Sergii Levkivskyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sergii Levkivskyi has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
National Transport University
3 shared publications- Alexander Marchuk2 shared publications
- Elena Gavrilenko2 shared publications
- Liydmyla Levkivska
National Transport University
2 shared publications National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
2 shared publications- Valentyn Moroz2 shared publications
Latest Publications
- Open Access
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (1 (131)) , 99-109
Identifying features of the stressed-strained state of a non-rigid roadbed along ascents and descents on highways
The object of this study is the asphalt-concrete layers of non-rigid roadbed on ascents and descents of highways before bridges. Asphalt-concrete layers of highways on approaches to bridges are one of the most important elements for providing the strength and durability of the entire structure of non-rigid roadbed. On the ascents and descents of approaches to bridges, where the speed of vehicles changes most often, the roadbed is exposed to more intense damage than in other areas. Practical experience shows that one of the most common root causes of the types of destruction of asphalt-concrete layers is disruption of their integrity in the form of cracks, which creates dangerous situations for road users due to premature and more intensive destruction of all road surfaces. This paper investigates features of the stressed-strained state of asphalt-concrete layers of roadbed on ascents and descents in the areas connecting bridges and overpasses with the embankment. A spatial finite-element model has been considered, which makes it possible to describe the stressed-strained state of each element in the road surface structure induced by the effect of traffic load on it. Quantitative and qualitative analysis of deformations, displacements, and stresses in asphalt-concrete layers of the structure of roadbed was carried out. Circumstances that can affect the premature formation of cracks and lead to a decrease in the durability of roadbed structures have been identified. This study makes it possible to identify and eliminate potential dangers that arise during the operation of roadbed. The results could be implemented in the design of roadbed in areas with difficult traffic in the area of ascent and descent, in particular before the bridge. Knowledge of features of the stressed-strained state of roadbed would contribute to the preservation of road infrastructure, could make it possible to improve the comfort and convenience when moving goods and passengers
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (1 (131)) , 99-109
Open AccessIdentifying features of the stressed-strained state of a non-rigid roadbed along ascents and descents on highways
The object of this study is the asphalt-concrete layers of non-rigid roadbed on ascents and descents of highways before bridges. Asphalt-concrete layers of highways on approaches to bridges are one of the most important elements for providing the strength and durability of the entire structure of non-rigid roadbed. On the ascents and descents of approaches to bridges, where the speed of vehicles changes most often, the roadbed is exposed to more intense damage than in other areas. Practical experience shows that one of the most common root causes of the types of destruction of asphalt-concrete layers is disruption of their integrity in the form of cracks, which creates dangerous situations for road users due to premature and more intensive destruction of all road surfaces. This paper investigates features of the stressed-strained state of asphalt-concrete layers of roadbed on ascents and descents in the areas connecting bridges and overpasses with the embankment. A spatial finite-element model has been considered, which makes it possible to describe the stressed-strained state of each element in the road surface structure induced by the effect of traffic load on it. Quantitative and qualitative analysis of deformations, displacements, and stresses in asphalt-concrete layers of the structure of roadbed was carried out. Circumstances that can affect the premature formation of cracks and lead to a decrease in the durability of roadbed structures have been identified. This study makes it possible to identify and eliminate potential dangers that arise during the operation of roadbed. The results could be implemented in the design of roadbed in areas with difficult traffic in the area of ascent and descent, in particular before the bridge. Knowledge of features of the stressed-strained state of roadbed would contribute to the preservation of road infrastructure, could make it possible to improve the comfort and convenience when moving goods and passengers
- 1 January 2024
- Published by National Transport University in Automobile Roads and Road Construction
- No. 116.2
INFLUENCE OF FUEL SUPPLY CORRECTION ON THE EXTERNAL SPEED CHARACTERISTIC OF A DIESEL ENGINE DRIVING POWER EQUIPMENT OF ROAD MACHINES UNDER OPERATING CONDITIONS
