GKGouri Sankar Kar

Gouri Sankar Kar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gouri Sankar Kar has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fault Attack Investigation on TaOx Resistive-RAM for Cyber Secure Application

    by Ankit Kumar, Robin Degraeve, Arthur Beckers, Andrea Fantini, Ingrid Verbauwhede, Dimitri Linten, Gouri S. Kar

    Resilience against fault attacks is essential for edge devices embedding emerging memories as the memory’s integrity serves as the root of trust (RoT). In this work, simple two-terminal emerging oxide-based random access memory (Oxide RRAM) has been studied for its susceptibility to fault attacks induced into the memory state switching mechanism. We have demonstrated that an Oxide RRAM cell ON state is resilient against laser, electromagnetic (EM), and reading-stress fault attacks, while the OFF state is vulnerable against all the above-mentioned fault attacks. However, precise control of the applied power is essential to induce a transient fault in the OFF state. Fault attacks affect the memory cell periphery significantly more than individual memory cells. These results suggest that Oxide RRAM can only make a secure system if the countermeasures are built across the OFF states.


  • MFA-MTJ Model: Magnetic-Field-Aware Compact Model of pMTJ for Robust STT-MRAM Design

    by Lizhou Wu, Siddharth Rao, Mottaqiallah Taouil, Erik Jan Marinissen, Gouri Sankar Kar, Said Hamdioui

    The popularity of perpendicular magnetic tunnel junction (pMTJ)-based spin-transfer torque magnetic random access memories (STT-MRAMs) is growing very fast. The performance of such memories is very sensitive to magnetic fields, including both internal and external ones. This article presents a magnetic-field-aware compact model of pMTJ, named the MFA-magnetic tunnel junction (MTJ) model, for magnetic/electrical co-simulation of MTJ/CMOS circuits. Magnetic measurement data of MTJ devices, with diameters ranging from 35 to 175 nm, are used to calibrate an in-house magnetic coupling model. This model is subsequently integrated into our developed compact pMTJ model, which is implemented in Verilog-A. The superiority of the proposed MFA-MTJ model for device/circuit co-design of STT-MRAM is demonstrated by simulating a single pMTJ as well as STT-MRAM full circuits. The design space is explored under PVT variations and various configurations of magnetic fields.


  • Characterization, Modeling, and Test of Intermediate State Defects in STT-MRAMs

    by Lizhou Wu, Siddharth Rao, Mottaqiallah Taouil, Erik Jan Marinissen, Gouri Sankar Kar, Said Hamdioui

    Understanding defects in magnetic tunnel junctions (MTJs) and their faulty behaviors are paramount for developing high-quality test solutions for STT-MRAM. This article applies the advanced device-aware test to intermediate (IM) state defects in MTJ devices based on silicon measurements and circuit simulations. An IM state manifests itself as an abnormal third resistive state, which differs from the two bi-stable states of MTJ. We performed silicon measurements on MTJ devices with diameter ranging from 60 nm to 120 nm; the results show that the occurrence probability of IM state strongly depends on the switching direction, device size, and bias voltage. We demonstrate that the conventional resistor-based fault modeling and test approach fails to appropriately model and test such a defect. Therefore, device-aware test is applied. We first physically model the defect and incorporate it into a Verilog-A MTJ compact model and calibrate it with silicon data. Thereafter, this model is used for a systematic fault analysis based on circuit simulations to obtain accurate and realistic faults in a pre-defined fault space. Our simulation results show that an IM state defect leads to intermittent write transition faults. Finally, we propose and implement a device-aware test solution to detect the IM state defect.


  • Open Access

    A Systematic Assessment of W-Doped CoFeB Single Free Layers for Low Power STT-MRAM Applications

    by Siddharth Rao, Sebastien Couet, Simon Van Beek, Shreya Kundu, Shamin Houshmand Sharifi, Nico Jossart, Gouri Sankar Kar

    Spin-transfer torque magnetoresistive random access memory (STT-MRAM) technology is considered to be the most promising nonvolatile memory (NVM) solution for high-speed and low power applications. Dual MgO-based composite free layers (FL) have driven the development of STT-MRAMs over the past decade, achieving data retention of 10 years at the cost of higher write power consumption. In addition, the need for tunnel magnetoresistance (TMR)-based read schemes limits the flexibility in materials beyond the typical CoFeB/MgO interfaces. In this study, we propose a novel spacerless FL stack comprised of CoFeB alloyed with heavy metals such as tungsten (W) which allows effective modulation of the magnet properties (Ms, Hk) while retaining compatibility with MgO layers. The addition of W results favours a delayed crystallization process, in turn enabling higher thermal budgets up to 180 min at 400 °C. The presence of tungsten reduces the total FL magnetization (Ms) but simultaneously increasing its temperature dependence, thus, enabling a dynamic write current reduction of ~15% at 2 ns pulse widths. Reliable operation is demonstrated with a WER of 1 ppm and endurance >1010 cycles. These results pave the way for alternative designs of STT-MRAMs for low power electronics.


