Zohreh Hirbodvash
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zohreh Hirbodvash has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Pierre Berini
University of Ottawa
2 shared publications Anthony Olivieri
Center for Research in Photonics, University of Ottawa, Ottawa, Ontario K1N 6N5, Canada
1 shared publication- Anthony Olivieri
Center for Research in Photonics, University of Ottawa, 25 Templeton St., Ottawa, ON K1N 6N5, Canada
1 shared publication - Elena A. Baranova
University of Ottawa
1 shared publication Ewa Lisicka-Skrzek
Center for Research in Photonics, University of Ottawa, Ottawa, Ontario K1N 6N5, Canada
1 shared publicationHoward Northfield
Center for Research in Photonics, University of Ottawa, Ottawa, Ontario K1N 6N5, Canada
1 shared publication
Latest Publications
- Open Access
- 19 March 2023
- Published by MDPI AG in Chemosensors
- Vol. 11 (3) , 196
Surface Plasmon Electrochemistry: Tutorial and Review
Surface plasmon polaritons (SPPs) are optical surface waves propagating along a metal surface. They exhibit attributes such as field enhancement and sub-wavelength localization, which make them attractive for surface sensing, as they are heavily exploited in surface plasmon biosensors. Electrochemistry also occurs on metal surfaces, and electrochemical techniques are also commonly applied in biosensors. As metal surfaces are integral in both, it is natural to combine these techniques into a single platform. Motivations include: (i) realising a multimodal biosensor (electrochemical and optical), (ii) using SPPs to probe the electrochemical double layer or to probe electrochemical activity, thus revealing complementary information on redox reactions, or (iii) using SPPs to pump electrochemical reactions by creating non-equilibrium energetic electrons and holes in a working electrode through the absorption of SPPs thereon. The latter is of interest as it may yield novel redox reaction pathways (i.e., plasmonic electrocatalysis).
- 19 March 2023
- Published by MDPI AG in Chemosensors
- Vol. 11 (3) , 196
Open AccessSurface Plasmon Electrochemistry: Tutorial and Review
Surface plasmon polaritons (SPPs) are optical surface waves propagating along a metal surface. They exhibit attributes such as field enhancement and sub-wavelength localization, which make them attractive for surface sensing, as they are heavily exploited in surface plasmon biosensors. Electrochemistry also occurs on metal surfaces, and electrochemical techniques are also commonly applied in biosensors. As metal surfaces are integral in both, it is natural to combine these techniques into a single platform. Motivations include: (i) realising a multimodal biosensor (electrochemical and optical), (ii) using SPPs to probe the electrochemical double layer or to probe electrochemical activity, thus revealing complementary information on redox reactions, or (iii) using SPPs to pump electrochemical reactions by creating non-equilibrium energetic electrons and holes in a working electrode through the absorption of SPPs thereon. The latter is of interest as it may yield novel redox reaction pathways (i.e., plasmonic electrocatalysis).
- Open Access
- 28 September 2021
- Published by MDPI AG in Chemosensors
- Vol. 9 (10) , 277
Electrochemical Performance of Lithographically-Defined Micro-Electrodes for Integration and Device Applications
Small; lithographically-defined and closely-spaced metallic features of dimensions and separation in the micrometer range are of strong interest as working and counter electrodes in compact electrochemical sensing devices. Such micro-electrode systems can be integrated with microfluidics and optical biosensors, such as surface plasmon waveguide biosensors, to enable multi-modal sensing strategies. We investigate lithographically-defined gold and platinum micro-electrodes experimentally, via cyclic voltammetry (CV) measurements obtained at various scan rates and concentrations of potassium ferricyanide as the redox species, in potassium nitrate as the supporting electrolyte. The magnitude of the double-layer capacitance is estimated using the voltammograms. Concentration curves for potassium ferricyanide are extracted from our CV measurements as a function of scan rate, and could be used as calibration curves from which an unknown concentration of potassium ferricyanide in the range of 0.5–5 mM can be determined. A blind test was done to confirm the validity of the calibration curve. The diffusion coefficient of potassium ferricyanide is also extracted from our CV measurements by fitting to the Randles–Sevcik equation (D = 4.18 × 10−10 m2/s). Our CV measurements were compared with measurements obtained using macroscopic commercial electrodes, yielding good agreement and verifying that the shape of our CV curves do not depend on micro-electrode geometry (only on area). We also compare our CV measurements with theoretical curves computed using the Butler–Volmer equation, achieving essentially perfect agreement while extracting the rate constant at zero potential for our redox species (ko = 10−6 m/s). Finally, we demonstrate the importance of burn-in to stabilize electrodes from the effects of electromigration and grain reorganization before use in CV measurements, by comparing with results obtained with as-deposited electrodes. Burn-in (or equivalently, annealing) of lithographic microelectrodes before use is of general importance to electrochemical sensing devices