Summary. The paper considers the issue of improving fuel efficiency and reducing emissions of harmful substances from diesel exhaust gases, which is the source of energy for driving the working equipment of road machines operating in traction modes and during transport work under operating conditions, namely plough and plough-brush snow ploughs based on a pneumatic wheeled tractor. The object of research is to improve fuel efficiency and reduce emissions of harmful substances from the exhaust gases of the diesel engine driving the working equipment of road machines. The aim of the study is to improve fuel efficiency and reduce emissions of harmful substances from the exhaust gases of the 4Ч11.0/12.5 diesel engine (D-240, D-241, D-242, D-243 families), which is the source of energy for the drive of working equipment and the mechanism for moving plough and plough-brush snowplows by adjusting the all-mode fuel supply corrector, mechanical, centrifugal regulator of the high-pressure diesel fuel pump under operating conditions and the effect of this setting on the external speed characteristics of the diesel engine, namely maximum power Ne, maximum torque Mк; hourly fuel and air consumption Gпал and Gпов, specific effective fuel consumption ge; concentrations of harmful substances in exhaust gases: carbon monoxide CO, hydrocarbon compounds СmHn, nitrogen oxides NOx and smoke N of exhaust gases. The paper presents the results of experimental studies to determine the energy performance (maximum power Ne and maximum torque Mк) of a diesel engine (4Ч11.0/12.5 (D-242)) of power equipment; fuel efficiency indicators (hourly fuel consumption Gпал and specific effective fuel consumption ge); hourly air consumption Gпов; and concentrations of harmful substances in exhaust gases: carbon monoxide CO, hydrocarbon compounds СmНn, nitrogen oxides NOx and smoke N of exhaust gases. These were obtained at the position of the fuel injection control unit corresponding to the maximum fuel supply depending on the diesel crankshaft speed. The above indicators were determined with the changed settings of the fuel supply corrector of the all-mode, mechanical, centrifugal regulator of the high-pressure diesel fuel pump. Based on the obtained external speed characteristics of Ne, Mк, Gпал, ge, Gпов, CO, СmNn, NOx, and N, mathematical (polynomial) dependencies describing them on the diesel crankshaft rotation frequency were determined and their adequacy was checked. The conducted research allowed us to determine the main direction of improving fuel efficiency and reducing emissions of harmful substances from diesel exhaust gases in the conditions of road vehicles operation. Keywords: Fuel injection corrector, regulator, external speed characteristics, energy and environmental indicators, fuel efficiency, harmful substances, exhaust gases, operating conditions, polynomial models, adequacy.
- 1 January 2024
- Published by National Transport University in Automobile Roads and Road Construction
- No. 116.2
INFLUENCE OF FUEL SUPPLY CORRECTION ON THE EXTERNAL SPEED CHARACTERISTIC OF A DIESEL ENGINE DRIVING POWER EQUIPMENT OF ROAD MACHINES UNDER OPERATING CONDITIONS
Summary. The paper considers the issue of improving fuel efficiency and reducing emissions of harmful substances from diesel exhaust gases, which is the source of energy for driving the working equipment of road machines operating in traction modes and during transport work under operating conditions, namely plough and plough-brush snow ploughs based on a pneumatic wheeled tractor. The object of research is to improve fuel efficiency and reduce emissions of harmful substances from the exhaust gases of the diesel engine driving the working equipment of road machines. The aim of the study is to improve fuel efficiency and reduce emissions of harmful substances from the exhaust gases of the 4Ч11.0/12.5 diesel engine (D-240, D-241, D-242, D-243 families), which is the source of energy for the drive of working equipment and the mechanism for moving plough and plough-brush snowplows by adjusting the all-mode fuel supply corrector, mechanical, centrifugal regulator of the high-pressure diesel fuel pump under operating conditions and the effect of this setting on the external speed characteristics of the diesel engine, namely maximum power Ne, maximum torque Mк; hourly fuel and air consumption Gпал and Gпов, specific effective fuel consumption ge; concentrations of harmful substances in exhaust gases: carbon monoxide CO, hydrocarbon compounds СmHn, nitrogen oxides NOx and smoke N of exhaust gases. The paper presents the results of experimental studies to determine the energy performance (maximum power Ne and maximum torque Mк) of a diesel engine (4Ч11.0/12.5 (D-242)) of power equipment; fuel efficiency indicators (hourly fuel consumption Gпал and specific effective fuel consumption ge); hourly air consumption Gпов; and concentrations of harmful substances in exhaust gases: carbon monoxide CO, hydrocarbon compounds СmНn, nitrogen oxides NOx and smoke N of exhaust gases. These were obtained at the position of the fuel injection control unit corresponding to the maximum fuel supply depending on the diesel crankshaft speed. The above indicators were determined with the changed settings of the fuel supply corrector of the all-mode, mechanical, centrifugal regulator of the high-pressure diesel fuel pump. Based on the obtained external speed characteristics of Ne, Mк, Gпал, ge, Gпов, CO, СmNn, NOx, and N, mathematical (polynomial) dependencies describing them on the diesel crankshaft rotation frequency were determined and their adequacy was checked. The conducted research allowed us to determine the main direction of improving fuel efficiency and reducing emissions of harmful substances from diesel exhaust gases in the conditions of road vehicles operation. Keywords: Fuel injection corrector, regulator, external speed characteristics, energy and environmental indicators, fuel efficiency, harmful substances, exhaust gases, operating conditions, polynomial models, adequacy.
