Andrea Bergomi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrea Bergomi has a total of 127 co-authors. Here are the top co-authors by number of shared publications:
- Paola Fermo
Department of Chemistry, University of Milan, Via Golgi 19, 20133 Milan, Italy
17 shared publications - Valeria Comite
Dipartimento di Chimica, Università degli Studi di Milano, via Golgi 19, 20133 Milano, Italy
17 shared publications - Chiara Andrea Lombardi
Dipartimento di Chimica, Università degli Studi di Milano, via Golgi 19, 20133 Milano, Italy
13 shared publications - Mattia Borelli
Department of Chemistry, University of Milan, Milan, 20133, Italy
12 shared publications - Vittoria Guglielmi
Department of Chemistry, University of Milan, Via Golgi 19, 20133 Milan, Italy
10 shared publications Paola Fermo
8 shared publications
Latest Publications
- Open Access
Assessment of Air Quality Impacts from Wood-Fired Pizza Ovens: Comparison with Major Urban Emission Sources
Wood-fired ovens used in pizzerias represent a potential source of air pollution in urban areas. Local emission inventories indicate that restaurants and pizzerias with wood-fired ovens have a non-negligible contribution to the emission of several air pollutants, especially particulate matter and polycyclic aromatic hydrocarbons. This study presents an integrated framework combining data-driven source identification, experimentally measured emission factors, atmospheric dispersion modelling, and air quality observations to assess the impact of wood-fired pizza ovens in the urban context of Milan (Italy). To validate and strengthen the robustness of the modelling framework, analogous simulations were also performed for road traffic and heating systems, representing the major urban emission sources, and compared with measurements from the ARPA Lombardia monitoring network. Results showed that wood-fired oven emissions are concentrated in the city center and can contribute appreciably to local primary particulate matter concentrations (0.085–3.34 µg m−3 PM10). While their contribution to NOx concentrations is limited (0.0044–1.75 µg m−3), simulations indicated a measurable influence on biomass-burning tracers, including levoglucosan (19.70%, 34.28%) and benzo(a)pyrene (34.95%, 37.47%). Overall, wood-fired pizza ovens are not a dominant source of urban air pollution but represent a relevant local contributor to particulate matter and combustion-related tracers.
Open AccessAssessment of Air Quality Impacts from Wood-Fired Pizza Ovens: Comparison with Major Urban Emission Sources
Wood-fired ovens used in pizzerias represent a potential source of air pollution in urban areas. Local emission inventories indicate that restaurants and pizzerias with wood-fired ovens have a non-negligible contribution to the emission of several air pollutants, especially particulate matter and polycyclic aromatic hydrocarbons. This study presents an integrated framework combining data-driven source identification, experimentally measured emission factors, atmospheric dispersion modelling, and air quality observations to assess the impact of wood-fired pizza ovens in the urban context of Milan (Italy). To validate and strengthen the robustness of the modelling framework, analogous simulations were also performed for road traffic and heating systems, representing the major urban emission sources, and compared with measurements from the ARPA Lombardia monitoring network. Results showed that wood-fired oven emissions are concentrated in the city center and can contribute appreciably to local primary particulate matter concentrations (0.085–3.34 µg m−3 PM10). While their contribution to NOx concentrations is limited (0.0044–1.75 µg m−3), simulations indicated a measurable influence on biomass-burning tracers, including levoglucosan (19.70%, 34.28%) and benzo(a)pyrene (34.95%, 37.47%). Overall, wood-fired pizza ovens are not a dominant source of urban air pollution but represent a relevant local contributor to particulate matter and combustion-related tracers.
