Yi Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yi Tang has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Chuan Liu
School of Information Science and Engineering, Ningbo University, Ningbo 315211, China
3 shared publications Ahmed Rifaat Hamad
Electric Department Institution of Technology Middle Technical University Baghdad Iraq
1 shared publicationAmmar Al‐Adhami
Electronic Computer Center Al‐Karkh University of Science Baghdad Iraq
1 shared publication- Bal Singh Virdee
London Metropolitan University
1 shared publication - Chengcheng Yu
School of Electromechanical and Automotive Engineering, Yantai University, Yantai 264005, China
1 shared publication Dion Mariyanayagam
Center for Communications Technology London Metropolitan University London UK
1 shared publication
Latest Publications
- Open Access
Pattern Synthesis for Uniform Linear and Concentric Elliptical Antenna Arrays Using Kepler Optimization Algorithm
In this paper, a pattern synthesis method of uniform linear and concentric elliptical antenna arrays using the Kepler optimization algorithm (KOA) is proposed. The KOA, which utilizes Kepler’s laws to predict the position and velocity of planets at arbitrary times, is first applied to deal with the optimization problems of linear and elliptical antenna arrays. Radiation patterns with high gain and low sidelobe levels (SLLs) are synthesized by optimizing the critical parameters (amplitude, phase, and rotation) of the linear arrays. Moreover, a concentric elliptical array is designed to demonstrate the capability of the KOA framework to solve complex problems and achieve the desired performance. In order to accurately consider mutual coupling between the elements, the full-wave method of moments (MoM) is used to calculate the radiation characteristics of the arrays in the optimization method. The effectiveness of the proposed method is proved by four typical examples. The results show that, compared with the butterfly optimization algorithm (BOA), Harris hawks optimization (HHO), and crayfish optimization algorithm (COA), the proposed method possesses high gain and SLL suppression capabilities, which makes it suitable for various array types.
Open AccessPattern Synthesis for Uniform Linear and Concentric Elliptical Antenna Arrays Using Kepler Optimization Algorithm
In this paper, a pattern synthesis method of uniform linear and concentric elliptical antenna arrays using the Kepler optimization algorithm (KOA) is proposed. The KOA, which utilizes Kepler’s laws to predict the position and velocity of planets at arbitrary times, is first applied to deal with the optimization problems of linear and elliptical antenna arrays. Radiation patterns with high gain and low sidelobe levels (SLLs) are synthesized by optimizing the critical parameters (amplitude, phase, and rotation) of the linear arrays. Moreover, a concentric elliptical array is designed to demonstrate the capability of the KOA framework to solve complex problems and achieve the desired performance. In order to accurately consider mutual coupling between the elements, the full-wave method of moments (MoM) is used to calculate the radiation characteristics of the arrays in the optimization method. The effectiveness of the proposed method is proved by four typical examples. The results show that, compared with the butterfly optimization algorithm (BOA), Harris hawks optimization (HHO), and crayfish optimization algorithm (COA), the proposed method possesses high gain and SLL suppression capabilities, which makes it suitable for various array types.
- 30 May 2025
- Published by American Geophysical Union (AGU) in Radio Science
- Vol. 60 (6)
Rectenna Design Optimized by Binary Genetic Algorithm for Hybrid Energy Harvesting Applications Across 5G Sub‐6 GHz Band
This paper presents a novel rectenna design for hybrid energy harvesting, optimized using a binary genetic algorithm (BGA) with binary coding to improve geometry, impedance matching, and radiation efficiency. The fabricated rectenna achieves reflection coefficients below −40 dB at 2.45 and 5.8 GHz, demonstrating excellent impedance matching. A commercial rectifier (Powercast P21XXCSR‐EVB), employing a voltage doubler topology and Schottky diodes (Skyworks SMS7630 and Avago HSMS 285B), is integrated for RF‐to‐DC conversion. Peak efficiencies of 90% at 2.45 GHz and 52% at 5.8 GHz are recorded at 11 dBm input power, while efficiencies above 80% and 50%, respectively, are maintained at 0 dBm. The rectifier also exhibits wide impedance bandwidths, with reflection coefficients of −23 dB and −18 dB at the respective frequencies. Outdoor testing yields DC output voltages of 92.6 mV (2.45 GHz) and 64 mV (5.8 GHz). The system's efficiency and adaptability under variable conditions make it ideal for low‐power applications such as wireless sensor networks, Internet of Things devices, and remote monitoring. Its robust performance across environments highlights its potential for autonomous energy harvesting in 5G and sub‐6 GHz networks.