- Open Access
- 1 January 2024
- Published by Junior Academy of Sciences of Ukraine in Scientific Notes of Junior Academy of Sciences of Ukraine
- No. 1(29),p. 57-66
USE OF INFORMATION TECHNOLOGIES IN HIGHER SCHOOL
This article reveals the essence of three major information revolutions that took place in higher education. It is established that they have significantly changed the way in which we receive and perceive knowledge, and have also influenced the very essence and organization of the educational process. Each of these revolutionary changes improved the quality of education, preserved the best of the old methods, while at the same time giving way to new technologies. This contributed to improving the learning process and increasing the quality of education through the use of the latest information technologies. The importance and influence of information technologies in higher education at all levels are analyzed: from the pedagogical process to the management of the educational institution. They have been found to play an important role in all aspects of higher education, as they contribute to improving access to knowledge and resources via the Internet, provide interactive learning and individualization of the learning process, and assist in the management of the educational institution by providing effective communication and data analysis. These technologies stimulate the development of digital skills among students and prepare them for the demands of the modern labor market, making them an important tool for achieving high quality education. However, it was established that information technologies can have some negative impact on the quality of education in higher education. In particular, students may spend more time on social media and other entertainment aspects of the Internet, which affects their concentration and academic performance. The Internet may be a source of unverified or unreliable information, which may lead to incorrect understanding and use of the material. In addition, problems with access to the Internet, computer programs and other technical aspects may arise and interfere with the normal course of study. In connection with the deepening informatization of society, the main aspects of the application of information technologies in higher education are highlighted and investigated. The proposed measures are aimed at solving organizational and methodical problems of informatization of education in order to promote the further development of IT infrastructure in higher education.
- 1 January 2024
- Published by Junior Academy of Sciences of Ukraine in Scientific Notes of Junior Academy of Sciences of Ukraine
- No. 1(29),p. 57-66
Open AccessUSE OF INFORMATION TECHNOLOGIES IN HIGHER SCHOOL
This article reveals the essence of three major information revolutions that took place in higher education. It is established that they have significantly changed the way in which we receive and perceive knowledge, and have also influenced the very essence and organization of the educational process. Each of these revolutionary changes improved the quality of education, preserved the best of the old methods, while at the same time giving way to new technologies. This contributed to improving the learning process and increasing the quality of education through the use of the latest information technologies. The importance and influence of information technologies in higher education at all levels are analyzed: from the pedagogical process to the management of the educational institution. They have been found to play an important role in all aspects of higher education, as they contribute to improving access to knowledge and resources via the Internet, provide interactive learning and individualization of the learning process, and assist in the management of the educational institution by providing effective communication and data analysis. These technologies stimulate the development of digital skills among students and prepare them for the demands of the modern labor market, making them an important tool for achieving high quality education. However, it was established that information technologies can have some negative impact on the quality of education in higher education. In particular, students may spend more time on social media and other entertainment aspects of the Internet, which affects their concentration and academic performance. The Internet may be a source of unverified or unreliable information, which may lead to incorrect understanding and use of the material. In addition, problems with access to the Internet, computer programs and other technical aspects may arise and interfere with the normal course of study. In connection with the deepening informatization of society, the main aspects of the application of information technologies in higher education are highlighted and investigated. The proposed measures are aimed at solving organizational and methodical problems of informatization of education in order to promote the further development of IT infrastructure in higher education.
