Abdulrahman A. Halwani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abdulrahman A. Halwani has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Essam A. Tawfik
Advanced Diagnostics and Therapeutics Institute, Health Sector, King Abdulaziz City for Science and Technology, Riyadh 11442, Saudi Arabia
4 shared publications - Alhassan H. Aodah
Advanced Diagnostics and Therapeutics Institute, Health Sector, King Abdulaziz City for Science and Technology (KACST), Riyadh 11442, Saudi Arabia
3 shared publications - Hibah Mubarak Aldawsari
Department of Pharmaceutics, Faculty of Pharmacy, King Abdulaziz University
3 shared publications - Nabil Abdulhafiz Alhakamy
Department of Pharmaceutics, Faculty of Pharmacy, King Abdulaziz University, Jeddah 21589, Saudi Arabia
3 shared publications - Rana Bakur Bakhaidar
Department of Pharmaceutics, Faculty of Pharmacy King Abdulaziz University Jeddah Saudi Arabia
3 shared publications - Shaimaa M. Badr-Eldin
Department of Pharmaceutics, Faculty of Pharmacy, King Abdulaziz University, Jeddah, Saudi Arabia
3 shared publications
Latest Publications
- Open Access
- 12 June 2024
- Published by Elsevier in Journal of Drug Delivery Science and Technology
- Vol. 98
Fabrication and evaluation of centrifugal spun Miconazole-loaded sugar-based fibers
- 12 June 2024
- Published by Elsevier in Journal of Drug Delivery Science and Technology
- Vol. 98
Open AccessFabrication and evaluation of centrifugal spun Miconazole-loaded sugar-based fibers
- RetractionOpen Access
- 27 May 2024
- Published by MDPI AG in Pharmaceutics
- Vol. 16 (6) , 721
RETRACTED: Aldawsari et al. Gum Acacia Functionalized Colloidal Gold Nanoparticles of Letrozole as Biocompatible Drug Delivery Carrier for Treatment of Breast Cancer. Pharmaceutics 2021, 13, 1554
The Pharmaceutics Editorial Office retracts the article, “Gum Acacia Functionalized Colloidal Gold Nanoparticles of Letrozole as Biocompatible Drug Delivery Carrier for Treatment of Breast Cancer”
- 27 May 2024
- Published by MDPI AG in Pharmaceutics
- Vol. 16 (6) , 721
RetractionOpen AccessRETRACTED: Aldawsari et al. Gum Acacia Functionalized Colloidal Gold Nanoparticles of Letrozole as Biocompatible Drug Delivery Carrier for Treatment of Breast Cancer. Pharmaceutics 2021, 13, 1554
The Pharmaceutics Editorial Office retracts the article, “Gum Acacia Functionalized Colloidal Gold Nanoparticles of Letrozole as Biocompatible Drug Delivery Carrier for Treatment of Breast Cancer”
- Open Access
- 1 May 2024
- Published by Springer Nature in Saudi Pharmaceutical Journal
- Vol. 32 (5) , 102038
Development and evaluation of sildenafil/glycyrrhizin-loaded nanofibers as a potential novel buccal delivery system for erectile dysfunction
Erectile dysfunction (ED) is a growing health condition that needs safe and effective therapy. One of the main common treatments is sildenafil which is used in clinics for managing erectile dysfunction by enhancing the blood supply to the penis. In the current study, sildenafil was formulated as nanofibers and mixed with the root extract of Glycyrrhiza glabra (glycyrrhizin) as a natural sweetener to be administrated in the buccal cavity for enhanced drug bioavailability, rapid drug absorption and improved patient compliance. The formulated dual-loaded nanofibers were evaluated by measuring diameter, disintegration, drug loading efficiency, drug release profile, and in vitro cell viability assessment. The results showed that the sildenafil/glycyrrhizin-loaded fibers had a diameter of 0.719 ± 0.177 μm and lacked any beads and pores formation on their surfaces. The drug loading and encapsulation efficiency for sildenafil were measured as 52 ± 7 µg/mg and 67 ± 9 %, respectively, while they were 290 ± 32 μg/mg and 94 ± 10 %, respectively, for glycyrrhizin. The release rate of sildenafil and glycyrrhizin demonstrated a burst release in the first minute, followed by a gradual increment until a complete release after 120 min. The in vitro cell viability evaluation exhibited that the application of sildenafil and glycyrrhizin is safe upon 24-hour treatment on human skin fibroblast cells at all used concentrations (i.e., ≤ 1,000 and 4,000 μg/mL, respectively). However, the application of sildenafil-glycyrrhizin combination (in a ratio of 1:4) demonstrated more than 80 % cell viability at concentrations of ≤ 250 and 1000 μg/mL, respectively, following 24-hour cell exposure. Therefore, sildenafil/glycyrrhizin dual-loaded PVP nanofibers showed a potential buccal therapeutic approach for erectile dysfunction management.
