Myoung-Ho Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Myoung-Ho Kim has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Seong Min Kim
Department of Agricultural Convergence Technology, Graduate School, Jeonbuk National University, Jeonju 54896, Korea
5 shared publications - Gyu Gang Han
Department of Agricultural Convergence Technology, Graduate School, Jeonbuk National University, Jeonju 54896, Korea
4 shared publications - Jun Hyuk Jeon
Department of Agricultural Machinery Engineering, Graduate School, Jeonbuk National University, Jeonju 54896, Korea
4 shared publications - Yongjin Cho
Department of Bioindustrial Machinery Engineering, Jeonbuk National University, Jeonju 54896, Republic of Korea
4 shared publications - Dae-Cheol Kim
Department of Bioindustrial Machinery Engineering, Jeonbuk National University, Jeonju 54896, Korea
2 shared publications - Seo-Yong Shin
Department of Bioindustrial Machinery Engineering, Jeonbuk National University, Jeonju 54896, Korea
2 shared publications
Latest Publications
- Open Access
- 14 September 2023
- Published by MDPI AG in Agriculture
- Vol. 13 (9) , 1811
Estimation of Air Pollutant Emissions by Tractor Utilization in Korea
The utilization of tractors is essential because of both the shortage of agricultural labor forces and the rapid aging of farmers in Korean agriculture. Tractors can be classified into two types: a walking tractor called as a power tiller, and a riding tractor. In this study, diesel emission inventories of tractors were established and variations of air pollutants were analyzed with each other using 2011 and 2019 survey data in Korea. Agricultural tractors including walking and riding types, which were categorized into three levels via the rated output power, were the main sources of diesel emissions. The emission inventory including CO, NOx, SOx, TSP(PM10), PM2.5, VOCs, and NH3 were established using a Tier 3 methodology. The total amount of emissions using agricultural tractors was decreased by about 13% from 2011 to 2019. The number of walking tractors were decreased by about 19% in 8 years; on the other hand, that of riding tractors were increased by about 12%. However, the emission reduction is about 48% for walking tractors, and the emission increment is about 5% for riding tractors. Thus, the total emission from agricultural tractors was decreased by about 16% in those periods. It is due to the decrease of 21% and 15% in the hours of use of walking and riding tractors, respectively, in 2019. Walking tractors mainly emit air pollutants from spraying and transporting. Riding tractors emit about 61% of the total air pollutants mainly from soil preparation and transporting operations. The geographic information system (GIS) was used to visualize the distribution of air pollutants in Korea. High-emission generating regions and the changes of emissions over 8 years were clearly seen in the GIS analysis. High air-pollutant emitting regions are mainly located in the western and southern regions of Korea, which have plenty of arable areas compared to other regions in Korea.
- 14 September 2023
- Published by MDPI AG in Agriculture
- Vol. 13 (9) , 1811
Open AccessEstimation of Air Pollutant Emissions by Tractor Utilization in Korea
The utilization of tractors is essential because of both the shortage of agricultural labor forces and the rapid aging of farmers in Korean agriculture. Tractors can be classified into two types: a walking tractor called as a power tiller, and a riding tractor. In this study, diesel emission inventories of tractors were established and variations of air pollutants were analyzed with each other using 2011 and 2019 survey data in Korea. Agricultural tractors including walking and riding types, which were categorized into three levels via the rated output power, were the main sources of diesel emissions. The emission inventory including CO, NOx, SOx, TSP(PM10), PM2.5, VOCs, and NH3 were established using a Tier 3 methodology. The total amount of emissions using agricultural tractors was decreased by about 13% from 2011 to 2019. The number of walking tractors were decreased by about 19% in 8 years; on the other hand, that of riding tractors were increased by about 12%. However, the emission reduction is about 48% for walking tractors, and the emission increment is about 5% for riding tractors. Thus, the total emission from agricultural tractors was decreased by about 16% in those periods. It is due to the decrease of 21% and 15% in the hours of use of walking and riding tractors, respectively, in 2019. Walking tractors mainly emit air pollutants from spraying and transporting. Riding tractors emit about 61% of the total air pollutants mainly from soil preparation and transporting operations. The geographic information system (GIS) was used to visualize the distribution of air pollutants in Korea. High-emission generating regions and the changes of emissions over 8 years were clearly seen in the GIS analysis. High air-pollutant emitting regions are mainly located in the western and southern regions of Korea, which have plenty of arable areas compared to other regions in Korea.
