Shengqian Ruan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shengqian Ruan has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
Shikun Chen
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou, China
17 shared publicationsYi Liu
School of Materials Science and Engineering, Zhejiang University, Hangzhou, China
16 shared publicationsDongming Yan
15 shared publications- Dongming Yan
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
8 shared publications Rongfeng Gao
6 shared publicationsWenxin Wang
6 shared publications
Latest Publications
- 7 November 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (11)
Sulfuric Acid Degradation of Alkali‐Activated Fly Ash–Slag Binders: Multiscale Evolution and Paradoxical Role of Ca
Alkali‐activated fly ash–slag (AAFS) binders have attracted interest as alternative cementitious materials for applications exposed to sulfuric acid, for example, in sewer environments. However, how binder chemistry governs degradation behavior and resistance remains insufficiently understood, particularly regarding structural evolution and damage mechanisms. This study investigated AAFS binders with different precursor compositions (slag content: 10%–75%) and activator chemistries (dosage: 15% and 20%; Ms: 1 and 2) under sulfuric acid exposure, with weekly solution renewal at an initial pH of 1.0 (rising to 1.5–1.9 before renewal). Decreasing slag content generally reduced the 90‐day compressive strength before exposure. Higher activator dosage and Ms also resulted in slight reductions in strength. After a 90‐day exposure, the spatially continuous evolution of the residual gel skeleton across the degraded zone was tracked using multiscale imaging techniques and microhardness testing. The results revealed a paradoxical role of Ca. High‐Ca, slag‐rich AAFS formed denser matrices with greater acid–neutralization capacity, resulting in a 90‐day degradation depth up to 64.8% lower than that of low‐Ca AAFS. However, high‐Ca AAFS developed network cracking and a spalling‐prone weak layer due to decalcification, dealumination, and gypsum‐induced stress, retaining only 15.0%–29.7% of the unaffected‐matrix microhardness. In contrast, low‐Ca AAFS showed faster acid penetration but retained a more continuous, Al‐rich skeleton, with 36.4%–53.3% microhardness retention. These findings distinguish resistance to acid ingress from the preservation of residual‐skeleton integrity and provide new insights into degradation modes, gel‐skeleton evolution, and composition‐informed design of AAFS binders.
- 7 November 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (11)
Sulfuric Acid Degradation of Alkali‐Activated Fly Ash–Slag Binders: Multiscale Evolution and Paradoxical Role of Ca
Alkali‐activated fly ash–slag (AAFS) binders have attracted interest as alternative cementitious materials for applications exposed to sulfuric acid, for example, in sewer environments. However, how binder chemistry governs degradation behavior and resistance remains insufficiently understood, particularly regarding structural evolution and damage mechanisms. This study investigated AAFS binders with different precursor compositions (slag content: 10%–75%) and activator chemistries (dosage: 15% and 20%; Ms: 1 and 2) under sulfuric acid exposure, with weekly solution renewal at an initial pH of 1.0 (rising to 1.5–1.9 before renewal). Decreasing slag content generally reduced the 90‐day compressive strength before exposure. Higher activator dosage and Ms also resulted in slight reductions in strength. After a 90‐day exposure, the spatially continuous evolution of the residual gel skeleton across the degraded zone was tracked using multiscale imaging techniques and microhardness testing. The results revealed a paradoxical role of Ca. High‐Ca, slag‐rich AAFS formed denser matrices with greater acid–neutralization capacity, resulting in a 90‐day degradation depth up to 64.8% lower than that of low‐Ca AAFS. However, high‐Ca AAFS developed network cracking and a spalling‐prone weak layer due to decalcification, dealumination, and gypsum‐induced stress, retaining only 15.0%–29.7% of the unaffected‐matrix microhardness. In contrast, low‐Ca AAFS showed faster acid penetration but retained a more continuous, Al‐rich skeleton, with 36.4%–53.3% microhardness retention. These findings distinguish resistance to acid ingress from the preservation of residual‐skeleton integrity and provide new insights into degradation modes, gel‐skeleton evolution, and composition‐informed design of AAFS binders.