- 1 May 2024
- Published by Springer Nature in Saudi Pharmaceutical Journal
- Vol. 32 (5) , 102038
Open AccessDevelopment and evaluation of sildenafil/glycyrrhizin-loaded nanofibers as a potential novel buccal delivery system for erectile dysfunction
Erectile dysfunction (ED) is a growing health condition that needs safe and effective therapy. One of the main common treatments is sildenafil which is used in clinics for managing erectile dysfunction by enhancing the blood supply to the penis. In the current study, sildenafil was formulated as nanofibers and mixed with the root extract of Glycyrrhiza glabra (glycyrrhizin) as a natural sweetener to be administrated in the buccal cavity for enhanced drug bioavailability, rapid drug absorption and improved patient compliance. The formulated dual-loaded nanofibers were evaluated by measuring diameter, disintegration, drug loading efficiency, drug release profile, and in vitro cell viability assessment. The results showed that the sildenafil/glycyrrhizin-loaded fibers had a diameter of 0.719 ± 0.177 μm and lacked any beads and pores formation on their surfaces. The drug loading and encapsulation efficiency for sildenafil were measured as 52 ± 7 µg/mg and 67 ± 9 %, respectively, while they were 290 ± 32 μg/mg and 94 ± 10 %, respectively, for glycyrrhizin. The release rate of sildenafil and glycyrrhizin demonstrated a burst release in the first minute, followed by a gradual increment until a complete release after 120 min. The in vitro cell viability evaluation exhibited that the application of sildenafil and glycyrrhizin is safe upon 24-hour treatment on human skin fibroblast cells at all used concentrations (i.e., ≤ 1,000 and 4,000 μg/mL, respectively). However, the application of sildenafil-glycyrrhizin combination (in a ratio of 1:4) demonstrated more than 80 % cell viability at concentrations of ≤ 250 and 1000 μg/mL, respectively, following 24-hour cell exposure. Therefore, sildenafil/glycyrrhizin dual-loaded PVP nanofibers showed a potential buccal therapeutic approach for erectile dysfunction management.
- Open Access
- 1 August 2023
- Published by Springer Nature in Saudi Pharmaceutical Journal
- Vol. 31 (8) , 101674
Current status and vision of local pharmaceutical industries in Saudi Arabia: The focus on nanomedicines
Pharmaceutical nanomedicine products are expected to impact the global pharmaceutical market and healthcare system significantly. Since 2000, the Food and Drug Administration (FDA) and European Medicines Agency (EMA) have approved over 80 nanomedicine products for marketing; an additional double that number is currently being tested in clinical trials. The nanomedicine market is expected to reach USD 350.8 billion by 2025 from USD 138.8 billion in 2016. This demonstrates the importance of nanotechnology to the delivery of pharmaceuticals. The main benefits of employing nanotechnology to distribute therapeutic agents include reducing the undesired toxicity from non-specific distribution and increasing patient adherence, which can indirectly minimize the burden on the country's healthcare system. Such products are expected to gain a significant economic impact on Saudi Arabia’s pharmaceutical drugs market once they get developed locally. A descriptive and cross-sectional study, including a web-based questionnaire and a complete categorization of pharmaceutical products formed by the national industries in Saudi Arabia, was utilized to investigate the current and future direction of pharmaceutical manufacturing exploiting nanotechnology in the Kingdom. The survey showed an apparent lack of willingness within the national pharmaceutical industries, as the majority (≈ 86%) of the leading Saudi companies cannot enable nanotechnology-based medicines in their manufacturing. However, more than 93% of the national pharmaceutical industries, upon the basis of the responses, agreed that the development of pharmaceutical products with nanotechnology is an important step toward solving various complications associated with conventional forms of the available medicine. National pharmaceutical industries in Saudi Arabia will need to get closer to manufacturing nanomedicines by partnering with international pioneer companies. In addition, empowering the local research and development (R&D) centers in nano delivery systems could facilitate translating their R&D outcomes into novel advanced and commercialized products. This could imitate the direction of the global pharmaceutical market and share its revenue which will positively reflect on the Kingdom's economy.