- 30 May 2025
- Published by American Geophysical Union (AGU) in Radio Science
- Vol. 60 (6)
Rectenna Design Optimized by Binary Genetic Algorithm for Hybrid Energy Harvesting Applications Across 5G Sub‐6 GHz Band
This paper presents a novel rectenna design for hybrid energy harvesting, optimized using a binary genetic algorithm (BGA) with binary coding to improve geometry, impedance matching, and radiation efficiency. The fabricated rectenna achieves reflection coefficients below −40 dB at 2.45 and 5.8 GHz, demonstrating excellent impedance matching. A commercial rectifier (Powercast P21XXCSR‐EVB), employing a voltage doubler topology and Schottky diodes (Skyworks SMS7630 and Avago HSMS 285B), is integrated for RF‐to‐DC conversion. Peak efficiencies of 90% at 2.45 GHz and 52% at 5.8 GHz are recorded at 11 dBm input power, while efficiencies above 80% and 50%, respectively, are maintained at 0 dBm. The rectifier also exhibits wide impedance bandwidths, with reflection coefficients of −23 dB and −18 dB at the respective frequencies. Outdoor testing yields DC output voltages of 92.6 mV (2.45 GHz) and 64 mV (5.8 GHz). The system's efficiency and adaptability under variable conditions make it ideal for low‐power applications such as wireless sensor networks, Internet of Things devices, and remote monitoring. Its robust performance across environments highlights its potential for autonomous energy harvesting in 5G and sub‐6 GHz networks.
- Open Access
High-Efficiency and Ultrawideband Polarization Conversion Metasurface Based on Topology and Shape Optimizaiton Design Method
This study introduces a two-stage optimization method for designing an ultrawideband polarization conversion metasurface. By integrating topology and shape optimization techniques, the proposed method expands the design space to achieve enhanced polarization conversion bandwidth. The first stage employs genetic-algorithm-based topology optimization to establish the initial structural configuration through binary coding. Subsequently, the second stage refines the design through shape optimization by extracting and modifying the boundaries of the topology-optimized structure. The optimized design demonstrates high polarization conversion efficiency (>90%) across 4.08–14.39 GHz, yielding a relative bandwidth of 111.64%, which represents a 4.88% improvement compared to topology-only optimization. This enhancement demonstrates the effectiveness of our combined optimization method in ultrawideband polarization conversion metasurface design, offering a promising method for developing high-performance electromagnetic devices.
Open AccessHigh-Efficiency and Ultrawideband Polarization Conversion Metasurface Based on Topology and Shape Optimizaiton Design Method
This study introduces a two-stage optimization method for designing an ultrawideband polarization conversion metasurface. By integrating topology and shape optimization techniques, the proposed method expands the design space to achieve enhanced polarization conversion bandwidth. The first stage employs genetic-algorithm-based topology optimization to establish the initial structural configuration through binary coding. Subsequently, the second stage refines the design through shape optimization by extracting and modifying the boundaries of the topology-optimized structure. The optimized design demonstrates high polarization conversion efficiency (>90%) across 4.08–14.39 GHz, yielding a relative bandwidth of 111.64%, which represents a 4.88% improvement compared to topology-only optimization. This enhancement demonstrates the effectiveness of our combined optimization method in ultrawideband polarization conversion metasurface design, offering a promising method for developing high-performance electromagnetic devices.
