Christian Gierden
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Christian Gierden has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Johanna Waimann
Institute of Mechanics of Materials Ruhr‐Universitat Bochum Bochum Germany
6 shared publications - Stefanie Reese
Institute of Applied Mechanics RWTH Aachen University Aachen Germany
5 shared publications Bob Svendsen
Material Mechanics RWTH Aachen University Aachen Germany
4 shared publicationsStefanie Reese
Institute of Applied Mechanics RWTH Aachen University Aachen Germany
4 shared publications- Annika Schmidt
Institute of Applied Mechanics RWTH Aachen University Aachen Germany
3 shared publications - Bob Svendsen
Microstructure Physics and Alloy Design, Max-Planck-Institut für Eisenforschung, Düsseldorf, Germany
2 shared publications
Latest Publications
- Open Access
- 16 December 2024
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 435
Efficient thermo-mechanically coupled and geometrically nonlinear two-scale FE-FFT-based modeling of elasto-viscoplastic polycrystalline materials
- 16 December 2024
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 435
Open AccessEfficient thermo-mechanically coupled and geometrically nonlinear two-scale FE-FFT-based modeling of elasto-viscoplastic polycrystalline materials
- Open Access
- 12 November 2024
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 433
Direct data-driven algorithms for multiscale mechanics
- 12 November 2024
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 433
Open AccessDirect data-driven algorithms for multiscale mechanics
- Open Access
- 10 September 2023
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 23 (2)
Modeling the material behavior of heterogeneous materials considering a two‐scale FE–FFT‐based simulation framework
In various engineering applications, components subjected to high mechanical or multi‐physical loads such as thermal, thermo‐mechanical, or electro‐thermal loads are predominantly made of metals or composites. These materials are characterized by polycrystalline or multi‐phase microstructures which determine the overall material response. However, since the microscopic material behavior is directly related to the distribution, size, and morphology of the individual grains or phase constituents, precise predictions of the macroscopic material response require simulations of the microstructural behavior. Hence, this work considers a two‐scale finite element (FE) and fast Fourier transform (FFT)‐based simulation framework, which is an efficient alternative to the classical method for the simulation of periodic unit cells. Assuming scale separation, the macroscopic and microscopic boundary value problems are first solved individually and subsequently linked by performing a scale transition in terms of averaging the macroscopic quantities over the corresponding local fields. While the macroscopic solution is computed by means of the finite element method, the microscopic boundary value problem, which is embedded as a periodic unit cell in each macroscopic integration point, is solved using an FFT‐based simulation method. In general, these microscopic simulations allow to model grain‐scale phenomena such as martensitic phase transformation or plastic deformation caused by dislocation glide which can be observed in polycrystalline materials. In this work, we present a two‐scale FE–FFT‐based model to capture the martensitic phase transformations in shape memory alloys. In order to demonstrate the applicability of the model, a numerical example is given.
- 10 September 2023
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 23 (2)
Open AccessModeling the material behavior of heterogeneous materials considering a two‐scale FE–FFT‐based simulation framework
In various engineering applications, components subjected to high mechanical or multi‐physical loads such as thermal, thermo‐mechanical, or electro‐thermal loads are predominantly made of metals or composites. These materials are characterized by polycrystalline or multi‐phase microstructures which determine the overall material response. However, since the microscopic material behavior is directly related to the distribution, size, and morphology of the individual grains or phase constituents, precise predictions of the macroscopic material response require simulations of the microstructural behavior. Hence, this work considers a two‐scale finite element (FE) and fast Fourier transform (FFT)‐based simulation framework, which is an efficient alternative to the classical method for the simulation of periodic unit cells. Assuming scale separation, the macroscopic and microscopic boundary value problems are first solved individually and subsequently linked by performing a scale transition in terms of averaging the macroscopic quantities over the corresponding local fields. While the macroscopic solution is computed by means of the finite element method, the microscopic boundary value problem, which is embedded as a periodic unit cell in each macroscopic integration point, is solved using an FFT‐based simulation method. In general, these microscopic simulations allow to model grain‐scale phenomena such as martensitic phase transformation or plastic deformation caused by dislocation glide which can be observed in polycrystalline materials. In this work, we present a two‐scale FE–FFT‐based model to capture the martensitic phase transformations in shape memory alloys. In order to demonstrate the applicability of the model, a numerical example is given.
