Abdulwahab Salah
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abdulwahab Salah has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Fahim Abdo Ali Qaraah
Interdisciplinary Research Center for Hydrogen Technologies and Carbon Management King Fahd University of Petroleum & Minerals (KFUPM) Dhahran 31261 Saudi Arabia
5 shared publications - Adel Al-Salihy
MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, China
4 shared publications - Samah A. Mahyoub
Interdisciplinary Research Center for Hydrogen Technologies and Carbon Management King Fahd University of Petroleum & Minerals (KFUPM) Dhahran 31261 Saudi Arabia
4 shared publications Nabilah Al-Ansi
3 shared publications- Qasem Ahmed Drmosh
Interdisciplinary Research Center for Hydrogen Technologies and Carbon Management King Fahd University of Petroleum & Minerals (KFUPM) Dhahran 31261 Saudi Arabia
3 shared publications - Ahmed Bahgat Radwan
Center for Advanced Materials, Qatar University
2 shared publications
Latest Publications
- 29 November 2025
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (12)
Synergistic Role of Dual Metal (V) and Non‐Metal (N) Doping with Carbon Sensitization in 3D Hierarchical Nb 2 O 5 for Highly Selective Visible‐Light‐Driven CO 2 ‐to‐CH 4 Photoreduction
Photocatalytic CO 2 conversion into energy‐rich fuels offers a sustainable route to address global energy and environmental challenges. However, achieving high activity and selectivity under visible light remains a key limitation. In this study, a 3D hierarchical Nb 2 O 5 nanoflower photocatalyst dual‐doped with vanadium (V), nitrogen (N), and sensitized with carbon (designated NVNBOC) is synthesized via a two‐step hydrothermal process followed by calcination. The incorporation of dual metal and non‐metal dopants, in combination with carbon sensitization, yielded a strong synergistic effect, significantly enhancing both photocatalytic performance and selectivity. Under visible‐light irradiation, the NVNBOC catalyst achieved a remarkable methane (CH 4 ) production rate of 78.32 µmol·g −1 ·h −1 , approximately 12 times higher than that of pristine Nb 2 O 5 , with an outstanding CH 4 selectivity of 97.10%. In‐situ DRIFTS results revealed that the NVNBOC photocatalyst facilitates a stepwise CO 2 reduction pathway, involving key intermediates such as *HCOO − , *CHO, and *CH 3 O, ultimately leading to full CH 4 generation. These findings demonstrate the pivotal role of dual dopant engineering in enhancing light utilization, charge separation, and intermediate stabilization, providing a promising approach for advancing visible‐light‐driven photocatalytic CO 2 reduction toward practical clean energy applications.
- 29 November 2025
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (12)
Synergistic Role of Dual Metal (V) and Non‐Metal (N) Doping with Carbon Sensitization in 3D Hierarchical Nb 2 O 5 for Highly Selective Visible‐Light‐Driven CO 2 ‐to‐CH 4 Photoreduction
Photocatalytic CO 2 conversion into energy‐rich fuels offers a sustainable route to address global energy and environmental challenges. However, achieving high activity and selectivity under visible light remains a key limitation. In this study, a 3D hierarchical Nb 2 O 5 nanoflower photocatalyst dual‐doped with vanadium (V), nitrogen (N), and sensitized with carbon (designated NVNBOC) is synthesized via a two‐step hydrothermal process followed by calcination. The incorporation of dual metal and non‐metal dopants, in combination with carbon sensitization, yielded a strong synergistic effect, significantly enhancing both photocatalytic performance and selectivity. Under visible‐light irradiation, the NVNBOC catalyst achieved a remarkable methane (CH 4 ) production rate of 78.32 µmol·g −1 ·h −1 , approximately 12 times higher than that of pristine Nb 2 O 5 , with an outstanding CH 4 selectivity of 97.10%. In‐situ DRIFTS results revealed that the NVNBOC photocatalyst facilitates a stepwise CO 2 reduction pathway, involving key intermediates such as *HCOO − , *CHO, and *CH 3 O, ultimately leading to full CH 4 generation. These findings demonstrate the pivotal role of dual dopant engineering in enhancing light utilization, charge separation, and intermediate stabilization, providing a promising approach for advancing visible‐light‐driven photocatalytic CO 2 reduction toward practical clean energy applications.
