Gokhan Demirel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gokhan Demirel has a total of 206 co-authors. Here are the top co-authors by number of shared publications:
- Mehmet Yilmaz
Department of Chemical Engineering, Atatürk University, 25240 Erzurum, Turkey
11 shared publications - Hakan Erdoğan
Bio-inspired Materials Research Laboratory (BIMREL), Department of Chemistry, Gazi University, 06500 Ankara, Turkey
10 shared publications - Hakan Usta
Department of Materials Science and Nanotechnology Engineering Abdullah Gül University Kayseri Turkiye
9 shared publications Gorkem Liman
Bio‐inspired Materials Research Laboratory (BIMREL) Department of Chemistry Gazi University Ankara Türkiye
8 shared publicationsEsra Babur
Bio-inspired Materials Research Laboratory (BIMREL), Department of Chemistry, Gazi University, 06500 Ankara, Turkey
6 shared publications- Tuncer Caykara
Department of Chemistry, Faculty of Science, Gazi University, Ankara, Turkey
6 shared publications
Latest Publications
- Open Access
Hierarchically Rough rGO/HAp Nanocoatings on SLM Ti–6Al–4 V Implants for Enhanced Biointegration
Additive manufacturing of Ti–6Al–4V implants enables patient‐specific design, but process‐induced surface and microstructural variations can strongly affect biological performance. In this work, Ti64 samples with varying volumetric energy densities (VEDs) were fabricated by selective laser melting to examine the combined effects of processing and surface modification on cell response and antibacterial behavior. The specimens were surface activated by controlled acid etching and coated with hydroxyapatite/reduced graphene oxide (HAp/rGO) composite via electrophoretic deposition. Surface morphology, chemistry, and porosity were assessed using Scanning Electron Microscopy, X‐ray Photoelectron Spectroscopy, profilometry, micro‐CT. Micro‐CT showed higher internal porosity at lower VED, while a balance between densification and structural integrity was achieved at VED of 107 J mm − 3 . In vitro cytocompatibility demonstrated >90% viability for all samples, meeting ISO 10993‐5 requirements. Despite this, cell attachment depends on VED, the E63 condition exhibited the most uniform coverage after HAp/rGO coating, indicating an improved surface–cell interactions at lower VED. Antibacterial assays showed VED dependence; high‐VED‐E320 samples produced the highest biofilm formation even after coating, whereas low and intermediate VED conditions significantly reduced bacterial adhesion. Overall, biological functionality is observed to be governed by both coating and SLM parameters, with 107 J·mm − 3 offering the best combined structural, cytocompatible, and antibacterial performance.
Open AccessHierarchically Rough rGO/HAp Nanocoatings on SLM Ti–6Al–4 V Implants for Enhanced Biointegration
Additive manufacturing of Ti–6Al–4V implants enables patient‐specific design, but process‐induced surface and microstructural variations can strongly affect biological performance. In this work, Ti64 samples with varying volumetric energy densities (VEDs) were fabricated by selective laser melting to examine the combined effects of processing and surface modification on cell response and antibacterial behavior. The specimens were surface activated by controlled acid etching and coated with hydroxyapatite/reduced graphene oxide (HAp/rGO) composite via electrophoretic deposition. Surface morphology, chemistry, and porosity were assessed using Scanning Electron Microscopy, X‐ray Photoelectron Spectroscopy, profilometry, micro‐CT. Micro‐CT showed higher internal porosity at lower VED, while a balance between densification and structural integrity was achieved at VED of 107 J mm − 3 . In vitro cytocompatibility demonstrated >90% viability for all samples, meeting ISO 10993‐5 requirements. Despite this, cell attachment depends on VED, the E63 condition exhibited the most uniform coverage after HAp/rGO coating, indicating an improved surface–cell interactions at lower VED. Antibacterial assays showed VED dependence; high‐VED‐E320 samples produced the highest biofilm formation even after coating, whereas low and intermediate VED conditions significantly reduced bacterial adhesion. Overall, biological functionality is observed to be governed by both coating and SLM parameters, with 107 J·mm − 3 offering the best combined structural, cytocompatible, and antibacterial performance.