- Open Access
- 1 January 2023
- Published by National Transport University in Automobile Roads and Road Construction
- No. 114.1,p. 151-159
PLANETARY GEARS DYNAMIC MODEL OF ROAD MACHINE DRIVES FOR CALCULATING FORCED VIBRATIONS
- 1 January 2023
- Published by National Transport University in Automobile Roads and Road Construction
- No. 114.1,p. 151-159
Open AccessPLANETARY GEARS DYNAMIC MODEL OF ROAD MACHINE DRIVES FOR CALCULATING FORCED VIBRATIONS
- 18 March 2021
- Published by National Transport University in Automobile Roads and Road Construction
- No. 110,p. 26-34
Investigation of the thermally stressed state of shallow shells on a rigid base with a sliding contact layers using analytic solutions of equations оf elasticity theory
Modern calculations of layered plates and shells in a three-dimensional formulation are based on a technique where the distribution of the desired functions over the thickness of a structure is sought by the method of discrete orthogonalization. In this article, based on the approaches developed by the authors, the thermally stressed state of layered composite shallow shells with a rigidly fixed lower surface is analyzed. The distribution of the desired functions over the thickness of the structure is found based on the exact analytical solution of the system of differential equations. An approach to the study of the thermal stress state of shallow composite shells is considered, and an analytical model is constructed for calculating the thermal stress state of shallow shells on a rigid base with a sliding contact of the layers. Currently, this is a very urgent task when calculating the pavement of bridges. A feature of this approach is the assignment of the desired functions to the outer surfaces of the layers, which allows one to break the layer into sublayers, reducing the approximation error to almost zero. Using the model in question, an analysis of flat layered composite shells on a rigid base with a sliding contact of the layers under the influence of temperature loading was carried out. To build a spatial model, a load option is selected with temperature loads (according to the sine law) and boundary conditions (Navier), which lead to the distribution of the desired functions in terms of a plate with trigonometric harmonics of the Fourier series. A polynomial approximation of the desired functions by thickness is involved. Using the model in question, an analysis of flat layered composite shells on a rigid base with a sliding contact of the layers under the influence of temperature loading was carried out. The considered example showed that the proposed model provides sufficient accuracy in the calculations of layered shallow shells when considering each layer within one sublayer. The proposed approach can be used as a reference method for testing applied approaches in calculating various stress states of layered flat composite shells.
- 18 March 2021
- Published by National Transport University in Automobile Roads and Road Construction
- No. 110,p. 26-34
Investigation of the thermally stressed state of shallow shells on a rigid base with a sliding contact layers using analytic solutions of equations оf elasticity theory
Modern calculations of layered plates and shells in a three-dimensional formulation are based on a technique where the distribution of the desired functions over the thickness of a structure is sought by the method of discrete orthogonalization. In this article, based on the approaches developed by the authors, the thermally stressed state of layered composite shallow shells with a rigidly fixed lower surface is analyzed. The distribution of the desired functions over the thickness of the structure is found based on the exact analytical solution of the system of differential equations. An approach to the study of the thermal stress state of shallow composite shells is considered, and an analytical model is constructed for calculating the thermal stress state of shallow shells on a rigid base with a sliding contact of the layers. Currently, this is a very urgent task when calculating the pavement of bridges. A feature of this approach is the assignment of the desired functions to the outer surfaces of the layers, which allows one to break the layer into sublayers, reducing the approximation error to almost zero. Using the model in question, an analysis of flat layered composite shells on a rigid base with a sliding contact of the layers under the influence of temperature loading was carried out. To build a spatial model, a load option is selected with temperature loads (according to the sine law) and boundary conditions (Navier), which lead to the distribution of the desired functions in terms of a plate with trigonometric harmonics of the Fourier series. A polynomial approximation of the desired functions by thickness is involved. Using the model in question, an analysis of flat layered composite shells on a rigid base with a sliding contact of the layers under the influence of temperature loading was carried out. The considered example showed that the proposed model provides sufficient accuracy in the calculations of layered shallow shells when considering each layer within one sublayer. The proposed approach can be used as a reference method for testing applied approaches in calculating various stress states of layered flat composite shells.