- 4 October 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 660
Fabrication of dual-phase MoO3-MoO2@N-doped carbon nanopetal spheres to achieve quick ion transport for Li/Na storage
- 4 October 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 660
Fabrication of dual-phase MoO3-MoO2@N-doped carbon nanopetal spheres to achieve quick ion transport for Li/Na storage
- 18 September 2025
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (12)
Recent Breakthroughs in CO 2 Electroreduction for Efficient Ethanol Production: A Review
The electrochemical conversion of carbon dioxide (CO 2 ) into ethanol (C 2 H 5 OH) presents a promising pathway for reducing greenhouse gas emissions while offering a renewable alternative to conventional fossil fuels and materials. The efficiency of this process is heavily influenced by the performance of electrocatalysts, electrolyzers, and electrolyte compositions. However, significant barriers remain, including low conversion efficiency, limited stability, high costs, restricted mass transport, and poor selectivity. Despite notable progress in CO 2 electroreduction to C 2 H 5 OH, further advancements are required to establish it as an economically viable and scalable technology for sustainable energy production. This review provides a comprehensive overview of recent innovations in the field, focusing on the development of advanced electrocatalysts, optimized electrolyte systems, and improved electrolyzer designs. By analyzing these key factors, this work aims to offer valuable insights into the current progress and challenges associated with CO 2 ‐to‐C 2 H 5 OH electroreduction, highlighting the essential steps needed for its practical implementation.
- 18 September 2025
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (12)
Recent Breakthroughs in CO 2 Electroreduction for Efficient Ethanol Production: A Review
The electrochemical conversion of carbon dioxide (CO 2 ) into ethanol (C 2 H 5 OH) presents a promising pathway for reducing greenhouse gas emissions while offering a renewable alternative to conventional fossil fuels and materials. The efficiency of this process is heavily influenced by the performance of electrocatalysts, electrolyzers, and electrolyte compositions. However, significant barriers remain, including low conversion efficiency, limited stability, high costs, restricted mass transport, and poor selectivity. Despite notable progress in CO 2 electroreduction to C 2 H 5 OH, further advancements are required to establish it as an economically viable and scalable technology for sustainable energy production. This review provides a comprehensive overview of recent innovations in the field, focusing on the development of advanced electrocatalysts, optimized electrolyte systems, and improved electrolyzer designs. By analyzing these key factors, this work aims to offer valuable insights into the current progress and challenges associated with CO 2 ‐to‐C 2 H 5 OH electroreduction, highlighting the essential steps needed for its practical implementation.
- 29 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (19) , 28199-28210
Synergistic Effect of NiMoO4 Nanorods with Polyaniline for Efficient Electrochemical Water Splitting
Electrochemical water splitting has emerged as a promising solution for sustainable hydrogen production, but the development of efficient, durable, and cost-effective bifunctional electrocatalysts remains a critical challenge. In this work, we report the novel fabrication of composite materials consisting of nickel molybdate (NiMoO4) coated with polyaniline (PANI). NiMoO4 nanorods were initially synthesized on nickel foam (NF) using a hydrothermal technique and subsequently coated with PANI via UV-assisted polymerization. The resulting NiMoO4@PANI nanostructures demonstrate increased active sites for improved efficiency in electron transfer and catalytic activity. This combination enhanced hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance, achieving reduced overpotential values of 88 and 167 mV for HER and OER at 10 mA cm-2, respectively. Comprehensive electrochemical evaluations, including Tafel slope, electrochemical impedance spectroscopy (EIS), and electrochemical double-layer capacitance (Cdl) measurements, validate the enhancements in kinetics and charge transfer facilitated by the PANI coating. Density functional theory (DFT) calculations offer further insights into the improved catalytic efficiency, showing reduced barrier for water splitting (ΔGb = 0.45 eV), nearly negligible hydrogen adsorption energy (ΔG*H = 0.08 eV), appropriate adsorption energy of oxygen evolution (ΔG*OOH - ΔG*OH = 2.58 eV), and high density of states close to the Fermi level. The NiMoO4@PANI nanostructures exhibit excellent stability for 310 h without interruption, suggesting the potential for sustainable hydrogen production.