- 1 August 2023
- Published by Springer Nature in Saudi Pharmaceutical Journal
- Vol. 31 (8) , 101674
Open AccessCurrent status and vision of local pharmaceutical industries in Saudi Arabia: The focus on nanomedicines
Pharmaceutical nanomedicine products are expected to impact the global pharmaceutical market and healthcare system significantly. Since 2000, the Food and Drug Administration (FDA) and European Medicines Agency (EMA) have approved over 80 nanomedicine products for marketing; an additional double that number is currently being tested in clinical trials. The nanomedicine market is expected to reach USD 350.8 billion by 2025 from USD 138.8 billion in 2016. This demonstrates the importance of nanotechnology to the delivery of pharmaceuticals. The main benefits of employing nanotechnology to distribute therapeutic agents include reducing the undesired toxicity from non-specific distribution and increasing patient adherence, which can indirectly minimize the burden on the country's healthcare system. Such products are expected to gain a significant economic impact on Saudi Arabia’s pharmaceutical drugs market once they get developed locally. A descriptive and cross-sectional study, including a web-based questionnaire and a complete categorization of pharmaceutical products formed by the national industries in Saudi Arabia, was utilized to investigate the current and future direction of pharmaceutical manufacturing exploiting nanotechnology in the Kingdom. The survey showed an apparent lack of willingness within the national pharmaceutical industries, as the majority (≈ 86%) of the leading Saudi companies cannot enable nanotechnology-based medicines in their manufacturing. However, more than 93% of the national pharmaceutical industries, upon the basis of the responses, agreed that the development of pharmaceutical products with nanotechnology is an important step toward solving various complications associated with conventional forms of the available medicine. National pharmaceutical industries in Saudi Arabia will need to get closer to manufacturing nanomedicines by partnering with international pioneer companies. In addition, empowering the local research and development (R&D) centers in nano delivery systems could facilitate translating their R&D outcomes into novel advanced and commercialized products. This could imitate the direction of the global pharmaceutical market and share its revenue which will positively reflect on the Kingdom's economy.
- Open Access
Fabrication and Characterizations of Pharmaceutical Emulgel Co-Loaded with Naproxen-Eugenol for Improved Analgesic and Anti-Inflammatory Effects
The aim of this study was to fabricate and characterize a pharmaceutical emulgel co-loaded with naproxen/eugenol for transdermal delivery to improve the analgesic and anti-inflammatory effects and to eliminate GIT adverse reactions. Emulgel was prepared using a slow emulsification method and evaluated for physical appearance, thermodynamic stability, viscosity, pH, spreadability, extrudability, in-vitro drug release, drug content, ex-vivo permeation, drug retention studies and in-vivo studies. The emulgel exhibited good physical attributes, being thermodynamically stable with no phase separation, having excellent homogeneity, and pH 5.5 to 6.5. Slight changes in viscosity, spreadability and extrudability with respect to high temperature were observed (p > 0.05). The drug content was 96.69 ± 1.18% and 97.24 ± 1.27% for naproxen and eugenol, respectively. The maximum release of naproxen after 12 h was 85.14 ± 1.11%, whereas eugenol was 86.67 ± 1.23% from emulgel following anomalous non-Fickian mechanism. The maximum % permeation of naproxen across skin was 78.5 ± 1.30, whereas maximum % permeation of eugenol was 83.7 ± 1.33 after 12 h. The skin retention of eugenol and naproxen was 8.52 ± 0.22% and 6.98 ± 0.24%, respectively. The optimized emulgel inhibited the carrageenan induced paw edema. The pain reaction times of optimized emulgel and standard marketed product (Voltral®) were 11.16 ± 0.17 and 10.36 ± 0.47, respectively, with no statistically significant difference (p > 0.05). This study concluded that transdermal delivery of naproxen-eugenol emulgel synergized the anti-inflammatory and analgesic effects of naproxen and eugenol.