- 28 September 2021
- Published by MDPI AG in Chemosensors
- Vol. 9 (10) , 277
Open AccessElectrochemical Performance of Lithographically-Defined Micro-Electrodes for Integration and Device Applications
Small; lithographically-defined and closely-spaced metallic features of dimensions and separation in the micrometer range are of strong interest as working and counter electrodes in compact electrochemical sensing devices. Such micro-electrode systems can be integrated with microfluidics and optical biosensors, such as surface plasmon waveguide biosensors, to enable multi-modal sensing strategies. We investigate lithographically-defined gold and platinum micro-electrodes experimentally, via cyclic voltammetry (CV) measurements obtained at various scan rates and concentrations of potassium ferricyanide as the redox species, in potassium nitrate as the supporting electrolyte. The magnitude of the double-layer capacitance is estimated using the voltammograms. Concentration curves for potassium ferricyanide are extracted from our CV measurements as a function of scan rate, and could be used as calibration curves from which an unknown concentration of potassium ferricyanide in the range of 0.5–5 mM can be determined. A blind test was done to confirm the validity of the calibration curve. The diffusion coefficient of potassium ferricyanide is also extracted from our CV measurements by fitting to the Randles–Sevcik equation (D = 4.18 × 10−10 m2/s). Our CV measurements were compared with measurements obtained using macroscopic commercial electrodes, yielding good agreement and verifying that the shape of our CV curves do not depend on micro-electrode geometry (only on area). We also compare our CV measurements with theoretical curves computed using the Butler–Volmer equation, achieving essentially perfect agreement while extracting the rate constant at zero potential for our redox species (ko = 10−6 m/s). Finally, we demonstrate the importance of burn-in to stabilize electrodes from the effects of electromigration and grain reorganization before use in CV measurements, by comparing with results obtained with as-deposited electrodes. Burn-in (or equivalently, annealing) of lithographic microelectrodes before use is of general importance to electrochemical sensing devices
- 10 April 2019
- Published by Optica Publishing Group in Applied Optics
- Vol. 58 (11) , 2994-3002
Grating couplers fabricated by e-beam lithography for long-range surface plasmon waveguides embedded in a fluoropolymer
Long-range surface plasmon polariton waveguides consisting of Au stripes integrated with input and output grating couplers embedded in thick Cytop claddings are proposed and demonstrated experimentally. Under the right conditions, grating couplers enable broadside (top) coupling with good efficiency while producing a low level of background light. The scheme does not require high-quality input and output edge facets, and it simplifies optical alignments. We demonstrate coupling using a cleaved bow-tie fiber and a lensed fiber, and we determine the grating coupling efficiencies in both cases over a broad operating wavelength range. The lensed fiber produces a better overlap with the long-range surface plasmon mode of interest and thus results in a better coupling efficiency with essentially no background light as observed on an infrared camera. The measurements are compared with theoretical results obtained using a realistic model of the structures, including out-of-plane curvature in the grating profile resulting from our fabrication process. The coupling scheme along with the surface plasmon waveguides hold strong potential for biosensing applications.
- 10 April 2019
- Published by Optica Publishing Group in Applied Optics
- Vol. 58 (11) , 2994-3002
Grating couplers fabricated by e-beam lithography for long-range surface plasmon waveguides embedded in a fluoropolymer
Long-range surface plasmon polariton waveguides consisting of Au stripes integrated with input and output grating couplers embedded in thick Cytop claddings are proposed and demonstrated experimentally. Under the right conditions, grating couplers enable broadside (top) coupling with good efficiency while producing a low level of background light. The scheme does not require high-quality input and output edge facets, and it simplifies optical alignments. We demonstrate coupling using a cleaved bow-tie fiber and a lensed fiber, and we determine the grating coupling efficiencies in both cases over a broad operating wavelength range. The lensed fiber produces a better overlap with the long-range surface plasmon mode of interest and thus results in a better coupling efficiency with essentially no background light as observed on an infrared camera. The measurements are compared with theoretical results obtained using a realistic model of the structures, including out-of-plane curvature in the grating profile resulting from our fabrication process. The coupling scheme along with the surface plasmon waveguides hold strong potential for biosensing applications.