- 21 August 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 541
Degradation behavior and mechanism of recycled glass powder–cement binders under sulfuric acid attack
- 21 August 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 541
Degradation behavior and mechanism of recycled glass powder–cement binders under sulfuric acid attack
- 17 September 2025
- Published by Elsevier in Cement and Concrete Composites
- Vol. 165
Integral superhydrophobicity in cement matrix via in-situ hierarchical micro-nano roughness
- 17 September 2025
- Published by Elsevier in Cement and Concrete Composites
- Vol. 165
Integral superhydrophobicity in cement matrix via in-situ hierarchical micro-nano roughness
- Open Access
Early-Age Properties and Reaction of Hydrophobic Portland Cement and Alkali-Activated Fly Ash–Slag Pastes with Alkyl Silanes
Cementitious materials are susceptible to water ingress due to their hydrophilicity and porous microstructure, which can cause premature destruction and compromise long-term durability. Integral hydrophobic modification using alkyl silanes is an effective strategy for enhancing water resistance, while the influence of different silanes on early-age properties (within the first 7 d) of various binder systems remains unclear. This study investigates the rheology, flowability, setting behavior, reaction kinetics, compressive strength, and hydrophobicity of ordinary Portland cement (OPC) and alkali-activated fly ash–slag (AAFS) pastes incorporating alkyl silanes of varying alkyl chain lengths, i.e., methyl-(C1TMS), butyl-(C4TMS), octyl-(C8TMS), and dodecyl-trimethoxysilane (C12TMS). In OPC, C1TMS reduced yield stress and plastic viscosity by 33.6% and 21.0%, respectively, and improved flowability by 27.6%, whereas C4TMS, C8TMS, and C12TMS showed the opposite effects. In contrast, the effect of alkyl silanes on rheology and flowability of AAFS was less pronounced. Silanes delayed setting of OPC and AAFS by 5.6–164.4%, with shorter alkyl chains causing greater retardation. C1TMS and C4TMS inhibited early-age heat release and decreased the 1-day compressive strength by 14.8–35.7% in OPC and 82.0–84.5% in AAFS, whereas longer-chain silanes had comparatively minor effects. The hydrophobic performance in both binder systems was strongly correlated with alkyl chain length. C8TMS exhibited the best hydrophobicity in OPC, achieving a water contact angle of 145° and a 75.7% reduction in water sorptivity, while C4TMS demonstrated the highest hydrophobicity in AAFS. This study provides fundamental guidance for the rational selection of alkyl silanes in OPC and AAFS systems, offering insights into the design of multifunctional water-resistant cementitious composites for marine structures, building facades, and other applications with waterproofing requirements.
Open AccessEarly-Age Properties and Reaction of Hydrophobic Portland Cement and Alkali-Activated Fly Ash–Slag Pastes with Alkyl Silanes
Cementitious materials are susceptible to water ingress due to their hydrophilicity and porous microstructure, which can cause premature destruction and compromise long-term durability. Integral hydrophobic modification using alkyl silanes is an effective strategy for enhancing water resistance, while the influence of different silanes on early-age properties (within the first 7 d) of various binder systems remains unclear. This study investigates the rheology, flowability, setting behavior, reaction kinetics, compressive strength, and hydrophobicity of ordinary Portland cement (OPC) and alkali-activated fly ash–slag (AAFS) pastes incorporating alkyl silanes of varying alkyl chain lengths, i.e., methyl-(C1TMS), butyl-(C4TMS), octyl-(C8TMS), and dodecyl-trimethoxysilane (C12TMS). In OPC, C1TMS reduced yield stress and plastic viscosity by 33.6% and 21.0%, respectively, and improved flowability by 27.6%, whereas C4TMS, C8TMS, and C12TMS showed the opposite effects. In contrast, the effect of alkyl silanes on rheology and flowability of AAFS was less pronounced. Silanes delayed setting of OPC and AAFS by 5.6–164.4%, with shorter alkyl chains causing greater retardation. C1TMS and C4TMS inhibited early-age heat release and decreased the 1-day compressive strength by 14.8–35.7% in OPC and 82.0–84.5% in AAFS, whereas longer-chain silanes had comparatively minor effects. The hydrophobic performance in both binder systems was strongly correlated with alkyl chain length. C8TMS exhibited the best hydrophobicity in OPC, achieving a water contact angle of 145° and a 75.7% reduction in water sorptivity, while C4TMS demonstrated the highest hydrophobicity in AAFS. This study provides fundamental guidance for the rational selection of alkyl silanes in OPC and AAFS systems, offering insights into the design of multifunctional water-resistant cementitious composites for marine structures, building facades, and other applications with waterproofing requirements.