Open AccessFabrication and Characterizations of Pharmaceutical Emulgel Co-Loaded with Naproxen-Eugenol for Improved Analgesic and Anti-Inflammatory Effects
The aim of this study was to fabricate and characterize a pharmaceutical emulgel co-loaded with naproxen/eugenol for transdermal delivery to improve the analgesic and anti-inflammatory effects and to eliminate GIT adverse reactions. Emulgel was prepared using a slow emulsification method and evaluated for physical appearance, thermodynamic stability, viscosity, pH, spreadability, extrudability, in-vitro drug release, drug content, ex-vivo permeation, drug retention studies and in-vivo studies. The emulgel exhibited good physical attributes, being thermodynamically stable with no phase separation, having excellent homogeneity, and pH 5.5 to 6.5. Slight changes in viscosity, spreadability and extrudability with respect to high temperature were observed (p > 0.05). The drug content was 96.69 ± 1.18% and 97.24 ± 1.27% for naproxen and eugenol, respectively. The maximum release of naproxen after 12 h was 85.14 ± 1.11%, whereas eugenol was 86.67 ± 1.23% from emulgel following anomalous non-Fickian mechanism. The maximum % permeation of naproxen across skin was 78.5 ± 1.30, whereas maximum % permeation of eugenol was 83.7 ± 1.33 after 12 h. The skin retention of eugenol and naproxen was 8.52 ± 0.22% and 6.98 ± 0.24%, respectively. The optimized emulgel inhibited the carrageenan induced paw edema. The pain reaction times of optimized emulgel and standard marketed product (Voltral®) were 11.16 ± 0.17 and 10.36 ± 0.47, respectively, with no statistically significant difference (p > 0.05). This study concluded that transdermal delivery of naproxen-eugenol emulgel synergized the anti-inflammatory and analgesic effects of naproxen and eugenol.
- Open Access
Biodegradable Polymers-Based Smart Nanocrystals for Loxoprofen Delivery with Enhanced Solubility: Design, Fabrication and Physical Characterizations
Nanocrystals are carrier-free, submicron-sized, colloidal drug delivery systems with particle sizes in the mean nanometer range. Nanocrystals have high bioavailability and fast absorption because of their high dissolution velocity and enhanced adhesiveness to cell membranes. Loxoprofen, a nonsteroidal anti-inflammatory drug belonging to the Biopharmaceutical Classification System (BCS) II drug class, was selected as the model drug. The aim of this study was to formulate nanocrystals of loxoprofen. A total of 12 formulations (F1 to F12) were prepared. An antisolvent technique was used to determine the effects of various stabilizers and processing conditions on the optimization of formulations. The various stabilizers used were hydroxypropyl methylcellulose (0.5%), polyvinylpyrrolidone (0.5%), and sodium lauryl sulfate (0.1%). The various characterizations conducted for this research included stability studies at 25 °C and 4 °C, scanning electron microscopy, transmission electron microscopy (TEM), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), zeta potentials, polydispersity indexes, and dissolution studies. F10 was the optimized formulation that showed stability at room temperature, as well as at a refrigerated temperature, for 30 days. A high dissolution rate (100% within the first 10 min) was shown by comparative dissolution studies of nano-suspensions with the micro-suspension and raw loxoprofen. F10 formulation had a non-porous and crystalline morphology on evaluation by TEM and XRPD, respectively, and the average particle size was 300 ± 0.3 nm as confirmed by TEM. DSC recorded a reduction in the melting point (180 °C processed and 200 °C unprocessed melting points). The dissolution rate and solubility of the formulated loxoprofen nanocrystals were significantly enhanced. It can be concluded that selecting suitable stabilizers (i.e., polymers and surfactants) can produce stable nanocrystals, and this can potentially lead to a scaling up of the process for commercialization.
Open AccessBiodegradable Polymers-Based Smart Nanocrystals for Loxoprofen Delivery with Enhanced Solubility: Design, Fabrication and Physical Characterizations
Nanocrystals are carrier-free, submicron-sized, colloidal drug delivery systems with particle sizes in the mean nanometer range. Nanocrystals have high bioavailability and fast absorption because of their high dissolution velocity and enhanced adhesiveness to cell membranes. Loxoprofen, a nonsteroidal anti-inflammatory drug belonging to the Biopharmaceutical Classification System (BCS) II drug class, was selected as the model drug. The aim of this study was to formulate nanocrystals of loxoprofen. A total of 12 formulations (F1 to F12) were prepared. An antisolvent technique was used to determine the effects of various stabilizers and processing conditions on the optimization of formulations. The various stabilizers used were hydroxypropyl methylcellulose (0.5%), polyvinylpyrrolidone (0.5%), and sodium lauryl sulfate (0.1%). The various characterizations conducted for this research included stability studies at 25 °C and 4 °C, scanning electron microscopy, transmission electron microscopy (TEM), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), zeta potentials, polydispersity indexes, and dissolution studies. F10 was the optimized formulation that showed stability at room temperature, as well as at a refrigerated temperature, for 30 days. A high dissolution rate (100% within the first 10 min) was shown by comparative dissolution studies of nano-suspensions with the micro-suspension and raw loxoprofen. F10 formulation had a non-porous and crystalline morphology on evaluation by TEM and XRPD, respectively, and the average particle size was 300 ± 0.3 nm as confirmed by TEM. DSC recorded a reduction in the melting point (180 °C processed and 200 °C unprocessed melting points). The dissolution rate and solubility of the formulated loxoprofen nanocrystals were significantly enhanced. It can be concluded that selecting suitable stabilizers (i.e., polymers and surfactants) can produce stable nanocrystals, and this can potentially lead to a scaling up of the process for commercialization.
