Guojun Dong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guojun Dong has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
Youhong Xiao
College of Power and Energy Engineering of Harbin Engineering University, 150001 Harbin, P. R. China
5 shared publications- Xuteng Zhao
College of Materials Science and Chemical Engineering, Key Laboratory of Superlight Materials and Surface Technology of Education Ministry, Harbin Engineering University, Harbin, China
4 shared publications - Lei Mao
College of Materials Science and Chemical Engineering, Key Laboratory of Superlight Materials and Surface Technology of Education Ministry, Harbin Engineering University, Harbin, China
3 shared publications Maochen Fu
College of Materials Science and Chemical Engineering, Key Laboratory of Superlight Materials and Surface Technology of Education Ministry, Harbin Engineering University, Harbin, China
3 shared publicationsRumin Li
Harbin Engineering University
2 shared publicationsShan Pian
Key Laboratory of Superlight Materials and Surface Technology of Education Ministry, College of Materials Science and Chemical Engineering of Harbin Engineering University, Harbin, 150001, China
2 shared publications
Latest Publications
- 17 March 2023
- Published by Springer Nature in Chinese Journal of Polymer Science
- Vol. 41 (8) , 1198-1205
Rapid Conversion of Perhydropolysilazane into Thin Silica Coating at Low Temperature
- 17 March 2023
- Published by Springer Nature in Chinese Journal of Polymer Science
- Vol. 41 (8) , 1198-1205
Rapid Conversion of Perhydropolysilazane into Thin Silica Coating at Low Temperature
- 1 February 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (10) , 6767-6776
Vx-Na2TiOSiO4 MWNTs: Reduction of V5+ by electronegative oxygen and doping mechanism of V4+, formation and its hydrogen uptake
- 1 February 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (10) , 6767-6776
Vx-Na2TiOSiO4 MWNTs: Reduction of V5+ by electronegative oxygen and doping mechanism of V4+, formation and its hydrogen uptake
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Vx-Na2tiosio4 Mwnts for Uranium Extraction from Seawater and Recovery from Nuclear Waste
Uranyl ion pollution is a serious environmental problem, and developing novel adsorption materials is essential for uranyl ion removal. V-doped Na 2 TiOSiO 4 multiwalled nanotubes (V x -Na 2 TiOSiO 4 MWNTs) were prepared by an effective hydrothermal process and their uranyl ion adsorption properties were investigated. The special morphology, high specific surface area, and surface potential made MWNTs an excellent adsorbent. Appropriate doping can further improve the adsorption performance of nanotubes. The saturated adsorption capacities of nanotubes in aqueous solution and simulated seawater were 593.2 and 236.9 mg/g, respectively, and can reach 684.6 and 287.0 mg/g after appropriate doping. Proposed and proved the adsorption mechanism of nanotubes was the surface electrostatic adsorption mechanism, the Na + replacement, and uranyl ion crystallization. In addition, nanotubes have excellent selectivity and recyclability. The finding in this work provides a fundamental understanding of the efficient usage of V x -Na 2 TiOSiO 4 MWNTs in practical applications.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessVx-Na2tiosio4 Mwnts for Uranium Extraction from Seawater and Recovery from Nuclear Waste
Uranyl ion pollution is a serious environmental problem, and developing novel adsorption materials is essential for uranyl ion removal. V-doped Na 2 TiOSiO 4 multiwalled nanotubes (V x -Na 2 TiOSiO 4 MWNTs) were prepared by an effective hydrothermal process and their uranyl ion adsorption properties were investigated. The special morphology, high specific surface area, and surface potential made MWNTs an excellent adsorbent. Appropriate doping can further improve the adsorption performance of nanotubes. The saturated adsorption capacities of nanotubes in aqueous solution and simulated seawater were 593.2 and 236.9 mg/g, respectively, and can reach 684.6 and 287.0 mg/g after appropriate doping. Proposed and proved the adsorption mechanism of nanotubes was the surface electrostatic adsorption mechanism, the Na + replacement, and uranyl ion crystallization. In addition, nanotubes have excellent selectivity and recyclability. The finding in this work provides a fundamental understanding of the efficient usage of V x -Na 2 TiOSiO 4 MWNTs in practical applications.