- 26 June 2025
- Published by Elsevier in Cement and Concrete Composites
- Vol. 163
Hydration products and hybridisation mechanisms of hydrophobic cement pastes with alkyl-organosilanes
- 26 June 2025
- Published by Elsevier in Cement and Concrete Composites
- Vol. 163
Hydration products and hybridisation mechanisms of hydrophobic cement pastes with alkyl-organosilanes
- 1 March 2025
- Published by Zhejiang University Press in Journal of Zhejiang University-SCIENCE A
- Vol. 26 (3) , 194-211
Evolution of waterproof performance, mechanical properties, and microstructure in hydrophobically-modified geopolymer concrete during dry-wet cycles
The waterproof performance, mechanical properties, chemical composition, microstructure, and pore structure of hydrophobically-modified geopolymer concrete
- 1 March 2025
- Published by Zhejiang University Press in Journal of Zhejiang University-SCIENCE A
- Vol. 26 (3) , 194-211
Evolution of waterproof performance, mechanical properties, and microstructure in hydrophobically-modified geopolymer concrete during dry-wet cycles
The waterproof performance, mechanical properties, chemical composition, microstructure, and pore structure of hydrophobically-modified geopolymer concrete
- 10 July 2024
- Published by Elsevier in Composites Part B: Engineering
- Vol. 284
Alkali-activated materials with organics: A critical review
- 10 July 2024
- Published by Elsevier in Composites Part B: Engineering
- Vol. 284
Alkali-activated materials with organics: A critical review
- Top Cited Papers
- 28 June 2024
- Published by Elsevier in Journal of Energy Storage
- Vol. 96
Improving the electrochemical performance of cement-based supercapacitors through microstructure optimization
- 28 June 2024
- Published by Elsevier in Journal of Energy Storage
- Vol. 96
Top Cited PapersImproving the electrochemical performance of cement-based supercapacitors through microstructure optimization
- 14 June 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 437
EIS investigation on electrical properties of metakaolin-based geopolymer
- 14 June 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 437
EIS investigation on electrical properties of metakaolin-based geopolymer
- Open Access
- 3 April 2024
- Published by Elsevier in SSRN Electronic Journal
Improving the Electrochemical Performance of Cement-Based Supercapacitors Through Microstructure Optimization
In the pursuit of integrating renewable energy systems seamlessly with our existing infrastructure, the imperative to devise innovative applications of construction materials for energy storage has become paramount. This study delves into the interplay among active materials, storage voids, and binders within supercapacitor electrodes—a field yet to fully realize its potential due to the high specific surface area of active materials and limitations in structural integrity. As a proof of concept, carbon black was incorporated into the cement matrix to simulate the synergistic relationships within the composite material. Herein, a strategy aimed at enhancing the balance among these essential components is introduced, employing pressure molding techniques to precisely control the volume of pore water in the electrodes. The inherent porosity of the cement matrix facilitates ion transport and storage, bolstering supercapacitor efficiency. Notably, increasing the CB content—despite sacrificing compressive strength to some extent—led to a significant increase in areal capacitance, soaring from 54 mF/cm² to an unparalleled 2188 mF/cm², alongside a notable increase in ionic conductivity (361.8 mS/cm). This research not only elucidates the complex synergy within cement-based supercapacitor electrodes but also positions cement-based materials as formidable pioneers in the supercapacitor market.
- 3 April 2024
- Published by Elsevier in SSRN Electronic Journal
Open AccessImproving the Electrochemical Performance of Cement-Based Supercapacitors Through Microstructure Optimization
In the pursuit of integrating renewable energy systems seamlessly with our existing infrastructure, the imperative to devise innovative applications of construction materials for energy storage has become paramount. This study delves into the interplay among active materials, storage voids, and binders within supercapacitor electrodes—a field yet to fully realize its potential due to the high specific surface area of active materials and limitations in structural integrity. As a proof of concept, carbon black was incorporated into the cement matrix to simulate the synergistic relationships within the composite material. Herein, a strategy aimed at enhancing the balance among these essential components is introduced, employing pressure molding techniques to precisely control the volume of pore water in the electrodes. The inherent porosity of the cement matrix facilitates ion transport and storage, bolstering supercapacitor efficiency. Notably, increasing the CB content—despite sacrificing compressive strength to some extent—led to a significant increase in areal capacitance, soaring from 54 mF/cm² to an unparalleled 2188 mF/cm², alongside a notable increase in ionic conductivity (361.8 mS/cm). This research not only elucidates the complex synergy within cement-based supercapacitor electrodes but also positions cement-based materials as formidable pioneers in the supercapacitor market.