Feng-Tao Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Feng-Tao Liu has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Xi-Wen Zhou
Department of Civil and Environmental Engineering The Hong Kong Polytechnic University Kowloon Hong Kong China
4 shared publications - Yan Zhang
Guangxi Key Laboratory of Geomechanics and Geotechnical Engineering, Guilin University of Technology, Guilin, China
3 shared publications Rongtao Yan
2 shared publicationsYin-Fu Jin
2 shared publications- Yin-Fu Jin
College of Civil and Transportation Engineering, Shenzhen University, Shenzhen, China
2 shared publications Zhen-Yu Yin
2 shared publications
Latest Publications
- 23 March 2026
- Published by Wiley in Concurrency and Computation: Practice and Experience
- Vol. 38 (7)
Enhancing Soil Classification With DropKey ‐Augmented Lightweight Transformers
Soil degradation significantly impacts global agricultural productivity, making accurate soil classification crucial for sustainable land management. To address limitations of traditional surveys and computationally intensive models, we propose a lightweight Vision Transformer integrating TinyViT's hierarchical compression with DropKey's dynamic sparse attention. This architecture enables high‐accuracy soil classification suitable for edge computing. A hybrid data augmentation strategy effectively mitigates class imbalance in soil datasets. Evaluation on 1915 soil images shows our model achieves 98.42% accuracy with only 5.40 M parameters and 1.19G FLOPs, outperforming mainstream counterparts. While limited by dataset scale and controlled lighting, DropKey proves particularly effective for soil texture analysis by filtering noise while preserving critical textural boundaries. This framework effectively balances accuracy and efficiency, thereby facilitating deployment on resource‐constrained devices.
- 23 March 2026
- Published by Wiley in Concurrency and Computation: Practice and Experience
- Vol. 38 (7)
Enhancing Soil Classification With DropKey ‐Augmented Lightweight Transformers
Soil degradation significantly impacts global agricultural productivity, making accurate soil classification crucial for sustainable land management. To address limitations of traditional surveys and computationally intensive models, we propose a lightweight Vision Transformer integrating TinyViT's hierarchical compression with DropKey's dynamic sparse attention. This architecture enables high‐accuracy soil classification suitable for edge computing. A hybrid data augmentation strategy effectively mitigates class imbalance in soil datasets. Evaluation on 1915 soil images shows our model achieves 98.42% accuracy with only 5.40 M parameters and 1.19G FLOPs, outperforming mainstream counterparts. While limited by dataset scale and controlled lighting, DropKey proves particularly effective for soil texture analysis by filtering noise while preserving critical textural boundaries. This framework effectively balances accuracy and efficiency, thereby facilitating deployment on resource‐constrained devices.
- 26 July 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 187
Large deformation analysis in geotechnics using the node-based smoothed RPIM and second order cone programming
- 26 July 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 187
Large deformation analysis in geotechnics using the node-based smoothed RPIM and second order cone programming
- 24 January 2025
- Published by Elsevier in Engineering Analysis with Boundary Elements
- Vol. 172
A cell-based smoothed radial point interpolation method applied to lower bound limit analysis of thin plates
- 24 January 2025
- Published by Elsevier in Engineering Analysis with Boundary Elements
- Vol. 172
A cell-based smoothed radial point interpolation method applied to lower bound limit analysis of thin plates
- 8 March 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 61, 1251-1258
A simplified isotropic compression model for methane hydrate-bearing sediment
- 8 March 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 61, 1251-1258
A simplified isotropic compression model for methane hydrate-bearing sediment
- 21 July 2023
- Published by Elsevier in Engineering Analysis with Boundary Elements
- Vol. 155, 888-906
A centroid-enriched strain-smoothed radial point interpolation method for nearly incompressible elastoplastic problems in solid mechanics
- 21 July 2023
- Published by Elsevier in Engineering Analysis with Boundary Elements
- Vol. 155, 888-906
A centroid-enriched strain-smoothed radial point interpolation method for nearly incompressible elastoplastic problems in solid mechanics
- Open Access
- 1 March 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (5) , 4411
Study on Mechanical Properties and Microstructure of Basalt Fiber-Modified Red Clay
The effects of basalt fiber incorporation on the mechanical properties of red clay soils were investigated. Through the direct shear test, unconfined compressive strength test, and microstructure test, the shear strength curves and stress–strain curves of basalt fiber-modified red clay soils were obtained under different basalt fiber incorporation rates and different soil dry density conditions. The results showed that: (1) the shear strength and compressive strength of the soil were significantly increased after the incorporation of basalt fiber; (2) the strength increase was greatest at 0.3% of basalt fiber incorporation, which was the optimum incorporation level; (3) the damage form of the soil changed, and the red clay soil incorporated with basalt fiber changed from brittle damage to ductile damage; and (4) the microscopic electron microscope pictures showed that, at the appropriate amount of fiber incorporation conditions, the fiber bond with the soil particles and form a fiber‒soil column. When subjected to external forces, the discrete fiber‒soil columns interact with each other to form an approximate three-dimensional fiber‒soil network, which acts to restrain the displacement and deformation of the soil particles, which is the main reason for the improved mechanical properties of the improved soil. The experimental research on the improvement of red clay soil with basalt fiber can provide a theoretical basis for engineering practice and help provide an environmentally friendly and efficient method of road base treatment in engineering.
