Valery Petrovich Dimitrov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Valery Petrovich Dimitrov has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Lyudmila Victorovna Borisova
Don State Technical University
11 shared publications - Inna Nikolayevna Nurutdinova
Don State Technical University
6 shared publications - Alexey A. Papchenko
Don State Technical University
2 shared publications - Andrey K. Tugengold
Don State Technical University
2 shared publications - Andrey Kirillovich Tugengold
Don State Technical University
2 shared publications Don State Technical University
2 shared publications
Latest Publications
- Open Access
- 24 June 2026
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 36 (2)
Structure of the Information System for Solving the Problem of Adjusting Harvesters
Introduction. The use of the capabilities of the design of modern grain harvesters is limited by the human factor, in particular, by the significant information load on the operator. To increase the efficiency of harvesting operations and automate the process of adjusting agricultural machinery, it is relevant to develop an information system for adjusting harvesters. Aim of the Study. The study is aimed at developing an approach to solving the problem of optimal adjustment of adjustable parameters of the combine harvester working bodies through using the introduction of intelligent information systems. Materials and Methods. The study subject is a decision support software system for preliminary adjustment of grain harvester adjustable parameters. To solve the problem, there were used the methods of system analysis, expert assessment, fuzzy simulation, and relational database design. Client-server architecture and an embedded Database Managemen. System SQLite were used as the hardware and software basis. Results. There has been proposed a hierarchical structure for the task of preliminary adjusting of agricultural machinery working bodies. This structure consists of layers and elements and is the basis for the software system architecture. The system can operate in two modes: an expert mode and user mode. The expert system knowledge base for adjustment is based on a remote relational Database Management System with the ability to store all data locally for expert work and relevant data selected by experts for user work. There has been collected and analyzed expert information, which is used to create an expert knowledge base. There have been considered various combinations of external factor values, for which a conclusion about specific values for adjustable parameters has been derived. Discussion and Conclusion. The developed information system allows formalizing the preliminary adjustment process for the harvester adjustable parameters and reducing the dependence of decision-making on the operator subjective experience. The practical importance of the study is in the ability to use the system to support experts and users when selecting initial parameter values in changing conditions of harvesting. Future studies are relevant, because of the necessity of expanding the knowledge base in the area under studying, taking into account a greater number of factors, and developing mechanisms for automatic adjustment of parameters in real time.
- 24 June 2026
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 36 (2)
Open AccessStructure of the Information System for Solving the Problem of Adjusting Harvesters
Introduction. The use of the capabilities of the design of modern grain harvesters is limited by the human factor, in particular, by the significant information load on the operator. To increase the efficiency of harvesting operations and automate the process of adjusting agricultural machinery, it is relevant to develop an information system for adjusting harvesters. Aim of the Study. The study is aimed at developing an approach to solving the problem of optimal adjustment of adjustable parameters of the combine harvester working bodies through using the introduction of intelligent information systems. Materials and Methods. The study subject is a decision support software system for preliminary adjustment of grain harvester adjustable parameters. To solve the problem, there were used the methods of system analysis, expert assessment, fuzzy simulation, and relational database design. Client-server architecture and an embedded Database Managemen. System SQLite were used as the hardware and software basis. Results. There has been proposed a hierarchical structure for the task of preliminary adjusting of agricultural machinery working bodies. This structure consists of layers and elements and is the basis for the software system architecture. The system can operate in two modes: an expert mode and user mode. The expert system knowledge base for adjustment is based on a remote relational Database Management System with the ability to store all data locally for expert work and relevant data selected by experts for user work. There has been collected and analyzed expert information, which is used to create an expert knowledge base. There have been considered various combinations of external factor values, for which a conclusion about specific values for adjustable parameters has been derived. Discussion and Conclusion. The developed information system allows formalizing the preliminary adjustment process for the harvester adjustable parameters and reducing the dependence of decision-making on the operator subjective experience. The practical importance of the study is in the ability to use the system to support experts and users when selecting initial parameter values in changing conditions of harvesting. Future studies are relevant, because of the necessity of expanding the knowledge base in the area under studying, taking into account a greater number of factors, and developing mechanisms for automatic adjustment of parameters in real time.