- Open Access
- 9 September 2026
- Published by MDPI AG in Preprints.org
Assessment of Air Quality Impacts from Wood-Fired Pizza Ovens: Comparison with Major Urban Emission Sources
Wood-fired ovens used in pizzerias represent a potential source of air pollution, particularly in urban areas where they are most concentrated. The combination of wood combustion and cooking operations is a distinctive feature of these appliances and results in a unique emission profile. Local emission inventories indicate that restaurants and pizzerias with wood-fired ovens have a non-negligible contribution to the emission of several air pollutants, especially particulate matter and polycyclic aromatic hydrocarbons. This study presents an integrated framework combining data-driven source identification, experimentally measured emission factors, atmospheric dispersion modelling, and air-quality observations to assess the impact of wood-fired pizza ovens in the urban context of Milan (Italy). To validate and strengthen the robustness of the modelling framework, analogous simulations were also performed for road traffic and heating systems, representing the major urban emission sources, and compared with measurements from the ARPA Lombardia monitoring network. Results showed that wood-fired oven emissions are concentrated in the city center and can contribute appreciably to local primary particulate matter concentrations (0.085 – 3.34 µg m−3 PM10). While their contribution to NOx concentrations is limited (0.0044 - 1.75 µg m−3), simulations indicated a measurable influence on biomass-burning tracers, including levoglucosan (19.70 - 34.28%) and benzo(a)pyrene (34.95 - 37.47%). Overall, wood-fired pizza ovens are not a dominant source of urban air pollution but represent a relevant local contributor to particulate matter and combustion-related tracers.
- 9 September 2026
- Published by MDPI AG in Preprints.org
Open AccessAssessment of Air Quality Impacts from Wood-Fired Pizza Ovens: Comparison with Major Urban Emission Sources
Wood-fired ovens used in pizzerias represent a potential source of air pollution, particularly in urban areas where they are most concentrated. The combination of wood combustion and cooking operations is a distinctive feature of these appliances and results in a unique emission profile. Local emission inventories indicate that restaurants and pizzerias with wood-fired ovens have a non-negligible contribution to the emission of several air pollutants, especially particulate matter and polycyclic aromatic hydrocarbons. This study presents an integrated framework combining data-driven source identification, experimentally measured emission factors, atmospheric dispersion modelling, and air-quality observations to assess the impact of wood-fired pizza ovens in the urban context of Milan (Italy). To validate and strengthen the robustness of the modelling framework, analogous simulations were also performed for road traffic and heating systems, representing the major urban emission sources, and compared with measurements from the ARPA Lombardia monitoring network. Results showed that wood-fired oven emissions are concentrated in the city center and can contribute appreciably to local primary particulate matter concentrations (0.085 – 3.34 µg m−3 PM10). While their contribution to NOx concentrations is limited (0.0044 - 1.75 µg m−3), simulations indicated a measurable influence on biomass-burning tracers, including levoglucosan (19.70 - 34.28%) and benzo(a)pyrene (34.95 - 37.47%). Overall, wood-fired pizza ovens are not a dominant source of urban air pollution but represent a relevant local contributor to particulate matter and combustion-related tracers.
- Open Access
- 15 May 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (9) , 6521-6539
Ventilation and low pollution enhancing new particle formation in Milan, Italy
New particle formation (NPF) is a crucial process that significantly affects the number of atmospheric particles, forming a substantial portion of the total aerosol population. Therefore, it has important implications for both human health and climate. While extensive research has been conducted in rural areas of the Po Valley, Italy, there is a substantial lack of continuous measurements with state-of-the-art instruments in Milan, one of the most industrialized and densely populated cities in the region. This study aims to address this gap by analysing one year of detailed particle number size distribution measurements between 1.2 and 480 nm at an urban background site in Milan. These data were used to examine the occurrence and characteristics of NPF and to identify how the meteorological and air pollution conditions affect it. We show that a cleaner atmosphere, meaning lower concentrations of air pollutants and lower condensation sink, and a higher ventilation promote NPF. Detailed modelling of the air masses history further revealed that a longer residence time in the Po Valley and a greater exposure to anthropogenic emissions inhibit NPF. Furthermore, we show that strong winds, particularly from the northwest sector (e.g., Foehn winds), facilitate NPF, likely by reducing the condensation sink for precursor vapours. This locates Milan among the urban sites where atmospheric cleaning enhances NPF, providing insights for urban air quality management.