- 1 February 2021
- Published by National Transport University in Automobile Roads and Road Construction
- No. 109,p. 41-48
The construction of a spatial model for calculating the thermally stressed state of shallow shells on a rigid basis
Modern calculations of layered plates and shells in a three-dimensional formulation are based on a technique where the distribution of the desired functions over the thickness of a structure is sought by the method of discrete orthogonalization. In this article, based on the approaches developed by the authors, the thermally stressed state of layered composite shallow shells with a rigidly fixed lower surface is analyzed. The distribution of the desired functions over the thickness of the structure is found based on the exact analytical solution of the system of differential equations. An approach to studying the thermally stressed state of layered composite shells is also considered, and a spatial model for calculating the thermally stressed state of shallow shells on a rigid basis is constructed. Currently, this is a very urgent task when calculating the pavement of bridges. A feature of this approach is the assignment of the desired functions to the outer surfaces of the layers, which allows one to break the layer into sublayers, reducing the approximation error to almost zero. To build a spatial model, a load option is selected with temperature loads (according to the sine law) and boundary conditions (Navier), which lead to the distribution of the desired functions in terms of a plate with trigonometric harmonics of the Fourier series. A polynomial approximation of the desired functions by thickness is involved. Using the model under consideration, an analysis of flat layered composite shells on a rigid basis under the influence of temperature load was carried out. The considered example showed that the proposed model provides sufficient accuracy in the calculations of layered shallow shells when considering each layer within one sublayer. When dividing each layer into 32, 64, 128 sublayers, almost the same result was obtained. The proposed approach can be used as a reference method for testing applied approaches in calculating the stress states of layered shallow composite shells.
- 1 February 2021
- Published by National Transport University in Automobile Roads and Road Construction
- No. 109,p. 41-48
The construction of a spatial model for calculating the thermally stressed state of shallow shells on a rigid basis
Modern calculations of layered plates and shells in a three-dimensional formulation are based on a technique where the distribution of the desired functions over the thickness of a structure is sought by the method of discrete orthogonalization. In this article, based on the approaches developed by the authors, the thermally stressed state of layered composite shallow shells with a rigidly fixed lower surface is analyzed. The distribution of the desired functions over the thickness of the structure is found based on the exact analytical solution of the system of differential equations. An approach to studying the thermally stressed state of layered composite shells is also considered, and a spatial model for calculating the thermally stressed state of shallow shells on a rigid basis is constructed. Currently, this is a very urgent task when calculating the pavement of bridges. A feature of this approach is the assignment of the desired functions to the outer surfaces of the layers, which allows one to break the layer into sublayers, reducing the approximation error to almost zero. To build a spatial model, a load option is selected with temperature loads (according to the sine law) and boundary conditions (Navier), which lead to the distribution of the desired functions in terms of a plate with trigonometric harmonics of the Fourier series. A polynomial approximation of the desired functions by thickness is involved. Using the model under consideration, an analysis of flat layered composite shells on a rigid basis under the influence of temperature load was carried out. The considered example showed that the proposed model provides sufficient accuracy in the calculations of layered shallow shells when considering each layer within one sublayer. When dividing each layer into 32, 64, 128 sublayers, almost the same result was obtained. The proposed approach can be used as a reference method for testing applied approaches in calculating the stress states of layered shallow composite shells.