  • Carbon-Based Liner for RESET Current Reduction in Self-Heating Phase- Change Memory Cells

    by Anabel De Proft, Daniele Garbin, Gabriele Luca Donadio, Hubert Hody, Thomas Witters, Kristof Lodewijks, Xavier Rottenberg, Ludovic Goux, Romain Delhougne, Gouri Sankar Kar

    The use of carbon-based (C-based) liners is investigated for RESET current reduction in self-heating, pillar-shaped phase-change memory (PCM) cells for storage class memory (SCM) technologies. The liner is inserted between the top electrode and the phase-change layer. A finite element analysis (FEA) is done to simulate the effect of this liner on the RESET current, using the melting current as a proxy. From this FEA, we see that the high resistance of the C-based liner increases the heat generation at the interface with the phase-change layer, changing the cell from being solely self-heated by the phase-change layer to a combination of the phase-change layer's self-heating and heating from the C-based liner. The simulation results are validated against experimental results from fabricated pillar cells. We show the liner reduces the melting current of the pillar cell by 60%. The effect of the thickness of the C-based liner and the phase-change layer on the melting current is quantified, showing a strong dependence on the liner thickness and a weak dependence on the phase-change layer thickness. These findings can guide the design of PCM cells with high-resistance liners between the electrode and phase-change layer for RESET current reduction.


  • Defect and Fault Modeling Framework for STT-MRAM Testing

    by Lizhou Wu, Siddharth Rao, Mottaqiallah Taouil, Guilherme Cardoso Medeiros, Moritz Fieback, Erik Jan Marinissen, Gouri Sankar Kar, Said Hamdioui

    STT-MRAM mass production is around the corner as major foundries worldwide invest heavily on its commercialization. To ensure high-quality STT-MRAM products, effective yet cost-efficient test solutions are of great importance. This paper presents a systematic device-aware defect and fault modeling framework for STT-MRAM to derive accurate fault models which reflect the physical defects appropriately, and thereafter optimal and high-quality test solutions. An overview and classification of manufacturing defects in STT-MRAMs are provided with an emphasis on those related to the fabrication of magnetic tunnel junction (MTJ) devices, i.e., the data-storing elements. Defects in MTJ devices need to be modeled by adjusting the affected technology parameters and subsequent electrical parameters to fully capture the defect impact on both the device's electrical and magnetic properties, whereas defects in interconnects can be modeled as linear resistors. In addition, a complete single-cell fault space and nomenclature are defined, and a systematic fault analysis methodology is proposed. To demonstrate the use of the proposed framework, resistive defects in interconnect and pinhole defects in MTJ devices are analyzed for a single 1T-1MTJ memory cell. Test solutions for detecting these defects are also discussed.


  • Effect of Tantalum Spacer Thickness and Deposition Conditions on the Properties of MgO/CoFeB/Ta/CoFeB/MgO Free Layers

    by Thibaut Devolder, Sebastien Couet, Johan Swerts, Sofie Mertens, Siddharth Rao, Gouri Sankar Kar

    To get stable perpendicularly magnetized tunnel junctions at small device dimensions, composite free layers that comprise two MgO/FeCoB interfaces as sources of interface anisotropy are generally used. Proper cristallisation and annealing robustness is typically ensured by the insertion of a spacer layer of the early transition metal series within the FeCoB layer. We study the influence of the spacer thickness and growth condition on the switching metrics of tunnel junctions thermally annealed at 400°C for the case of 1-4 Å Ta spacers. Thick Ta spacer results in a large anisotropies indicative of a better defined top FeCoB/MgO interface, but this is achieved at the systematic expense of a stronger damping. For the best anisotropy-damping compromise, junctions of diameter 22 nm can still be stable and spin-torque switched. Coercivity and inhomogeneous linewidth broadening, likely arising from roughness at the FeCoB/Ta interface, can be reduced if a sacrificial Mg layer is inserted before the Ta spacer deposition.