- 23 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (10) , 3212-3216
Design of a Single-Layer Ultrawideband Cross-Polarization Conversion Metasurface With High Efficiency
This paper presents a metasurface for polarization conversion utilizing a quadruple L-shaped structure, and only has a single layer. The metasurface achieves an ultrawide bandwidth, spanning from 5.69 to 14.82 GHz, while maintaining a high polarization conversion efficiency exceeding 90%. The extensive bandwidth can be attributed to the generation of multiple resonances within the quadruple L-shaped unit cell. Surface current distributions are further analyzed to reveal to physical mechanism governing the wide bandwidth in the design. Furthermore, the designed structure exhibits robust performance under oblique incidence, and the average polarization conversion efficiencypersistsat80%,even when the incident angle extendsto 40°. As a validation, a prototype is manufactured, measured, and the experimental findings demonstrate a satisfactory alignment with the simulated outcomes. Compared with previous designed polarization conversion metasurfaces, due to its simplicity in fabrication and no-manual-assembly design features, the proposed metasurface will be more suitable for practical wideband polarization conversion applications
- 23 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (10) , 3212-3216
Design of a Single-Layer Ultrawideband Cross-Polarization Conversion Metasurface With High Efficiency
This paper presents a metasurface for polarization conversion utilizing a quadruple L-shaped structure, and only has a single layer. The metasurface achieves an ultrawide bandwidth, spanning from 5.69 to 14.82 GHz, while maintaining a high polarization conversion efficiency exceeding 90%. The extensive bandwidth can be attributed to the generation of multiple resonances within the quadruple L-shaped unit cell. Surface current distributions are further analyzed to reveal to physical mechanism governing the wide bandwidth in the design. Furthermore, the designed structure exhibits robust performance under oblique incidence, and the average polarization conversion efficiencypersistsat80%,even when the incident angle extendsto 40°. As a validation, a prototype is manufactured, measured, and the experimental findings demonstrate a satisfactory alignment with the simulated outcomes. Compared with previous designed polarization conversion metasurfaces, due to its simplicity in fabrication and no-manual-assembly design features, the proposed metasurface will be more suitable for practical wideband polarization conversion applications
- Open Access
Prediction of the Remaining Useful Life of Lithium-Ion Batteries Based on the 1D CNN-BLSTM Neural Network
Lithium-ion batteries are currently widely employed in a variety of applications. Precise estimation of the remaining useful life (RUL) of lithium-ion batteries holds significant function in intelligent battery management systems (BMS). Therefore, in order to increase the fidelity and stabilization of predicting the RUL of lithium-ion batteries, in this paper, an innovative strategy for RUL prediction is proposed by integrating a one-dimensional convolutional neural network (1D CNN) and a bilayer long short-term memory (BLSTM) neural network. Feature extraction is carried out through the input capacity data of the model using 1D CNN, and these deep features are used as the input of the BLSTM. The memory function of the BLSTM is applied to retain key information in the database and to better understand the coupling relationship among consecutive time series data along the time axis, thereby effectively predicting the RUL trends of lithium-ion batteries. Two different types of lithium-ion battery datasets from NASA and CALCE were used to verify the effectiveness of the proposed method. The results show that the proposed method achieves higher prediction accuracy, demonstrates stronger generalization capabilities, and effectively reduces prediction errors compared to other methods.
Open AccessPrediction of the Remaining Useful Life of Lithium-Ion Batteries Based on the 1D CNN-BLSTM Neural Network
Lithium-ion batteries are currently widely employed in a variety of applications. Precise estimation of the remaining useful life (RUL) of lithium-ion batteries holds significant function in intelligent battery management systems (BMS). Therefore, in order to increase the fidelity and stabilization of predicting the RUL of lithium-ion batteries, in this paper, an innovative strategy for RUL prediction is proposed by integrating a one-dimensional convolutional neural network (1D CNN) and a bilayer long short-term memory (BLSTM) neural network. Feature extraction is carried out through the input capacity data of the model using 1D CNN, and these deep features are used as the input of the BLSTM. The memory function of the BLSTM is applied to retain key information in the database and to better understand the coupling relationship among consecutive time series data along the time axis, thereby effectively predicting the RUL trends of lithium-ion batteries. Two different types of lithium-ion battery datasets from NASA and CALCE were used to verify the effectiveness of the proposed method. The results show that the proposed method achieves higher prediction accuracy, demonstrates stronger generalization capabilities, and effectively reduces prediction errors compared to other methods.