- Open Access
- 25 March 2025
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 35 (1) , 13-29
Technology for Adjusting Working Tools of a Rotary Harvester Based on Fuzzy Modelling
Introduction. The need to increase productivity of grain harvesting equipment and minimize crop losses has given rise to the increasing use of axial-flow combines (rotary harvester). The efficiency of harvesting operations depends on correct setting of the adjustable harvester parameters allowing full use of its design capabilities. For this reason, it is relevant to study the problems of optimal adjusting the working tools of a harvester operating in various environmental conditions.Aim of the Study. The study was aimed at developing an approach to the choice of optimal values for the adjustable parameters of the rotor type grain harvesters.Materials and Methods. Harvesting quality indices, adjustable parameters, and environmental factors are interdependent, so there has been used a linguistic approach to the description of the subject domain. Information about environmental conditions, the harvester technical state, interrelations between parameters and harvesting indicators is fuzzy that has led to the application of the theory of fuzzy sets to solve the problem of optimal choice of the adjustable parameters. The procedure of fuzzy logic inference has been performed in Fuzzy Logic Toolbox (MatLab) package.Results. There are presented the results of the developed approach to the problem of operational presetting adjustable parameters of a rotary harvester when harvesting various grain crops under different environmental conditions. The problem solution concept has been developed on the basis of the fuzzy logic formalism. A linguistic description of the problem has been given. Models of the considered features in the form of membership functions are proposed, which adequately take into account the external conditions in which the harvester operates. Basic and extended term sets have been identified. The optimal models have been selected on the basis of the consistency analysis of fuzzy expert knowledge using the indicators of general and pair consistency of the models. The results of the solutions obtained have been illustrated. On the basis of collected and analyzed expert information there has been created a base of fuzzy expert knowledge including the fuzzy production rules for 12 adjustable parameters of TORUM harvester. Different combinations of the values of environmental factors have been considered, for which there has been given an inference about specific values of the adjustable parameters. Discussion and Conclusion. The practical significance of the research carried out lies inthe creation of a basis for an intelligent information system to help a rotary harvesteroperator in making decisions on choosing adjustable parameter values when harvestingvarious grain crops. The use of such a system in field conditions in combination with sensors for continuous monitoring of harvesting conditions and an automated image analysis system will allow for a prompt response to changing conditions, significantly increase work efficiency and reduce decision-making time. The implementation of such systems will significantly reduce the information load on the operator, as well as use operators with little practical experience during harvesting. The development of such information systems creates the preconditions for increasing the level of automation of intelligent control of a grain harvester and is an important stage in the implementation of the approach to unmanned control of a harvester.
- 25 March 2025
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 35 (1) , 13-29
Open AccessTechnology for Adjusting Working Tools of a Rotary Harvester Based on Fuzzy Modelling
Introduction. The need to increase productivity of grain harvesting equipment and minimize crop losses has given rise to the increasing use of axial-flow combines (rotary harvester). The efficiency of harvesting operations depends on correct setting of the adjustable harvester parameters allowing full use of its design capabilities. For this reason, it is relevant to study the problems of optimal adjusting the working tools of a harvester operating in various environmental conditions.Aim of the Study. The study was aimed at developing an approach to the choice of optimal values for the adjustable parameters of the rotor type grain harvesters.Materials and Methods. Harvesting quality indices, adjustable parameters, and environmental factors are interdependent, so there has been used a linguistic approach to the description of the subject domain. Information about environmental conditions, the harvester technical state, interrelations between parameters and harvesting indicators is fuzzy that has led to the application of the theory of fuzzy sets to solve the problem of optimal choice of the adjustable parameters. The procedure of fuzzy logic inference has been performed in Fuzzy Logic Toolbox (MatLab) package.Results. There are presented the results of the developed approach to the problem of operational presetting adjustable parameters of a rotary harvester when harvesting various grain crops under different environmental conditions. The problem solution concept has been developed on the basis of the fuzzy logic formalism. A linguistic description of the problem has been given. Models of the considered features in the form of membership functions are proposed, which adequately take into account the external conditions in which the harvester operates. Basic and extended term sets have been identified. The optimal models have been selected on the basis of the consistency analysis of fuzzy expert knowledge using the indicators of general and pair consistency of the models. The results of the solutions obtained have been illustrated. On the basis of collected and analyzed expert information there has been created a base of fuzzy expert knowledge including the fuzzy production rules for 12 adjustable parameters of TORUM harvester. Different combinations of the values of environmental factors have been considered, for which there has been given an inference about specific values of the adjustable parameters. Discussion and Conclusion. The practical significance of the research carried out lies inthe creation of a basis for an intelligent information system to help a rotary harvesteroperator in making decisions on choosing adjustable parameter values when harvestingvarious grain crops. The use of such a system in field conditions in combination with sensors for continuous monitoring of harvesting conditions and an automated image analysis system will allow for a prompt response to changing conditions, significantly increase work efficiency and reduce decision-making time. The implementation of such systems will significantly reduce the information load on the operator, as well as use operators with little practical experience during harvesting. The development of such information systems creates the preconditions for increasing the level of automation of intelligent control of a grain harvester and is an important stage in the implementation of the approach to unmanned control of a harvester.
