Kelly Dwyer
Research Subjects
Kelly Dwyer has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Gary Walsh
Chemical Sciences Department, University of Limerick, Castletroy, Ireland
3 shared publications Darragh Gaffney
MBio Labs at Monaghan Mushrooms Ireland Ultd, Tyholland, Ireland
2 shared publicationsEibhilin McGleenan
MBio Labs at Monaghan Mushrooms Ireland Ultd, Tyholland, Ireland
2 shared publicationsEmma Tighe
MBio Labs at Monaghan Mushrooms Ireland Ultd, Tyholland, Ireland
2 shared publicationsIan S. Bentley
MBio Labs at Monaghan Mushrooms Ireland Ultd, Tyholland, Ireland
2 shared publications- Alexander Sandahl
EnZync Center for Enzymatic Deconstruction of Thermoset Plastics
1 shared publication
Latest Publications
- Open Access
Expanding the Enzymatic Landscape for Polyurethane Degradation of Novel Bacterial Urethanases
Polyurethanes (PURs) represent a significant challenge in plastic waste management due to their chemical resilience and limited recycling options. In this study, we report the identification and characterization of five novel bacterial urethanases, expanding the enzymatic repertoire for targeted PUR depolymerization. These enzymes demonstrated carbamate-cleaving activity optimally under alkaline conditions, maintaining stability across a pH range of 7 to 10 and varying thermal and solvent tolerances. Two candidate enzymes, u17 u15 collectively exhibited high activity, catalytic efficiency, and thermostability, establishing a strong foundation for further optimization. Among them, u15 emerged as particularly notable for its catalytic efficiency on the carbamate model substrate di-urethane ethylene methylenedianiline, DUE-MDA, with a k cat /K M of 51.8 ± 0.1 (s -1 mM - 1 ). and this motivated its selection for detailed structural analysis. High-resolution crystallography of u15 revealed key active-site architecture, including the conserved amidase signature catalytic triad and flexible loop regions that influence substrate binding and specificity. Molecular docking and molecular dynamics simulations further elucidated substrate binding determinants of u15 during urethane bond hydrolysis. Docking of DUE-MDA revealed two distinct substrate orientations (Pose A and Pose B) differing in the positioning of the carbamate group relative to Ser177. Pose A was more stable and catalytically competent, maintaining the substrate within the oxyanion hole and sustaining optimal geometry for nucleophilic attack by Ser177. Comparable behavior was observed for the partially hydrolyzed intermediate mono-urethane ethylene methylenedianiline, MUE-MDA, indicating a conserved binding mode across substrates. To further assess enzymatic performance on a realistic industrial material, the panel was then tested on a generic flexible foam substrate derived from 2,4- and 2,6-toluene diisocyanate (TDA), where u15 and u17 emerged as the most active candidates. Collectively, we benchmark the structural framework presented by enzymes in the amidase signature family as a strong foundation for further optimization aiming at advancing sustainable and scalable biocatalytic recycling of polyurethanes.
Open AccessExpanding the Enzymatic Landscape for Polyurethane Degradation of Novel Bacterial Urethanases
Polyurethanes (PURs) represent a significant challenge in plastic waste management due to their chemical resilience and limited recycling options. In this study, we report the identification and characterization of five novel bacterial urethanases, expanding the enzymatic repertoire for targeted PUR depolymerization. These enzymes demonstrated carbamate-cleaving activity optimally under alkaline conditions, maintaining stability across a pH range of 7 to 10 and varying thermal and solvent tolerances. Two candidate enzymes, u17 u15 collectively exhibited high activity, catalytic efficiency, and thermostability, establishing a strong foundation for further optimization. Among them, u15 emerged as particularly notable for its catalytic efficiency on the carbamate model substrate di-urethane ethylene methylenedianiline, DUE-MDA, with a k cat /K M of 51.8 ± 0.1 (s -1 mM - 1 ). and this motivated its selection for detailed structural analysis. High-resolution crystallography of u15 revealed key active-site architecture, including the conserved amidase signature catalytic triad and flexible loop regions that influence substrate binding and specificity. Molecular docking and molecular dynamics simulations further elucidated substrate binding determinants of u15 during urethane bond hydrolysis. Docking of DUE-MDA revealed two distinct substrate orientations (Pose A and Pose B) differing in the positioning of the carbamate group relative to Ser177. Pose A was more stable and catalytically competent, maintaining the substrate within the oxyanion hole and sustaining optimal geometry for nucleophilic attack by Ser177. Comparable behavior was observed for the partially hydrolyzed intermediate mono-urethane ethylene methylenedianiline, MUE-MDA, indicating a conserved binding mode across substrates. To further assess enzymatic performance on a realistic industrial material, the panel was then tested on a generic flexible foam substrate derived from 2,4- and 2,6-toluene diisocyanate (TDA), where u15 and u17 emerged as the most active candidates. Collectively, we benchmark the structural framework presented by enzymes in the amidase signature family as a strong foundation for further optimization aiming at advancing sustainable and scalable biocatalytic recycling of polyurethanes.
