automotive Lightweight Design, Warburger Str. 100, 33098 Paderborn, Germany
3 shared publications - Frank Walther
Chair of Materials Test Engineering (WPT) TU Dortmund University Dortmund Germany
3 shared publications - Jan Haubrich
Institute for Frontier Materials on Earth and in Space, German Aerospace Center (DLR e.V. Deutsches Zentrum für Luft-und Raumfahrt), Linder Höhe, D-51147 Cologne, Germany
3 shared publications
Latest Publications
- Open Access
- 8 October 2026
- Published by Springer Nature in Discover Mechanical Engineering
- Vol. 5 (1) , 187
Finite element investigation of orientation-dependent mechanical properties in Reuleaux triangle clinch joints
Clinch joining is widely used in sheet metal assemblies, and joint geometry strongly influences mechanical performance. While most studies focus on circular or rotationally symmetric joint geometries, the influence of non-rotationally symmetric joint orientation relative to the loading direction has received limited attention. The present study addresses this gap through a systematic finite element investigation in which three distinct orientations of a Reuleaux triangle clinch joint are analyzed under quasi-static lap-shear loading, with all other model parameters held constant. The study is purely numerical; no experimental validation or damage model is included. Force–displacement responses, initial stiffness, and load at 1 mm displacement are evaluated alongside local stress and strain distributions. The results show that joint orientation has a negligible effect on elastic stiffness but a significant influence on load-bearing capacity, with the arc-loaded configuration outperforming the vertex-loaded configuration by approximately 10%. The origin of this difference is traced to orientation-dependent stress concentration at the joint neck and the asymmetry in neck thickness between orientations.
- 8 October 2026
- Published by Springer Nature in Discover Mechanical Engineering
- Vol. 5 (1) , 187
Open AccessFinite element investigation of orientation-dependent mechanical properties in Reuleaux triangle clinch joints
Clinch joining is widely used in sheet metal assemblies, and joint geometry strongly influences mechanical performance. While most studies focus on circular or rotationally symmetric joint geometries, the influence of non-rotationally symmetric joint orientation relative to the loading direction has received limited attention. The present study addresses this gap through a systematic finite element investigation in which three distinct orientations of a Reuleaux triangle clinch joint are analyzed under quasi-static lap-shear loading, with all other model parameters held constant. The study is purely numerical; no experimental validation or damage model is included. Force–displacement responses, initial stiffness, and load at 1 mm displacement are evaluated alongside local stress and strain distributions. The results show that joint orientation has a negligible effect on elastic stiffness but a significant influence on load-bearing capacity, with the arc-loaded configuration outperforming the vertex-loaded configuration by approximately 10%. The origin of this difference is traced to orientation-dependent stress concentration at the joint neck and the asymmetry in neck thickness between orientations.
- Open Access
- 15 April 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1185, 161-169
A Numerical Study on the Mutual Influence of Joint Orientation and Component Geometry in Non-Rotationally Symmetric Clinched Joints
Clinched joints with non-rotationally symmetric geometries exhibit orientation-dependent mechanical behavior that is commonly neglected in structural-scale simulations. Reuleaux triangle shaped clinched joints, in particular, show pronounced in-plane anisotropy depending on their orientation. While such effects have been studied at joint and specimen scale, their relevance at the structural level remains largely unexplored. In this work, the influence of joint orientation on the bending response of a joined structure is investigated using numerical simulations. A simplified joint replacement model based on the *CONSTRAINED_SPR2 point-connector formulation in LS-DYNA is employed, with parameters calibrated from previously obtained experimental force displacement data. A hat shaped profile structure subjected to three-point bending is analyzed in a parametric study considering variations in joint orientation, joint spacing, and profile geometry. The results show that joint orientation has little influence during the initial deformation phase but becomes increasingly significant at larger displacements, where joint behavior governs load transfer. Orientation dependent effects are found to influence the global force displacement response and local load redistribution among joints, with magnitudes comparable to those induced by changes in joint spacing and structural geometry. The findings confirm that joint orientation effects remain relevant at the structural level and should be considered in the design of structures assembled using non-rotationally symmetric clinched joints.