- Open Access
- 28 August 2024
- Published by EDP Sciences in BIO Web of Conferences
- Vol. 126, 01036
Information support for the adjustment process of grain harvester
The article discusses many external harvesting factors and adjustable parameters of the working parts of the TORUM combine harvester. A description is given of the technologies used to develop a program - a highly specialized database management system (DMS) - for information support of the process of adjusting a combine harvester, namely the system programming language Rust and modern web technologies for creating desktop applications with a graphical user interface. A hint system is described to improve the user experience for interacting with domain data. The “Settings” subsystem, used for preliminary configuration of combine harvesters, is examined in detail, and the Entity relationship is shown - a diagram of the database tables related to this subsystem. The software allows you to work with the database in two operating modes: in user mode for viewing the knowledge of interest in the subject area and in expert mode for editing, adding and deleting this knowledge. The implementation of the software system under consideration (expert system) can reduce time and improve the quality of decisions made and, as a result, will increase the shift productivity of combine harvesters.
- 28 August 2024
- Published by EDP Sciences in BIO Web of Conferences
- Vol. 126, 01036
Open AccessInformation support for the adjustment process of grain harvester
The article discusses many external harvesting factors and adjustable parameters of the working parts of the TORUM combine harvester. A description is given of the technologies used to develop a program - a highly specialized database management system (DMS) - for information support of the process of adjusting a combine harvester, namely the system programming language Rust and modern web technologies for creating desktop applications with a graphical user interface. A hint system is described to improve the user experience for interacting with domain data. The “Settings” subsystem, used for preliminary configuration of combine harvesters, is examined in detail, and the Entity relationship is shown - a diagram of the database tables related to this subsystem. The software allows you to work with the database in two operating modes: in user mode for viewing the knowledge of interest in the subject area and in expert mode for editing, adding and deleting this knowledge. The implementation of the software system under consideration (expert system) can reduce time and improve the quality of decisions made and, as a result, will increase the shift productivity of combine harvesters.
- Open Access
- 22 June 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 398, 01001
Criteria-Based Approach to Solving the Problem of Technological Regulation Rotary Combine
The task of technological adjustment of the working bodies of a rotary combine harvester is not trivial. The complexity of the task is due to the need to take into account a large number of signs (environmental factors and parameters of the technical condition of the machine), and the level of uncertainty of the values of these signs is quite high. Therefore, when searching for optimal values of the regulated parameters of the combine harvester, ensuring that the values of the work quality indicators do not exceed the permissible ones, it is advisable to use an intelligent information system. The use of this system will allow using various methods and algorithms for finding the desired solutions. In the conditions of uncertainty characteristic of the problem under consideration of adjusting the adjustable parameters of the machine, it is advisable to use a game-theoretic approach when creating an intelligent system for setting up a combine harvester. This approach will provide variability of methods for choosing the optimal strategy for finding a rational solution.Based on the analysis of the subject area, the concepts of performance indicator matrices and the risk of making an ineffective decision are introduced. The choice of a strategy for finding the reason for the deviation of the harvester’s performance indicator is considered based on three criteria: Laplace, mathematical expectation and Savage, widely used in decision-making tasks in the so-called “games with nature”. An example of choosing a strategy for finding the cause of a violation of the technological process of grain harvesting and an adequate response to eliminate it is given. The analysis of the calculation results is carried out, the conditions and scope of the proposed approach are presented.
- 22 June 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 398, 01001
Open AccessCriteria-Based Approach to Solving the Problem of Technological Regulation Rotary Combine
The task of technological adjustment of the working bodies of a rotary combine harvester is not trivial. The complexity of the task is due to the need to take into account a large number of signs (environmental factors and parameters of the technical condition of the machine), and the level of uncertainty of the values of these signs is quite high. Therefore, when searching for optimal values of the regulated parameters of the combine harvester, ensuring that the values of the work quality indicators do not exceed the permissible ones, it is advisable to use an intelligent information system. The use of this system will allow using various methods and algorithms for finding the desired solutions. In the conditions of uncertainty characteristic of the problem under consideration of adjusting the adjustable parameters of the machine, it is advisable to use a game-theoretic approach when creating an intelligent system for setting up a combine harvester. This approach will provide variability of methods for choosing the optimal strategy for finding a rational solution.Based on the analysis of the subject area, the concepts of performance indicator matrices and the risk of making an ineffective decision are introduced. The choice of a strategy for finding the reason for the deviation of the harvester’s performance indicator is considered based on three criteria: Laplace, mathematical expectation and Savage, widely used in decision-making tasks in the so-called “games with nature”. An example of choosing a strategy for finding the cause of a violation of the technological process of grain harvesting and an adequate response to eliminate it is given. The analysis of the calculation results is carried out, the conditions and scope of the proposed approach are presented.