- Open Access
- 25 September 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (52) , 30340-30349
VOX supported on TiO2–Ce0.9Zr0.1O2 core–shell structure catalyst for NH3-SCR of NO
VOX/TiO2–Ce0.9Zr0.1O2 catalyst exhibits high activity and selectivity in a wide temperature window.
- 25 September 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (52) , 30340-30349
Open AccessVOX supported on TiO2–Ce0.9Zr0.1O2 core–shell structure catalyst for NH3-SCR of NO
VOX/TiO2–Ce0.9Zr0.1O2 catalyst exhibits high activity and selectivity in a wide temperature window.
- 24 June 2019
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 43 (29) , 11684-11691
Effect of A-site substitution on the simultaneous catalytic removal of NOx and soot by LaMnO3 perovskites
The simultaneous catalytic removal of NOx and soot by La1−xMxMnO3 (M = K, Sr, Pr; x = 0, 0.1, 0.2, 0.3) perovskites was investigated.
- 24 June 2019
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 43 (29) , 11684-11691
Effect of A-site substitution on the simultaneous catalytic removal of NOx and soot by LaMnO3 perovskites
The simultaneous catalytic removal of NOx and soot by La1−xMxMnO3 (M = K, Sr, Pr; x = 0, 0.1, 0.2, 0.3) perovskites was investigated.
- 18 February 2019
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 43 (10) , 4196-4204
The effect of the structure and oxygen defects on the simultaneous removal of NO x and soot by La 2−x Ba x CuO 4
La 2−x Ba x CuO 4 ( x = 0–0.6) perovskite-like oxides were prepared by the citric acid sol–gel method.
- 18 February 2019
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 43 (10) , 4196-4204
The effect of the structure and oxygen defects on the simultaneous removal of NO x and soot by La 2−x Ba x CuO 4
La 2−x Ba x CuO 4 ( x = 0–0.6) perovskite-like oxides were prepared by the citric acid sol–gel method.
- 8 February 2019
- Published by Springer Nature in Catalysis Letters
- Vol. 149 (4) , 1087-1099
Comparative Study on Removal of NOx and Soot with A-site Substituted La2NiO4 Perovskite-like by Different Valence Cation
- 8 February 2019
- Published by Springer Nature in Catalysis Letters
- Vol. 149 (4) , 1087-1099
Comparative Study on Removal of NOx and Soot with A-site Substituted La2NiO4 Perovskite-like by Different Valence Cation
- Open Access
- 4 September 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (54) , 31081-31093
A relationship between the V4+/V5+ ratio and the surface dispersion, surface acidity, and redox performance of V2O5–WO3/TiO2 SCR catalysts
A series of V2O5–WO3/TiO2 catalysts with different vanadium loading amounts were prepared by an impregnation method and were characterized by XRD, Raman spectroscopy, XPS, DRIFTS, Py-DRIFTS, NH3-TPD, H2-TPR, etc. The results show that the catalytic activity is related to the ratio of V4+/V5+. The variation of the V4+/V5+ ratio caused by the different dispersion states of vanadia oxide leads to changes in the surface acidity and redox properties of the catalysts. As the V4+/V5+ ratio reaches the maximum value, the apparent activation energy (Ea) required to form the transition state on the Brønsted acid sites is the lowest. Artificial regulation of vanadium loading to properly increase V4+/V5+ content may affect the interactions between V, W, O and Ti atoms, which enhances NH3-SCR reaction performance.