- 9 May 2026
- Published by Wiley in Advanced Materials Technologies
- Vol. 11 (14)
Programmable Soft Actuators Enabled by Wavelength‐Selective Liquid‐Gas Phase Transition
Soft actuators that operate wirelessly with high spatial and functional programmability are central to the development of next‐generation soft robotic and microfluidic systems. Liquid‐gas phase transition‐driven actuation offers large and rapid deformations, yet its practical implementation remains limited by a lack of spatial selectivity and programmable control. Here, we introduce a wavelength‐selective soft actuation strategy that couples photothermal heating with liquid‐gas phase transitions in hexafluoroisopropanol (HFIP)‐loaded Ecoflex architectures. By incorporating color‐specific acrylic dyes, we engineer spectral matching between the illumination wavelength and the optical absorption spectrum, enabling localized vaporization and efficient pressure generation. The actuation behavior is systematically tuned through dye concentration, solvent loading, and illumination wavelength, achieving reversible elongations exceeding 250% without compromising mechanical integrity. Beyond fundamental actuation, we demonstrate light‐controlled liquid pumping, sequential fluid release, cargo transport, and on‐demand organic solvent adsorption, all achieved without the need for external pumps, valves, or wiring. This work establishes wavelength‐selective phase‐transition‐driven actuation as a versatile, programmable platform for remotely controlled soft robotics, adaptive microfluidics, and chemical handling systems.
- 9 May 2026
- Published by Wiley in Advanced Materials Technologies
- Vol. 11 (14)
Programmable Soft Actuators Enabled by Wavelength‐Selective Liquid‐Gas Phase Transition
Soft actuators that operate wirelessly with high spatial and functional programmability are central to the development of next‐generation soft robotic and microfluidic systems. Liquid‐gas phase transition‐driven actuation offers large and rapid deformations, yet its practical implementation remains limited by a lack of spatial selectivity and programmable control. Here, we introduce a wavelength‐selective soft actuation strategy that couples photothermal heating with liquid‐gas phase transitions in hexafluoroisopropanol (HFIP)‐loaded Ecoflex architectures. By incorporating color‐specific acrylic dyes, we engineer spectral matching between the illumination wavelength and the optical absorption spectrum, enabling localized vaporization and efficient pressure generation. The actuation behavior is systematically tuned through dye concentration, solvent loading, and illumination wavelength, achieving reversible elongations exceeding 250% without compromising mechanical integrity. Beyond fundamental actuation, we demonstrate light‐controlled liquid pumping, sequential fluid release, cargo transport, and on‐demand organic solvent adsorption, all achieved without the need for external pumps, valves, or wiring. This work establishes wavelength‐selective phase‐transition‐driven actuation as a versatile, programmable platform for remotely controlled soft robotics, adaptive microfluidics, and chemical handling systems.
- Open Access
- 25 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 10459
Magnetic and pneumatic actuation of polymeric microneedles for plasmonic hot-spot engineering and molecular sensing
Soft actuators offer dynamic control of plasmonic particle gaps for hot-spot engineering, yet their potential remains underexplored. Here, we demonstrate two polymeric microneedle platforms designed for precise hot-spot generation and molecular sensing. The first employs magnetic actuation, embedding Fe particles into microneedles to enable reversible deformation under magnetic fields, with stable performance over 1000 cycles. Decorating these structures with silver nanoparticles yields strong surface-enhanced Raman scattering amplification. The second utilizes pneumatic actuation with polydimethylsiloxane microneedles, providing greater flexibility and tip contact area under negative pressure. When functionalized with gold nanoparticles, the microneedles achieve ~3.0-fold higher Raman signals than magnetic counterparts. To demonstrate multifunctionality, we integrate independent vacuum sources and a robotic arm for cargo transport and selective molecular detection. These dynamic microneedle platforms overcome limitations of conventional approaches and offer programmable, tunable, and scalable solutions for plasmon-enhanced sensing in diverse real-world applications.