- Open Access
- 9 August 2024
- Published by Wiley in Biotechnology Journal
- Vol. 19 (8) , 2400245
Truncation of a novel C‐terminal domain of a β‐glucanase improves its thermal stability and specific activity
Enzymes that degrade β‐glucan play important roles in various industries, including those related to brewing, animal feed, and health care. Csph16A, an endo‐β‐1,3(4)‐glucanase encoded by a gene from the halotolerant, xerotolerant, and radiotrophic black fungus Cladosporium sphaerospermum, was cloned and expressed in Pichia pastoris. Two isoforms (Csph16A.1 and Csph16A.2) are produced, arising from differential glycosylation. The proteins were predicted to contain a catalytic Lam16A domain, along with a C‐terminal domain (CTD) of unknown function which exhibits minimal secondary structure. Employing PCR‐mediated gene truncation, the CTD of Csph16A was excised to assess its functional impact on the enzyme and determine potential alterations in biotechnologically relevant characteristics. The truncated mutant, Csph16A‐ΔC, exhibited significantly enhanced thermal stability at 50°C, with D‐values 14.8 and 23.5 times greater than those of Csph16A.1 and Csph16A.2, respectively. Moreover, Csph16A‐ΔC demonstrated a 20%–25% increase in halotolerance at 1.25 and 1.5 M NaCl, respectively, compared to the full‐length enzymes. Notably, specific activity against cereal β‐glucan, lichenan, and curdlan was increased by up to 238%. This study represents the first characterization of a glucanase from the stress‐tolerant fungus C. sphaerospermum and the first report of a halotolerant and engineered endo‐β‐1,3(4)‐glucanase. Additionally, it sheds light on a group of endo‐β‐1,3(4)‐glucanases from Antarctic rock‐inhabiting black fungi harboring a Lam16A catalytic domain and a novel CTD of unknown function.
- 9 August 2024
- Published by Wiley in Biotechnology Journal
- Vol. 19 (8) , 2400245
Open AccessTruncation of a novel C‐terminal domain of a β‐glucanase improves its thermal stability and specific activity
Enzymes that degrade β‐glucan play important roles in various industries, including those related to brewing, animal feed, and health care. Csph16A, an endo‐β‐1,3(4)‐glucanase encoded by a gene from the halotolerant, xerotolerant, and radiotrophic black fungus Cladosporium sphaerospermum, was cloned and expressed in Pichia pastoris. Two isoforms (Csph16A.1 and Csph16A.2) are produced, arising from differential glycosylation. The proteins were predicted to contain a catalytic Lam16A domain, along with a C‐terminal domain (CTD) of unknown function which exhibits minimal secondary structure. Employing PCR‐mediated gene truncation, the CTD of Csph16A was excised to assess its functional impact on the enzyme and determine potential alterations in biotechnologically relevant characteristics. The truncated mutant, Csph16A‐ΔC, exhibited significantly enhanced thermal stability at 50°C, with D‐values 14.8 and 23.5 times greater than those of Csph16A.1 and Csph16A.2, respectively. Moreover, Csph16A‐ΔC demonstrated a 20%–25% increase in halotolerance at 1.25 and 1.5 M NaCl, respectively, compared to the full‐length enzymes. Notably, specific activity against cereal β‐glucan, lichenan, and curdlan was increased by up to 238%. This study represents the first characterization of a glucanase from the stress‐tolerant fungus C. sphaerospermum and the first report of a halotolerant and engineered endo‐β‐1,3(4)‐glucanase. Additionally, it sheds light on a group of endo‐β‐1,3(4)‐glucanases from Antarctic rock‐inhabiting black fungi harboring a Lam16A catalytic domain and a novel CTD of unknown function.