- Open Access
- 28 April 2022
- Published by MDPI AG in Pharmaceuticals
- Vol. 15 (5) , 544
Adenosine Conjugated Docetaxel Nanoparticles—Proof of Concept Studies for Non-Small Cell Lung Cancer
Non-small cell lung cancer, a molecularly diverse disease, is the most prevalent cause of cancer mortality globally. Increasing understanding of the clinicopathology of the disease and mechanisms of tumor progression has facilitated early detection and multimodal care. Despite the advancements, survival rates are extremely low due to non-targeted therapeutics and correspondingly increased risk of metastasis. At some phases of cancer, patients need to face the ghost of chemotherapy. It is a difficult decision near the end of life. Such treatments have the capability to prolong survival or reduce symptoms, but can cause serious adverse effects, affecting quality of life of the patient. It is evident that many patients do not die from burden of the disease alone, but they die due to the toxic effect of treatment. Thus, increasing the efficacy is one aspect and decreasing the toxicity is another critical aspect of cancer formulation design. Through our current research, we tried to uncover both mentioned potentials of the formulation. Therefore, we designed actively targeted nanoparticles for improved therapeutics considering the overexpression of adenosine (ADN) receptors on non-small cell lung cancer (NSCLC) cells. Docetaxel (DTX), an essential therapeutic as part of combination therapy or as monotherapy for the treatment of NSCLC, was encapsulated in biodegradable poly(lactic-co-glycolic acid) nanoparticles. ADN was conjugated on the surface of nanoparticles using EDC-NHS chemistry. The particles were characterized in vitro for physicochemical properties, cellular uptake, and biocompatibility. The size and zeta potential of DTX nanoparticles (DPLGA) were found to be 138.4 ± 5.45 nm and −16.7 ± 2.3 mV which were found to change after ADN conjugation. The size was increased to 158.2 ± 6.3 nm, whereas zeta potential was decreased to −11.7 ± 1.4 mV for ADN-conjugated DTX nanoparticles (ADN-DPLGA) indicative of surface conjugation. As observed from transmission electron microscopy (TEM), the nanoparticles were spherical and showed no significant change in encapsulation efficiency even after surface conjugation. Careful and systematic optimization leads to ADN-conjugated PLGA nanoparticles having distinctive characteristic features such as particle size, surface potential, encapsulation efficacy, etc., that may play crucial roles in the fate of nanoparticles (NPs). Consequently, higher cellular uptake in the A549 lung cancer cell line was exhibited by ADN-DPLGA compared to DPLGA, illustrating the role of ADN receptors (ARs) in facilitating the uptake of NPs. Further in vivo pharmacokinetics and tissue distribution experiments revealed prolonged circulation in plasma and significantly higher lung tissue distribution than in other organs, dictating the targeting potential of the developed formulation over naïve drug and unconjugated formulations. Further, in vivo acute toxicity was examined using multiple parameters for non-toxic attributes of the developed formulation compared to other non-targeted organs. Further, it also supports the selection of biocompatible polymers in the formulation. The current study presents a proof-of-concept for a multipronged formulation technology strategy that might be used to maximize anticancer therapeutic responses in the lungs in the treatment of NSCLC. An improved therapeutic and safety profile would help achieve maximum efficacy at a reduced dose that would eventually help reduce the toxicity.
