EBErlan Batyrbekov

Erlan Batyrbekov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Erlan Batyrbekov has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Diagnostics of Long-Term Erosion and Deposition of the Material of the First Wall in the KTM Tokamak: Testing and First Results

    by S. A. Krat, B. Zh. Chektybayev, E. G. Batyrbekov, I. A. Sorokin, V. A. Luzanov, T. Solarevic, S. S. Dovganyuk, Yu. M. Gasparyan, I. L. Tazhibayeva, E. A. Kashikbayev, et al.

    A diagnostic method for material transport (erosion and deposition) in the KTM tokamak vessel has been developed and tested for durations comparable to an experimental campaign. It is based on witness samples mounted in the tiles of the first wall of the tokamak vacuum vessel. It was found that the regions of greatest wall erosion are located near the equatorial plane and on the inner side of the upper dome. Deposition zones were identified on the outer periphery on the lower side of the chamber. Possible effects of conditioning and operational discharges on wall sputtering were considered.


  • Open Access

    Power Start-Up of the IVG.1M Reactor with Low-Enriched Uranium Fuel: Main Results

    by Erlan Batyrbekov, Vladimir Vityuk, Viktor Baklanov, Vyacheslav Gnyrya, Almas Azimkhanov, Radmila Sabitova, Irina Prozorova, Yuriy Popov, Ruslan Irkimbekov, Yekaterina Martynenko

    In support of global efforts to strengthen the nuclear non-proliferation regime, the IVG.1M research water-cooled thermal reactor at the National Nuclear Center of the Republic of Kazakhstan was successfully converted to low-enriched uranium (LEU, 19.75% 235U) fuel in 2023. The reactor’s operability with innovative bimetallic, fiber-type, dual-blade LEU fuel rods was experimentally verified during power start-up experiments. The test program included investigations of power distribution in the core, evaluation of temperature, power, and hydrodynamic reactivity effects, and the measurement of fission product release to the coolant. The results were in good agreement with safety calculations, confirming that the enrichment reduction did not degrade reactor performance characteristics. It was shown that the power reactivity effect increased by more than 1.5 times at a power level of 9 MW. The measured temperature reactivity coefficient (≈0.021 βeff/°C) and the level of fission product release remained within acceptable and expected limits.


  • Research in the Field of Controlled Thermonuclear Fusion in the Republic of Kazakhstan

    by E. G. Batyrbekov, I. L. Tazhibayeva, V. V. Baklanov, B. J. Chektybaev, D. B. Zarva, Ye. T. Koyanbayev, Yu. N. Gordienko, T. V. Kulsartov, A. J. Miniyazov, Yu. V. Ponkratov

    The article describes the generalized results of scientific research of the Republic of Kazakhstan in the field of controlled thermonuclear fusion and fusion materials science. The results of experimental studies on the KTM tokamak and the results of simulation studies of the interaction of plasma with the wall using a plasma-beam installation are presented, to study the properties of lithium-containing materials for the blanket of a fusion reactor and to promote lithium technologies for the protection of plasma-facing materials.


  • Open Access

    Conceptual View of the Implementation of the Nuclear Energy Program in the Republic of Kazakhstan

    by Erlan Batyrbekov, Vladimir Vityuk, Denis Zarva, Mazhit Sharipov

    This paper presents an analysis of the existing prerequisites and opportunities for the start-up of the Republic of Kazakhstan’s own full-fledged Nuclear Energy Program, a conceptual vision of the development of the Kazakhstani nuclear industry. Recommendations have been formulated for the timely and successful implementation of the program for the introduction of nuclear power plants into the country’s energy generation structure, the development of the necessary related nuclear infrastructure facilities, national legislation, and other issues directly related to nuclear power development.


  • Open Access

    Optical Radiation during Sputtering of Lithium into a Noble Gas Using a Nanosecond Electron Beam

    by Mendykhan Khasenov, Kuanysh Samarkhanov, Erlan Batyrbekov, Yuriy Gordienko, Inesh E. Kenzhina, Yevgeniy Tulubayev

    The optical radiation in a gaseous medium upon the irradiation of a lithium layer with a fast electron beam of a 5 ns duration has been studied. The irradiation chamber was filled with argon, krypton, or xenon at a pressure of 10 kPa up to 60 kPa. The lines of lithium atoms appear in the emission spectrum at a lithium layer temperature of 650–680 K, and the intensity of these lines sharply increases with the increasing temperature of the lithium layer. The optical radiation arises from both the transitions of noble gas atoms and the transition of the lithium atom in a time of about 20–30 ns. The duration of the radiation pulses at half maximum at temperatures above 800 K was 60–100 ns at a wavelength of 610.4 nm and 140–220 ns at 670.8 nm in krypton and argon. The various mechanisms for the population of lithium levels during the radiation pulse are discussed.


