IPInna N. Ponomareva

Inna N. Ponomareva

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Inna N. Ponomareva has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Alternative approach to justifying rational bottomhole pressures during the operation oil wells

    by Inna N. Ponomareva, Roman O. Mekhonoshin

    Relevance. Substantiating rational bottomhole pressure values is a critical task in monitoring and managing oil well operations. Uncontrolled reductions in bottomhole pressure aimed at creating high reservoir drawdowns and increasing oil inflow contribute to a number of negative factors both in the well itself and in the adjacent near-wellbore zone (oil degassing, reservoir void deformation, etc.). The most appropriate approach to substantiating rational bottomhole pressure values is the analysis of indicator diagrams obtained during actual well testing across a wide range of drawdowns. Currently, such studies are rarely conducted, and indirect approaches, often based on various types of modeling, are used to substantiate rational bottomhole pressure values. Existing approaches, however, typically rely on considering only one factor complicating oil inflow as bottomhole pressure decreases. This article is devoted to the development of a new approach to the substantiation of rational bottomhole pressures, which considers the geological and technological parameters of wells. Aim. Substantiation of rational and critical values of bottomhole pressure for real-life oil field conditions, considering the complex, in some cases multidirectional, relationship between its value and other geological and technological parameters of wells. Methods. Multiple regression analysis using a wide range of field indicators characterizing the non-stationary state of the "reservoir–wellbore" system. Results and conclusions. A series of multivariate statistical models were constructed, establishing the relationship between bottomhole pressure and a set of geological and technological parameters of wells. A detailed study of the statistical modeling, carried out based on cumulative correlation analysis, made it possible to substantiate the rational (8.3 MPa) and critical (6.3 MPa) values of bottomhole pressure for the conditions of the field under consideration. For citation: Mekhonoshin R.O., Ponomareva I.N. Alternative approach to justifying rational bottomhole pressures during the operation oil wells. Bulletin of the Tomsk Polytechnic University. Geo Assets Engineering, 2026, vol. 337, no. 8, pp. 65–76. http://doi.org/10.18799/24131830/2026/8/5377

  • Open Access

    FEATURES OF DETERMINING FILTRATION PARAMETERS OF COMPLEX CARBONATE RESERVOIRS AT THEIR OPERATION BY HORIZONTAL WELLS

    by Olga L Salnikova, Irina A Chernykh, Dmitriy A Martyushev, Inna N Ponomareva

    Link for citation: Salnikova O.L., Chernykh I.A., Martyushev D.A., Ponomareva I.N. Features of determining filtration parameters of complex carbonate reservoirs at their operation by horizontal wells. Bulletin of the Tomsk Polytechnic University. Geo Аssets Engineering, 2023, vol. 334, no. 5, рр.137-147 In Rus. The relevance of the research is caused by the fact that in the conditions of continuous deterioration in the structure of hydrocarbon reserves, complex technologies for their development are being implemented, based, among other things, on the use of wells of complex design (horizontal wells). The increase in the share of horizontal wells in the total operating stock determines the relevance of the scientific and methodological justification of research technologies that comprehensively take into account the structural features of the reservoir and the geometry of the fluid flow. The most complete volume of geological and field information can be obtained by combining two main types of research – geophysical and hydrodynamic. The problem of data, in fact, of the indirect research methods, should be considered the need to assess the reliability of their results and the lack of approaches to reduce interpretation uncertainties, which is especially important in the conditions of the impossibility of coring in horizontal wells. This article proposes possible directions for solving these problems. The main aim of the study is the scientific substantiation of approaches to research and interpretation of their results, allowing reliably determining the filtration parameters of productive formations during their operation with horizontal wells. Object: complex Tournaisian-Famenian carbonate reservoirs in Perm region, operated by horizontal wells. Methods: geophysical and hydrodynamic studies of wells, laboratory core studies, multivariate statistical modeling. Results. It has been established that geophysical studies (interpretation was made in accordance with the algorithms for vertical wells) do not allow reliably estimating the length of the horizontal section of the wellbore and the filtration properties of the reservoir. It is recommended to determine the filtration properties when interpreting the data of hydrodynamic studies of wells. Algorithms of modern methods of interpretation of hydrodynamic studies, implemented in common software products, allow you to determine a large amount of geological and field data, including a number of parameters specific to horizontal wells. However, this procedure is accompanied by uncertainties, for example, in terms of the choice of interpretation models. The performed multivariate statistical modeling made it possible to substantiate the methodology for reliably determining the filtration properties of the reservoirs under consideration and the approach to reduce uncertainties when choosing interpretation models.