- 28 April 2022
- Published by MDPI AG in Pharmaceuticals
- Vol. 15 (5) , 544
Open AccessAdenosine Conjugated Docetaxel Nanoparticles—Proof of Concept Studies for Non-Small Cell Lung Cancer
Non-small cell lung cancer, a molecularly diverse disease, is the most prevalent cause of cancer mortality globally. Increasing understanding of the clinicopathology of the disease and mechanisms of tumor progression has facilitated early detection and multimodal care. Despite the advancements, survival rates are extremely low due to non-targeted therapeutics and correspondingly increased risk of metastasis. At some phases of cancer, patients need to face the ghost of chemotherapy. It is a difficult decision near the end of life. Such treatments have the capability to prolong survival or reduce symptoms, but can cause serious adverse effects, affecting quality of life of the patient. It is evident that many patients do not die from burden of the disease alone, but they die due to the toxic effect of treatment. Thus, increasing the efficacy is one aspect and decreasing the toxicity is another critical aspect of cancer formulation design. Through our current research, we tried to uncover both mentioned potentials of the formulation. Therefore, we designed actively targeted nanoparticles for improved therapeutics considering the overexpression of adenosine (ADN) receptors on non-small cell lung cancer (NSCLC) cells. Docetaxel (DTX), an essential therapeutic as part of combination therapy or as monotherapy for the treatment of NSCLC, was encapsulated in biodegradable poly(lactic-co-glycolic acid) nanoparticles. ADN was conjugated on the surface of nanoparticles using EDC-NHS chemistry. The particles were characterized in vitro for physicochemical properties, cellular uptake, and biocompatibility. The size and zeta potential of DTX nanoparticles (DPLGA) were found to be 138.4 ± 5.45 nm and −16.7 ± 2.3 mV which were found to change after ADN conjugation. The size was increased to 158.2 ± 6.3 nm, whereas zeta potential was decreased to −11.7 ± 1.4 mV for ADN-conjugated DTX nanoparticles (ADN-DPLGA) indicative of surface conjugation. As observed from transmission electron microscopy (TEM), the nanoparticles were spherical and showed no significant change in encapsulation efficiency even after surface conjugation. Careful and systematic optimization leads to ADN-conjugated PLGA nanoparticles having distinctive characteristic features such as particle size, surface potential, encapsulation efficacy, etc., that may play crucial roles in the fate of nanoparticles (NPs). Consequently, higher cellular uptake in the A549 lung cancer cell line was exhibited by ADN-DPLGA compared to DPLGA, illustrating the role of ADN receptors (ARs) in facilitating the uptake of NPs. Further in vivo pharmacokinetics and tissue distribution experiments revealed prolonged circulation in plasma and significantly higher lung tissue distribution than in other organs, dictating the targeting potential of the developed formulation over naïve drug and unconjugated formulations. Further, in vivo acute toxicity was examined using multiple parameters for non-toxic attributes of the developed formulation compared to other non-targeted organs. Further, it also supports the selection of biocompatible polymers in the formulation. The current study presents a proof-of-concept for a multipronged formulation technology strategy that might be used to maximize anticancer therapeutic responses in the lungs in the treatment of NSCLC. An improved therapeutic and safety profile would help achieve maximum efficacy at a reduced dose that would eventually help reduce the toxicity.
- Open Access
- 4 February 2022
- Published by MDPI AG in Pharmaceutics
- Vol. 14 (2) , 358
Fast-Dissolving Nifedipine and Atorvastatin Calcium Electrospun Nanofibers as a Potential Buccal Delivery System
Geriatric patients are more likely to suffer from multiple chronic diseases that require using several drugs, which are commonly ingested. However, to enhance geriatric patients’ convenience, the electrospun nanofiber system was previously proven to be a successful alternative for the existing oral dosage forms, i.e., tablets and capsules. These nanofibers prepared either as single- or multi-layered fibers could hold at least one active compound in each layer. They might also be fabricated as ultra-disintegrated fibrous films for oral cavity administration, i.e., buccal or sublingual, to improve the bioavailability and intake of the administered drugs. Therefore, in this work, a combination of nifedipine and atorvastatin calcium, which are frequently prescribed for hypertension and hyperlipidemia patients, respectively, was prepared in a coaxial electrospinning system for buccal administration. Scanning electron microscopy image showed the successful preparation of smooth, non-beaded, and non-porous surfaces of the drug-loaded nanofibers with an average fiber diameter of 968 ± 198 nm. In contrast, transmission electron microscopy distinguished the inner and outer layers of those nanofibers. The disintegration of the drug-loaded nanofibers was ≤12 s, allowing the rapid release of nifedipine and atorvastatin calcium to 61% and 47%, respectively, after 10 min, while a complete drug release was achieved after 120 min. In vitro, a drug permeation study using Franz diffusion showed that the permeation of both drugs from the core–shell nanofibers was enhanced significantly (p < 0.05) compared to the drugs in a solution form. In conclusion, the development of drug-loaded nanofibers containing nifedipine and atorvastatin calcium can be a potential buccal delivery system.