- Open Access
- 16 June 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (12) , 6134
CFD Analysis and Validation of a Foreign Material Winnowing Machine for Pepper Harvester
The winnowing machine of chili pepper harvesters was developed to reduce the potential problem of low pepper stem and fruit separation. The developed winnowing machine was combined with two impellers and a center bearing to prevent a strain on the drive shaft and to ensure durability. The terminal velocity of chili pepper was measured, and an aerodynamic analysis was conducted based on this winnowing machine. A CFD (Computational Fluid Dynamics, Ansys Fluent 2020 R1) analysis was conducted for three levels of discharge port guide form (0, 3, and 5 guides) and three levels of rotating speed (1600, 1800, and 2000 RPM) of a winnowing machine designed utilizing aerodynamic analysis results. A validation test was conducted by fabricating a winnower test device. As for aerodynamic analysis conducted using measured values of terminal velocity, chili pepper fruits were collected at an outlet wind speed lower than 17.5 m/s and chili pepper branches were separated at a speed higher than 12.5 m/s. As a result of CFD analysis, the wind speed deviation at outlets of the 0-, 3-, and 5-guide depending on the rotating speed appeared to be 15.8, 1.4, and 1.0 m/s on average, respectively. The result of the CFD analysis showed values higher than wind speeds of the actual winnower test device by a minimum of 0 and a maximum of 2.4 m/s. Through the CFD analysis and the wind speed validation test of the winnower test device, optimal conditions to separate foreign materials were found to be a winnowing machine at a rotating speed of 1800 RPM with a discharge port having three guides or a winnowing machine at a rotating speed of 2000 RPM with a discharge port having five guides.
- 16 June 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (12) , 6134
Open AccessCFD Analysis and Validation of a Foreign Material Winnowing Machine for Pepper Harvester
The winnowing machine of chili pepper harvesters was developed to reduce the potential problem of low pepper stem and fruit separation. The developed winnowing machine was combined with two impellers and a center bearing to prevent a strain on the drive shaft and to ensure durability. The terminal velocity of chili pepper was measured, and an aerodynamic analysis was conducted based on this winnowing machine. A CFD (Computational Fluid Dynamics, Ansys Fluent 2020 R1) analysis was conducted for three levels of discharge port guide form (0, 3, and 5 guides) and three levels of rotating speed (1600, 1800, and 2000 RPM) of a winnowing machine designed utilizing aerodynamic analysis results. A validation test was conducted by fabricating a winnower test device. As for aerodynamic analysis conducted using measured values of terminal velocity, chili pepper fruits were collected at an outlet wind speed lower than 17.5 m/s and chili pepper branches were separated at a speed higher than 12.5 m/s. As a result of CFD analysis, the wind speed deviation at outlets of the 0-, 3-, and 5-guide depending on the rotating speed appeared to be 15.8, 1.4, and 1.0 m/s on average, respectively. The result of the CFD analysis showed values higher than wind speeds of the actual winnower test device by a minimum of 0 and a maximum of 2.4 m/s. Through the CFD analysis and the wind speed validation test of the winnower test device, optimal conditions to separate foreign materials were found to be a winnowing machine at a rotating speed of 1800 RPM with a discharge port having three guides or a winnowing machine at a rotating speed of 2000 RPM with a discharge port having five guides.