- 25 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 10459
Open AccessMagnetic and pneumatic actuation of polymeric microneedles for plasmonic hot-spot engineering and molecular sensing
Soft actuators offer dynamic control of plasmonic particle gaps for hot-spot engineering, yet their potential remains underexplored. Here, we demonstrate two polymeric microneedle platforms designed for precise hot-spot generation and molecular sensing. The first employs magnetic actuation, embedding Fe particles into microneedles to enable reversible deformation under magnetic fields, with stable performance over 1000 cycles. Decorating these structures with silver nanoparticles yields strong surface-enhanced Raman scattering amplification. The second utilizes pneumatic actuation with polydimethylsiloxane microneedles, providing greater flexibility and tip contact area under negative pressure. When functionalized with gold nanoparticles, the microneedles achieve ~3.0-fold higher Raman signals than magnetic counterparts. To demonstrate multifunctionality, we integrate independent vacuum sources and a robotic arm for cargo transport and selective molecular detection. These dynamic microneedle platforms overcome limitations of conventional approaches and offer programmable, tunable, and scalable solutions for plasmon-enhanced sensing in diverse real-world applications.
- Open Access
- 11 September 2025
- Published by Royal Society of Chemistry (RSC) in RSC Applied Polymers
- Vol. 3 (6) , 1553-1563
Light-induced foldable materials with 3D-gold nanorod assemblies enable large area plasmonic hot-spot generations
Programmable foldable materials integrated with 3D-gold nanorod assemblies provide scalable plasmonic hot-spot engineering for enhanced SERS and real-world molecular sensing.
- 11 September 2025
- Published by Royal Society of Chemistry (RSC) in RSC Applied Polymers
- Vol. 3 (6) , 1553-1563
Open AccessLight-induced foldable materials with 3D-gold nanorod assemblies enable large area plasmonic hot-spot generations
Programmable foldable materials integrated with 3D-gold nanorod assemblies provide scalable plasmonic hot-spot engineering for enhanced SERS and real-world molecular sensing.
- 29 November 2024
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 2 (12) , 2551-2558
Anisotropic Gold Nanorod Arrays for Plasmon-Enhanced Electrochemical Sensing
- 29 November 2024
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 2 (12) , 2551-2558
Anisotropic Gold Nanorod Arrays for Plasmon-Enhanced Electrochemical Sensing
- 11 September 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (38) , 15276-15309
Organic and inorganic semiconducting materials-based SERS: recent developments and future prospects
Surface-enhanced Raman spectroscopy (SERS) with high sensitivity/selectivity is a powerful analytical tool and has been widely used, particularly in the fields of chemistry, spectroscopy, molecular detection, food safety, anti-counterfeiting, and environmental monitoring. Conventional SERS detection relies on plasmonic materials (e.g., Au and Ag nanostructures) with exceedingly high enhancement factors up to 1012. However, these substrates encounter significant limitations, including poor reproducibility, high cost, lack of selectivity, limited SERS active area leading to inconsistent field enhancement and SERS signals, and the possibility of the photothermal decomposition of the analyte species. These drawbacks have the potential to impede detection accuracy and hinder large-scale practical applications. This review focuses on alternative approaches based on noble metal-free SERS substrates. Considering recent advancements in the field of SERS active platforms, we first introduce the implementation of the inorganic compounds, including metal oxides, transition-metal sulfides/-selenides/-tellurides, 2-D layered transition-metal carbides and nitrides (Mxenes), metal-organic frameworks (MOFs), and single elemental inorganic materials for Raman signal enhancement applications. In the second part of the review, we highlight the fast-growing field of SERS-active organic platforms. Moreover, we discuss the promises and challenges for the future direction of organic and inorganic materials-based SERS.
- 11 September 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (38) , 15276-15309
Organic and inorganic semiconducting materials-based SERS: recent developments and future prospects
Surface-enhanced Raman spectroscopy (SERS) with high sensitivity/selectivity is a powerful analytical tool and has been widely used, particularly in the fields of chemistry, spectroscopy, molecular detection, food safety, anti-counterfeiting, and environmental monitoring. Conventional SERS detection relies on plasmonic materials (e.g., Au and Ag nanostructures) with exceedingly high enhancement factors up to 1012. However, these substrates encounter significant limitations, including poor reproducibility, high cost, lack of selectivity, limited SERS active area leading to inconsistent field enhancement and SERS signals, and the possibility of the photothermal decomposition of the analyte species. These drawbacks have the potential to impede detection accuracy and hinder large-scale practical applications. This review focuses on alternative approaches based on noble metal-free SERS substrates. Considering recent advancements in the field of SERS active platforms, we first introduce the implementation of the inorganic compounds, including metal oxides, transition-metal sulfides/-selenides/-tellurides, 2-D layered transition-metal carbides and nitrides (Mxenes), metal-organic frameworks (MOFs), and single elemental inorganic materials for Raman signal enhancement applications. In the second part of the review, we highlight the fast-growing field of SERS-active organic platforms. Moreover, we discuss the promises and challenges for the future direction of organic and inorganic materials-based SERS.