- 29 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (19) , 28199-28210
Synergistic Effect of NiMoO4 Nanorods with Polyaniline for Efficient Electrochemical Water Splitting
Electrochemical water splitting has emerged as a promising solution for sustainable hydrogen production, but the development of efficient, durable, and cost-effective bifunctional electrocatalysts remains a critical challenge. In this work, we report the novel fabrication of composite materials consisting of nickel molybdate (NiMoO4) coated with polyaniline (PANI). NiMoO4 nanorods were initially synthesized on nickel foam (NF) using a hydrothermal technique and subsequently coated with PANI via UV-assisted polymerization. The resulting NiMoO4@PANI nanostructures demonstrate increased active sites for improved efficiency in electron transfer and catalytic activity. This combination enhanced hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance, achieving reduced overpotential values of 88 and 167 mV for HER and OER at 10 mA cm-2, respectively. Comprehensive electrochemical evaluations, including Tafel slope, electrochemical impedance spectroscopy (EIS), and electrochemical double-layer capacitance (Cdl) measurements, validate the enhancements in kinetics and charge transfer facilitated by the PANI coating. Density functional theory (DFT) calculations offer further insights into the improved catalytic efficiency, showing reduced barrier for water splitting (ΔGb = 0.45 eV), nearly negligible hydrogen adsorption energy (ΔG*H = 0.08 eV), appropriate adsorption energy of oxygen evolution (ΔG*OOH - ΔG*OH = 2.58 eV), and high density of states close to the Fermi level. The NiMoO4@PANI nanostructures exhibit excellent stability for 310 h without interruption, suggesting the potential for sustainable hydrogen production.
- 14 April 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (15)
Boosting Visible‐Light Hydrogen Evolution Through Synergistic Dual‐Heteroatom Doping and 3D Hierarchical Porous g‐C₃N₄ Nanocorals
Addressing global energy and environmental challenges requires innovative advancements in sustainable technologies. Photocatalytic hydrogen evolution (PHE) is a promising approach for clean energy production through the efficient conversion of solar energy into hydrogen. Despite ongoing challenges, improving the structural design and photo/electrochemical properties of graphitic carbon nitride (g‐C₃N₄) remains essential for boosting the efficiency of PHE, contributing to solutions for the energy crisis and environmental pollution. Herein, we present a novel 3D hierarchical porous g‐C₃N₄ nanocoral structure doped with sulfur and oxygen (3D SO‐CN1), synthesized via a simple hydrothermal approach followed by calcination. The unique nanocoral architecture significantly increases the surface area, providing abundant active sites while promoting efficient light absorption and charge carrier separation compared with pristine g‐C 3 N 4 . As a result, the 3D SO‐CN1 catalyst loaded with 3 wt% Pt exhibits an impressive hydrogen evolution rate of 27.38 mmol⋅g⁻¹⋅h⁻¹ under visible‐light irradiation, using 15 vol% triethanolamine (TEOA) as a sacrificial agent. Notably, the proposed 3D SO‐CN1 catalyst exhibits 51‐fold enhancement compared to pristine g‐C₃N₄. Additionally, it exhibits a notable apparent quantum efficiency (AQE) of 5.26% at 420 nm, highlighting its superior photocatalytic performance. This study underscores the synergy of dual heteroatom doping and morphological engineering in optimizing g‐C₃N₄ for next‐generation sustainable hydrogen production.