- Open Access
- 1 December 2021
- Published by MDPI AG in Preprints.org
Comparison of Diesel Tractor Emissions in Korea
Due to the shortage of agricultural labor forces and rapid aging of farmers, the utilization of tractors is becoming popular and essential in Korea. Tractors can be classified into two types, a walking tractor called as a power tiller and a riding tractor. In this study, agricultural tractors including walking and riding types were categorized into 4 levels by rated output power. And diesel emission inventory of tractors was established and analyzed using 2011 and 2019 survey data in Korea. Emission inventory including CO, NOx, SOx, TSP(PM10), PM2.5, VOCs and NH3 were established using Tier 3 methodology. The total amount of emission using agricultural tractors was decreased about 13% from 2011 to 2019. The number of walking tractors were decreased by about 19% in 8 years, on the other hand that of riding tractors were increased by about 12%. However, the emission reduction is about 48% for walking tractors and the emission increment is about 5% for riding tractors. Thus, the total emission from agricultural tractors was decreased by about 16% in those periods. It is due to the decrease of 21% and 15% in the hours of use of walking and riding tractors, respectively, in 2019. Walking tractors mainly emit air pollutants from spraying and transporting. Riding tractors mainly 61% of total air pollutants emits from soil preparation and transporting operations. Geographic information system (GIS) was used to spatially assign air pollutants variables into 17 provinces and metropolitan cities in Korea. High emission generating regions and changes of emissions during 8 years were clearly seen in GIS analysis. High air pollutant emitting regions are mainly located in the western and southern regions of Korea, which have plenty of arable areas compared to other regions in Korea.
- 1 December 2021
- Published by MDPI AG in Preprints.org
Open AccessComparison of Diesel Tractor Emissions in Korea
Due to the shortage of agricultural labor forces and rapid aging of farmers, the utilization of tractors is becoming popular and essential in Korea. Tractors can be classified into two types, a walking tractor called as a power tiller and a riding tractor. In this study, agricultural tractors including walking and riding types were categorized into 4 levels by rated output power. And diesel emission inventory of tractors was established and analyzed using 2011 and 2019 survey data in Korea. Emission inventory including CO, NOx, SOx, TSP(PM10), PM2.5, VOCs and NH3 were established using Tier 3 methodology. The total amount of emission using agricultural tractors was decreased about 13% from 2011 to 2019. The number of walking tractors were decreased by about 19% in 8 years, on the other hand that of riding tractors were increased by about 12%. However, the emission reduction is about 48% for walking tractors and the emission increment is about 5% for riding tractors. Thus, the total emission from agricultural tractors was decreased by about 16% in those periods. It is due to the decrease of 21% and 15% in the hours of use of walking and riding tractors, respectively, in 2019. Walking tractors mainly emit air pollutants from spraying and transporting. Riding tractors mainly 61% of total air pollutants emits from soil preparation and transporting operations. Geographic information system (GIS) was used to spatially assign air pollutants variables into 17 provinces and metropolitan cities in Korea. High emission generating regions and changes of emissions during 8 years were clearly seen in GIS analysis. High air pollutant emitting regions are mainly located in the western and southern regions of Korea, which have plenty of arable areas compared to other regions in Korea.
- Open Access
- 1 December 2021
- Published by MDPI AG in Agriculture
- Vol. 11 (12) , 1208
Analysis of Air Pollutant Emissions for Mechanized Rice Cultivation in Korea
In Korea, rice is a major staple grain and it is mainly cultivated using various types of agricultural machinery. Air pollutants emitted from agricultural machinery have their origins mainly from the exhaustion of internal combustion engines. In this study, the emission characteristics of five main air pollutants by the European Environment Agency’s Tier 1 method for rice cultivation were analyzed. Diesel is a main fuel for agricultural machinery and gasoline is generally used only for rice transplanters as a fuel in Korea. Tractors consume 46% of total fuel consumption and 56% of diesel fuel consumption. Gasoline used for rice transplanters accounts for about 17% of the total fuel consumption each year. Tractors and rice transplanters emit 82% of all total pollutants. From 2011 to 2019, the total amount of air pollutant emissions decreased by 15%. That accounted for the reduction of rice cultivation fields in those periods. Rice transplanting operation accounts for 42% of total emissions. Then, harrowing, harvesting, tilling, leveling, and pest control operations generated 10%, 10%, 8%, 8%, and 7% of total emissions, respectively. The contribution of each air pollutant held 54% of CO, 39% of NOx, 5% of NMVOC, and 2% of TSP from the total emission inventory. The three major regions emitting air pollutants from mechanized agricultural practices were Jeollanam-do, Chungcheongnam-do, and Jeollabuk-do, which consume 55% of the total fuel usage in rice farming. The total amount of air pollutant emissions from rice cultivation practices in 2019 was calculated as 8448 tons in Korea.