- 6 August 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (33) , 44105-44113
Magnetically Controllable Paper-Based Soft Robots for Colorimetric Detection of Heavy Metal Ions
Magnetically controllable soft robots are of great interest because they have unique properties compared with conventional rigid counterparts and can be used in diverse applications such as intelligent electronics, bionics, personalized medicine, and cargo grasping. However, the fabrication of such multifunctional soft robots has been challenging because of the integration of dissimilar materials into the robot body. Herein, we designed and fabricated a soft robotic multifunctional system using conventional papers and elastomeric polymers for the colorimetric detection of heavy metal ions (Hg2+ and Fe3+) in water samples. The magnetic actuation of the platforms was shown to correlate with the type of underlying paper and magnetic particle content in the mixtures. Moreover, it was observed that actuation can also be manipulated by controlling the magnetic field strength. A proof-of-concept robotic paper-based Hg2+, Zn2+, and Fe3+ ion detection was demonstrated by combining colorimetric paper sensors and magneto-papers. Our study highlights the significant potential of paper as a material for the fabrication of effective and multifunctional untethered soft robots.
- 6 August 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (33) , 44105-44113
Magnetically Controllable Paper-Based Soft Robots for Colorimetric Detection of Heavy Metal Ions
Magnetically controllable soft robots are of great interest because they have unique properties compared with conventional rigid counterparts and can be used in diverse applications such as intelligent electronics, bionics, personalized medicine, and cargo grasping. However, the fabrication of such multifunctional soft robots has been challenging because of the integration of dissimilar materials into the robot body. Herein, we designed and fabricated a soft robotic multifunctional system using conventional papers and elastomeric polymers for the colorimetric detection of heavy metal ions (Hg2+ and Fe3+) in water samples. The magnetic actuation of the platforms was shown to correlate with the type of underlying paper and magnetic particle content in the mixtures. Moreover, it was observed that actuation can also be manipulated by controlling the magnetic field strength. A proof-of-concept robotic paper-based Hg2+, Zn2+, and Fe3+ ion detection was demonstrated by combining colorimetric paper sensors and magneto-papers. Our study highlights the significant potential of paper as a material for the fabrication of effective and multifunctional untethered soft robots.
- Open Access
- 2 August 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (32) , 34650-34660
Toward Water and Oil Repellent Coating: Synthesis of Fluorinated Methacrylate-Glycidyl Methacrylate Copolymers
The development of durable and eco-friendly coatings with excellent adhesion and remarkable surface properties remains a critical pursuit in various industries. This study introduces an innovative methodology for the synthesis of glycidyl methacrylate-co-fluorinated methacrylate (P(GMA-co-FMA)) random copolymers with variable fluorine contents derived from GMA and FMA monomers. The copolymerization of these constituents yields coatings with enhanced durability and unique surface characteristics. Particularly, the incorporation of FMA introduces novel surface functionalities, leading to high water and oil repellent properties. The copolymer-coated surfaces exhibited impressive water contact angles ranging from 105° to 125° and decane contact angles ranging from 50° to 85°. The wettability of the P(GMA-co-FMA) coatings demonstrated a strong dependence on the fluorine content in the copolymers, with higher fluorine content resulting in superior water and oil repellency. Through a comprehensive characterization, we demonstrate the exceptional adhesion and self-cleaning capabilities of the fabricated films. Notably, the self-cleaning efficacy of P(GMA-co-FMA)-coated surfaces persists even following a prolonged duration of 6 months. Furthermore, our investigation reveals the influence of copolymer composition on surface wettability and contact angle hysteresis, providing valuable insights for tailoring coating properties. Overall, the novelty of this study lies in the synthesis of P(GMA-co-FMA) copolymer coatings with superior adhesion and self-cleaning properties. These advancements present promising applications in various fields, including electronics, textiles, and medical supplies, where such durable and functional coatings can significantly enhance product performance and longevity.