- 15 May 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (9) , 6521-6539
Open AccessVentilation and low pollution enhancing new particle formation in Milan, Italy
New particle formation (NPF) is a crucial process that significantly affects the number of atmospheric particles, forming a substantial portion of the total aerosol population. Therefore, it has important implications for both human health and climate. While extensive research has been conducted in rural areas of the Po Valley, Italy, there is a substantial lack of continuous measurements with state-of-the-art instruments in Milan, one of the most industrialized and densely populated cities in the region. This study aims to address this gap by analysing one year of detailed particle number size distribution measurements between 1.2 and 480 nm at an urban background site in Milan. These data were used to examine the occurrence and characteristics of NPF and to identify how the meteorological and air pollution conditions affect it. We show that a cleaner atmosphere, meaning lower concentrations of air pollutants and lower condensation sink, and a higher ventilation promote NPF. Detailed modelling of the air masses history further revealed that a longer residence time in the Po Valley and a greater exposure to anthropogenic emissions inhibit NPF. Furthermore, we show that strong winds, particularly from the northwest sector (e.g., Foehn winds), facilitate NPF, likely by reducing the condensation sink for precursor vapours. This locates Milan among the urban sites where atmospheric cleaning enhances NPF, providing insights for urban air quality management.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Coupling Micro-Scale Stone Decay Measurements with Bedrock Fracture Analysis at the Castle of Mykonos
Quantifying stone decay rates in coastal heritage sites remains a major challenge, owing to strong spatial variability in environmental exposure and material properties. This study presents a combined micro-scale and macro-scale investigation of stone deterioration processes at the Castle of Mykonos, a medieval coastal fortification founded directly on crystalline bedrock and exposed to intense marine forcing.An in situ monitoring experiment was implemented to quantify stone surface recession over time. Corrosion-resistant reference plates (marine-grade 316 stainless steel) were installed on selected stone ashlars of different lithologies, and the surrounding surfaces were replicated using high-precision silicone moulds. Non-contact 3D optical profilometry was applied to the moulds to generate high-resolution surface models at time zero and after one year of exposure. Surface roughness parameters and elevation differences between stone surfaces and reference plates were computed to determine material loss rates with sub-millimetre accuracy.Petrographic analyses show that the castle masonry consists mainly of granitic and tonalitic orthogneisses, with subordinate crystalline marbles. These lithologies display markedly different deterioration behaviours. After one year, marble surfaces show negligible changes in roughness and elevation, indicating high resistance to salt-related decay. In contrast, gneissic stones exhibit severe surface recession and textural degradation, including preferential detachment of feldspar porphyroclasts. Quantitative measurements indicate average material losses of approximately 1.6 mm, locally reaching up to 2.7 mm, accompanied by a significant increase in surface roughness.Ion chromatography analyses of soluble salts reveal a strong marine signature, dominated by chlorides with subordinate sulphates. Salt concentrations are systematically higher at stone surfaces than in near-surface layers, but their spatial distribution does not correlate straightforwardly with proximity to the shoreline, highlighting the complexity of salt transport and accumulation processes in coastal masonry.At the macro-scale, photogrammetric surveys were conducted to assess the structural condition of the bedrock underlying a seawards-facing wall of the Church of Sotira (Panagia Paraportiani complex). Mapping of discontinuities reveals a dense network of steeply dipping conjugate joints and subordinate foliation-parallel planes, which subdivide the bedrock into decimetric blocks. Salt-enhanced joint opening, combined with the load of overlying masonry, promotes block detachment, progressive undercutting, and local instability of the foundation.The integration of quantitative micro-scale decay measurements with structural analysis of the supporting bedrock provides a robust framework for assessing deterioration rates and stability risks in coastal heritage sites, with direct implications for long-term monitoring and conservation planning. Acknowledgement:This research has been funded by European Union’s Horizon Europe research and innovation programme under THETIDA project (Grant Agreement No. 101095253) (Technologies and methods for improved resilience and sustainable preservation of underwater and coastal cultural heritage to cope with climate change, natural hazards and environmental pollution).