  • Open Access

    Experimental Facility to Study the Threshold Characteristics of Laser Action at the p-s-Transition of Noble Gas Atom upon Excitation by 6Li(n,α)3H Nuclear Reaction Products

    by Erlan Batyrbekov, Mendykhan Khasenov, Yuriy Gordienko, Kuanysh Samarkhanov, Inesh E. Kenzhina, Andrey Kotlyar, Alexandr Miller, Valentin Tskhe, Vadim Bochkov

    Almost all experimental studies of the characteristics of nuclear-excited plasma formed by excitation of gaseous media with nuclear reactions products are conducted at pulsed nuclear reactors that differ in the composition and design of the core, the duration, flux and fluence of the neutron pulse, the impulse repetition frequency, the volume and configuration of the irradiation space. This paper presents a description of the experimental (methodical and hardware) base of the National Nuclear Center of RK (Kurchatov) to conduct experiments on studying the threshold characteristics of laser action at the p-s-transition of noble gas atoms upon 6Li(n,α)3H nuclear reaction products excitation in conditions of a pulsed nuclear IGR reactor. To conduct in-pile reactor experiments, a special experimental facility was developed and constructed. The experimental facility functionally includes: in-pile experimental device, a gas–vacuum system, information and measurement system consisting of a system for registering and controlling the temperature of the device housing, and a system for registering optical radiation. The paper also briefly describes the methodology of in-pile reactor experiments on the pulsed nuclear reactor.


  • Open Access

    Influence of the Carbidized Tungsten Surface on the Processes of Interaction with Helium Plasma

    by Mazhyn Skakov, Arman Miniyazov, Erlan Batyrbekov, Viktor Baklanov, Yerbolat Koyanbayev, Aleksandr Gradoboev, Yernat Kozhakhmetov, Igor Sokolov, Timur Tulenbergenov, Gainiya Zhanbolatova

    This paper presents the results of experimental studies of the interaction of helium plasma with a near-surface tungsten carbide layer. The experiments were implemented at the plasma-beam installation. The helium plasma loading conditions were close to those expected in the ITER divertor. The technology of the plasma irradiation was applied in a stationary type linear accelerator. The impact of the helium plasma was realized in the course of the experiment with the temperatures of ~905 °C and ~1750 °C, which were calculated by simulating heat loading on a tungsten monoblock of the ITER divertor under the plasma irradiation at the load of 10 MW/m2 and 20 MW/m2, respectively. The structure was investigated with scanning microscopy, transmitting electron microscopy and X-ray analysis. The data were obtained showing that the surface morphology changed due to the erosion. It was found that the carbidization extremely impacted the plasma–tungsten interaction, as the plasma–tungsten interaction with the carbide layer led to the carbon sputtering and partial diffusion towards to the depth of the sample. According to these results, WC-based tungsten carbide is less protected against fracture by helium than W and W2C. An increase in temperature leads to much more extensive surface damage accompanied by the formation of molten and recrystallized flanges.


  • Open Access

    Influence of Hydrogen Plasma on the Surface Structure of Beryllium

    by Mazhyn Skakov, Erlan Batyrbekov, Igor Sokolov, Arman Miniyazov, Timur Tulenbergenov, Yerzhan Sapataev, Nurkhat Orazgaliyev, Olga Bukina, Gainiya Zhanbolatova, Yernat Kozhakhmetov

    This paper presents the research results of hydrogen plasma effect on the surface structure of the TGP-56 beryllium. In the linear simulator, the operating conditions of the first wall of ITER are simulated. Beryllium was irradiated with hydrogen plasma at surface temperatures of ~360 °C, ~800 °C, and ~1200 °C, depending on its location in the ITER chamber; with a different number of pulses with a duration of each pulse of 500 s. Samples of irradiated beryllium were subjected to a set of material studies. Experimental data were obtained on the change in the structure of the surface and edges of the beryllium samples after the plasma effect. It was found that at normal (2 MW/m2) and increased (4.7 MW/m2) heat fluxes on the first wall of the ITER, the edges and beryllium surface have good resistance to erosion. Under critical conditions close to the melting point, beryllium strongly erodes and evaporates. It has been established that this material has a high resource resistance to hydrogen plasma effect in the ITER under operating conditions.


  • Open Access

    Emission of Noble Gases Binary Mixtures under Excitation by the Products of the 6Li (n, α)3 H Nuclear Reaction

    by Kuanysh Samarkhanov, Mendykhan Khasenov, Erlan Batyrbekov, Inesh Kenzhina, Yerzhan Sapatayev, Vadim Bochkov

    The luminescence of Kr-Xe, Ar-Kr, and Ar-Xe mixtures was studied in the spectral range 300–970 nm when excited by 6Li (n, α)3 H nuclear reaction products in the core of a nuclear reactor. Lithium was deposited on walls of experimental cell in the form of a capillary-porous structure, which made it possible to measure up to a temperature of 730 K. The temperature dependence of the radiation intensity of noble gas atoms, alkali metals, and heteronuclear ionic noble gas molecules was studied. Also, as in the case of single-component gases, the appearance of lithium lines and impurities of sodium and potassium is associated with vaporization during the release of nuclear reaction products from the lithium layer. The excitation of lithium atoms occurs mainly as a result of the Penning process of lithium atoms on noble gas atoms in the 1s states and subsequent ion-molecular reactions. Simultaneous radiation at transitions of atoms of noble gases and lithium, heteronuclear ion molecules of noble gases allows us to increase the efficiency of direct conversion of nuclear energy into light.