- Open Access
- 22 June 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 398, 01002
Formalization of Fuzzy Statements in the Task of Technological Adjustment of Grain Combines
The article considers various types of statements used in the linguistic description of input factors and regulated parameters of a combine harvester when solving the problem of its technological adjustment. The linguistic description of the environmental conditions, the regulated parameters of the combine and the characteristics of the quality of harvesting operations is presented. The technique of modeling fuzzy statements for the formalization of knowledge in an expert system designed to inform the operator of the combine when choosing the values of adjustable parameters corresponding to the operating conditions of the combine is presented. The technique is illustrated by an example of fuzzy inference.
- 22 June 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 398, 01002
Open AccessFormalization of Fuzzy Statements in the Task of Technological Adjustment of Grain Combines
The article considers various types of statements used in the linguistic description of input factors and regulated parameters of a combine harvester when solving the problem of its technological adjustment. The linguistic description of the environmental conditions, the regulated parameters of the combine and the characteristics of the quality of harvesting operations is presented. The technique of modeling fuzzy statements for the formalization of knowledge in an expert system designed to inform the operator of the combine when choosing the values of adjustable parameters corresponding to the operating conditions of the combine is presented. The technique is illustrated by an example of fuzzy inference.
- 25 February 2023
- Published by Springer Nature
- p. 992-998
The Generalized Model of Mechanized Harvesting of Grain Crops
- 25 February 2023
- Published by Springer Nature
- p. 992-998
The Generalized Model of Mechanized Harvesting of Grain Crops
- Open Access
- 30 December 2022
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 32 (4) , 552-566
Method for Determining the Initial Values of the Adjustable Parameters of the Combine Harvester Cutting Unit
Introduction. The article presents the solution of the problem of identifying the subject area “Preliminary adjustment of the working elements of the combine harvester cutting unitˮ. The correct choice of parameter values of the cutting unit as the most important element of a combine harvester is one of the main conditions for providing high quality harvesting. It is the fact that defined the object of the present study. The aim of the study is to develop a method for adjusting the values of parameters of a combine harvester cutting unit for the harvested crop and harvesting conditions. Materials and Methods. Decisions on the values of technological parameters of the harvester, which is a complex hierarchical system, are made on the basis of information about the external environment and the machine technical state. The incoming data are quantitative, qualitative and evaluative in nature. Taking into account the heterogeneity and vagueness of the information, the decisions are made through using intelligent information systems, which are based on the fuzzy logic programming and use a linguistic approach to describe the subject area. This approach is used because of the complexity and ambiguity of the relationships between regulated parameters and external factors. Results. The subject area “Preliminary adjustment of the combine harvester cutting unit parametersˮ has been investigated. The formal-logical scheme for selecting the values of adjustable parameters of the combine harvester cutting unit is described in detail. The main factors influencing the values of the combine harvester cutting unit adjustable parameters are defined, their linguistic description is given, the corresponding input and output linguistic variables are introduced, and the membership functions are built on the basis of expert information. The agreement analysis of the presented information has been carried out and optimal models have been selected. A fuzzy knowledge base is created, on which the deductive inference of decisions is based. Discussion and Conclusion. The proposed approach and created fuzzy knowledge base can be used as the basis for an intelligent decision-making system for adjusting combine parameters. Using this system in the field in combination with sensors for continuous monitoring of harvesting conditions and an automated image analysis system will allow responding quickly to changing conditions, will significantly improve operational efficiency and reduce decision-making time.
