HWHelena Weigand

Helena Weigand

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Helena Weigand has a total of 122 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Electro-optic Modulation in Polycrystalline Barium Titanate Metasurfaces Enhanced by Poling

    by Eleni Prountzou, Helena C. Weigand, Virginia Falcone, Ülle-Linda Talts, Morgan Trassin, Rachel Grange

    Electrically tunable metasurfaces leveraging the strong Pockels effect in barium titanate (BaTiO3 or BTO) are a promising platform for reconfigurable free-space optical devices. However, the high cost, limited scalability, and restricted substrate compatibility of epitaxial BTO films hinder its exploitation. Here, we demonstrate free-space optical modulators based on imprinted BTO metasurfaces with targeted designs for optical and electric field confinement within the active material. With resonances exhibiting high quality factors of up to 200, we demonstrate improved transmission modulation at sub-volt driving amplitudes and frequencies up to 5 MHz. Additional enhancement is achieved via ferroelectric domain alignment, resulting in up to 25% higher modulation strength compared to the unbiased case and up to 75% compared to previous demonstrations. This enhanced EO response, arising from the effective permittivity engineering and domain orientation in these polycrystalline metasurfaces, holds significant potential for scalable and efficient EO modulators and active metasurfaces.


  • Open Access

    Scalable Lithium Niobate Nanoimprinting for Nonlinear Metalenses

    by Ülle‐Linda Talts, Helena Weigand, Irene Occhiodori, Rachel Grange

    Miniaturizing nonlinear optical components is essential for integrating advanced light manipulation into compact photonic devices, enabling scalable and cost‐effective applications. While monocrystalline lithium niobate thin films advance nonlinear nanophotonics, their high inertness limits the design of top‐down fabricated nanostructures. A versatile bottom‐up fabrication method based on nanoimprint lithography is presented for achieving polycrystalline lithium niobate nanostructures and demonstrate its significant potential for nonlinear metasurfaces. The fabrication enables nearly vertical features and aspect ratios of up to 6 combined, which we combine with a novel solution‐derived material with high effective second‐order nonlinearity d eff of 5 pm V −1 . On this platform, second‐harmonic focusing is demonstrated over a broad spectral range from near‐ultraviolet to near‐infrared, increasing the nonlinear signal intensity by up to 34 times. This method enables the first lithium niobate metalens and expands the field of nonlinear metasurfaces by providing a low‐cost, highly scalable fabrication method for engineered nonlinear nanostructures.


  • Top Cited Papers
    Open Access

    Polarization-entangled Bell state generation from an epsilon-near-zero metasurface

    by Wenhe Jia, Grégoire Saerens, Ülle-Linda Talts, Helena Weigand, Robert J. Chapman, Liu Li, Rachel Grange, Yuanmu Yang

    Pairs of polarization-entangled photons are important for diverse quantum technologies, such as quantum communication, computation, and imaging. However, generating complex polarization-entangled states has long been constrained by the available nonlinear susceptibility tensor of natural materials, necessitating cumbersome setups for additional coherent superposition or postselection. In this study, we experimentally demonstrate the generation of pairs of polarization-entangled photons using a plasmonic metasurface strongly coupled to an epsilon-near-zero (ENZ) material. By engineering a resonance at the pump wavelength and leveraging the field enhancement provided by the ENZ effect, the photon pair generation efficiency of the 68-nanometer-thick metasurface is substantially boosted compared to that of an unpatterned indium tin oxide film. More notably, the ENZ metasurface platform facilitates versatile manipulation of the system’s anisotropic second-order nonlinear susceptibility tensor, enabling direct control over the polarization states of the photon pairs and generating a polarization-entangled Bell state without additional components. This approach enables simultaneous photon pair generation and quantum state engineering in a compact platform.


