WDWasif Abu Dujana

Wasif Abu Dujana

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Wasif Abu Dujana has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Computational investigation of perovskite hydrides XLiH 3 (X = Fe, Co, Ni) for solid-state hydrogen storage

    by Wasif Abu Dujana, Md Saiduzzaman, Mohammad Shahariar Kabir, Hanan Al-Ghamdi, Hesham M. Enshasy, Shima Sadaf, Dhuha Salah Aldaham, Mir Waqas Alam

    In this study, three novel perovskite compounds XLiH 3 (X [Formula: see text] Fe, Co, Ni) have been investigated for H 2 storage applications. DFT is incorporated to predict the structural, electronic, thermal, mechanical, and optical properties for hydrogen storage applications. The compounds were optimized at every stage of the study, and a cubic phase was observed for all compounds under the simulation criteria. Negative formation energies confirm the thermodynamic stability of the hydrides. All three compounds also satisfy mechanical stability criteria. From the band structure, it was confirmed that the hydrides are metallic, as calculated using both the GGA-PBE and HSE06 functionals. Hardness, machinability index, and fracture toughness were calculated for all three compounds; FeLiH 3 exhibited the highest fracture toughness. The optical absorption peak indicates strong absorption in the visible and near-UV range for all three compounds. In the lower-energy range, the compounds showed a sharp peak in optical conductivity. The gravimetric H 2 storage capacities of the XLiH 3 (X [Formula: see text] Fe, Co, Ni) hydrides are 4.59%, 4.39%, and 4.41%, respectively. The volumetric H 2 storage capacities are 187.70, 181.30, and 171.10[Formula: see text]g[Formula: see text]H 2 /L, respectively. The thermodynamic desorption temperatures for FeLiH 3 , CoLiH 3 , and NiLiH 3 are 293.811, 303.471, and 298.280 K, respectively.

  • Open Access

    Hydrogen Storage Properties of XFe 3 H 8 Hydrides: A First‐Principles Study

    by Wasif Abu Dujana, Md Saiduzzaman, Tasdid Bin Kabir, Tahani Mohammed Alrosaa, Reda A. Haggam, Raghad Radi Al Rasheed, Amani Mubarak Al‐Farhan, Zakia Hassan Alhashem, Mohammed Albossed, Shima Sadaf, et al.

    The current work provides the first‐principles exploration of the XFe 3 H 8 (X = Li, Na, K, and Rb) perovskite hydrides series. The negative formation energies confirm the thermodynamic stability of the entire XFe 3 H 8 series. Electronic band structures and density of states (DOS) analyses reveal the metallic nature of all compounds for both GGA and HSE06 functionals. The dynamic stability is confirmed by the positive phonon curves. Elastic constants satisfy Born stability criteria, with mechanical analysis indicating that all four hydrides show ductile behavior that suggest potential use of the compounds in flexible devices. The XFe 3 H 8 (X = Li, Na, K, and Rb) hydrides' exhibit gravimetric H 2 storage capacities of 4.42, 4.06, 3.76, and 3.09 wt.%, respectively demonstrating that LiFe 3 H 8 provides the highest capacity and superior performance in the series. The resulting volumetric H 2 storage capacities are 207.92, 187.98, 167.09, and 156.11 gH 2 /L respectively for XFe 3 H 8 (X = Li, Na, K, and Rb) hydrides.

  • Open Access

    Data‐Driven Insights Into Feature Engineering and Efficiency Prediction in Lead‐Free Rb‐Based Perovskite Solar Cells

    by Ashir Hasan Nibir, Mohammad Borhan Uddin, Arpon Podder, Usama Ahmed, Md. Saif Hasan, Wasif Abu Dujana

    Lead‐free perovskite solar cells (PSCs) require systematic identification of device parameters that govern their performance. Here, a machine learning (ML)‐assisted SCAPS‐1D framework is developed to analyze and optimize the simulated performance of RbGeI 3 ‐based PSCs across different transport‐layer configurations. Random forest (RF) and Decision Tree (DT) models exhibited the strongest 10‐fold cross‐validation (CV) performance, with R 2 values of 0.9843 ± 0.0044 and 0.9774 ± 0.0079, respectively. SHapley Additive exPlanations (SHAP) analysis identified active‐layer thickness as the dominant predictor of power conversion efficiency (PCE), followed by hole‐transport layer (HTL)‐related parameters and operating temperature. Systematic electron‐transport layer (ETL)/HTL screening identified CuSbS 2 as a promising HTL, yielding a maximum simulated PCE of 28.32% within the investigated parameter space. Importantly, held‐out ETL/HTL tests revealed substantial variation in out‐of‐distribution (OOD) generalization, demonstrating that high random CV accuracy does not necessarily translate to reliable prediction of unseen material combinations. The results establish an interpretable computational framework for parameter screening and device optimization of RbGeI 3 ‐based PSCs, while highlighting the need for experimental and independent computational validation.