- 1 December 2021
- Published by MDPI AG in Agriculture
- Vol. 11 (12) , 1208
Open AccessAnalysis of Air Pollutant Emissions for Mechanized Rice Cultivation in Korea
In Korea, rice is a major staple grain and it is mainly cultivated using various types of agricultural machinery. Air pollutants emitted from agricultural machinery have their origins mainly from the exhaustion of internal combustion engines. In this study, the emission characteristics of five main air pollutants by the European Environment Agency’s Tier 1 method for rice cultivation were analyzed. Diesel is a main fuel for agricultural machinery and gasoline is generally used only for rice transplanters as a fuel in Korea. Tractors consume 46% of total fuel consumption and 56% of diesel fuel consumption. Gasoline used for rice transplanters accounts for about 17% of the total fuel consumption each year. Tractors and rice transplanters emit 82% of all total pollutants. From 2011 to 2019, the total amount of air pollutant emissions decreased by 15%. That accounted for the reduction of rice cultivation fields in those periods. Rice transplanting operation accounts for 42% of total emissions. Then, harrowing, harvesting, tilling, leveling, and pest control operations generated 10%, 10%, 8%, 8%, and 7% of total emissions, respectively. The contribution of each air pollutant held 54% of CO, 39% of NOx, 5% of NMVOC, and 2% of TSP from the total emission inventory. The three major regions emitting air pollutants from mechanized agricultural practices were Jeollanam-do, Chungcheongnam-do, and Jeollabuk-do, which consume 55% of the total fuel usage in rice farming. The total amount of air pollutant emissions from rice cultivation practices in 2019 was calculated as 8448 tons in Korea.
- Open Access
- 27 October 2021
- Published by MDPI AG in Preprints.org
Analysis of Air Pollutant Emissions for Mechanized Rice Cultivation in Korea
In Korea, rice is a major staple grain and is mainly cultivated using various agricultural machinery. Air pollutants emitted from agricultural machinery have their origins mainly from the exhaustion of internal combustion engines. In this study, emission characteristics of five main air pollutants by European Environment Agency's Tier 1 method for rice cultivation was analyzed. Diesel is a main fuel for agricultural machinery and gasoline is generally used only for rice transplanters as a fuel in Korea. Tractors consume 46% of total fuel consumption and 56% of diesel fuel consumption. Gasoline used for rice transplanters accounts for 17% of total fuel consumption each year. Tractors and rice transplanters are emitting 82% of all total pollutants. From 2011 to 2019, the total amount of air pollutant emissions was decrease by 15%. That accounted for the reduction of rice cultivation fields in those periods. Rice transplanting operation was in charge of 42% of total emissions. Then, harrowing, harvesting, tilling, leveling, and pest control operations generated 10%, 10%, 8%, 8% and 7% of total emissions, respectively. The contribution of each air pollutant held 54% of CO, 39% of NOx, 5% of NMVOC, and 2% of TSP from the total emission inventory. The three major regions emitting air pollutants from mechanized agricultural practices were Jeollanam-do, Chungcheongnam-do, and Jeollabuk-do, which consume 55% of total fuel usage in rice farming. The total amount of air pollutant emissions from rice cultivation practices in 2019 was calculated as 8,448 Mg in Korea.