- 15 April 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1185, 161-169
Open AccessA Numerical Study on the Mutual Influence of Joint Orientation and Component Geometry in Non-Rotationally Symmetric Clinched Joints
Clinched joints with non-rotationally symmetric geometries exhibit orientation-dependent mechanical behavior that is commonly neglected in structural-scale simulations. Reuleaux triangle shaped clinched joints, in particular, show pronounced in-plane anisotropy depending on their orientation. While such effects have been studied at joint and specimen scale, their relevance at the structural level remains largely unexplored. In this work, the influence of joint orientation on the bending response of a joined structure is investigated using numerical simulations. A simplified joint replacement model based on the *CONSTRAINED_SPR2 point-connector formulation in LS-DYNA is employed, with parameters calibrated from previously obtained experimental force displacement data. A hat shaped profile structure subjected to three-point bending is analyzed in a parametric study considering variations in joint orientation, joint spacing, and profile geometry. The results show that joint orientation has little influence during the initial deformation phase but becomes increasingly significant at larger displacements, where joint behavior governs load transfer. Orientation dependent effects are found to influence the global force displacement response and local load redistribution among joints, with magnitudes comparable to those induced by changes in joint spacing and structural geometry. The findings confirm that joint orientation effects remain relevant at the structural level and should be considered in the design of structures assembled using non-rotationally symmetric clinched joints.
- Open Access
- 13 April 2026
- Published by Springer Nature in Discover Mechanical Engineering
- Vol. 5 (1) , 58
Improving the load-bearing capacity of clinched joints through cavity filling with structural epoxy adhesive
This study investigates a new method for enhancing the mechanical performance of clinched joints by filling the residual cavity with structural epoxy adhesive. Two adhesives (3M 07333 and Betamate 2098) with different Young’s moduli and multiple fill volumes were examined to determine how adhesive properties and cavity filling influence joint behaviour. Single-lap shear tests showed that adhesive filling increases peak force compared to unfilled joints, with the higher-modulus adhesive providing the largest improvement. Reducing the fill volume led to proportional reductions in shear strength, demonstrating that the joint response can be tuned through controlled cavity filling. In head-tension loading, adhesive filling increased peak force relative to unfilled joints, although variations in fill volume produced no significant change. All shear specimens failed by neck fracture, while cross-tension specimens consistently failed by pull-out, indicating that the adhesive modifies load capacity but not failure mode. The results demonstrate that cavity filling is an effective post-process reinforcement strategy that allows targeted adaptation of clinched joint behaviour without modifying the clinching process or geometry.
- 13 April 2026
- Published by Springer Nature in Discover Mechanical Engineering
- Vol. 5 (1) , 58
Open AccessImproving the load-bearing capacity of clinched joints through cavity filling with structural epoxy adhesive
This study investigates a new method for enhancing the mechanical performance of clinched joints by filling the residual cavity with structural epoxy adhesive. Two adhesives (3M 07333 and Betamate 2098) with different Young’s moduli and multiple fill volumes were examined to determine how adhesive properties and cavity filling influence joint behaviour. Single-lap shear tests showed that adhesive filling increases peak force compared to unfilled joints, with the higher-modulus adhesive providing the largest improvement. Reducing the fill volume led to proportional reductions in shear strength, demonstrating that the joint response can be tuned through controlled cavity filling. In head-tension loading, adhesive filling increased peak force relative to unfilled joints, although variations in fill volume produced no significant change. All shear specimens failed by neck fracture, while cross-tension specimens consistently failed by pull-out, indicating that the adhesive modifies load capacity but not failure mode. The results demonstrate that cavity filling is an effective post-process reinforcement strategy that allows targeted adaptation of clinched joint behaviour without modifying the clinching process or geometry.
- Open Access
- 23 August 2025
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 945
Energy- and material-efficient Ti-6Al-4V sheet part fabrication by the novel TISTRAQ-process, including resistance heating and tool-based quenching: Insights into test stand design and material potential
- 23 August 2025
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 945
Open AccessEnergy- and material-efficient Ti-6Al-4V sheet part fabrication by the novel TISTRAQ-process, including resistance heating and tool-based quenching: Insights into test stand design and material potential
- Open Access
- 11 August 2025
- Published by MDPI AG in Technologies
- Vol. 13 (8) , 354
Localized Ultrasonic Cleaning for Injection Mold Cavities: A Scalable In Situ Process with Surface Quality Monitoring
As global industries seek to reduce energy consumption and lower CO2 emissions, the need for sustainable, efficient maintenance processes in manufacturing has become increasingly important. Traditional mold cleaning methods often require complete tool disassembly, extended downtime, and heavy use of solvents, resulting in high energy costs and environmental impact. This study presents a novel localized ultrasonic cleaning process for injection molding tools that enables targeted, in situ cleaning of mold cavities without removing the tool from the press. A precisely positioned ultrasonic transducer delivers cleaning energy directly to contaminated areas, eliminating the need for complete mold removal. Multiple cleaning agents, including alkaline and organic acid solutions, were evaluated for their effectiveness in combination with ultrasonic excitation. Surface roughness measurements were used to assess cleaning performance over repeated contamination and cleaning cycles. Although initial tests were performed manually in the lab, results indicate that the method can be scaled up and automated effectively. This process offers a promising path toward energy-efficient, low-emission tool maintenance across a wide range of injection molding applications.
