Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Abdulmajeed Alhokabi has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimisation of compressive strength of foamed concrete with a novel Aspergillus iizukae EAN605 fungus

    by Honin Ali Yahya Alshaeer, J.M. Irwan, Abdullah Faisal Alshalif, Efaq Ali Noman, Mugahed Amran, Yaser Gamil, Abdulmajeed Alhokabi, Adel Ali Al-Gheethi


  • Open Access

    Review on Carbonation Study of Reinforcement Concrete Incorporating with Bacteria as Self-Healing Approach

    by Honin Ali Yahya Alshaeer, J. M. Irwan, Abdullah Faisal Alshalif, Amin Al-Fakih, Dina Yehia Zakaria Ewais, Abdelatif Salmi, Abdulmajeed Ali Alhokabi

    This study carried out a comprehensive review to determine the carbonation process that causes the most deterioration and destruction of concrete. The carbonation mechanism involved using carbon dioxide (CO2) to penetrate the concrete pore system into the atmosphere and reduce the alkalinity by decreasing the pH level around the reinforcement and initiation of the corrosion process. The use of bacteria in the concrete was to increase the pH of the concrete by producing urease enzyme. This technique may help to maintain concrete alkalinity in high levels, even when the carbonation process occurs, because the CO2 accelerates to the concrete and then converts directly to calcium carbonate, CaCO3. Consequently, the self-healing of the cracks and the pores occurred as a result of the carbonation process and bacteria enzyme reaction. As a result of these reactions, the concrete steel is protected, and the concrete properties and durability may improve. However, there are several factors that control carbonation which have been grouped into internal and external factors. Many studies on carbonation have been carried out to explore the effect of bacteria to improve durability and concrete strength. However, an in-depth literature review revealed that the use of bacteria as a self-healing mechanism can still be improved upon. This review aimed to highlight and discuss the possibility of applying bacteria in concrete to improve reinforcement concrete.


  • Open Access

    The Effect of POFA-Gypsum Binary Mixture Replacement on the Performance of Mechanical and Microstructural Properties Enhancements of Clays

    by Abdulmajeed Alhokabi, Muzamir Hasan, Mugahed Amran, Roman Fediuk, Nikolai Ivanovich Vatin, Honin Alshaeer

    Soft clay is categorized as problematic due to its weak and dispersive properties which requires stabilization. In Malaysia, there is another challenge, the increment of palm oil waste productions to meet the global demand for food oil. These two concerns motivate engineers to develop novel strategies for exploiting palm oil waste in soil stabilization. Utilizing POFA as a soil stabilizing agent is an economical and sustainable option due to that POFA contains high pozzolanic characteristics which make it more suitable and reliable to treat soft soil. This study uses the replacement portion of the soil with stabilizing agents -POFA and Gypsum; aiming to achieve Malaysia green technology goals by the balance of the economic expansion and environmental privilege. However, the aim of this study is to determine the effect of POFA-gypsum binary mixture replacement on the performance of mechanical and microstructural properties en-hancements of clays. Kaolin S300 is the control sample whereas POFA and gypsum are the used binders. The mechanical properties and shear strength with the curing period were tested. Results showed that treated clay marked increment of optimum water contents and reduction of maximum dry densities, a clear 200% of enhancement of treated clay’s compressive and shear strength with curing period as well as the amount of stabilizing agent to less than 15% of POFA and 6% of POFA. It is also found that as gypsum contains a high amount of lime (CaO), the results illustrate that strength raises significantly even with less curing time due to its high reactivity compared to silica and alu-mina. Overall, the results show an enhancement of mechanical and shear strength properties of treated kaolin supported by microstructural SEM imaging.


  • (undefined)

    by M Hasan, M S I Zaini, A S Zulkafli, A Wahab, A A Hokabi, K A Masri, R P Jaya, M Hyodo, M J Winter, M Sholichin, et al.

  • Open Access

    Improving the Early Properties of Treated Soft Kaolin Clay with Palm Oil Fuel Ash and Gypsum

    by Abdulmajeed Al-Hokabi, Muzamir Hasan, Mugahed Amran, Roman Fediuk, Nikolai Ivanovich Vatin, Sergey Klyuev

    Soft soil problems and increased production of fuel waste have emerged due to world population growth. These two problems are prompting engineers to introduce new methods of using waste fuel to stabilize the soil. Previous research has shown clear sustained improvements in soil properties using palm oil fuel ash (POFA) when mixed with a calcium-based binder such as NaCl, lime or cement. The use of such a stabilizing agent can reduce the economic problems associated with reducing the cost of waste disposal and create a sustainable ecological system. It is an alternative method of replacing part of the soil to ensure a balance between economic growth and ecological privilege, leading to the achievement of green technology goals. However, this research is aimed at improving the properties of processed soft kaolin clay with a combination of POFA and gypsum. The physical and mechanical properties of all samples were tested. The results showed a decrease in the specific gravity with the addition of POFA and an increase with gypsum alone, as well as a decrease with a mixture of POFA and gypsum and a decrease in the soil plasticity index due to a better increase in the plasticity limit compared to the liquid limit. This is considered a sign of improved geotechnical properties and reduced linear shrinkage. It was also shown that the treated clay showed an increase in the optimal water content and a drop in the maximum dry density. Nevertheless, it can be concluded that the initial properties of the processed soft kaolin clay with the addition of POFA can be significantly improved.