- 14 March 2026
- Published by Copernicus GmbH
Open AccessCoupling Micro-Scale Stone Decay Measurements with Bedrock Fracture Analysis at the Castle of Mykonos
Quantifying stone decay rates in coastal heritage sites remains a major challenge, owing to strong spatial variability in environmental exposure and material properties. This study presents a combined micro-scale and macro-scale investigation of stone deterioration processes at the Castle of Mykonos, a medieval coastal fortification founded directly on crystalline bedrock and exposed to intense marine forcing.An in situ monitoring experiment was implemented to quantify stone surface recession over time. Corrosion-resistant reference plates (marine-grade 316 stainless steel) were installed on selected stone ashlars of different lithologies, and the surrounding surfaces were replicated using high-precision silicone moulds. Non-contact 3D optical profilometry was applied to the moulds to generate high-resolution surface models at time zero and after one year of exposure. Surface roughness parameters and elevation differences between stone surfaces and reference plates were computed to determine material loss rates with sub-millimetre accuracy.Petrographic analyses show that the castle masonry consists mainly of granitic and tonalitic orthogneisses, with subordinate crystalline marbles. These lithologies display markedly different deterioration behaviours. After one year, marble surfaces show negligible changes in roughness and elevation, indicating high resistance to salt-related decay. In contrast, gneissic stones exhibit severe surface recession and textural degradation, including preferential detachment of feldspar porphyroclasts. Quantitative measurements indicate average material losses of approximately 1.6 mm, locally reaching up to 2.7 mm, accompanied by a significant increase in surface roughness.Ion chromatography analyses of soluble salts reveal a strong marine signature, dominated by chlorides with subordinate sulphates. Salt concentrations are systematically higher at stone surfaces than in near-surface layers, but their spatial distribution does not correlate straightforwardly with proximity to the shoreline, highlighting the complexity of salt transport and accumulation processes in coastal masonry.At the macro-scale, photogrammetric surveys were conducted to assess the structural condition of the bedrock underlying a seawards-facing wall of the Church of Sotira (Panagia Paraportiani complex). Mapping of discontinuities reveals a dense network of steeply dipping conjugate joints and subordinate foliation-parallel planes, which subdivide the bedrock into decimetric blocks. Salt-enhanced joint opening, combined with the load of overlying masonry, promotes block detachment, progressive undercutting, and local instability of the foundation.The integration of quantitative micro-scale decay measurements with structural analysis of the supporting bedrock provides a robust framework for assessing deterioration rates and stability risks in coastal heritage sites, with direct implications for long-term monitoring and conservation planning. Acknowledgement:This research has been funded by European Union’s Horizon Europe research and innovation programme under THETIDA project (Grant Agreement No. 101095253) (Technologies and methods for improved resilience and sustainable preservation of underwater and coastal cultural heritage to cope with climate change, natural hazards and environmental pollution).
- Open Access
An Integrated Diagnostic Approach to Deepen the Understanding of Michele di Matteo’s Wooden Panel Coronation of the Virgin
This study presents a non-invasive, integrated and multidisciplinary diagnostic approach applied to the analysis of the altarpiece Coronation of the Virgin, attributed to Michele di Matteo (15th century). The investigation focused on the evaluation of a restoration intervention carried out in 2023 using quantitative colorimetric measurements to assess chromatic variations induced by surface treatments. Other non-invasive techniques, including multispectral imaging, hyperspectral imaging, Raman spectroscopy, and visible reflectance spectroscopy, were employed to investigate the painted surface, examine underlying features, and support the characterization and spatial distribution of pictorial materials through comparison with reference standards. Finally, the proteinaceous binding media used by the artist were investigated using nano-liquid chromatography coupled with tandem mass spectrometry (nLC-MS/MS), a sensitive, high-resolution analytical approach in the field of cultural heritage studies. Overall, the integrated approach documented chromatic changes induced by cleaning, revealed the preparatory drawing and previously unknown decorative elements by infrared reflectography, and confirmed the presence of pigments previously identified in earlier studies, allowing, in some cases, for an investigation of their distribution across the painted surface. The characterization of proteinaceous binding media further contributed to a deeper understanding of the materials and techniques employed by the artist.
Open AccessAn Integrated Diagnostic Approach to Deepen the Understanding of Michele di Matteo’s Wooden Panel Coronation of the Virgin
This study presents a non-invasive, integrated and multidisciplinary diagnostic approach applied to the analysis of the altarpiece Coronation of the Virgin, attributed to Michele di Matteo (15th century). The investigation focused on the evaluation of a restoration intervention carried out in 2023 using quantitative colorimetric measurements to assess chromatic variations induced by surface treatments. Other non-invasive techniques, including multispectral imaging, hyperspectral imaging, Raman spectroscopy, and visible reflectance spectroscopy, were employed to investigate the painted surface, examine underlying features, and support the characterization and spatial distribution of pictorial materials through comparison with reference standards. Finally, the proteinaceous binding media used by the artist were investigated using nano-liquid chromatography coupled with tandem mass spectrometry (nLC-MS/MS), a sensitive, high-resolution analytical approach in the field of cultural heritage studies. Overall, the integrated approach documented chromatic changes induced by cleaning, revealed the preparatory drawing and previously unknown decorative elements by infrared reflectography, and confirmed the presence of pigments previously identified in earlier studies, allowing, in some cases, for an investigation of their distribution across the painted surface. The characterization of proteinaceous binding media further contributed to a deeper understanding of the materials and techniques employed by the artist.