  • Open Access

    A Simplified Model for Polycrystalline BaTiO3 Nanoresonator for Second Harmonic Generation

    by Andrea Tognazzi, Paolo Franceschini, Helena Weigand, Ülle‐Linda Talts, Alfonso Carmelo Cino, Rachel Grange, Costantino De Angelis

    Second Harmonic Generation (SHG) has become a critical technique in material characterization, image processing and microscopy. While bulk crystals have been traditionally used for SHG due to their high conversion efficiencies, limited control over radiation properties, delicate phase‐matching conditions and alignment pose significant challenges. The exploration of nanoscale materials and structures based on dielectric platforms has provided enhanced SHG efficiency and control, but their limited transparency in the visible spectral range and complex fabrication processes hinder broader application. Barium titanate (BaTiO3), a ferroelectric material with spontaneous polarization and nonlinear optical behavior, presents an attractive alternative due to its suitability for nano‐imprinting techniques, facilitating scalable production of metasurfaces. In this study, SHG from single polycrystalline BaTiO3 nanocylinders is investigated. Through polarization‐dependent experiments, the influence of crystalline domain orientation and arrangements within the nanocylinders on SHG efficiency is characterized. A simplified numerical model to interpret the different polarization‐dependent SHG diagrams obtained from nominally identical nanocylinders is developed. The results reveal the significant impact of domain geometry and relative size on SHG characteristics. By understanding the relationship between domain geometry and SHG giving insights into the material characterization and design optimization of BaTiO3 and other polycrystalline nanostructures in nonlinear optical devices.

  • From high- to low-contrast: the role of asymmetries in dielectric gratings supporting bound states in the continuum

    by Maria Antonietta Vincenti, Luca Carletti, Domenico de Ceglia, Davide Rocco, H. Weigand, Gregoire Saerens, Virginia Falcone, Rachel Grange, Hooman Barati Sedeh, Wenhao Li, et al.

    One-dimensional sub-wavelength gratings are versatile photonic platforms supporting diverse resonances, including symmetry-protected bound states in the continuum. However, practical access to these bound modes relies on their quasi-bound form, which necessitates the introduction of perturbations in either geometry or material properties. Despite having a large, finite quality factor, quasi-bound modes retain their characteristically strong field confinement. Gaining control over field localization and leakage of quasi-bound modes requires an investigation not limited to studying the degree of asymmetry and the incoming polarization. Here, we demonstrate that by carefully combining specific types of asymmetries and refractive index contrast between the grating and its surrounding environment, one can tailor field localization and Q-factor almost at will. Our findings reveal a strategic roadmap for optimizing quasi-bound mode implementation, dramatically improving their use in applications such as optical communication, sensing, and nonlinear optical processes.


  • Top Cited Papers
    Open Access

    Roadmap on photonic metasurfaces

    by Sebastian A. Schulz, Rupert. F. Oulton, Mitchell Kenney, Andrea Alù, Isabelle Staude, Ayesheh Bashiri, Zlata Fedorova, Radoslaw Kolkowski, A. Femius Koenderink, Xiaofei Xiao, et al.

    Here we present a roadmap on Photonic metasurfaces. This document consists of a number of perspective articles on different applications, challenge areas or technologies underlying photonic metasurfaces. Each perspective will introduce the topic, present a state of the art as well as give an insight into the future direction of the subfield.


  • Open Access

    Phase-Controlled Synthesis and Phase-Change Properties of Colloidal Cu–Ge–Te Nanoparticles

    by Dhananjeya Kumaar, Matthias Can, Helena Weigand, Olesya Yarema, Simon Wintersteller, Rachel Grange, Vanessa Wood, Maksym Yarema

    Phase-change memory (PCM) technology has recently attracted a vivid interest for neuromorphic applications, in-memory computing, and photonic integration due to the tunable refractive index and electrical conductivity between the amorphous and crystalline material states. Despite this, it is increasingly challenging to scale down the device dimensions of conventionally sputtered PCM memory arrays, restricting the implementation of PCM technology in mass applications such as consumer electronics. Here, we report the synthesis and structural study of sub-10 nm Cu-Ge-Te (CGT) nanoparticles as suitable candidates for low-cost and ultrasmall PCM devices. We show that our synthesis approach can accurately control the structure of the CGT colloids, such as composition-tuned CGT amorphous nanoparticles as well as crystalline CGT nanoparticles with trigonal α-GeTe and tetragonal Cu2GeTe3 phases. In situ characterization techniques such as high-temperature X-ray diffraction and X-ray absorption spectroscopy reveal that Cu doping in GeTe improves the thermal properties and amorphous phase stability of the nanoparticles, in addition to nanoscale effects, which enhance the nonvolatility characteristics of CGT nanoparticles even further. Moreover, we demonstrate the thin-film fabrication of CGT nanoparticles and characterize their optical properties with spectroscopic ellipsometry measurements. We reveal that CGT nanoparticle thin films exhibit a negative reflectivity change and have good reflectivity contrast in the near-IR spectrum. Our work promotes the possibility to use PCM in nanoparticle form for applications such as electro-optical switching devices, metalenses, reflectivity displays, and phase-change IR devices.