- Open Access
- 5 September 2023
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 23 (2)
Efficient thermomechanically coupled FE‐FFT‐based multiscale simulation of polycrystals
In general, the overall macroscopic material behavior of any structural component is directly dependent on its underlying microstructure. For metal components, the associated microstructure is given in terms of a polycrystal. To enable the simulation of the related microstructural and overall elasto‐viscoplastic material behavior, a two‐scale simulation approach can be used. In this context, we use a FE‐FFT‐based two‐scale method, which is an efficient alternative to the classical FE2 method for the simulation of periodic microstructures. In addition, we consider a thermomechanically coupled framework to account for both thermal and mechanical loads. Finally, we incorporate a model order reduction technique based on a coarsely discretized microstructure to develop an efficient two‐scale simulation technique. As a demonstration of the feasibility of the proposed simulation framework, a numerical example will be investigated.
- 5 September 2023
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 23 (2)
Open AccessEfficient thermomechanically coupled FE‐FFT‐based multiscale simulation of polycrystals
In general, the overall macroscopic material behavior of any structural component is directly dependent on its underlying microstructure. For metal components, the associated microstructure is given in terms of a polycrystal. To enable the simulation of the related microstructural and overall elasto‐viscoplastic material behavior, a two‐scale simulation approach can be used. In this context, we use a FE‐FFT‐based two‐scale method, which is an efficient alternative to the classical FE2 method for the simulation of periodic microstructures. In addition, we consider a thermomechanically coupled framework to account for both thermal and mechanical loads. Finally, we incorporate a model order reduction technique based on a coarsely discretized microstructure to develop an efficient two‐scale simulation technique. As a demonstration of the feasibility of the proposed simulation framework, a numerical example will be investigated.
- Open Access
- 12 April 2022
- Published by Springer Nature in Archives of Computational Methods in Engineering
- Vol. 29 (6) , 4115-4135
A Review of FE-FFT-Based Two-Scale Methods for Computational Modeling of Microstructure Evolution and Macroscopic Material Behavior
The overall, macroscopic constitutive behavior of most materials of technological importance such as fiber-reinforced composites or polycrystals is very much influenced by the underlying microstructure. The latter is usually complex and heterogeneous in nature, where each phase constituent is governed by non-linear constitutive relations. In order to capture such micro-structural characteristics, numerical two-scale methods are often used. The purpose of the current work is to provide an overview of state-of-the-art finite element (FE) and FFT-based two-scale computational modeling of microstructure evolution and macroscopic material behavior. Spahn et al. (Comput Methods Appl Mech Eng 268:871–883, 2014) were the first to introduce this kind of FE-FFT-based methodology, which has emerged as an efficient and accurate tool to model complex materials across the scales in the recent years.
- 12 April 2022
- Published by Springer Nature in Archives of Computational Methods in Engineering
- Vol. 29 (6) , 4115-4135
Open AccessA Review of FE-FFT-Based Two-Scale Methods for Computational Modeling of Microstructure Evolution and Macroscopic Material Behavior
The overall, macroscopic constitutive behavior of most materials of technological importance such as fiber-reinforced composites or polycrystals is very much influenced by the underlying microstructure. The latter is usually complex and heterogeneous in nature, where each phase constituent is governed by non-linear constitutive relations. In order to capture such micro-structural characteristics, numerical two-scale methods are often used. The purpose of the current work is to provide an overview of state-of-the-art finite element (FE) and FFT-based two-scale computational modeling of microstructure evolution and macroscopic material behavior. Spahn et al. (Comput Methods Appl Mech Eng 268:871–883, 2014) were the first to introduce this kind of FE-FFT-based methodology, which has emerged as an efficient and accurate tool to model complex materials across the scales in the recent years.
- Open Access
- 14 December 2021
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 21 (1) , e202100061
A model order reduction technique for FFT‐based microstructure simulation using a geometrically adapted reduced set of frequencies
The FFT‐based method introduced by Moulinec and Suquet [9] serves as an alternative for the classical finite element based simulation of periodic microstructures. This simulation approach makes use of fast Fourier transforms (FFT) as well as fixed‐point iterations to solve the microscopic boundary value problem which is captured by the Lippmann‐Schwinger equation. Kochmann et al. [5] introduced a model order reduction technique using a reduced set of frequencies to decrease the computational effort of solving the Lippmann‐Schwinger equation in Fourier space. This earlier proposed method is based on a fixed sampling pattern, which determines the reduced set of frequencies. Instead of the fixed sampling pattern, we propose to use a geometrically adapted choice of frequencies, which corresponds to the representation of phases within the considered microstructure.
- 14 December 2021
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 21 (1) , e202100061
Open AccessA model order reduction technique for FFT‐based microstructure simulation using a geometrically adapted reduced set of frequencies
The FFT‐based method introduced by Moulinec and Suquet [9] serves as an alternative for the classical finite element based simulation of periodic microstructures. This simulation approach makes use of fast Fourier transforms (FFT) as well as fixed‐point iterations to solve the microscopic boundary value problem which is captured by the Lippmann‐Schwinger equation. Kochmann et al. [5] introduced a model order reduction technique using a reduced set of frequencies to decrease the computational effort of solving the Lippmann‐Schwinger equation in Fourier space. This earlier proposed method is based on a fixed sampling pattern, which determines the reduced set of frequencies. Instead of the fixed sampling pattern, we propose to use a geometrically adapted choice of frequencies, which corresponds to the representation of phases within the considered microstructure.
