Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anureet Kaur has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Alternative Natural Rubber Cross-Linking Utilizing a Disulfide-Containing Bismaleimide

    by Anureet Kaur, Maria Tucker, Keizo Akutagawa, Biqiong Chen, James J. C. Busfield

    This study explores a disulfide-selective cross-linking strategy for natural rubber (NR) to formulate elastomeric materials with engineering-relevant mechanical properties. A disulfide-containing bismaleimide (BIS) cross-linker was synthesized from cystamine and maleic anhydride and compounded with NR. Three formulations were prepared: control (no inhibitor), CuCl2-based, and copper(II) methacrylate (CuMA) based compounds, with BIS concentrations ranging from 3.55 to 8.88 phr. Rheological and mechanical testing revealed that CuCl2 formulations suffered from molecular degradation, poor thermal stability, and mechanical brittleness due to oxidative reactions in the absence of antioxidants. In contrast, CuMA-based compounds exhibited intermediate molecular weights prior to curing, stable thermal behavior, and improved mechanical properties, including enhanced torque and tensile strength, indicating effective cross-linking and partial recyclability. The control formulations also performed reasonably well but did not match the mechanical strength of conventional sulfur-vulcanized NR. The results demonstrate that metal coordination, particularly with CuMA, can modulate disulfide metathesis kinetics and offer a pathway to thermally triggered network rearrangement. Overall, CuMA emerges as a promising candidate for developing high-performance, recyclable rubber materials, while CuCl2 requires further stabilization strategies. This work establishes a baseline for future recyclability studies and advances the design of dynamic covalent networks in elastomers.

  • Open Access

    Recyclable sulfur cured natural rubber with controlled disulfide metathesis

    by Anureet Kaur, Meet M. Fefar, Thomas Griggs, Keizo Akutagawa, Biqiong Chen, James J. C. Busfield

    Traditionally, sulfur-cured natural rubber compounds exhibit limited recyclability due to a significant drop in mechanical performance after reprocessing. Maintaining physical and chemical properties after recycling of a cross-linked polymer is an essential requirement for the global rubber industry to become more sustainable. Here, we demonstrate that tuning the curing process to favour a reversible cross-linked network based on disulfide and polysulfide bonds enables recyclability. We use a sulfur-based vulcanization system optimized with copper (II) methacrylate at concentrations of 2.47, 4.94, and 9.89 phr to control disulfide metathesis at low temperatures and enhance recyclability. Mechanical characterization identifies 2.47 phr as optimal for maintaining mechanical properties after initial moulding and full recovery after recycling. Additionally, we demonstrate that copper (II) methacrylate can be incorporated into existing rubber waste streams to promote recyclability.


  • Open Access

    Thiyl radical induced cis/trans isomerism in double bond containing elastomers

    by Anureet Kaur, Julien E. Gautrot, Keizo Akutagawa, Douglas Watson, Alan Bickley, James J. C. Busfield

    This report presents an evaluation of thiyl radical-induced cis/trans isomerism in double bond-containing elastomers, such as natural, polychloroprene, and polybutadiene rubbers.


  • Open Access

    Novel Crosslinking System for Poly-Chloroprene Rubber to Enable Recyclability and Introduce Self-Healing

    by Anureet Kaur, Julien E. Gautrot, Gabriel Cavalli, Douglas Watson, Alan Bickley, Keizo Akutagawa, James J. C. Busfield

    The introduction of dynamic bonds capable of mediating self-healing in a fully cross-linked polychloroprene network can only occur if the reversible moieties are carried by the cross-linker itself or within the main polymer backbone. Conventional cross-linking is not suitable for such a purpose. In the present work, a method to develop a self-healable and recyclable polychloroprene rubber is presented. Dynamic disulfide bonds are introduced as part of the structure of a crosslinker (liquid polysulfide polymer, Thiokol LP3) coupled to the polymer backbone via thermally initiated thiol-ene reaction. The curing and kinetic parameters were determined by isothermal differential scanning calorimetry and by moving die rheometer analysis; tensile testing was carried to compare the tensile strength of cured compound, healed compounds and recycled compounds, while chemical analysis was conducted by surface X-ray Photoelectron Spectroscopy. Three formulations with increasing concentrations of Thiokol LP-3 were studied (2, 4, 6 phr), reaching a maximum ultimate tensile strength of 22.4 MPa and ultimate tensile strain of 16.2 with 2 phr of Thiokol LP-3, 11.7 MPa and 10.7 strain with 4 phr and 5.6 MPa and 7.3 strain with 6 phr. The best healing efficiencies were obtained after 24 h of healing at 80 °C, increasing with the concentration of Thiokol LP-3, reaching maximum values of 4.5% 4.4% 13.4% with 2 phr, 4 phr and 6 phr, respectively, while the highest recycling efficiency was obtained with 4 phr of Thiokol LP-3, reaching 11.2%.