- 14 April 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (15)
Boosting Visible‐Light Hydrogen Evolution Through Synergistic Dual‐Heteroatom Doping and 3D Hierarchical Porous g‐C₃N₄ Nanocorals
Addressing global energy and environmental challenges requires innovative advancements in sustainable technologies. Photocatalytic hydrogen evolution (PHE) is a promising approach for clean energy production through the efficient conversion of solar energy into hydrogen. Despite ongoing challenges, improving the structural design and photo/electrochemical properties of graphitic carbon nitride (g‐C₃N₄) remains essential for boosting the efficiency of PHE, contributing to solutions for the energy crisis and environmental pollution. Herein, we present a novel 3D hierarchical porous g‐C₃N₄ nanocoral structure doped with sulfur and oxygen (3D SO‐CN1), synthesized via a simple hydrothermal approach followed by calcination. The unique nanocoral architecture significantly increases the surface area, providing abundant active sites while promoting efficient light absorption and charge carrier separation compared with pristine g‐C 3 N 4 . As a result, the 3D SO‐CN1 catalyst loaded with 3 wt% Pt exhibits an impressive hydrogen evolution rate of 27.38 mmol⋅g⁻¹⋅h⁻¹ under visible‐light irradiation, using 15 vol% triethanolamine (TEOA) as a sacrificial agent. Notably, the proposed 3D SO‐CN1 catalyst exhibits 51‐fold enhancement compared to pristine g‐C₃N₄. Additionally, it exhibits a notable apparent quantum efficiency (AQE) of 5.26% at 420 nm, highlighting its superior photocatalytic performance. This study underscores the synergy of dual heteroatom doping and morphological engineering in optimizing g‐C₃N₄ for next‐generation sustainable hydrogen production.
- 21 March 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 119, 82-94
Optimizing surface structure with Cu nanodots-decorated NiMoO4 nanostructures to enhance electrocatalytic water splitting
- 21 March 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 119, 82-94
Optimizing surface structure with Cu nanodots-decorated NiMoO4 nanostructures to enhance electrocatalytic water splitting
- 17 November 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (6) , e202401862
RuCo@C Hollow Nanoprisms Derived from ZIF‐67 for Enhanced Hydrogen and Oxygen Evolution Reactions
Zeolitic imidazolate frameworks (ZIFs) are commonly used to create complex hollow structures for energy applications. This study presents a simple method to produce a novel hollow nanoprism Co@C hierarchical composite from ZIF‐67 through high‐temperature treatment at 800 °C. This composite serves as a platform for Ru nanoparticle deposition, forming RuCo@C hollow nanoprism (RuCo@C HNP). As an electrocatalyst in 1 M KOH, RuCo@C HNP exhibits excellent hydrogen evolution reaction (HER) performance, with a low overpotential of 32 mV to reach 10 mA cm−2, a Tafel slope of 39.67 mV dec−1, a high turnover frequency (TOF) of 3.83 s−1 at η200, and stable performance over 50 h. It also achieves a low η10 of 266 mV for the oxygen evolution reaction (OER) with a Tafel slope of 45.22 mV dec−1. Density functional theory (DFT) calculations reveal that Ru doping in Ni/Co maintains a low water dissociation barrier, reduces the energy barrier for the OER rate‐determining step, and creates active sites for H*, enhancing adsorption/desorption abilities. These results are attributed to the synergy between Co and Ru and the hollow prism structure′s increased surface area. This method for synthesizing hollow structures using ZIF composites shows promise for applications in the energy sector.
- 17 November 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (6) , e202401862
RuCo@C Hollow Nanoprisms Derived from ZIF‐67 for Enhanced Hydrogen and Oxygen Evolution Reactions
Zeolitic imidazolate frameworks (ZIFs) are commonly used to create complex hollow structures for energy applications. This study presents a simple method to produce a novel hollow nanoprism Co@C hierarchical composite from ZIF‐67 through high‐temperature treatment at 800 °C. This composite serves as a platform for Ru nanoparticle deposition, forming RuCo@C hollow nanoprism (RuCo@C HNP). As an electrocatalyst in 1 M KOH, RuCo@C HNP exhibits excellent hydrogen evolution reaction (HER) performance, with a low overpotential of 32 mV to reach 10 mA cm−2, a Tafel slope of 39.67 mV dec−1, a high turnover frequency (TOF) of 3.83 s−1 at η200, and stable performance over 50 h. It also achieves a low η10 of 266 mV for the oxygen evolution reaction (OER) with a Tafel slope of 45.22 mV dec−1. Density functional theory (DFT) calculations reveal that Ru doping in Ni/Co maintains a low water dissociation barrier, reduces the energy barrier for the OER rate‐determining step, and creates active sites for H*, enhancing adsorption/desorption abilities. These results are attributed to the synergy between Co and Ru and the hollow prism structure′s increased surface area. This method for synthesizing hollow structures using ZIF composites shows promise for applications in the energy sector.