- 18 April 2023
- Published by Springer Nature in Extremophiles
- Vol. 27 (2) , 1-17
Recombinant production, characterization and industrial application testing of a novel acidic exo/endo-chitinase from Rasamsonia emersonii
An acid-active exo/endo-chitinase; comprising a GH18 catalytic domain and substrate insertion domain; originating from the thermophilic filamentous fungus Rasamsonia emersonii, was expressed in Pichia pastoris. In silico analysis including phylogenetic analysis, and recombinant production, purification, biochemical characterisation, and industrial application testing, was carried out. The expressed protein was identified by SDS-PAGE as a smear from 56.3 to 125.1 kDa, which sharpens into bands at 46.0 kDa, 48.4 kDa and a smear above 60 kDa when treated with PNGase F. The acid-active chitinase was primarily a chitobiosidase but displayed some endo-chitinase and acetyl-glucosamidase activity. The enzyme was optimally active at 50 °C, and markedly low pH of 2.8. As far as the authors are aware, this is the lowest pH optima reported for any fungal chitinase. The acid-active chitinase likely plays a role in chitin degradation for cell uptake in its native environment, perhaps in conjunction with a chitin deacetylase. Comparative studies with other R. emersonii chitinases indicate that they may play a synergistic role in this. The acid-active chitinase displayed some efficacy against non-treated substrates; fungal chitin and chitin from shrimp. Thus, it may be suited to industrial chitin hydrolysis reactions for extraction of glucosamine and chitobiose at low pH.
- 18 April 2023
- Published by Springer Nature in Extremophiles
- Vol. 27 (2) , 1-17
Recombinant production, characterization and industrial application testing of a novel acidic exo/endo-chitinase from Rasamsonia emersonii
An acid-active exo/endo-chitinase; comprising a GH18 catalytic domain and substrate insertion domain; originating from the thermophilic filamentous fungus Rasamsonia emersonii, was expressed in Pichia pastoris. In silico analysis including phylogenetic analysis, and recombinant production, purification, biochemical characterisation, and industrial application testing, was carried out. The expressed protein was identified by SDS-PAGE as a smear from 56.3 to 125.1 kDa, which sharpens into bands at 46.0 kDa, 48.4 kDa and a smear above 60 kDa when treated with PNGase F. The acid-active chitinase was primarily a chitobiosidase but displayed some endo-chitinase and acetyl-glucosamidase activity. The enzyme was optimally active at 50 °C, and markedly low pH of 2.8. As far as the authors are aware, this is the lowest pH optima reported for any fungal chitinase. The acid-active chitinase likely plays a role in chitin degradation for cell uptake in its native environment, perhaps in conjunction with a chitin deacetylase. Comparative studies with other R. emersonii chitinases indicate that they may play a synergistic role in this. The acid-active chitinase displayed some efficacy against non-treated substrates; fungal chitin and chitin from shrimp. Thus, it may be suited to industrial chitin hydrolysis reactions for extraction of glucosamine and chitobiose at low pH.