- 27 October 2021
- Published by MDPI AG in Preprints.org
Open AccessAnalysis of Air Pollutant Emissions for Mechanized Rice Cultivation in Korea
In Korea, rice is a major staple grain and is mainly cultivated using various agricultural machinery. Air pollutants emitted from agricultural machinery have their origins mainly from the exhaustion of internal combustion engines. In this study, emission characteristics of five main air pollutants by European Environment Agency's Tier 1 method for rice cultivation was analyzed. Diesel is a main fuel for agricultural machinery and gasoline is generally used only for rice transplanters as a fuel in Korea. Tractors consume 46% of total fuel consumption and 56% of diesel fuel consumption. Gasoline used for rice transplanters accounts for 17% of total fuel consumption each year. Tractors and rice transplanters are emitting 82% of all total pollutants. From 2011 to 2019, the total amount of air pollutant emissions was decrease by 15%. That accounted for the reduction of rice cultivation fields in those periods. Rice transplanting operation was in charge of 42% of total emissions. Then, harrowing, harvesting, tilling, leveling, and pest control operations generated 10%, 10%, 8%, 8% and 7% of total emissions, respectively. The contribution of each air pollutant held 54% of CO, 39% of NOx, 5% of NMVOC, and 2% of TSP from the total emission inventory. The three major regions emitting air pollutants from mechanized agricultural practices were Jeollanam-do, Chungcheongnam-do, and Jeollabuk-do, which consume 55% of total fuel usage in rice farming. The total amount of air pollutant emissions from rice cultivation practices in 2019 was calculated as 8,448 Mg in Korea.
- Open Access
- 15 October 2021
- Published by MDPI AG in Engineering Proceedings
- Vol. 11 (1) , 17
Analysis of Air Pollutant Emission Inventory from Farm Tractor Operations in Korea
Due to the decline in the agricultural labor force and rapid aging of farmers, agricultural machinery is becoming larger, higher-performance, and diversified. In this study, an air pollutant emission inventory for agricultural tractors was analyzed and compared with the inventory developed by a national agency. Agricultural tractors include walking and riding tractors and, further, riding tractors were divided into three subcategories based on their engine size. In addition, tractor emissions were classified according to the usage time of each operation. Seven air pollutants, such as CO, NOx, SOx, TSP, VOCs (PM10), PM2.5, and NH3, were included in the inventory. The results showed that the total yearly emissions in 2017 were 3300 Mg, 9110 Mg, 4 Mg, 567 Mg, 522 Mg, 759 Mg, and 33 Mg for CO, NOx, SOx, TSP, VOCs, PM10, PM2.5, and NH3, respectively. The most emitted air pollutant in the transporting operation using walking tractors is NOx, and the amount of emission is 1023 Mg/y. Riding tractors mainly emit a large amount of NOx, in the order of medium, large, and small tractors. The NOx emissions from medium, large, and small riding tractors are 1103 Mg/y, 676 Mg/y, and 322 Mg/y, respectively, from harrowing operations and are 445 Mg/y, 273 Mg/y, and 130 Mg/y, respectively, from tilling operations. The results also showed that the total pollutant emissions from tractors were increased 10% compared to the emission inventory developed by a national agency due to categorizing riding tractors into three subcategories. A geographic information system (GIS) was used to spatially assign air pollutant variables to 17 provinces and metropolitan cities in Korea.