  • Open Access

    Reproduction of reservoir pressure by machine learning methods and study of its influence on the cracks formation process in hydraulic fracturing

    by Еvgenii V. Filippov, Lev A. Zakharov, Dmitrii A. Martyushev, Inna N. Ponomareva

    Hydraulic fracturing is an effective way to stimulate oil production, which is currently widely used in various conditions, including complex carbonate reservoirs. In the conditions of the considered field, hydraulic fracturing leads to a significant differentiation of technological efficiency indicators, which makes it expedient to study in detail the crack formation patterns. For all affected wells, the assessment of the resulting fractures spatial orientation was performed using the developed indirect technique, the reliability of which was confirmed by geophysical methods. In the course of the analysis, it was found that in all cases the fracture is oriented in the direction of the development system element area, which is characterized by the maximum reservoir pressure. At the same time, reservoir pressure values for all wells were determined at one point in time (at the beginning of hydraulic fracturing) using machine learning methods. The reliability of the used machine learning methods is confirmed by high convergence with the actual (historical) reservoir pressures obtained during hydrodynamic studies of wells. The obtained conclusion about the influence of the formation pressure on the patterns of fracturing should be taken into account when planning hydraulic fracturing in the considered conditions.


  • Ore preparation in deep-sea mining of cobalt-rich ferromanganese crusts

    by D. A. Yungmeister, R. I. Korolev, I. N. Ponomareva, M. V. Kruglyakova

    The article covers the specific features of deep-sea mining of ferromanganese nodules (FMN) and cobalt-rich ferromanganese crusts (CMC) found in exploration areas. Experimental studies have been carried out to establish the physical and mechanical properties of CMC samples. These implied sample exposure to a bidirectional axial load from spherical balls (indenters) and compilation of resulting rock strength data sheets for subsequent evaluation. The processes of impact- and cut-induced CMC failure have been experimentally studied with identification of the impact load and axial cutting force required for ore preparation when using the combined mining approach. The existing FMN and CMC recovery facilities have been analyzed and the fundamental design principles have been developed for deep-sea mining with ore preparation. The FMN and CMC mining concept presented and described in the article features a walkingtype mining machine equipped with operating members designed for ore preparation. The article considers various CMC mining solutions using clamshell grabs with a built-in impact tool for ore preparation. A combined mining approach is proposed, with ore preparation implemented in the form of controlled penetration into the CMC bed and subsequent intensification of the impact-induced bed separation process without damaging the substrate. Two layout options have been analyzed for the use of the impact tool and the mining sequence, with the impact tool built along the grab axis or into the jaws of the grab. The latter option is deemed more efficient as it enables penetration management in line with the impact impulses and allows capturing chipped CMC pieces when the jaws are being closed.

