Alexander Petrus van Bavel
Alexander Petrus van Bavel has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Asma Marzouk
Texas A&M University at Qatar, Chemical Engineering Program 1 , Education City, P.O. Box 23874, Doha
2 shared publications - G. Leendert Bezemer
Shell Global Solutions International B.V., Amsterdam, The Netherlands
2 shared publications - Ioannis George Economou
Chemical Engineering Program, Texas A&M University at Qatar, PO Box 23874, Doha, Qatar
2 shared publications - Konstantinos D. Papavasileiou
Department of ChemoInformatics, Novamechanics Ltd., Nicosia 1070, Cyprus
2 shared publications - Loukas D. Peristeras
Molecular Thermodynamics and Modeling of Materials Laboratory, Institute of Nanoscience and Nanotechnology
2 shared publications - Prathamesh M. Shenai
Shell India Markets Pvt. Ltd. 4 , Mahadeva Kodigehalli, Bangalore 562149
2 shared publications
Latest Publications
- Open Access
- 13 September 2026
- Published by Elsevier in SSRN Electronic Journal
Design and scale-up investigation of a Joule-heated steam methane reforming reactor using first principles
Electrification of conventionally fired chemical reactors is emerging as a viable pathway toward decarbonizing industrial processes, offering reduced CO$_2$ emissions together with flexible and compact heat-generation capabilities. Joule-heated catalytic reactors are a promising route to electrify high-temperature endothermic processes. However, their design remains largely empirical as the coupled electrical, thermal, flow, and reaction phenomena that govern them are not well characterized. This work develops a one-dimensional multiphysics model of a Joule-heated tubular steam methane reformer in which the reactor wall serves as both a resistive heating element and a catalyst support. The model resolves the underlying physico-chemical processes in a fully coupled manner and is validated against reported experiments on an electrically heated tubular reformer. Scaling analysis of the governing equations identifies the dimensionless groups that control reactor behavior. We show that the dimensionless solid-fluid thermal coupling parameter distinguishes mass-transfer-controlled operation from thermally controlled operation. This criterion clarifies which resistance limits conversion at a given scale and provides the basis for scale-up rules relating tube length, diameter, wall thickness, and applied power. Finally, the ability of Joule heating to impose a spatially varying power input is examined by comparing uniform and non-uniform axial power profiles. Redistributing the same total power along the tube reshapes the temperature profile, offsets the endothermic cold spot near the inlet, and alters methane conversion and hydrogen productivity in a Joule-heated reactor. Spatial power distribution acts as an additional design variable for electrified reactors.
- 13 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDesign and scale-up investigation of a Joule-heated steam methane reforming reactor using first principles
Electrification of conventionally fired chemical reactors is emerging as a viable pathway toward decarbonizing industrial processes, offering reduced CO$_2$ emissions together with flexible and compact heat-generation capabilities. Joule-heated catalytic reactors are a promising route to electrify high-temperature endothermic processes. However, their design remains largely empirical as the coupled electrical, thermal, flow, and reaction phenomena that govern them are not well characterized. This work develops a one-dimensional multiphysics model of a Joule-heated tubular steam methane reformer in which the reactor wall serves as both a resistive heating element and a catalyst support. The model resolves the underlying physico-chemical processes in a fully coupled manner and is validated against reported experiments on an electrically heated tubular reformer. Scaling analysis of the governing equations identifies the dimensionless groups that control reactor behavior. We show that the dimensionless solid-fluid thermal coupling parameter distinguishes mass-transfer-controlled operation from thermally controlled operation. This criterion clarifies which resistance limits conversion at a given scale and provides the basis for scale-up rules relating tube length, diameter, wall thickness, and applied power. Finally, the ability of Joule heating to impose a spatially varying power input is examined by comparing uniform and non-uniform axial power profiles. Redistributing the same total power along the tube reshapes the temperature profile, offsets the endothermic cold spot near the inlet, and alters methane conversion and hydrogen productivity in a Joule-heated reactor. Spatial power distribution acts as an additional design variable for electrified reactors.
- 23 October 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (16)
Multi-scale study of cobalt adsorption on TiO2 anatase (101): From DFT to force-field parameterization
Understanding metal–support interactions (MSI) is critical for designing stable and efficient catalysts, such as cobalt catalysts on TiO2, commonly employed in Fischer–Tropsch synthesis. This study investigates cobalt adsorption on the TiO2 anatase (101) surface through a computational approach, combining density functional theory (DFT), ab initio molecular dynamics (AIMD) simulation, and genetic algorithm-based force field parameterization. It is shown that Co clusters get substantially oxidized due to interaction with oxygen atoms of the support. The parameterization of Morse potential force field is achieved using an automated and combined genetic algorithm (GA) - molecular dynamics (MD) simulation approach, leveraging AIMD simulations to capture the dynamic nature of MSI effectively in the training dataset. This method incorporates simulations with the Large-scale Atomic/Molecular Massively Parallel Simulator into the GA framework, thereby streamlining the optimization process for the force field, facilitating an efficient exploration of the parameter space. This new force field, validated against DFT results, offers an efficient tool for modeling MSI at larger length scales and longer timescales. Our findings highlight how MSI influences cobalt cluster stability, electron transfer, and surface restructuring, directly impacting catalytic performance and resistance to sintering. The methodology presented in this study offers a versatile framework that can be adapted to other metal–support systems with system-specific reparameterization and validation, enabling comprehensive investigation of mesoscale MSI studies on explicit oxide surfaces, facilitating further advances in heterogeneous catalysis research and applications. The findings highlight the influence of MSI on cobalt cluster stability, electron transfer, and surface reconstruction, all of which are crucial to catalytic activity and sintering resistance.