- Open Access
- 22 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 112
Chemical and Radiometric Profiling of Indoor Particulate Matter in a Cultural Heritage Site: The Case of Saronno’s Sanctuary
Ensuring good air quality in indoor environments of historical and artistic significance is essential not only for protecting valuable artworks but also for safeguarding human health. While many studies in this field tend to focus on the preservation of cultural heritage, fewer have addressed the impact on visitors and worshippers. Yet, places such as museums, galleries, churches, and other religious sites attract large numbers of people, making indoor air quality a key factor for their well-being. This study focused on evaluating air quality within the Santuario della Beata Vergine dei Miracoli in Saronno, Italy, a religious site that welcomes large numbers of visitors and worshippers each year. A detailed analysis of particulate matter was conducted, including chemical characterization by ICP-MS for metals, ion chromatography for water-soluble ions, and thermal–optical analysis for the carbonaceous fraction, as well as assessments of size distribution and radiometric properties. The results indicated overall good air quality conditions: concentrations of heavy metals were below levels of concern (−3), and gross alpha, beta, and 137Cs activity concentrations remained below the minimum detectable thresholds. Hence, no significant health risks were identified.
- 22 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 112
Open AccessChemical and Radiometric Profiling of Indoor Particulate Matter in a Cultural Heritage Site: The Case of Saronno’s Sanctuary
Ensuring good air quality in indoor environments of historical and artistic significance is essential not only for protecting valuable artworks but also for safeguarding human health. While many studies in this field tend to focus on the preservation of cultural heritage, fewer have addressed the impact on visitors and worshippers. Yet, places such as museums, galleries, churches, and other religious sites attract large numbers of people, making indoor air quality a key factor for their well-being. This study focused on evaluating air quality within the Santuario della Beata Vergine dei Miracoli in Saronno, Italy, a religious site that welcomes large numbers of visitors and worshippers each year. A detailed analysis of particulate matter was conducted, including chemical characterization by ICP-MS for metals, ion chromatography for water-soluble ions, and thermal–optical analysis for the carbonaceous fraction, as well as assessments of size distribution and radiometric properties. The results indicated overall good air quality conditions: concentrations of heavy metals were below levels of concern (−3), and gross alpha, beta, and 137Cs activity concentrations remained below the minimum detectable thresholds. Hence, no significant health risks were identified.
- Open Access
Integrated Comprehensive Characterization of Black Crusts from Milan’s Monumental Cemetery: A Synergistic Approach Combining Conventional and Unconventional Analytical Techniques
Black crusts are degradation features found on stone buildings, offering valuable insights into local pollution sources. Their composition and structure reflect environmental conditions, making them important indicators for environmental and conservation studies. In this study, black crusts collected from funerary monuments in the Monumental Cemetery of Milan were comprehensively characterized using SEM-EDX, Raman spectroscopy, LIBS, and oxidative potential (OP) assays. SEM-EDX and Raman spectroscopy revealed extensive degradation of the substrate and the incorporation of pollutant-derived particles, with heavy metals such as Fe, Zn, and Pb detected in more than 90% of the samples. Correlation analysis proved effective in distinguishing major pollution sources, primarily vehicular and railway traffic, indicated by strong associations such as Zn–Mn (r = 0.896), Fe–Zn (r = 0.734), and Fe–Mn (r = 0.655), from minor sources linked to industrial emissions, reflected in correlations including Ti–Pb (r = 0.589), Pb–Cl (r = 0.702), and S–Pb (r = 0.661). Instead, LIBS analysis confirmed stratigraphic penetration of these elements beyond the surface layers, suggesting long-term accumulation. OP assays, applied here for the first time to black crusts, showed values between 0.5 and 3.0 pmol min−1 µg−1, indicating moderate oxidative reactivity linked to metal content. Overall, the findings contribute to a deeper understanding of pollution-driven stone decay and support the development of more effective diagnostic and conservation strategies.