- 2 August 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (32) , 34650-34660
Open AccessToward Water and Oil Repellent Coating: Synthesis of Fluorinated Methacrylate-Glycidyl Methacrylate Copolymers
The development of durable and eco-friendly coatings with excellent adhesion and remarkable surface properties remains a critical pursuit in various industries. This study introduces an innovative methodology for the synthesis of glycidyl methacrylate-co-fluorinated methacrylate (P(GMA-co-FMA)) random copolymers with variable fluorine contents derived from GMA and FMA monomers. The copolymerization of these constituents yields coatings with enhanced durability and unique surface characteristics. Particularly, the incorporation of FMA introduces novel surface functionalities, leading to high water and oil repellent properties. The copolymer-coated surfaces exhibited impressive water contact angles ranging from 105° to 125° and decane contact angles ranging from 50° to 85°. The wettability of the P(GMA-co-FMA) coatings demonstrated a strong dependence on the fluorine content in the copolymers, with higher fluorine content resulting in superior water and oil repellency. Through a comprehensive characterization, we demonstrate the exceptional adhesion and self-cleaning capabilities of the fabricated films. Notably, the self-cleaning efficacy of P(GMA-co-FMA)-coated surfaces persists even following a prolonged duration of 6 months. Furthermore, our investigation reveals the influence of copolymer composition on surface wettability and contact angle hysteresis, providing valuable insights for tailoring coating properties. Overall, the novelty of this study lies in the synthesis of P(GMA-co-FMA) copolymer coatings with superior adhesion and self-cleaning properties. These advancements present promising applications in various fields, including electronics, textiles, and medical supplies, where such durable and functional coatings can significantly enhance product performance and longevity.
- Open Access
- 1 June 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 9 (17)
Magnetically Actuated GelMA‐Based Scaffolds as a Strategy to Generate Complex Bioprinted Tissues
The 3D bioprinting of complex structures has attracted particular attention in recent years and has been explored in several fields, including dentistry, pharmaceutical technology, medical devices, and tissue/organ engineering. However, it still possesses major challenges, such as decreased cell viability due to the prolongation of the printing time, along with difficulties in preserving the print shape. The 4D bioprinting approach, which is based on controlled shape transformation upon stimulation after 3D bioprinting, is a promising innovative method to overcome these difficulties. Herein, the generation of skeletal muscle tissue‐like complex structures is demonstrated by 3D bioprinting of GelMA‐based C2C12 mouse myoblast‐laden bio‐ink on a polymeric magnetic actuator that enables on‐demand shape transformation (i.e., rolling motion) under a magnetic field. Bioprinted scaffolds are used in both unrolled (open as control) and rolled forms. The results indicate that C2C12s remain viable upon controlled shape transformation, and functional myotube formation is initiated by the 7th day within bioprinted platforms. Moreover, when the rolled and open groups are compared regarding MyoD1 staining intensity, the rolled one enhanced MyoD1 expression. These results provide a promising methodology for generating complex structures with a simple magnetic actuation procedure for the bioprinting of tissue‐engineered constructs with enhanced cell viability and functionality.
- 1 June 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 9 (17)
Open AccessMagnetically Actuated GelMA‐Based Scaffolds as a Strategy to Generate Complex Bioprinted Tissues
The 3D bioprinting of complex structures has attracted particular attention in recent years and has been explored in several fields, including dentistry, pharmaceutical technology, medical devices, and tissue/organ engineering. However, it still possesses major challenges, such as decreased cell viability due to the prolongation of the printing time, along with difficulties in preserving the print shape. The 4D bioprinting approach, which is based on controlled shape transformation upon stimulation after 3D bioprinting, is a promising innovative method to overcome these difficulties. Herein, the generation of skeletal muscle tissue‐like complex structures is demonstrated by 3D bioprinting of GelMA‐based C2C12 mouse myoblast‐laden bio‐ink on a polymeric magnetic actuator that enables on‐demand shape transformation (i.e., rolling motion) under a magnetic field. Bioprinted scaffolds are used in both unrolled (open as control) and rolled forms. The results indicate that C2C12s remain viable upon controlled shape transformation, and functional myotube formation is initiated by the 7th day within bioprinted platforms. Moreover, when the rolled and open groups are compared regarding MyoD1 staining intensity, the rolled one enhanced MyoD1 expression. These results provide a promising methodology for generating complex structures with a simple magnetic actuation procedure for the bioprinting of tissue‐engineered constructs with enhanced cell viability and functionality.