- 23 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (44) , 60310-60320
Interface Engineering Induced by Low Ru Doping in Ni/Co@NC Derived from Ni-ZIF-67 for Enhanced Electrocatalytic Overall Water Splitting
Electrochemical water splitting is a promising approach for hydrogen evolution reactions (HER); however, the oxygen evolution reaction (OER) remains a major bottleneck due to its high energy requirements. High-performance electrocatalysts capable of facilitating HER, OER, and overall water splitting (OWS) are highly needed to improve OER kinetics. In this work, we synthesized a trimetallic heterostructure of Ru, Ni, and Co incorporated into N-doped carbon (denoted as Ru/Ni/Co@NC) by first synthesizing Ni/Co@NC from Ni-ZIF-67 polyhedrons via high-temperature carbonization, followed by Ru doping using the galvanic replacement method. Benefiting from increased active surface sites, modulated electronic structure, and enhanced interfacial synergistic effects, Ru/Ni/Co@NC exhibited exceptional electrocatalytic performance for both HER and OER processes. The optimized Ru/Ni/Co@NC catalyst, with a minimal Ru mass ratio of ∼2.07%, demonstrated significantly low overpotential values of 34 mV for HER and 174 mV for OER at a current density of 10 mA/cm2 with corresponding Tafel slope values of 33.42 and 34.39 mV/dec, respectively. Further, the optimized catalyst was loaded onto carbon paper and used as anode and cathode materials for alkaline water splitting. Interestingly, a low cell voltage of just 1.44 V was obtained. The enhanced electrolytic performance was further elaborated by density functional theory (DFT) calculations, which confirmed that Ru doping in Ni/Co introduced additional active sites for H*, enhancing adsorption/desorption abilities for HER (ΔGH* = -0.30 eV), lowering water dissociation barrier (ΔGb = 0.49 eV) and reducing the energy barrier for the rate-determining step of OER (O* → OOH*) to 1.62 eV in an alkaline environment. These findings reflect the significant potential of ZIF-67-based catalysts in energy conversion and storage applications.
- 23 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (44) , 60310-60320
Interface Engineering Induced by Low Ru Doping in Ni/Co@NC Derived from Ni-ZIF-67 for Enhanced Electrocatalytic Overall Water Splitting
Electrochemical water splitting is a promising approach for hydrogen evolution reactions (HER); however, the oxygen evolution reaction (OER) remains a major bottleneck due to its high energy requirements. High-performance electrocatalysts capable of facilitating HER, OER, and overall water splitting (OWS) are highly needed to improve OER kinetics. In this work, we synthesized a trimetallic heterostructure of Ru, Ni, and Co incorporated into N-doped carbon (denoted as Ru/Ni/Co@NC) by first synthesizing Ni/Co@NC from Ni-ZIF-67 polyhedrons via high-temperature carbonization, followed by Ru doping using the galvanic replacement method. Benefiting from increased active surface sites, modulated electronic structure, and enhanced interfacial synergistic effects, Ru/Ni/Co@NC exhibited exceptional electrocatalytic performance for both HER and OER processes. The optimized Ru/Ni/Co@NC catalyst, with a minimal Ru mass ratio of ∼2.07%, demonstrated significantly low overpotential values of 34 mV for HER and 174 mV for OER at a current density of 10 mA/cm2 with corresponding Tafel slope values of 33.42 and 34.39 mV/dec, respectively. Further, the optimized catalyst was loaded onto carbon paper and used as anode and cathode materials for alkaline water splitting. Interestingly, a low cell voltage of just 1.44 V was obtained. The enhanced electrolytic performance was further elaborated by density functional theory (DFT) calculations, which confirmed that Ru doping in Ni/Co introduced additional active sites for H*, enhancing adsorption/desorption abilities for HER (ΔGH* = -0.30 eV), lowering water dissociation barrier (ΔGb = 0.49 eV) and reducing the energy barrier for the rate-determining step of OER (O* → OOH*) to 1.62 eV in an alkaline environment. These findings reflect the significant potential of ZIF-67-based catalysts in energy conversion and storage applications.
