Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Thara Reshma I. V. has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The influence of moisture ingression on mechanical and vibrational properties of basalt, glass, and hybrid fiber-epoxy composites

    by Dayananda Pai, Jibin Jacob John, Sriharsha Hegde, I. V. Thara Reshma, N. H. Padmaraj

    Basalt fiber, a natural and eco-friendly reinforcement, has demonstrated superior properties compared with conventional synthetic fibers. This study investigates the effect of ageing on the mechanical and vibrational properties of Basalt/Epoxy, Glass/Epoxy, and Basalt-Glass/Epoxy hybrid composites. Laminates were fabricated using vacuum bagging, ensuring uniform fiber-matrix volume fractions, and then exposed to ageing in seawater, tap water, and distilled water for a duration of 80 days. The moisture absorption pattern followed Fickian diffusion, with seawater exhibiting the highest diffusion coefficients owing to matrix breakdown and osmotic influences. Tensile tests demonstrated a decrease in failure stress and modulus for all materials after ageing, with Glass/Epoxy composites experiencing the most notable degradation despite absorbing less moisture, indicating a weakening of the fiber-matrix interfacial bond. The hybrid laminates exhibited moderate tensile and vibrational characteristics and maintained mechanical performance better in harsh environments. Free vibration tests showed that the natural frequency diminished as mass increased due to moisture absorption, while damping factors rose after ageing. Overall, the combination of basalt and glass fibers enhanced environmental resilience, indicating their suitability for structural applications under challenging conditions.

  • Open Access

    Aerodynamic Performance Assessment of Multiple Car Body Configurations: A Comparative Study

    by Clayton Valenko Fernandes, Padmaraj N H, Thara Reshma I V, Chethan K N, Divya D Shetty, Laxmikant G Keni

    This study presents a comparative computational fluid dynamics (CFD) investigation of the aerodynamic performance of four simplified crossover/sports utility vehicle (SUV)-type vehicle body configurations. The models were developed with systematic geometric variations, including front face inclination, roof spoiler length, roof spoiler slotting, and rear underbody diffuser integration. Steady-state Reynolds-averaged Navier–Stokes (RANS) simulations using the k–ω SST turbulence model were conducted in ANSYS Fluent to evaluate key aerodynamic parameters, including the drag coefficient, drag force, pressure distribution, velocity field, and modeled turbulence kinetic energy. The results indicate that the baseline configuration exhibits the highest drag due to early flow separation and poor rear pressure recovery. Progressive geometric modifications led to improved aerodynamic performance, with the configuration incorporating a slotted roof spoiler and rear diffuser achieving the lowest drag coefficient, corresponding to an approximate 13% reduction compared to the baseline model. The findings demonstrate that coordinated front- and rear-end design modifications play a critical role in reducing wake intensity and enhancing aerodynamic efficiency. This study provides insight into effective drag reduction strategies for crossover-type vehicles and highlights the importance of integrated aerodynamic design approaches.

  • Open Access

    Thermal Influence on the Mechanical Performance and Deformation Characteristics of Symmetric and Asymmetric GFRP Laminates

    by Juveriya Sayyed, Prashantha Acharya, Sriharsha Hegde, Gururaj Bolar, Manjunath Shetty, Thara Reshma I. V., Padmaraj N. H.

    The present study investigated the tensile behavior, failure mechanisms and deformation characteristics of glass fiber-reinforced polymer (GFRP) composites with symmetric [0°/90°/90°/0°] and asymmetric [0°/90°/0°/90°] stacking sequences across a temperature range of 30–150 °C. Tensile testing revealed superior mechanical performance in the symmetric lay-up, with higher tensile strength and failure strain sustained across elevated temperatures. Failure mode analysis revealed a transition from ductile failure to brittle failure with increasing temperature, which was more pronounced in the asymmetric lay-up, along with increased delamination and reduced fiber pull-out. Failure surface examination supported these findings, revealing better interfacial bonding and matrix integrity in the symmetric lay-up. Deformation analysis further confirmed a more homogeneous distribution of strain and longer failure time in symmetric laminates. Across all the metrics, including toughness, energy absorption, and strain uniformity, the symmetric configuration outperformed the asymmetric counterpart, underscoring the critical role of balanced stacking in enhancing the thermal durability. The observed temperature-induced degradation and its impact on mechanical and failure behavior emphasize the need for temperature-sensitive design strategies in GFRP-based structures.


  • Planar Shock Wave Moving Over a Double Concave Ramp

    by Sai Sharan Khandavilli, Karthik Chilkuri Reddy, I. V. Thara Reshma

  • Flow regimes in the evolution of a hot buoyant vortex dipole

    by V. Praveen Kumar, Kanak Agarwal, A. Sameen, I. V. Thara Reshma

    Vortices and vortex dipoles play a critical role in turbulence, facilitating scalar mixing, diffusion, and energy dissipation. When a temperature gradient is present, buoyancy effects become significant, and buoyant vortices and dipoles emerge as characteristic features of such flows. In this study, we examine the evolution of a buoyant vortex dipole (BVD) arising from a temperature difference between the vortex dipole and the surrounding fluid. Using the Oberbeck–Boussinesq approximation, we derive the governing equations in non-dimensional form to capture the essential physics. The computational domain is periodic, and simulations are performed using the open-source spectral solver Dedalus. The interplay of thermal diffusion, viscous diffusion, and buoyancy drives the evolution of various coherent structures. Based on these interactions, we identify four distinct topological features and classify the evolution of the BVD into six regimes: (a) thermal diffusion-dominated regime, (b) viscous diffusion-dominated regime, (c) balanced diffusion regime, (d) weak wake street regime, (e) buoyancy-driven transition regime, and (f) multiple tertiary wakes regime. This classification provides a comprehensive framework to understand the dynamics of BVDs under varying physical influences.

  • Open Access

    Experimental and Numerical Study for Estimation and Reduction of The Blind Spot in A Passenger Car

    by Thara Reshma I. V., Mohammad Zuber, Shlok Gupta, Akhil Agarwal, Sharun Hegde, Chethan K N

    The purpose of developing an automobile was to reduce human effort, travel faster, and cover longer distances. Cars were meant for transporting a small number of people from one point to another. In India, the four-wheeler segment has picked up over the years due to economic liberalization. The vehicles have been undergoing constant improvements. This may be either in the design or the final product. Also, the importance of aerodynamics is a crucial factor considered while designing a vehicle. This study focuses on improving the aerodynamics of the side-view mirror and reducing the blind spot region. The side mirror of Toyota Etios Liva was used in this study. Blind spots were first determined, and the mirror drag is analyzed experimentally in a wind tunnel and numerically using commercial software. The results show that the drag value of the new mirror was 0.449 compared to 0.634 of the original mirror. This work helps to reduce the blind spot region of the car considered for the study.