- 2 January 2022
- Published by Taylor & Francis in International Journal of Electronics Letters
- Vol. 11 (1) , 80-88
A non-uniform strip-array decoupling structure of the MIMO antenna-arrays for the DSRC application
In this paper, a non-uniform strip-array decoupling structure (SADS) of the MIMO antenna-arrays for the dedicated short-range communication (DSRC) applications in intelligent transportation systems (ITS) is presented. The SADS is composed of metal strips with non-uniform longitudinal layout, which has a simple strip-array geometry, low design and fabrication complexity, and easy to be applied to the design domain without destroying the original antenna-array. The design of the strip thickness, strip-array layout and number of strips is realised by the proposed simple and effective optimisation method. The mutual coupling between the elements can be effectively suppressed to less than −32 dB by the proposed structure in the required bandwidth (5.795 GHz~5.815 GHz). The results show that, compared with the no-strip and uniform SADS, the non-uniform SADS can improve the maximum mutual coupling reduction by 23 dB and 13 dB, respectively. Both the simulated and measured results verify the effectiveness of the proposed SADS, which makes it very suitable for the large-scale MIMO antenna-arrays.
- 2 January 2022
- Published by Taylor & Francis in International Journal of Electronics Letters
- Vol. 11 (1) , 80-88
A non-uniform strip-array decoupling structure of the MIMO antenna-arrays for the DSRC application
In this paper, a non-uniform strip-array decoupling structure (SADS) of the MIMO antenna-arrays for the dedicated short-range communication (DSRC) applications in intelligent transportation systems (ITS) is presented. The SADS is composed of metal strips with non-uniform longitudinal layout, which has a simple strip-array geometry, low design and fabrication complexity, and easy to be applied to the design domain without destroying the original antenna-array. The design of the strip thickness, strip-array layout and number of strips is realised by the proposed simple and effective optimisation method. The mutual coupling between the elements can be effectively suppressed to less than −32 dB by the proposed structure in the required bandwidth (5.795 GHz~5.815 GHz). The results show that, compared with the no-strip and uniform SADS, the non-uniform SADS can improve the maximum mutual coupling reduction by 23 dB and 13 dB, respectively. Both the simulated and measured results verify the effectiveness of the proposed SADS, which makes it very suitable for the large-scale MIMO antenna-arrays.
- 28 September 2021
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 14 (8) , 1-7
Gradient-based optimization method for interference suppression of linear arrays by the amplitude-only and phase-only control
This paper presents a gradient-based optimization method for interference suppression of linear arrays by controlling the electrical parameters of each array element, including the amplitude-only and phase-only. Gradient-based optimization algorithm (GOA), as an efficient optimization algorithm, is applied to the optimization problem of the anti-interference arrays that is generally solved by the evolutionary algorithms. The goal of this method is to maximize the main beam gain while minimizing the peak sidelobe level (PSLL) together with the null constraint. To control the nulls precisely and synthesize the radiation pattern accurately, the full-wave method of moments is used to consider the mutual coupling among the array elements rigorously. The searching efficiency is improved greatly because the gradient (sensitivity) information is used in the algorithm for solving the optimization problem. The sensitivities of the design objective and the constraint function with respect to the design variables are analytically derived and the optimization problems are solved by using GOA. The results of the GOA can produce the desired null at the specific positions, minimize the PSLL, and greatly shorten the computation time compared with the often-used non-gradient method such as genetic algorithm and cuckoo search algorithm.
- 28 September 2021
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 14 (8) , 1-7
Gradient-based optimization method for interference suppression of linear arrays by the amplitude-only and phase-only control
This paper presents a gradient-based optimization method for interference suppression of linear arrays by controlling the electrical parameters of each array element, including the amplitude-only and phase-only. Gradient-based optimization algorithm (GOA), as an efficient optimization algorithm, is applied to the optimization problem of the anti-interference arrays that is generally solved by the evolutionary algorithms. The goal of this method is to maximize the main beam gain while minimizing the peak sidelobe level (PSLL) together with the null constraint. To control the nulls precisely and synthesize the radiation pattern accurately, the full-wave method of moments is used to consider the mutual coupling among the array elements rigorously. The searching efficiency is improved greatly because the gradient (sensitivity) information is used in the algorithm for solving the optimization problem. The sensitivities of the design objective and the constraint function with respect to the design variables are analytically derived and the optimization problems are solved by using GOA. The results of the GOA can produce the desired null at the specific positions, minimize the PSLL, and greatly shorten the computation time compared with the often-used non-gradient method such as genetic algorithm and cuckoo search algorithm.