- 4 February 2022
- Published by MDPI AG in Pharmaceutics
- Vol. 14 (2) , 358
Open AccessFast-Dissolving Nifedipine and Atorvastatin Calcium Electrospun Nanofibers as a Potential Buccal Delivery System
Geriatric patients are more likely to suffer from multiple chronic diseases that require using several drugs, which are commonly ingested. However, to enhance geriatric patients’ convenience, the electrospun nanofiber system was previously proven to be a successful alternative for the existing oral dosage forms, i.e., tablets and capsules. These nanofibers prepared either as single- or multi-layered fibers could hold at least one active compound in each layer. They might also be fabricated as ultra-disintegrated fibrous films for oral cavity administration, i.e., buccal or sublingual, to improve the bioavailability and intake of the administered drugs. Therefore, in this work, a combination of nifedipine and atorvastatin calcium, which are frequently prescribed for hypertension and hyperlipidemia patients, respectively, was prepared in a coaxial electrospinning system for buccal administration. Scanning electron microscopy image showed the successful preparation of smooth, non-beaded, and non-porous surfaces of the drug-loaded nanofibers with an average fiber diameter of 968 ± 198 nm. In contrast, transmission electron microscopy distinguished the inner and outer layers of those nanofibers. The disintegration of the drug-loaded nanofibers was ≤12 s, allowing the rapid release of nifedipine and atorvastatin calcium to 61% and 47%, respectively, after 10 min, while a complete drug release was achieved after 120 min. In vitro, a drug permeation study using Franz diffusion showed that the permeation of both drugs from the core–shell nanofibers was enhanced significantly (p < 0.05) compared to the drugs in a solution form. In conclusion, the development of drug-loaded nanofibers containing nifedipine and atorvastatin calcium can be a potential buccal delivery system.
- Top Cited PapersOpen Access
- 3 January 2022
- Published by MDPI AG in Pharmaceutics
- Vol. 14 (1) , 106
Development of Pharmaceutical Nanomedicines: From the Bench to the Market
Nanotechnology plays a significant role in the field of medicine and in drug delivery, mainly due to the major limitations affecting the conventional pharmaceutical agents, and older formulations and delivery systems. The effect of nanotechnology on healthcare is already being felt, as various nanotechnology applications have been developed, and several nanotechnology-based medicines are now on the market. Across many parts of the world, nanotechnology draws increasing investment from public authorities and the private sector. Most conventional drug-delivery systems (CDDSs) have an immediate, high drug release after administration, leading to increased administration frequency. Thus, many studies have been carried out worldwide focusing on the development of pharmaceutical nanomedicines for translation into products manufactured by local pharmaceutical companies. Pharmaceutical nanomedicine products are projected to play a major role in the global pharmaceutical market and healthcare system. Our objectives were to examine the nanomedicines approved by the Food and Drug Administration (FDA) and the European Medicines Agency (EMA) in the global market, to briefly cover the challenges faced during their development, and to look at future perspectives. Additionally, the importance of nanotechnology in developing pharmaceutical products, the ideal properties of nanocarriers, the reasons behind the failure of some nanomedicines, and the important considerations in the development of nanomedicines will be discussed in brief.
- 3 January 2022
- Published by MDPI AG in Pharmaceutics
- Vol. 14 (1) , 106
Top Cited PapersOpen AccessDevelopment of Pharmaceutical Nanomedicines: From the Bench to the Market
Nanotechnology plays a significant role in the field of medicine and in drug delivery, mainly due to the major limitations affecting the conventional pharmaceutical agents, and older formulations and delivery systems. The effect of nanotechnology on healthcare is already being felt, as various nanotechnology applications have been developed, and several nanotechnology-based medicines are now on the market. Across many parts of the world, nanotechnology draws increasing investment from public authorities and the private sector. Most conventional drug-delivery systems (CDDSs) have an immediate, high drug release after administration, leading to increased administration frequency. Thus, many studies have been carried out worldwide focusing on the development of pharmaceutical nanomedicines for translation into products manufactured by local pharmaceutical companies. Pharmaceutical nanomedicine products are projected to play a major role in the global pharmaceutical market and healthcare system. Our objectives were to examine the nanomedicines approved by the Food and Drug Administration (FDA) and the European Medicines Agency (EMA) in the global market, to briefly cover the challenges faced during their development, and to look at future perspectives. Additionally, the importance of nanotechnology in developing pharmaceutical products, the ideal properties of nanocarriers, the reasons behind the failure of some nanomedicines, and the important considerations in the development of nanomedicines will be discussed in brief.