  • Open Access

    Carbon‐Based Material–Reinforced MMC Processed by Powder Metallurgy: A Review of Fabrication Challenges and Property Enhancements

    by Wasif Abu Dujana, Md. Arafat Rahman, Md. Saif Hasan

    A promising method for creating lightweight, strong, and multipurpose materials for cutting‐edge engineering applications is the reinforcement of carbon‐based materials into metal matrix composites (MMCs). This review provides a thorough overview of carbon‐based reinforcements, including carbon nanotubes (CNTs), graphene, graphene oxide, and graphite, integrated into four metallic matrices such as aluminum, magnesium, copper, and titanium using powder metallurgy. These four matrices were selected due to their extensive research coverage and superior potential for structural, thermal, tribological, and biomedical applications. The review primarily covers studies published between 2020 and 2026, supplemented by key earlier works for highlighting the evolution of fabrication techniques, properties, and performance. The effects of carbon nanostructures on the microstructure and properties are critically analyzed. Improved strength and hardness are reported for aluminum matrices. Homogeneous dispersion is limited by the low wettability and oxidation of Mg‐based MMCs. Despite issues such as carbide production and interfacial incompatibility, titanium systems exhibit notable gains in both thermal stability and mechanical strength. Copper matrices show superior electrical and thermal conductivity upon carbon addition. The review emphasizes reinforcement integrity and uniform dispersion during processing. Important research gaps and future directions are finally outlined, with an emphasis on improving interfacial bonding, managing reaction kinetics, and creating innovative hybrid reinforcement techniques.

  • Open Access

    MXene as Promising Anode Material for High-Performance Lithium-Ion Batteries: A Comprehensive Review

    by Mohammad Nezam Uddin Chy, Arafat Rahman, Jin-Hyuk Kim, Nirjhor Barua, Wasif Abu Dujana

    Broad adoption has already been started of MXene materials in various energy storage technologies, such as super-capacitors and batteries, due to the increasing versatility of the preparation methods, as well as the ongoing discovery of new members. The essential requirements for an excellent anode material for lithium-ion batteries (LIBs) are high safety, minimal volume expansion during the lithiation/de-lithiation process, high cyclic stability, and high Li+ storage capability. However, most of the anode materials for LIBs, such as graphite, SnO2, Si, Al, and Li4Ti5O12, have at least one issue. Hence, creating novel anode materials continues to be difficult. To date, a few MXenes have been investigated experimentally as anodes of LIBs due to their distinct active voltage windows, large power capabilities, and longer cyclic life. The objective of this review paper is to provide an overview of the synthesis and characterization characteristics of the MXenes as anode materials of LIBs, including their discharge/charge capacity, rate performance, and cycle ability. In addition, a summary of the potential outlook for developments of these materials as anodes is provided.


  • Open Access

    First-principle investigations of pressure effect on optical properties of SrPuO 3

    by Wasif Abu Dujana, Ovijit Das, Arpon Podder, Masum Rana Pramanik

    The study discusses the pressure-induced behavior of structural and optical properties of rare earth metal cubic perovskite SrPuO3. The lattice parameter is found 4.33 Å, which agrees with other studies and the bulk modulus of the structure is 157.989 GPa. First-principle computation shows that the value of dielectric constants falls drastically in the visible range. With increasing pressure, there is a significant increase in absorption and conductivity of the material. These increases occur inside the visible range, promoting the material to be used as optoelectronic devices. Reflectivity and refractive index under pressure is found to be high for the red light and low for the violet zone. Again, these start to increase for additional frequencies. The frequency-dependent loss function is also described in work.

  • Open Access

    Structural, electronic, mechanical, thermal, and optical properties of UIr3 under pressure: A comprehensive DFT study

    by Wasif Abu Dujana, Arpon Podder, Ovijit Das, Solayman, M. T. Nasir, M. A. Rashid, Saiduzzaman, M. A. Hadi

    First-principles density functional theory calculations were performed to assess the pressure effect on structural, electronic, mechanical, thermal, and optical properties of cubic intermetallic UIr3. The calculated lattice parameter deviates from the experimental value by 0.40%, indicating the reliability of the present study. The obtained lattice constant decreases at a constant rate with pressure over the entire pressure range. The band structure and Fermi surface disclose the metallic nature of UIr3. The external pressure suppresses the overlapping between the valence and conduction bands and reduces the total density of state at the Fermi level. The pseudogap moves to the left from the Fermi level with increasing pressure, which indicates a decrease in the structural stability of UIr3. Peaks in the valence band move toward deeper energy positions when the external pressure is increased from 0 to 25 GPa, indicating the increase in the covalency of UIr3. Contour maps of charge density and Mulliken population analysis imply that UIr3 has also partial ionic and covalent nature in chemical bonding. In the considered pressure range, UIr3 maintains its mechanical and dynamical stability as well as ductility and machinability. The elastic anisotropic level of UIr3 increases slightly with fluctuations above the pressure of 5 GPa. Shape change in UIr3 will be more difficult due to the increase in shear modulus and microhardness under the external pressure. Thermal properties of UIr3 are favorable for being a promising thermal barrier coating material, and optical reflectivity makes it a potential candidate material for coating to diminish solar heating.