- Open Access
- 22 March 2024
- Published by American Chemical Society (ACS) in ACS Materials Au
- Vol. 4 (4) , 385-392
Light- and Solvent-Responsive Bilayer Hydrogel Actuators with Reversible Bending Behaviors
Light-responsive hydrogel systems have gained significant attention due to their unique ability to undergo controlled and reversible swelling behavior in response to light stimuli. Combining light-responsive hydrogels with nonresponsive polymers offers a unique self-folding feature that can be used in soft robotic actuator designs. However, simple formulation of such systems with rapid response time is still a challenging task. Herein, we demonstrate a simple but versatile bilayer polymeric design combining light-responsive spiropyran-polyacrylamide (SP-PAAm) with polyacrylamide (PAAm) hydrogels. The photochromic spiropyran in our polymer design is a closed-ring, hydrophobic compound and turns into an open-ring, hydrophilic merocyanine isomer under light irradiation. The swelling degree of SP-PAAm and PAAm hydrogels was evaluated using LED lights with different wavelengths and solvent media (e.g., water, ethanol, DMF, and DMSO). We observed that SP-PAAm hydrogels reached a swelling ratio of ∼370% with the illumination of the blue LED in the DMF medium. By combining light-responsive SP-PAAm hydrogels with nonresponsive PAAm, a proof-of-concept demonstration was performed to demonstrate the applicability of our fabricated platforms. Although fabricated one-armed bilayer hydrogels possessed self-folding ability with a folding angle of ∼40° in 30 min, the four-armed bilayer platforms demonstrated more efficient and rapid folding behavior and reached a folding angle of ∼75° in ∼15 min. Given their simplicity and efficiency, we believe that such polymeric designs may offer new avenues for the fields of polymeric actuators and soft robotic systems.
- 22 March 2024
- Published by American Chemical Society (ACS) in ACS Materials Au
- Vol. 4 (4) , 385-392
Open AccessLight- and Solvent-Responsive Bilayer Hydrogel Actuators with Reversible Bending Behaviors
Light-responsive hydrogel systems have gained significant attention due to their unique ability to undergo controlled and reversible swelling behavior in response to light stimuli. Combining light-responsive hydrogels with nonresponsive polymers offers a unique self-folding feature that can be used in soft robotic actuator designs. However, simple formulation of such systems with rapid response time is still a challenging task. Herein, we demonstrate a simple but versatile bilayer polymeric design combining light-responsive spiropyran-polyacrylamide (SP-PAAm) with polyacrylamide (PAAm) hydrogels. The photochromic spiropyran in our polymer design is a closed-ring, hydrophobic compound and turns into an open-ring, hydrophilic merocyanine isomer under light irradiation. The swelling degree of SP-PAAm and PAAm hydrogels was evaluated using LED lights with different wavelengths and solvent media (e.g., water, ethanol, DMF, and DMSO). We observed that SP-PAAm hydrogels reached a swelling ratio of ∼370% with the illumination of the blue LED in the DMF medium. By combining light-responsive SP-PAAm hydrogels with nonresponsive PAAm, a proof-of-concept demonstration was performed to demonstrate the applicability of our fabricated platforms. Although fabricated one-armed bilayer hydrogels possessed self-folding ability with a folding angle of ∼40° in 30 min, the four-armed bilayer platforms demonstrated more efficient and rapid folding behavior and reached a folding angle of ∼75° in ∼15 min. Given their simplicity and efficiency, we believe that such polymeric designs may offer new avenues for the fields of polymeric actuators and soft robotic systems.