  • Open Access

    Predicting dynamic formation pressure using artificial intelligence methods

    by Lev А. Zakharov, Dmitry А. Martyushev, Inna N. Ponomareva

    Determining formation pressure in the well extraction zones is a key task in monitoring the development of hydrocarbon fields. Direct measurements of formation pressure require prolonged well shutdowns, resulting in underproduction and the possibility of technical problems with the subsequent start-up of wells. The impossibility of simultaneous shutdown of all wells of the pool makes it difficult to assess the real energy state of the deposit. This article presents research aimed at developing an indirect method for determining the formation pressure without shutting down the wells for investigation, which enables to determine its value at any time. As a mathematical basis, two artificial intelligence methods are used – multidimensional regression analysis and a neural network. The technique based on the construction of multiple regression equations shows sufficient performance, but high sensitivity to the input data. This technique enables to study the process of formation pressure establishment during different periods of deposit development. Its application is expedient in case of regular actual determinations of indicators used as input data. The technique based on the artificial neural network enables to reliably determine formation pressure even with a minimal set of input data and is implemented as a specially designed software product. The relevant task of continuing the research is to evaluate promising prognostic features of artificial intelligence methods for assessing the energy state of deposits in hydrocarbon extraction zones.


  • Open Access

    Developing features of the near-bottomhole zones in productive formations at fields with high gas saturation of formation oil

    by Vladislav Galkin, Dmitry Martyushev, И. Н. Пономарева, Irina Chernykh, Д. А. Мартюшев, И. А. Черных

    The article studies the formation features of the bottomhole zones in productive formations during operation of production wells in the north of the Perm Territory. Their distinctive feature is the high gas saturation of formation oil. The most widely used parameter in Russian and world practice – the skin factor was used as a criterion characterizing the state of the bottomhole zone. Analysis of scientific publications has shown that one of the main problems of applying the skin factor to assess the state of bottomhole zones is the ambiguity of interpretations of its physical meaning and the impossibility of identifying the prevailing factors that form its value. The paper proposes an approach to identifying such factors in the conditions of the fields under consideration, based on multivariate correlation-regression analysis. Choice of this tool is due to the complexity of the processes occurring in the “formation – bottomhole zone – well” system. When describing complex multifactorial processes, the chosen method demonstrates a high degree of reliability. For a large number of wells in the region, significant material was collected and summarized, including the results of determining the skin factor (1102 values) during hydrodynamic investigations, as well as data on the values ​​of various geological and technological indicators, which can probably be statistically related to the value of the skin factor. A series of multidimensional mathematical models has been built; the skin factor was used as a predicted parameter, and data on the values ​​of geological and technological indicators were used as independent indicators. Analysis of the constructed models is a key stage of this study. Set of parameters included in the multidimensional models, sequence of their inclusion and contribution to the total value of the achieved determination coefficient as the main indicator for the performance of the constructed models were studied. It has been established that the main factor influencing the state of the bottomhole zone is oil degassing. Significant differences in the formation features of the skin factor in the terrigenous and carbonate sediments at the fields under consideration have been determined.


  • Open Access

    НОВЫЙ ПОДХОД К ОЦЕНКЕ РЕЗУЛЬТАТОВ ГИДРАВЛИЧЕСКОГО РАЗРЫВА ПЛАСТА (НА ПРИМЕРЕ БОБРИКОВСКОЙ ЗАЛЕЖИ ШЕРШНЕВСКОГО МЕСТОРОЖДЕНИЯ)

    by Владислав Игнатьевич Галкин, Инна Николаевна Пономарева, Сергей Сергеевич Черепанов, Евгений Владимирович Филиппов, Дмитрий Александрович Мартюшев