  • Open Access

    Large‐Scale Bottom‐Up Fabricated 3D Nonlinear Photonic Crystals

    by Viola Valentina Vogler‐Neuling, Ülle‐Linda Talts, Rebecca Ferraro, Helena Weigand, Giovanni Finco, Joel Winiger, Peter Benedek, Justine Kusch, Artemios Karvounis, Vanessa Wood, et al.

    Nonlinear optical effects are used to generate coherent light at wavelengths difficult to reach with lasers. Materials periodically poled or nanostructured in the nonlinear susceptibility in three spatial directions are called 3D nonlinear photonic crystals (NPhCs). They enable enhanced nonlinear optical conversion efficiencies, emission control, and simultaneous generation of nonlinear wavelengths. The chemical inertness of efficient second‐order nonlinear materials () prohibits their nanofabrication until 2018. The current methods are restricted to top‐down laser‐based techniques limiting the periodicity along the z‐axis to . The first bottom‐up fabricated 3D NPhC is demonstrated in sol–gel‐derived barium titanate by soft‐nanoimprint lithography: a woodpile with eight layers and periodicities of (‐plane) and (z‐plane). The surface areas exceed , which is two orders of magnitude larger than the state‐of‐the‐art. This study is expected to initiate bottom‐up fabrication of 3D NPhCs with a supremely strong and versatile nonlinear response.


  • Open Access

    Nanoimprinting Solution-Derived Barium Titanate for Electro-Optic Metasurfaces

    by Helena C. Weigand, Ülle-Linda Talts, Anna-Lydia Vieli, Viola V. Vogler-Neuling, Alfonso Nardi, Rachel Grange

    Electro-optic metasurfaces have demonstrated significant potential in enhancing the modulation speed and efficiency for fast and large-scale free-space optical devices. Barium titanate has a strong electro-optic Pockels coefficient, but its availability in thin-film form is restricted due to costly growth processes or low thickness. Here, we fabricated active metasurfaces using an etch-free bottom-up process with sol-gel-based polycrystalline barium titanate with a large electro-optic coefficient similar to bulk lithium niobate. We achieve strong hybrid Mie/surface lattice resonances with a quality-factor of 200 at 633 nm wavelength, enhancing the light-matter interaction and therefore the Pockels effect. The metasurface transmission is electro-optically modulated with up to 5 MHz driving frequency at low voltages of less than 1 V thanks to resonant enhancement of the modulation amplitude by 2 orders of magnitude. This successful demonstration of electro-optic modulation in nanoimprinted barium titanate structures paves the way for low-cost and large-scale free-space modulators or tunable metalenses.


  • Open Access

    Sol–Gel Barium Titanate Nanohole Array as a Nonlinear Metasurface and a Photonic Crystal

    by Ülle‐Linda Talts, Helena C. Weigand, Grégoire Saerens, Peter Benedek, Joel Winiger, Vanessa Wood, Jürg Leuthold, Viola Vogler‐Neuling, Rachel Grange

    The quest of a nonlinear optical material that can be easily nanostructured over a large surface area is still ongoing. Here, we demonstrate a nanoimprinted nonlinear barium titanate 2D nanohole array that shows the optical properties of a 2D photonic crystal and a metasurface, depending on the direction of the optical axis. The challenge of nanostructuring the inert metal‐oxide is resolved by direct soft nanoimprint lithography with sol–gel derived barium titanate enabling critical dimensions of 120 nm with aspect ratios of five. The nanohole array exhibits a photonic bandgap in the infrared range when probed along the slab axis, while lattice resonant states are observed in out‐of‐plane transmission configuration. The enhanced light‐matter interaction from the resonant structure enables to increase in the second‐harmonic generation in the near‐ultraviolet by a factor of 18 illustrating the potential in the flexible fabrication technique for barium titanate photonic devices.