- 11 August 2025
- Published by MDPI AG in Technologies
- Vol. 13 (8) , 354
Open AccessLocalized Ultrasonic Cleaning for Injection Mold Cavities: A Scalable In Situ Process with Surface Quality Monitoring
As global industries seek to reduce energy consumption and lower CO2 emissions, the need for sustainable, efficient maintenance processes in manufacturing has become increasingly important. Traditional mold cleaning methods often require complete tool disassembly, extended downtime, and heavy use of solvents, resulting in high energy costs and environmental impact. This study presents a novel localized ultrasonic cleaning process for injection molding tools that enables targeted, in situ cleaning of mold cavities without removing the tool from the press. A precisely positioned ultrasonic transducer delivers cleaning energy directly to contaminated areas, eliminating the need for complete mold removal. Multiple cleaning agents, including alkaline and organic acid solutions, were evaluated for their effectiveness in combination with ultrasonic excitation. Surface roughness measurements were used to assess cleaning performance over repeated contamination and cleaning cycles. Although initial tests were performed manually in the lab, results indicate that the method can be scaled up and automated effectively. This process offers a promising path toward energy-efficient, low-emission tool maintenance across a wide range of injection molding applications.
- Open Access
Process Development for Hybrid Brake Pedals Using Compression Molding with Integrated In-Mold Assembly
Currently, the need for resource efficiency and CO2 reduction is growing in industrial production, particularly in the automotive sector. To address this, the industry is focusing on lightweight components that reduce weight without compromising mechanical properties, which are essential for passenger safety. Hybrid designs offer an effective solution by combining weight reduction with improved mechanical performance and functional integration. This study focuses on a one-step manufacturing process that integrates forming and bonding of hybrid systems using compression molding. This approach reduces production time and costs compared to traditional methods. Conventional Post-Mold Assembly (PMA) processes require two separate steps to combine fiber-reinforced plastic (FRP) structures with metal components. In contrast, the novel In-Mold Assembly (IMA) process developed in this study combines forming and bonding in a single step. In the IMA process, glass-mat-reinforced thermoplastic (GMT) is simultaneously formed and bonded between two metal belts during compression molding. The GMT core provides stiffening and load transmission between the metal belts, which handle tensile and compressive stresses. This method allows to produce hybrid structures with optimized material distribution for load-bearing and functional performance. The process was validated by producing a lightweight hybrid brake pedal. Demonstrating its potential for efficient and sustainable automotive production, the developed hybrid brake pedal achieved a 35% weight reduction compared to the steel reference while maintaining mechanical performance under quasi-static loading
Open AccessProcess Development for Hybrid Brake Pedals Using Compression Molding with Integrated In-Mold Assembly
Currently, the need for resource efficiency and CO2 reduction is growing in industrial production, particularly in the automotive sector. To address this, the industry is focusing on lightweight components that reduce weight without compromising mechanical properties, which are essential for passenger safety. Hybrid designs offer an effective solution by combining weight reduction with improved mechanical performance and functional integration. This study focuses on a one-step manufacturing process that integrates forming and bonding of hybrid systems using compression molding. This approach reduces production time and costs compared to traditional methods. Conventional Post-Mold Assembly (PMA) processes require two separate steps to combine fiber-reinforced plastic (FRP) structures with metal components. In contrast, the novel In-Mold Assembly (IMA) process developed in this study combines forming and bonding in a single step. In the IMA process, glass-mat-reinforced thermoplastic (GMT) is simultaneously formed and bonded between two metal belts during compression molding. The GMT core provides stiffening and load transmission between the metal belts, which handle tensile and compressive stresses. This method allows to produce hybrid structures with optimized material distribution for load-bearing and functional performance. The process was validated by producing a lightweight hybrid brake pedal. Demonstrating its potential for efficient and sustainable automotive production, the developed hybrid brake pedal achieved a 35% weight reduction compared to the steel reference while maintaining mechanical performance under quasi-static loading
- 30 April 2025
- Published by Springer Nature
- p. 589-606
Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte im öffentlichen Nahverkehr
- 30 April 2025
- Published by Springer Nature
- p. 589-606
Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte im öffentlichen Nahverkehr
- Open Access
Optimizing Injection Molding Tool Design with Additive Manufacturing: A Focus on Thermal Performance and Process Efficiency
Injection molding plays a pivotal role in modern manufacturing, enabling the mass production of complex components with high precision. However, traditional tooling methods often face challenges related to thermal management, design constraints, and material efficiency. This study examines the use of additive manufacturing (AM) in the development and optimization of injection molding tools to overcome these limitations. A novel prototype was fabricated using AM techniques, incorporating integrated cooling channels and optimized lattice structures to enhance thermal performance and simplify the manufacturing process. Experimental validation demonstrated the prototype’s effective integration into a vacuum-assisted resin transfer molding (VA-LRTM) system without requiring modifications to existing tooling setups. The results showed significant improvements in temperature regulation, reduced cycle times, and consistent mechanical properties of the molded components compared to conventional approaches. By reducing the number of tool components and eliminating the need for support structures during manufacturing, AM also minimized material waste and post-processing requirements. This research highlights the transformative potential of additive manufacturing in injection molding tool design, offering increased flexibility, cost efficiency, and enhanced functionality to meet the evolving demands of modern industrial applications.