- 30 December 2022
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 32 (4) , 552-566
Open AccessMethod for Determining the Initial Values of the Adjustable Parameters of the Combine Harvester Cutting Unit
Introduction. The article presents the solution of the problem of identifying the subject area “Preliminary adjustment of the working elements of the combine harvester cutting unitˮ. The correct choice of parameter values of the cutting unit as the most important element of a combine harvester is one of the main conditions for providing high quality harvesting. It is the fact that defined the object of the present study. The aim of the study is to develop a method for adjusting the values of parameters of a combine harvester cutting unit for the harvested crop and harvesting conditions. Materials and Methods. Decisions on the values of technological parameters of the harvester, which is a complex hierarchical system, are made on the basis of information about the external environment and the machine technical state. The incoming data are quantitative, qualitative and evaluative in nature. Taking into account the heterogeneity and vagueness of the information, the decisions are made through using intelligent information systems, which are based on the fuzzy logic programming and use a linguistic approach to describe the subject area. This approach is used because of the complexity and ambiguity of the relationships between regulated parameters and external factors. Results. The subject area “Preliminary adjustment of the combine harvester cutting unit parametersˮ has been investigated. The formal-logical scheme for selecting the values of adjustable parameters of the combine harvester cutting unit is described in detail. The main factors influencing the values of the combine harvester cutting unit adjustable parameters are defined, their linguistic description is given, the corresponding input and output linguistic variables are introduced, and the membership functions are built on the basis of expert information. The agreement analysis of the presented information has been carried out and optimal models have been selected. A fuzzy knowledge base is created, on which the deductive inference of decisions is based. Discussion and Conclusion. The proposed approach and created fuzzy knowledge base can be used as the basis for an intelligent decision-making system for adjusting combine parameters. Using this system in the field in combination with sensors for continuous monitoring of harvesting conditions and an automated image analysis system will allow responding quickly to changing conditions, will significantly improve operational efficiency and reduce decision-making time.
- Open Access
- 1 January 2021
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 31 (3) , 364-379
Knowledge Modeling in Troubleshooting
Introduction. The article describes the approach to solving the problem of complex technical system troubleshooting based on expert knowledge modeling. Intelligent information systems are widely used to solve the problems of diagnostics of multilevel systems including combine harvesters. The formal description of the subject domain knowledge is the framework for building the knowledge base of these systems. The sequence of creating an expert system knowledge base in accordance with production rules is considered. Materials and Methods. The approach is founded on the fault function table. As the object of diagnostics, one of the subsystems of the combine harvester electric equipment "opening the hopper roof flaps" is considered. The basis for constructing a sequence of elementary checks is a system of logical equations describing both the serviceable and possible faulty states of the subsystem. Results. A structural logic model is developed. As a result of analyzing the fault function table, the sets of elementary checks are determined. Four criteria have been used to analyze the weight of these checks. The authors have determined optimal sequence of checks and have developed a decision tree, which allows finding the cause of the malfunction and is the basis for creating the knowledge base of an intelligent information system. A fragment of the knowledge base is given. Discussion and Conclusion. The proposed approach of expert knowledge modelling increases the efficiency of the unit for troubleshooting of the intelligent decision support system. It makes possible to structure the base of expertise and establishing the optimal sequence of elementary checks. This allows determining the optimal sequence of application of the knowledge base production rule that makes it possible to reduce the time of restoring the serviceability of combines.
- 1 January 2021
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 31 (3) , 364-379
Open AccessKnowledge Modeling in Troubleshooting
Introduction. The article describes the approach to solving the problem of complex technical system troubleshooting based on expert knowledge modeling. Intelligent information systems are widely used to solve the problems of diagnostics of multilevel systems including combine harvesters. The formal description of the subject domain knowledge is the framework for building the knowledge base of these systems. The sequence of creating an expert system knowledge base in accordance with production rules is considered. Materials and Methods. The approach is founded on the fault function table. As the object of diagnostics, one of the subsystems of the combine harvester electric equipment "opening the hopper roof flaps" is considered. The basis for constructing a sequence of elementary checks is a system of logical equations describing both the serviceable and possible faulty states of the subsystem. Results. A structural logic model is developed. As a result of analyzing the fault function table, the sets of elementary checks are determined. Four criteria have been used to analyze the weight of these checks. The authors have determined optimal sequence of checks and have developed a decision tree, which allows finding the cause of the malfunction and is the basis for creating the knowledge base of an intelligent information system. A fragment of the knowledge base is given. Discussion and Conclusion. The proposed approach of expert knowledge modelling increases the efficiency of the unit for troubleshooting of the intelligent decision support system. It makes possible to structure the base of expertise and establishing the optimal sequence of elementary checks. This allows determining the optimal sequence of application of the knowledge base production rule that makes it possible to reduce the time of restoring the serviceability of combines.