- 4 September 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (54) , 31081-31093
Open AccessA relationship between the V4+/V5+ ratio and the surface dispersion, surface acidity, and redox performance of V2O5–WO3/TiO2 SCR catalysts
A series of V2O5–WO3/TiO2 catalysts with different vanadium loading amounts were prepared by an impregnation method and were characterized by XRD, Raman spectroscopy, XPS, DRIFTS, Py-DRIFTS, NH3-TPD, H2-TPR, etc. The results show that the catalytic activity is related to the ratio of V4+/V5+. The variation of the V4+/V5+ ratio caused by the different dispersion states of vanadia oxide leads to changes in the surface acidity and redox properties of the catalysts. As the V4+/V5+ ratio reaches the maximum value, the apparent activation energy (Ea) required to form the transition state on the Brønsted acid sites is the lowest. Artificial regulation of vanadium loading to properly increase V4+/V5+ content may affect the interactions between V, W, O and Ti atoms, which enhances NH3-SCR reaction performance.
- Open Access
Mn-Ce-V-WOx/TiO2 SCR Catalysts: Catalytic Activity, Stability and Interaction among Catalytic Oxides
A series of Mn-Ce-V-WOx/TiO2 composite oxide catalysts with different molar ratios (active components/TiO2 = 0.1, 0.2, 0.3, 0.6) have been prepared by wet impregnation method and tested in selective catalytic reduction (SCR) of NO by NH3 in a wide temperature range. These catalysts were also characterized by X-ray diffraction (XRD), Transmission Electron Microscope (TEM), in situ Fourier Transform infrared spectroscopy (in situ FTIR), H2-Temperature programmed reduction (H2-TPR) and X-ray photoelectron spectroscopy (XPS). The results show the catalyst with a molar ratio of active components/TiO2 = 0.2 exhibits highest NO conversion value between 150 °C to 400 °C and good resistance to H2O and SO2 at 250 °C with a gas hourly space velocity (GHSV) value of 40,000 h−1. Different oxides are well dispersed and interact with each other. NH3 and NO are strongly adsorbed on the catalyst surface and the adsorption of the reactant gas leads to a redox cycle with the valence state change among the surface oxides. The adsorption of SO2 on Mn4+ and Ce4+ results in good H2O and SO2 resistance of the catalyst, but the effect of Mn and Ce are more than superior water and sulfur resistance. The diversity of valence states of the four active components and their high oxidation-reduction performance are the main reasons for the high NO conversion in this system.
Open AccessMn-Ce-V-WOx/TiO2 SCR Catalysts: Catalytic Activity, Stability and Interaction among Catalytic Oxides
A series of Mn-Ce-V-WOx/TiO2 composite oxide catalysts with different molar ratios (active components/TiO2 = 0.1, 0.2, 0.3, 0.6) have been prepared by wet impregnation method and tested in selective catalytic reduction (SCR) of NO by NH3 in a wide temperature range. These catalysts were also characterized by X-ray diffraction (XRD), Transmission Electron Microscope (TEM), in situ Fourier Transform infrared spectroscopy (in situ FTIR), H2-Temperature programmed reduction (H2-TPR) and X-ray photoelectron spectroscopy (XPS). The results show the catalyst with a molar ratio of active components/TiO2 = 0.2 exhibits highest NO conversion value between 150 °C to 400 °C and good resistance to H2O and SO2 at 250 °C with a gas hourly space velocity (GHSV) value of 40,000 h−1. Different oxides are well dispersed and interact with each other. NH3 and NO are strongly adsorbed on the catalyst surface and the adsorption of the reactant gas leads to a redox cycle with the valence state change among the surface oxides. The adsorption of SO2 on Mn4+ and Ce4+ results in good H2O and SO2 resistance of the catalyst, but the effect of Mn and Ce are more than superior water and sulfur resistance. The diversity of valence states of the four active components and their high oxidation-reduction performance are the main reasons for the high NO conversion in this system.
- 13 February 2015
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 39 (5) , 3588-3596
Effect of the V4+(3+)/V5+ ratio on the denitration activity for V2O5–WO3/TiO2 catalysts
Variation of monolayer dispersed and polymerized VOx species (a) and apparent activation energy (Ea) of V3W8Ti catalysts.
- 13 February 2015
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 39 (5) , 3588-3596
Effect of the V4+(3+)/V5+ ratio on the denitration activity for V2O5–WO3/TiO2 catalysts
Variation of monolayer dispersed and polymerized VOx species (a) and apparent activation energy (Ea) of V3W8Ti catalysts.