- 16 April 2022
- Published by Wiley in Advanced Energy Materials
- Vol. 12 (21)
Advanced Ru/Ni/WC@NPC Multi‐Interfacial Electrocatalyst for Efficient Sustainable Hydrogen and Chlor‐Alkali Co‐Production
Rational design and construction of a new high‐efficiency hydrogen evolution electrocatalyst operating stably under high temperature, strong alkaline, and high salt conditions are the key challenges for realizing economically sustainable hydrogen generation and low energy consumption chlor‐alkali co‐production. Herein, according to requirements of hydrogen evolution reaction (HER) electrocatalysts under chlor‐alkali electrolysis conditions, a three‐component Ru/Ni/WC electrocatalyst with a weak exothermic effect for the water adsorption step (∆HH2O = −0.12 eV), low water dissociation energy barrier (ΔGb = 0.61 eV), and close‐to‐zero Gibbs free adsorption energy (∆GH* = −0.03 eV) is designed through density functional theory calculations. Under the guidance of theoretical calculations, a novel multi‐interface composite electrocatalyst is successfully prepared, denoted as Ru/Ni/WC@NPC (Ru wt.% = 4.13%). In a strongly alkaline medium, Ru/Ni/WC@NPC (Ru wt.% = 4.13%) records an excellent HER electrocatalytic activity with a very low overpotential (η10 = −3 mV) at 20 °C and even demonstrates exciting HER behavior at 90 °C (η10 = +2.8 mV). Most importantly, the electrochemical test under simulated chlor‐alkali electrolysis condition demonstrates better HER performance than the industrial cathode material of commercial 20% Pt/C and low carbon steel. Generally, this study reveals a new strategy and reference for constructing effective and robust HER electrocatalysts that match with the chlor‐alkali industry.
- 16 April 2022
- Published by Wiley in Advanced Energy Materials
- Vol. 12 (21)
Advanced Ru/Ni/WC@NPC Multi‐Interfacial Electrocatalyst for Efficient Sustainable Hydrogen and Chlor‐Alkali Co‐Production
Rational design and construction of a new high‐efficiency hydrogen evolution electrocatalyst operating stably under high temperature, strong alkaline, and high salt conditions are the key challenges for realizing economically sustainable hydrogen generation and low energy consumption chlor‐alkali co‐production. Herein, according to requirements of hydrogen evolution reaction (HER) electrocatalysts under chlor‐alkali electrolysis conditions, a three‐component Ru/Ni/WC electrocatalyst with a weak exothermic effect for the water adsorption step (∆HH2O = −0.12 eV), low water dissociation energy barrier (ΔGb = 0.61 eV), and close‐to‐zero Gibbs free adsorption energy (∆GH* = −0.03 eV) is designed through density functional theory calculations. Under the guidance of theoretical calculations, a novel multi‐interface composite electrocatalyst is successfully prepared, denoted as Ru/Ni/WC@NPC (Ru wt.% = 4.13%). In a strongly alkaline medium, Ru/Ni/WC@NPC (Ru wt.% = 4.13%) records an excellent HER electrocatalytic activity with a very low overpotential (η10 = −3 mV) at 20 °C and even demonstrates exciting HER behavior at 90 °C (η10 = +2.8 mV). Most importantly, the electrochemical test under simulated chlor‐alkali electrolysis condition demonstrates better HER performance than the industrial cathode material of commercial 20% Pt/C and low carbon steel. Generally, this study reveals a new strategy and reference for constructing effective and robust HER electrocatalysts that match with the chlor‐alkali industry.