Open AccessOptimizing Injection Molding Tool Design with Additive Manufacturing: A Focus on Thermal Performance and Process Efficiency
Injection molding plays a pivotal role in modern manufacturing, enabling the mass production of complex components with high precision. However, traditional tooling methods often face challenges related to thermal management, design constraints, and material efficiency. This study examines the use of additive manufacturing (AM) in the development and optimization of injection molding tools to overcome these limitations. A novel prototype was fabricated using AM techniques, incorporating integrated cooling channels and optimized lattice structures to enhance thermal performance and simplify the manufacturing process. Experimental validation demonstrated the prototype’s effective integration into a vacuum-assisted resin transfer molding (VA-LRTM) system without requiring modifications to existing tooling setups. The results showed significant improvements in temperature regulation, reduced cycle times, and consistent mechanical properties of the molded components compared to conventional approaches. By reducing the number of tool components and eliminating the need for support structures during manufacturing, AM also minimized material waste and post-processing requirements. This research highlights the transformative potential of additive manufacturing in injection molding tool design, offering increased flexibility, cost efficiency, and enhanced functionality to meet the evolving demands of modern industrial applications.
- Open Access
- 10 August 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (8) , 316
Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure
The use of hybrid materials as a combination of fibre-reinforced plastic (FRP) and metal is of great interest in order to meet the increasing demands for sustainability, efficiency, and emission reduction based on the principle of lightweight design. These two components can therefore be joined using the intrinsic joining technique, which is formed by curing the matrix of the FRP component. In this study, for the hybrid joint, unidirectionally pre-impregnated semi-finished products (prepregs) with duromer matrix resin and micro-alloyed HC340LA steel were used. In order to conduct a detailed investigation, the damage mechanisms of intrinsically produced fibre metal laminates (FMLs), a new clamping device, and a novel pressing tool were designed and put into operation. The prepregs were prestressed by applying a preloading force using a specially designed prestressing frame. Hybrid specimens were then produced and subjected to nanoindentation and a shear tensile test. In particular, the effect of the residual stress state by varying the defined prestressing force on the damage mechanisms was studied. The results showed that no fracture patterns occurred in the interface of the specimens without preloading as a result of curing at 120 °C, whereas specimens with preloading failed at the boundary layer in the tensile range. Nevertheless, all specimens cured at 160 °C failed at the boundary layer in the tensile range. Furthermore, it was proven that the force and displacement of the preloaded specimens were promisingly higher than those of the unpreloaded specimens.
- 10 August 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (8) , 316
Open AccessDevelopment of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure
The use of hybrid materials as a combination of fibre-reinforced plastic (FRP) and metal is of great interest in order to meet the increasing demands for sustainability, efficiency, and emission reduction based on the principle of lightweight design. These two components can therefore be joined using the intrinsic joining technique, which is formed by curing the matrix of the FRP component. In this study, for the hybrid joint, unidirectionally pre-impregnated semi-finished products (prepregs) with duromer matrix resin and micro-alloyed HC340LA steel were used. In order to conduct a detailed investigation, the damage mechanisms of intrinsically produced fibre metal laminates (FMLs), a new clamping device, and a novel pressing tool were designed and put into operation. The prepregs were prestressed by applying a preloading force using a specially designed prestressing frame. Hybrid specimens were then produced and subjected to nanoindentation and a shear tensile test. In particular, the effect of the residual stress state by varying the defined prestressing force on the damage mechanisms was studied. The results showed that no fracture patterns occurred in the interface of the specimens without preloading as a result of curing at 120 °C, whereas specimens with preloading failed at the boundary layer in the tensile range. Nevertheless, all specimens cured at 160 °C failed at the boundary layer in the tensile range. Furthermore, it was proven that the force and displacement of the preloaded specimens were promisingly higher than those of the unpreloaded specimens.