Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rizwan Muneer has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nano-polymer–assisted enhanced oil recovery in oil wet carbonate formations: Coreflood experimental insights

    by Altamish Ahmed Pakeer, Yahia Baouchi, Younes Alblooshi, Rizwan Muneer, Ali U. Chaudhry, Harris Sajjad Rabbani, Muhammed Rehan Hashmet

  • Open Access

    Recent advancements in novel nanoparticles as foam stabilizer: Prospects in EOR and CO2 sequestration

    by Ali U. Chaudhry, Rizwan Muneer, Zeeshan Ali Lashari, Muhammad Rehan Hashmet, Kofi Osei-Bonsu, Ahmed Abdala, Harris Sajjad Rabbani


  • Open Access

    Unlocking the Power of Artificial Intelligence: Accurate Zeta Potential Prediction Using Machine Learning

    by Rizwan Muneer, Muhammad Rehan Hashmet, Peyman Pourafshary, Mariam Shakeel

    Nanoparticles have gained significance in modern science due to their unique characteristics and diverse applications in various fields. Zeta potential is critical in assessing the stability of nanofluids and colloidal systems but measuring it can be time-consuming and challenging. The current research proposes the use of cutting-edge machine learning techniques, including multiple regression analyses (MRAs), support vector machines (SVM), and artificial neural networks (ANNs), to simulate the zeta potential of silica nanofluids and colloidal systems, while accounting for affecting parameters such as nanoparticle size, concentration, pH, temperature, brine salinity, monovalent ion type, and the presence of sand, limestone, or nano-sized fine particles. Zeta potential data from different literature sources were used to develop and train the models using machine learning techniques. Performance indicators were employed to evaluate the models’ predictive capabilities. The correlation coefficient (r) for the ANN, SVM, and MRA models was found to be 0.982, 0.997, and 0.68, respectively. The mean absolute percentage error for the ANN model was 5%, whereas, for the MRA and SVM models, it was greater than 25%. ANN models were more accurate than SVM and MRA models at predicting zeta potential, and the trained ANN model achieved an accuracy of over 97% in zeta potential predictions. ANN models are more accurate and faster at predicting zeta potential than conventional methods. The model developed in this research is the first ever to predict the zeta potential of silica nanofluids, dispersed kaolinite, sand–brine system, and coal dispersions considering several influencing parameters. This approach eliminates the need for time-consuming experimentation and provides a highly accurate and rapid prediction method with broad applications across different fields.


  • Open Access

    Laboratory Investigation of Nanofluid-Assisted Polymer Flooding in Carbonate Reservoirs

    by Kassymzhomart Ulasbek, Muhammad Rehan Hashmet, Peyman Pourafshary, Rizwan Muneer

    In the petroleum industry, the remaining oil is often extracted using conventional chemical enhanced oil recovery (EOR) techniques, such as polymer flooding. Nanoparticles have also greatly aided EOR, with benefits like wettability alteration and improvements in fluid properties that lead to better oil mobility. However, silica nanoparticles combined with polymers like hydrolyzed polyacrylamide (HPAM) improve polymer flooding performance with better mobility control. The oil displacement and the interaction between the rock and polymer solution are both influenced by this hybrid approach. In this study, we investigated the effectiveness of the injection of nanofluid-polymer as an EOR approach. It has been observed that nanoparticles can change rock wettability, increase polymer viscosity, and decrease polymer retention in carbonate rock. The optimum concentrations for hydrolyzed polyacrylamide (2000 ppm) and 0.1 wt% (1000 ppm) silica nanoparticles were determined through rheology experiments and contact angle measurements. The results of the contact angle measurements revealed that 0.1 wt% silica nanofluid alters the contact angle by 45.6°. The nano-silica/polymer solution resulted in a higher viscosity than the pure polymer solution as measured by rheology experiments. A series of flooding experiments were conducted on oil-wet carbonate core samples in tertiary recovery mode. The maximum incremental oil recovery of 26.88% was obtained by injecting silica nanofluid followed by a nanofluid-assisted polymer solution as an EOR technique. The application of this research will provide new opportunities for hybrid EOR techniques in maximizing oil production from depleted high-temperature and high-salinity carbonate reservoirs.


  • Open Access

    Application of DLVO Modeling to Study the Effect of Silica Nanofluid to Reduce Critical Salt Concentration in Sandstones

    by Rizwan Muneer, Muhammad Rehan Hashmet, Peyman Pourafshary

    Critical salt concentration (CSC) is the minimum salt concentration of injected water used for different oil recovery operations, below which fines migration initiates within sandstone reservoirs having clay contents and could be one of the potential causes of formation damage. This paper estimated CSC for Berea sandstone-NaCl brine system experimentally and by using DLVO modeling based on Van der Waals and electric double layer (EDL) surface forces. Furthermore, the effectiveness of silica nanofluid to reduce CSC and control fines migration was investigated. At different salinities of the injected fluid, the experimental CSC was determined by performing corefloods and analyzing effluent turbidity and absorbance. Attractive (van der Waals) and repulsive (EDL) forces were estimated by DLVO theory to predict the value of CSC. The experimental data were used to validate the model. The application of silica nanoparticles (NPs) was studied by injecting 0.1 wt% silica nanofluid and the resultant reduction in CSC was observed. During the injection of brines at different salinities ranging from 0.2 M to 0.05 M into the sandstone porous media, fines production was detected in the effluent after the injection of 0.1M NaCl solution, indicating that the CSC was 0.1M for this sand-fine-brine (SFB) system. The zeta potentials for SFB systems of different salinities were measured by zeta-sizer and were in the range of -32 mV to -24 mV. DLVO model based on attractive and repulsive forces was then used to predict the CSC, at which the total DLVO energy shifts from negative to positive and was around 0.1M for NaCl solution. The model prediction was in close agreement with the experimental results. Both the experiment and DLVO model showed the efficiency of silica nanofluid to mitigate fines migration as no fines production was observed for 0.1M NaCl case after the treatment with nanofluid. The estimation of CSC is critical to avoid formation damage during many oil recovery processes, included but not limited to low salinity waterflooding and alkaline flooding. The utilization of nanofluid provided promising results in controlling fines migration and reducing CSC. The proposed model based on DLVO theory can work as a useful tool to predict CSC without the need for extensive experimental work.