    The relevance of the researchis caused by significant contribution of oil produced as a result of hydraulic fracturing at the wells to its total production. Correct assessment of the results of actually carried out measures for hydraulic fracturing will make it possible to develop clear recommendations on the further application of this method of intensifying oil production for geological and physical conditions of specific fields. The main aim of the research isto evaluate the effect of hydraulic fracturing in relation to the element of the development system in which the well is located – the object of impact. Object: oil producing wells that make up an element of the reservoir development system. Method: geological field research, correlation analysis, schematization of the interaction between wells. Results. It was found that the hydraulic fracturing of the well 221 of the Shershnevskyfield led to a change in the nature of interaction between the wells within the entire element of the development system, which began to work as a single, unidirectional coordinated system. As a result of hydraulic fracturing, there was no redistribution of drainage volumes, but a synergistic effect arose when holding an event in one well led to an increase in flow rates and consistency of the entire element of the development system. Probably, the conduction of hydraulic fracturing in the well 221 led to a significant change in the reservoir filtration parameters in more significant limits than the volume of the drainage zone of this well, and rather large system of channels with reduced filtration resistance appeared in rather large area of ​​the reservoir, as it is customary in classic presentation. Актуальностьисследования обусловлена значительным вкладом объемов нефти, добытых в результате проведения на скважинах гидравлического разрыва пласта, в суммарную добычу. Правильная оценка результатов фактически проведенных мероприятий по гидравлическому разрыву позволит выработать четкие рекомендации по дальнейшему применению данного метода интенсификации добычи нефти для геолого-физических условий конкретных месторождений. Цель:оценить результаты проведения гидравлического разрыва пласта применительно к элементу системы разработки, в котором находится скважина – объект воздействия. Объекты: нефтедобывающие скважины – элемент системы разработки бобриковской залежи Шершневского нефтяного месторождения. Методы:геолого-промысловые исследования, корреляционный анализ, схематизация взаимодействия между скважинами. Результаты. Установлено, что проведение гидравлического разрыва пласта на скважине 221 Шершневского месторождения привело к изменению характера взаимодействия между скважинами в пределах всего элемента системы разработки, который стал работать как единая однонаправленно согласованная система. В результате гидравлического разрыва пласта произошло не просто перераспределение объемов дренирования, а возник синергетический эффект, когда проведение мероприятия в одной скважине привело к росту дебитов и согласованности работы всего элемента системы разработки. Вероятно, проведение гидравлического разрыва пласта в скважине 221 привело к существенному изменению фильтрационных параметров бобриковской залежи Шершневского месторождения в более значительных пределах, нежели объем зоны дренирования этой скважины, и на довольно большом участке залежи возникла целая система каналов с пониженными фильтрационными сопротивлениями, а не единичная трещина, как это принято в классическом представлении.


  • STATISTICAL ASSESSMENT OF THE RELIABILITY OF DETERMINING FORMATION FILTERING PARAMETERS USING PRESSURE STABILIZATION CURVES AND ANALYSIS OF PRODUCTION UNDER DIFFERENT GEOLOGICAL-PHYSICAL CONDITIONS

    by I.N. Ponomareva, Perm National Research Polytechnic University, V.I. Galkin, D.A. Martyushev, K.A. Chernyi, S.V. Galkin, I.A. Chernykh, Llc Lukoil–Perm

    Одним из основных методов определения проницаемости коллектора в процессе разработки месторождений углеводородов являются гидродинамические исследования скважин. Однако их масштабное проведение зачастую затруднено по причинам технологического и экономического характера. В этой связи в настоящее время получили развитие методы определения фильтрационных параметров, не требующие продолжительной остановки скважин, например метод стабилизации давления и метод анализа добычи. Данные методы получили широкое распространение во многих нефтедобывающих регионах, в том числе в Пермском крае. Имеющийся накопленный опыт данных исследований обусловливает необходимость оценки достоверности демонстрируемых результатов, чему посвящена настоящая статья. Для решения поставленной задачи использованы данные по скважинам, на которых проведены исследования методами восстановления и стабилизации давления, а также имеются регулярные измерения показателей эксплуатации (дебита, забойного давления). Для оценки достоверности определения проницаемости каждым из, по сути, косвенных методов использованы инструменты математической...


  • Methodology for estimating downhole pressure using multivariate model

    by V.I. Galkin, I.N. Ponomareva, I.A. Chernykh, E.V. Filippov, Rf Lukoil-Perm Llc, G.N. Chumakov