Open AccessIntegrated Comprehensive Characterization of Black Crusts from Milan’s Monumental Cemetery: A Synergistic Approach Combining Conventional and Unconventional Analytical Techniques
Black crusts are degradation features found on stone buildings, offering valuable insights into local pollution sources. Their composition and structure reflect environmental conditions, making them important indicators for environmental and conservation studies. In this study, black crusts collected from funerary monuments in the Monumental Cemetery of Milan were comprehensively characterized using SEM-EDX, Raman spectroscopy, LIBS, and oxidative potential (OP) assays. SEM-EDX and Raman spectroscopy revealed extensive degradation of the substrate and the incorporation of pollutant-derived particles, with heavy metals such as Fe, Zn, and Pb detected in more than 90% of the samples. Correlation analysis proved effective in distinguishing major pollution sources, primarily vehicular and railway traffic, indicated by strong associations such as Zn–Mn (r = 0.896), Fe–Zn (r = 0.734), and Fe–Mn (r = 0.655), from minor sources linked to industrial emissions, reflected in correlations including Ti–Pb (r = 0.589), Pb–Cl (r = 0.702), and S–Pb (r = 0.661). Instead, LIBS analysis confirmed stratigraphic penetration of these elements beyond the surface layers, suggesting long-term accumulation. OP assays, applied here for the first time to black crusts, showed values between 0.5 and 3.0 pmol min−1 µg−1, indicating moderate oxidative reactivity linked to metal content. Overall, the findings contribute to a deeper understanding of pollution-driven stone decay and support the development of more effective diagnostic and conservation strategies.
- Open Access
- 27 November 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-28
Comment on egusphere-2025-2387
New Particle Formation (NPF) is a crucial process that significantly affects the number of atmospheric particles, forming a substantial portion of the total aerosol population. Therefore, it has important implications for both human health and climate. While extensive research has been conducted in rural areas of the Po Valley, Italy, there is a substantial lack of continuous measurements with state-of-the-art instruments in Milan, one of the most industrialized and densely populated cities in the region. This study aims to address this gap by analysing one year of detailed particle number size distribution measurements between 1.2 and 480 nm at an urban background site in Milan. These data were used to examine the occurrence and characteristics of NPF and to identify how the meteorological and air pollution conditions affect it. We show that a cleaner atmosphere, meaning lower concentrations of air pollutants and lower condensation sink, and a higher ventilation promote NPF. Detailed modelling of the air masses history further revealed that a longer residence time in the Po Valley and a greater exposure to anthropogenic emission sources inhibit NPF. Furthermore, we show that strong winds, particularly from the northwest sector (e.g., Foehn winds), facilitate NPF, likely by reducing the condensation sink for precursor vapours. This locates Milan among the urban sites where atmospheric cleaning enhances NPF, providing insights for urban air quality management.
- 27 November 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-28
Open AccessComment on egusphere-2025-2387
New Particle Formation (NPF) is a crucial process that significantly affects the number of atmospheric particles, forming a substantial portion of the total aerosol population. Therefore, it has important implications for both human health and climate. While extensive research has been conducted in rural areas of the Po Valley, Italy, there is a substantial lack of continuous measurements with state-of-the-art instruments in Milan, one of the most industrialized and densely populated cities in the region. This study aims to address this gap by analysing one year of detailed particle number size distribution measurements between 1.2 and 480 nm at an urban background site in Milan. These data were used to examine the occurrence and characteristics of NPF and to identify how the meteorological and air pollution conditions affect it. We show that a cleaner atmosphere, meaning lower concentrations of air pollutants and lower condensation sink, and a higher ventilation promote NPF. Detailed modelling of the air masses history further revealed that a longer residence time in the Po Valley and a greater exposure to anthropogenic emission sources inhibit NPF. Furthermore, we show that strong winds, particularly from the northwest sector (e.g., Foehn winds), facilitate NPF, likely by reducing the condensation sink for precursor vapours. This locates Milan among the urban sites where atmospheric cleaning enhances NPF, providing insights for urban air quality management.
- Open Access
Non-Invasive Multi-Analytical Insights into Renaissance Wall Paintings by Bernardino Luini
The findings of non-invasive, multi-analytical research on two wall paintings located in the Santuario della Beata Vergine dei Miracoli in Saronno (Varese, Italy)—The Marriage of the Virgin and The Adoration of the Christ Child—are presented in this paper. The authorship of the latter is up for controversy, while the former is unquestionably attributed to Bernardino Luini. The objective was to assess the compatibility of their color palettes through material comparison. A complementary suite of non-invasive techniques, including X-ray fluorescence (XRF), external reflection FTIR, Raman, visible reflectance spectroscopy and hyperspectral imaging, were employed to characterize pigments and surface materials without sampling. Results confirm the use of historically consistent pigments such as calcium carbonate, ochres, Naples yellow, smalt, azurite and lapis lazuli. Differences in the application of blue pigments—lapis lazuli in The Marriage of the Virgin and azurite in The Adoration of the Christ Child—may reflect workshop variation rather than separate authorship. Spectral imaging revealed pigment mixing and layering strategies, especially in skin tones and shadow modeling. This study underscores the significance of diagnostics as an interpretive instrument, capable of contextualizing Luini’s paintings within the context of Renaissance creative practice, providing a framework relevant to analogous inquiries.