- RetractedOpen Access
- 24 September 2021
- Published by MDPI AG in Pharmaceutics
- Vol. 13 (10) , 1554
RETRACTED: Gum Acacia Functionalized Colloidal Gold Nanoparticles of Letrozole as Biocompatible Drug Delivery Carrier for Treatment of Breast Cancer
The most prevalent malignancy among postmenopausal women is breast cancer. It is one of the leading causes of cancer-related mortality among women. Letrozole (LTZ) is a clinically approved inhibitor for breast cancer in postmenopausal women. However, due to poor aqueous solubility, non-specific binding, unwanted toxicity, and poor blood circulation hampered its clinical applications. To maximize the pharmacological effects and minimize the side effects, inorganic nanoparticles are a good alternative. Due to excellent biocompatibility and minimum cytotoxicity, gold nanoparticles (AuNPs) offer distinct benefits over other metal nanoparticles. Emerging as attractive components, AuNPs and Gum acacia (GA) have been extensively studied as biologically safe nanomaterials for the treatment of cancers. This study reports the synthesis and characterization of GA stabilized gold nanoparticles (GA-AuNPs) of LTZ for breast cancer treatment. The observed particle size of optimized LTZ @ GA-AuNPs was 81.81 ± 4.24 nm in size, 0.286 ± 0.143 of polydispersity index (PDI) and −14.6 ± −0.73 mV zeta potential. The biologically synthesized LTZ @ GA-AuNPs also demonstrated dose-dependent cytotoxicity against the human breast cancer cell line MCF-7, with an inhibitory concentration (IC50) of 3.217 ± 0.247. We determined the hemolytic properties of the LTZ @ GA-AuNPs to evaluate the interaction between the nanoparticles and blood components. Results showed that there is no interaction between LTZ @ GA-AuNPs and blood. In conclusion, the findings indicate that LTZ @ GA-AuNPs has significant potential as a promising drug delivery carrier for treating breast cancer in postmenopausal women.
- 24 September 2021
- Published by MDPI AG in Pharmaceutics
- Vol. 13 (10) , 1554
RetractedOpen AccessRETRACTED: Gum Acacia Functionalized Colloidal Gold Nanoparticles of Letrozole as Biocompatible Drug Delivery Carrier for Treatment of Breast Cancer
The most prevalent malignancy among postmenopausal women is breast cancer. It is one of the leading causes of cancer-related mortality among women. Letrozole (LTZ) is a clinically approved inhibitor for breast cancer in postmenopausal women. However, due to poor aqueous solubility, non-specific binding, unwanted toxicity, and poor blood circulation hampered its clinical applications. To maximize the pharmacological effects and minimize the side effects, inorganic nanoparticles are a good alternative. Due to excellent biocompatibility and minimum cytotoxicity, gold nanoparticles (AuNPs) offer distinct benefits over other metal nanoparticles. Emerging as attractive components, AuNPs and Gum acacia (GA) have been extensively studied as biologically safe nanomaterials for the treatment of cancers. This study reports the synthesis and characterization of GA stabilized gold nanoparticles (GA-AuNPs) of LTZ for breast cancer treatment. The observed particle size of optimized LTZ @ GA-AuNPs was 81.81 ± 4.24 nm in size, 0.286 ± 0.143 of polydispersity index (PDI) and −14.6 ± −0.73 mV zeta potential. The biologically synthesized LTZ @ GA-AuNPs also demonstrated dose-dependent cytotoxicity against the human breast cancer cell line MCF-7, with an inhibitory concentration (IC50) of 3.217 ± 0.247. We determined the hemolytic properties of the LTZ @ GA-AuNPs to evaluate the interaction between the nanoparticles and blood components. Results showed that there is no interaction between LTZ @ GA-AuNPs and blood. In conclusion, the findings indicate that LTZ @ GA-AuNPs has significant potential as a promising drug delivery carrier for treating breast cancer in postmenopausal women.