- 23 October 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (16)
Multi-scale study of cobalt adsorption on TiO2 anatase (101): From DFT to force-field parameterization
Understanding metal–support interactions (MSI) is critical for designing stable and efficient catalysts, such as cobalt catalysts on TiO2, commonly employed in Fischer–Tropsch synthesis. This study investigates cobalt adsorption on the TiO2 anatase (101) surface through a computational approach, combining density functional theory (DFT), ab initio molecular dynamics (AIMD) simulation, and genetic algorithm-based force field parameterization. It is shown that Co clusters get substantially oxidized due to interaction with oxygen atoms of the support. The parameterization of Morse potential force field is achieved using an automated and combined genetic algorithm (GA) - molecular dynamics (MD) simulation approach, leveraging AIMD simulations to capture the dynamic nature of MSI effectively in the training dataset. This method incorporates simulations with the Large-scale Atomic/Molecular Massively Parallel Simulator into the GA framework, thereby streamlining the optimization process for the force field, facilitating an efficient exploration of the parameter space. This new force field, validated against DFT results, offers an efficient tool for modeling MSI at larger length scales and longer timescales. Our findings highlight how MSI influences cobalt cluster stability, electron transfer, and surface restructuring, directly impacting catalytic performance and resistance to sintering. The methodology presented in this study offers a versatile framework that can be adapted to other metal–support systems with system-specific reparameterization and validation, enabling comprehensive investigation of mesoscale MSI studies on explicit oxide surfaces, facilitating further advances in heterogeneous catalysis research and applications. The findings highlight the influence of MSI on cobalt cluster stability, electron transfer, and surface reconstruction, all of which are crucial to catalytic activity and sintering resistance.
- Open Access
- 24 May 2024
- Published by Wiley in Journal of Computational Chemistry
- Vol. 45 (25) , 2153-2166
A systematic DFT study of structure and electronic properties of titanium dioxide
DFT functionals are of paramount importance for an accurate electronic and structural description of transition metal systems. In this work, a systematic analysis using some well-known and commonly used DFT functionals is performed. A comparison of the structural and energetic parameters calculated with the available experimental data is made in order to find the adequate functional for an accurate description of the TiO2 bulk and surface of both anatase and rutile structures. In the absence of experimental data on the surface energy, the theoretical predictions obtained using the high-accuracy HSE06 functional were used as a reference to compare against the surface energy values calculated with the other DFT functionals. A clear improvement in the electronic description of both anatase and rutile was observed by introducing the Hubbard U correction term to PBE, PW91, and OptPBE functionals. The OptPBE-U4 functional was found to offer a good compromise between accurately describing the structural and electronic properties of titania.
- 24 May 2024
- Published by Wiley in Journal of Computational Chemistry
- Vol. 45 (25) , 2153-2166
Open AccessA systematic DFT study of structure and electronic properties of titanium dioxide
DFT functionals are of paramount importance for an accurate electronic and structural description of transition metal systems. In this work, a systematic analysis using some well-known and commonly used DFT functionals is performed. A comparison of the structural and energetic parameters calculated with the available experimental data is made in order to find the adequate functional for an accurate description of the TiO2 bulk and surface of both anatase and rutile structures. In the absence of experimental data on the surface energy, the theoretical predictions obtained using the high-accuracy HSE06 functional were used as a reference to compare against the surface energy values calculated with the other DFT functionals. A clear improvement in the electronic description of both anatase and rutile was observed by introducing the Hubbard U correction term to PBE, PW91, and OptPBE functionals. The OptPBE-U4 functional was found to offer a good compromise between accurately describing the structural and electronic properties of titania.
- Open Access
- 29 September 2021
- Published by Elsevier in The Innovation
- Vol. 2 (4) , 100170
Direct conversion of CO2 to a jet fuel over CoFe alloy catalysts
- 29 September 2021
- Published by Elsevier in The Innovation
- Vol. 2 (4) , 100170
Open AccessDirect conversion of CO2 to a jet fuel over CoFe alloy catalysts
- Open Access
- 10 March 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (36) , 8012-8016
Non‐oxidative Methane Coupling over Silica versus Silica‐Supported Iron(II) Single Sites
Non‐oxidative CH4 coupling is promoted by silica with incorporated iron sites, but the role of these sites and their speciation under reaction conditions are poorly understood. Here, silica‐supported iron(II) single sites, prepared via surface organometallic chemistry and stable at 1020 °C in vacuum, are shown to rapidly initiate CH4 coupling at 1000 °C, leading to 15–22 % hydrocarbons selectivity at 3–4 % conversion. During this process, iron reduces and forms carburized iron(0) nanoparticles. This reactivity contrasts with what is observed for (iron‐free) partially dehydroxylated silica, that readily converts methane, albeit with low hydrocarbon selectivity and after an induction period. This study supports that iron sites facilitate faster initiation of radical reactions and tame the surface reactivity.
- 10 March 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (36) , 8012-8016
Open AccessNon‐oxidative Methane Coupling over Silica versus Silica‐Supported Iron(II) Single Sites
Non‐oxidative CH4 coupling is promoted by silica with incorporated iron sites, but the role of these sites and their speciation under reaction conditions are poorly understood. Here, silica‐supported iron(II) single sites, prepared via surface organometallic chemistry and stable at 1020 °C in vacuum, are shown to rapidly initiate CH4 coupling at 1000 °C, leading to 15–22 % hydrocarbons selectivity at 3–4 % conversion. During this process, iron reduces and forms carburized iron(0) nanoparticles. This reactivity contrasts with what is observed for (iron‐free) partially dehydroxylated silica, that readily converts methane, albeit with low hydrocarbon selectivity and after an induction period. This study supports that iron sites facilitate faster initiation of radical reactions and tame the surface reactivity.