Open AccessNon-Invasive Multi-Analytical Insights into Renaissance Wall Paintings by Bernardino Luini
The findings of non-invasive, multi-analytical research on two wall paintings located in the Santuario della Beata Vergine dei Miracoli in Saronno (Varese, Italy)—The Marriage of the Virgin and The Adoration of the Christ Child—are presented in this paper. The authorship of the latter is up for controversy, while the former is unquestionably attributed to Bernardino Luini. The objective was to assess the compatibility of their color palettes through material comparison. A complementary suite of non-invasive techniques, including X-ray fluorescence (XRF), external reflection FTIR, Raman, visible reflectance spectroscopy and hyperspectral imaging, were employed to characterize pigments and surface materials without sampling. Results confirm the use of historically consistent pigments such as calcium carbonate, ochres, Naples yellow, smalt, azurite and lapis lazuli. Differences in the application of blue pigments—lapis lazuli in The Marriage of the Virgin and azurite in The Adoration of the Christ Child—may reflect workshop variation rather than separate authorship. Spectral imaging revealed pigment mixing and layering strategies, especially in skin tones and shadow modeling. This study underscores the significance of diagnostics as an interpretive instrument, capable of contextualizing Luini’s paintings within the context of Renaissance creative practice, providing a framework relevant to analogous inquiries.
- Open Access
- 11 September 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-28
Comment on egusphere-2025-2387
New Particle Formation (NPF) is a crucial process that significantly affects the number of atmospheric particles, forming a substantial portion of the total aerosol population. Therefore, it has important implications for both human health and climate. While extensive research has been conducted in rural areas of the Po Valley, Italy, there is a substantial lack of continuous measurements with state-of-the-art instruments in Milan, one of the most industrialized and densely populated cities in the region. This study aims to address this gap by analysing one year of detailed particle number size distribution measurements between 1.2 and 480 nm at an urban background site in Milan. These data were used to examine the occurrence and characteristics of NPF and to identify how the meteorological and air pollution conditions affect it. We show that a cleaner atmosphere, meaning lower concentrations of air pollutants and lower condensation sink, and a higher ventilation promote NPF. Detailed modelling of the air masses history further revealed that a longer residence time in the Po Valley and a greater exposure to anthropogenic emission sources inhibit NPF. Furthermore, we show that strong winds, particularly from the northwest sector (e.g., Foehn winds), facilitate NPF, likely by reducing the condensation sink for precursor vapours. This locates Milan among the urban sites where atmospheric cleaning enhances NPF, providing insights for urban air quality management.
- 11 September 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-28
Open AccessComment on egusphere-2025-2387
New Particle Formation (NPF) is a crucial process that significantly affects the number of atmospheric particles, forming a substantial portion of the total aerosol population. Therefore, it has important implications for both human health and climate. While extensive research has been conducted in rural areas of the Po Valley, Italy, there is a substantial lack of continuous measurements with state-of-the-art instruments in Milan, one of the most industrialized and densely populated cities in the region. This study aims to address this gap by analysing one year of detailed particle number size distribution measurements between 1.2 and 480 nm at an urban background site in Milan. These data were used to examine the occurrence and characteristics of NPF and to identify how the meteorological and air pollution conditions affect it. We show that a cleaner atmosphere, meaning lower concentrations of air pollutants and lower condensation sink, and a higher ventilation promote NPF. Detailed modelling of the air masses history further revealed that a longer residence time in the Po Valley and a greater exposure to anthropogenic emission sources inhibit NPF. Furthermore, we show that strong winds, particularly from the northwest sector (e.g., Foehn winds), facilitate NPF, likely by reducing the condensation sink for precursor vapours. This locates Milan among the urban sites where atmospheric cleaning enhances NPF, providing insights for urban air quality management.