- 1 March 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (5) , 4411
Open AccessStudy on Mechanical Properties and Microstructure of Basalt Fiber-Modified Red Clay
The effects of basalt fiber incorporation on the mechanical properties of red clay soils were investigated. Through the direct shear test, unconfined compressive strength test, and microstructure test, the shear strength curves and stress–strain curves of basalt fiber-modified red clay soils were obtained under different basalt fiber incorporation rates and different soil dry density conditions. The results showed that: (1) the shear strength and compressive strength of the soil were significantly increased after the incorporation of basalt fiber; (2) the strength increase was greatest at 0.3% of basalt fiber incorporation, which was the optimum incorporation level; (3) the damage form of the soil changed, and the red clay soil incorporated with basalt fiber changed from brittle damage to ductile damage; and (4) the microscopic electron microscope pictures showed that, at the appropriate amount of fiber incorporation conditions, the fiber bond with the soil particles and form a fiber‒soil column. When subjected to external forces, the discrete fiber‒soil columns interact with each other to form an approximate three-dimensional fiber‒soil network, which acts to restrain the displacement and deformation of the soil particles, which is the main reason for the improved mechanical properties of the improved soil. The experimental research on the improvement of red clay soil with basalt fiber can provide a theoretical basis for engineering practice and help provide an environmentally friendly and efficient method of road base treatment in engineering.
- Open Access
- 6 December 2022
- Published by Springer Nature in Research Square
Experimental study on the effect of thermal-chemical coupling on tension-shear fracture characteristics of cracked Karst limestone
In the natural environment, the main control structural plane of dangerous rock in karst area is subjected to complex coupling effects of temperature, acid rain and tension-shear force. However, the multi-field coupling effect on the stability of dangerous rocks is still unclear. To further probe this issue, first, the chemical solution immersion tests were carried out at pH of 2, 3, 4, 5 and temperature of 20, 30, 40, 60℃ for pre-cracked limestone, and room temperature rock samples at pH of 7 were used as comparison samples. Second, the tension-shear test on the soaked rock samples were conducted using the self-developed tension-shear test device. The crack propagation and failure modes of tension-shear pre-cracked limestone with different temperatures and pH value solutions were analyzed. Finally, the mineral composition, microstructure and damage degree of different rock samples were tested and analyzed by X-ray diffraction test, SEM test and inductively coupled ion emission spectrometer. The test results show that the temperature and acidity are negatively correlated with the tension-shear strength of limestone. The higher the temperature or acidity, the smaller the ultimate tension-shear peak load. The main mineral composition of limestone is calcite, and the pore size on the rock surface reflects the variation trend of cracking under tension-shear loading. The rock mass loss rate is positively correlated with the temperature and negatively correlated with the pH value, both of which can affect the progress of water rock chemistry and have a certain impact on the degree of rock deterioration.
- 6 December 2022
- Published by Springer Nature in Research Square
Open AccessExperimental study on the effect of thermal-chemical coupling on tension-shear fracture characteristics of cracked Karst limestone
In the natural environment, the main control structural plane of dangerous rock in karst area is subjected to complex coupling effects of temperature, acid rain and tension-shear force. However, the multi-field coupling effect on the stability of dangerous rocks is still unclear. To further probe this issue, first, the chemical solution immersion tests were carried out at pH of 2, 3, 4, 5 and temperature of 20, 30, 40, 60℃ for pre-cracked limestone, and room temperature rock samples at pH of 7 were used as comparison samples. Second, the tension-shear test on the soaked rock samples were conducted using the self-developed tension-shear test device. The crack propagation and failure modes of tension-shear pre-cracked limestone with different temperatures and pH value solutions were analyzed. Finally, the mineral composition, microstructure and damage degree of different rock samples were tested and analyzed by X-ray diffraction test, SEM test and inductively coupled ion emission spectrometer. The test results show that the temperature and acidity are negatively correlated with the tension-shear strength of limestone. The higher the temperature or acidity, the smaller the ultimate tension-shear peak load. The main mineral composition of limestone is calcite, and the pore size on the rock surface reflects the variation trend of cracking under tension-shear loading. The rock mass loss rate is positively correlated with the temperature and negatively correlated with the pH value, both of which can affect the progress of water rock chemistry and have a certain impact on the degree of rock deterioration.