- 23 June 2020
- Published by Springer Nature
- p. 362-371
The Problem of Updating Adjustable Parameters of a Grain Harvester in Intelligent Information Systems
- 23 June 2020
- Published by Springer Nature
- p. 362-371
The Problem of Updating Adjustable Parameters of a Grain Harvester in Intelligent Information Systems
- Open Access
- 1 January 2020
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 30 (1) , 60-75
Selecting a Strategy for Determining the Combine Harvester Parameter Settings
Introduction. The article deals with adjusting the parameter settings of a combine harvester working bodies. For adjustment of complex hierarchical multilevel systems, the intellectual methods based on fuzzy expert information are used. The incoming quantitative, qualitative and evaluation information is analyzed when adjusting the combine harvester. The different typesof uncertainty in considering semantic spaces of external environment factors and regulated parameters of the machine cause the application of logical and linguistic approach and mathematical apparatus of fuzzy logic for determining the optimal initial settings. The complex system of interrelations between parameters, indicators of quality of harvest, and factors of external environment causes the necessity to adjust the parameters of combine working elements in the process of harvesting. This function is performed by the correction unit in the intelligent decision support system. In the present article, the questions of creating a knowledge base for correcting adjustment parameters in cases when there are deviations of values of harvesting quality indicators from normative values are considered in detail. Materials and Methods. Interrelations between performance indicators and regulated parameters are established by empirical rules obtained through the collection and analysis of expert information. To optimize the mechanism of intellectual information system output and reduce the time of decision making, there is a necessity to establish the relevance of used knowledge base rules. To solve this problem, theoretical and game approaches are used, concepts of the matrix of performance indicators and the matrix of risks of making an inefficient decision are used. Results. An example of choosing a strategy of searching for an adequate response to the fault of the harvesting indices in the form of "losses of feeble grain with chaff" has been given. The choice of fault response strategies on the basis of Laplace criterion, expected-value criterion, and Savage test used for decision-making in "games with nature" has been considered. The method of the decision-making process in the problem under consideration with the application of the mentioned criteria were illustrated, the analysis of the obtained results was carried out. Discussion and Conclusion. The suggested approach substantially increases performance of the unit of intelligent system updating. It allows structuring the expert knowledge base and establishing an optimal sequence of application of production rules; this provides efficiency of the updating process of the adjustable harvester parameters and also reduces the time for decision-making. This approach can be used while solving the problems of updating technological adjustments in different technical systems and devices.
- 1 January 2020
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 30 (1) , 60-75
Open AccessSelecting a Strategy for Determining the Combine Harvester Parameter Settings
Introduction. The article deals with adjusting the parameter settings of a combine harvester working bodies. For adjustment of complex hierarchical multilevel systems, the intellectual methods based on fuzzy expert information are used. The incoming quantitative, qualitative and evaluation information is analyzed when adjusting the combine harvester. The different typesof uncertainty in considering semantic spaces of external environment factors and regulated parameters of the machine cause the application of logical and linguistic approach and mathematical apparatus of fuzzy logic for determining the optimal initial settings. The complex system of interrelations between parameters, indicators of quality of harvest, and factors of external environment causes the necessity to adjust the parameters of combine working elements in the process of harvesting. This function is performed by the correction unit in the intelligent decision support system. In the present article, the questions of creating a knowledge base for correcting adjustment parameters in cases when there are deviations of values of harvesting quality indicators from normative values are considered in detail. Materials and Methods. Interrelations between performance indicators and regulated parameters are established by empirical rules obtained through the collection and analysis of expert information. To optimize the mechanism of intellectual information system output and reduce the time of decision making, there is a necessity to establish the relevance of used knowledge base rules. To solve this problem, theoretical and game approaches are used, concepts of the matrix of performance indicators and the matrix of risks of making an inefficient decision are used. Results. An example of choosing a strategy of searching for an adequate response to the fault of the harvesting indices in the form of "losses of feeble grain with chaff" has been given. The choice of fault response strategies on the basis of Laplace criterion, expected-value criterion, and Savage test used for decision-making in "games with nature" has been considered. The method of the decision-making process in the problem under consideration with the application of the mentioned criteria were illustrated, the analysis of the obtained results was carried out. Discussion and Conclusion. The suggested approach substantially increases performance of the unit of intelligent system updating. It allows structuring the expert knowledge base and establishing an optimal sequence of application of production rules; this provides efficiency of the updating process of the adjustable harvester parameters and also reduces the time for decision-making. This approach can be used while solving the problems of updating technological adjustments in different technical systems and devices.