- 1 December 2021
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 386
A geometrically adapted reduced set of frequencies for a FFT-based microstructure simulation
- 1 December 2021
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 386
A geometrically adapted reduced set of frequencies for a FFT-based microstructure simulation
- Open Access
- 1 January 2021
- Published by AGH University Press in Computer Methods in Material Science
- Vol. 21 (1) , 51-58
FFT-based simulation using a reduced set of frequencies adapted to the underlying microstructure
Instead of the classical finite element (FE) based microstructure simulation, a Fast Fourier transform (FFT) based microstructure simulation, introduced by Moulinec and Suquet (1994, 1998), also enables the computation of highly resolved microstructural fields. In this context, the microscopic boundary value problem is captured by the Lippmann-Schwinger equation and solved by using Fast Fourier transforms (FFT) and fixed-point iterations. To decrease the computational effort of the fixed-point solver, Kochmann et al. (2019) introduced a model order reduction (MOR) technique based on solving the Lippmann-Schwinger equation in Fourier space with a reduced set of frequencies. Thereby, the accuracy of this MOR technique depends on the number of used frequencies and the choice of frequencies that are considered within the simulation. Instead of the earlier proposed fixed (Kochmann et al., 2019) or geometrically adapted (Gierden et al., 2021b) sampling patterns, we propose a sampling pattern which is updated after each load step based on the current strain. To show the precision of such a strain-based sampling pattern, an elasto-plastic two-phase composite microstructure is investigated.
- 1 January 2021
- Published by AGH University Press in Computer Methods in Material Science
- Vol. 21 (1) , 51-58
Open AccessFFT-based simulation using a reduced set of frequencies adapted to the underlying microstructure
Instead of the classical finite element (FE) based microstructure simulation, a Fast Fourier transform (FFT) based microstructure simulation, introduced by Moulinec and Suquet (1994, 1998), also enables the computation of highly resolved microstructural fields. In this context, the microscopic boundary value problem is captured by the Lippmann-Schwinger equation and solved by using Fast Fourier transforms (FFT) and fixed-point iterations. To decrease the computational effort of the fixed-point solver, Kochmann et al. (2019) introduced a model order reduction (MOR) technique based on solving the Lippmann-Schwinger equation in Fourier space with a reduced set of frequencies. Thereby, the accuracy of this MOR technique depends on the number of used frequencies and the choice of frequencies that are considered within the simulation. Instead of the earlier proposed fixed (Kochmann et al., 2019) or geometrically adapted (Gierden et al., 2021b) sampling patterns, we propose a sampling pattern which is updated after each load step based on the current strain. To show the precision of such a strain-based sampling pattern, an elasto-plastic two-phase composite microstructure is investigated.
- Open Access
- 18 November 2019
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 19 (1)
A model order reduction method for finite strain FFT solvers using a compressed sensing technique
We present a model order reduction (MOR) method for finite strain FFT solvers to reduce the computational costs of the FFT simulation scheme of a two‐scale FE‐FFT simulation. The underlying method is based on a reduced set of frequencies which leads to a reduced fixed‐point scheme. The reduced set of frequencies is determined offline, based on the Fourier grid and predominantly consists of low frequencies. After performing the entire simulation with this reduced set of frequencies, the compressed sensing technique is used to reconstruct highly resolved micromechanical fields in a post‐processing step. Compared to the unreduced solution scheme, a significant speed‐up in the CPU time at a negligibly small loss of accuracy in the overall solution is observed. As a numerical example an elastic composite in a finite strain setting is investigated.
- 18 November 2019
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 19 (1)
Open AccessA model order reduction method for finite strain FFT solvers using a compressed sensing technique
We present a model order reduction (MOR) method for finite strain FFT solvers to reduce the computational costs of the FFT simulation scheme of a two‐scale FE‐FFT simulation. The underlying method is based on a reduced set of frequencies which leads to a reduced fixed‐point scheme. The reduced set of frequencies is determined offline, based on the Fourier grid and predominantly consists of low frequencies. After performing the entire simulation with this reduced set of frequencies, the compressed sensing technique is used to reconstruct highly resolved micromechanical fields in a post‐processing step. Compared to the unreduced solution scheme, a significant speed‐up in the CPU time at a negligibly small loss of accuracy in the overall solution is observed. As a numerical example an elastic composite in a finite strain setting is investigated.