- 15 October 2021
- Published by MDPI AG in Engineering Proceedings
- Vol. 11 (1) , 17
Open AccessAnalysis of Air Pollutant Emission Inventory from Farm Tractor Operations in Korea
Due to the decline in the agricultural labor force and rapid aging of farmers, agricultural machinery is becoming larger, higher-performance, and diversified. In this study, an air pollutant emission inventory for agricultural tractors was analyzed and compared with the inventory developed by a national agency. Agricultural tractors include walking and riding tractors and, further, riding tractors were divided into three subcategories based on their engine size. In addition, tractor emissions were classified according to the usage time of each operation. Seven air pollutants, such as CO, NOx, SOx, TSP, VOCs (PM10), PM2.5, and NH3, were included in the inventory. The results showed that the total yearly emissions in 2017 were 3300 Mg, 9110 Mg, 4 Mg, 567 Mg, 522 Mg, 759 Mg, and 33 Mg for CO, NOx, SOx, TSP, VOCs, PM10, PM2.5, and NH3, respectively. The most emitted air pollutant in the transporting operation using walking tractors is NOx, and the amount of emission is 1023 Mg/y. Riding tractors mainly emit a large amount of NOx, in the order of medium, large, and small tractors. The NOx emissions from medium, large, and small riding tractors are 1103 Mg/y, 676 Mg/y, and 322 Mg/y, respectively, from harrowing operations and are 445 Mg/y, 273 Mg/y, and 130 Mg/y, respectively, from tilling operations. The results also showed that the total pollutant emissions from tractors were increased 10% compared to the emission inventory developed by a national agency due to categorizing riding tractors into three subcategories. A geographic information system (GIS) was used to spatially assign air pollutant variables to 17 provinces and metropolitan cities in Korea.
- Open Access
- 3 October 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (19) , 9225
Performance Testing and Evaluation of Drum-Type Stem-Separation Device for Pepper Harvester
The chili pepper harvester has shown potential problems of low pepper stem separation and a high pepper damage rate. The low pepper stem separation has required additional labor, which consists of separating the pepper and stem after pepper harvesting. To improve the stem separation and sorting function of pepper harvesters, three-shaft and four-shaft drum-type stem-separation devices were manufactured, and performance tests were conducted to assess these devices. In an attempt to reduce the damage rate, a brush was used as the teeth in the drum-type stem-separation device. In the factor test, the rotational speeds of shaft 1(A), shaft 2(B), shaft 3(C), and the conveyor for the three-shaft drum were 0.9, 2.7, 1.3, and 0.5 m/s, respectively. The rotational speed of the four-shaft drum was the same as that of the three-shaft drum except for shaft 4(D), and the rotational speed of this additional D was set to 1.3 m/s, which was the same as that of C. In the non-moving status during the non-picking operation of the pepper harvester, the average stem-separation efficiency (SSE) of the four-shaft drum increased by 1.2%, the average pepper with twig rate (PTR) decreased by 5.9%, and the average damage rate (DR) increased by 3.7% compared to the three-shaft drum. In the moving status during the picking operation of the pepper harvester, the SSE of the four-shaft drum increased by 3.6%, the PTR decreased by 9.1%, and the DR increased by 3.8% compared to the three-shaft drum, so an improvement in the pepper stem-separation capacity was observed.
- 3 October 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (19) , 9225
Open AccessPerformance Testing and Evaluation of Drum-Type Stem-Separation Device for Pepper Harvester
The chili pepper harvester has shown potential problems of low pepper stem separation and a high pepper damage rate. The low pepper stem separation has required additional labor, which consists of separating the pepper and stem after pepper harvesting. To improve the stem separation and sorting function of pepper harvesters, three-shaft and four-shaft drum-type stem-separation devices were manufactured, and performance tests were conducted to assess these devices. In an attempt to reduce the damage rate, a brush was used as the teeth in the drum-type stem-separation device. In the factor test, the rotational speeds of shaft 1(A), shaft 2(B), shaft 3(C), and the conveyor for the three-shaft drum were 0.9, 2.7, 1.3, and 0.5 m/s, respectively. The rotational speed of the four-shaft drum was the same as that of the three-shaft drum except for shaft 4(D), and the rotational speed of this additional D was set to 1.3 m/s, which was the same as that of C. In the non-moving status during the non-picking operation of the pepper harvester, the average stem-separation efficiency (SSE) of the four-shaft drum increased by 1.2%, the average pepper with twig rate (PTR) decreased by 5.9%, and the average damage rate (DR) increased by 3.7% compared to the three-shaft drum. In the moving status during the picking operation of the pepper harvester, the SSE of the four-shaft drum increased by 3.6%, the PTR decreased by 9.1%, and the DR increased by 3.8% compared to the three-shaft drum, so an improvement in the pepper stem-separation capacity was observed.