- 28 September 2021
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 105 (20) , 7769-7783
Recombinant production and characterisation of two chitinases from Rasamsonia emersonii, and assessment of their potential industrial applicability
Rasamsonia emersonii (previously Talaromyces emersonii) is a thermophilic filamentous fungus displaying optimum growth at 45 °C. It has a history of use in commercial food enzyme production. Its unfractionated chitinolytic secretome was partially characterised in the early 1990s; however, no individual chitinase from this source has been described in literature previously. This study describes two GH18 chitinases originating from the R. emersonii genome, expressed in the methylotrophic yeast P. pastoris. Chit1 comprises of a GH18 catalytic domain and Chit2 comprises of a GH18 catalytic domain and a chitin-binding motif at the C-terminal. The chitinases were expressed as glycoproteins. The apparent molecular weight of Chit1 was 35.8–42.1 kDa with a smearing tail associated with glyco-sidechains visible up to 72.2 kDa. This became two bands of 30.8 and 29.0 kDa upon de-glycosylation. The apparent molecular weight of Chit2 was 50.4 kDa, reducing to 48.2 kDa upon de-glycosylation. Both chitinases displayed endo-chitinase and chitobiosidase activity, temperature optima of 50–55 °C and low pH optima (pH 4.5 or lower); Chit1 displayed a pH optimum of 3.5, retaining > 60% maximum activity at pH 2.2, a pH range lower than most enzymes of fungal origin. Chit2 displayed the highest chitin-degrading ability at 3456 µmol/mg on 4-NP-triacetylchitotriose, but lost activity faster than Chit1, which displayed 403 µmol/mg on the same substrate. The predicted D values (time required to reduce the enzyme activity to 10% of its original value at 50 °C) were 19.2 and 2.3 days for Chit1 and Chit2, respectively. Thus, Chit1 can be considered one of few hyperthermostable chitinase enzymes described in literature to date. Their physicochemical properties render these chitinases likely suitable for shrimp chitin processing including one-step chitin hydrolysis and alternative sustainable protein processing and the attractive emerging application of mushroom food waste valorisation. Key points • Two GH18 chitinases originating from the industrially relevant thermophilic fungus R. emersonii were cloned and expressed in P. pastoris. • The purified recombinant chitinases showed low pH and high temperature optima and appreciable thermostability at industrially relevant temperatures. • The chitinases displayed characteristics that indicate their likely suitability to several industrial applications including sustainable alternative protein processing, food waste valorisation of commercial mushroom production and one-step shrimp chitin processing.
- 28 September 2021
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 105 (20) , 7769-7783
Recombinant production and characterisation of two chitinases from Rasamsonia emersonii, and assessment of their potential industrial applicability
Rasamsonia emersonii (previously Talaromyces emersonii) is a thermophilic filamentous fungus displaying optimum growth at 45 °C. It has a history of use in commercial food enzyme production. Its unfractionated chitinolytic secretome was partially characterised in the early 1990s; however, no individual chitinase from this source has been described in literature previously. This study describes two GH18 chitinases originating from the R. emersonii genome, expressed in the methylotrophic yeast P. pastoris. Chit1 comprises of a GH18 catalytic domain and Chit2 comprises of a GH18 catalytic domain and a chitin-binding motif at the C-terminal. The chitinases were expressed as glycoproteins. The apparent molecular weight of Chit1 was 35.8–42.1 kDa with a smearing tail associated with glyco-sidechains visible up to 72.2 kDa. This became two bands of 30.8 and 29.0 kDa upon de-glycosylation. The apparent molecular weight of Chit2 was 50.4 kDa, reducing to 48.2 kDa upon de-glycosylation. Both chitinases displayed endo-chitinase and chitobiosidase activity, temperature optima of 50–55 °C and low pH optima (pH 4.5 or lower); Chit1 displayed a pH optimum of 3.5, retaining > 60% maximum activity at pH 2.2, a pH range lower than most enzymes of fungal origin. Chit2 displayed the highest chitin-degrading ability at 3456 µmol/mg on 4-NP-triacetylchitotriose, but lost activity faster than Chit1, which displayed 403 µmol/mg on the same substrate. The predicted D values (time required to reduce the enzyme activity to 10% of its original value at 50 °C) were 19.2 and 2.3 days for Chit1 and Chit2, respectively. Thus, Chit1 can be considered one of few hyperthermostable chitinase enzymes described in literature to date. Their physicochemical properties render these chitinases likely suitable for shrimp chitin processing including one-step chitin hydrolysis and alternative sustainable protein processing and the attractive emerging application of mushroom food waste valorisation. Key points • Two GH18 chitinases originating from the industrially relevant thermophilic fungus R. emersonii were cloned and expressed in P. pastoris. • The purified recombinant chitinases showed low pH and high temperature optima and appreciable thermostability at industrially relevant temperatures. • The chitinases displayed characteristics that indicate their likely suitability to several industrial applications including sustainable alternative protein processing, food waste valorisation of commercial mushroom production and one-step shrimp chitin processing.