Sarah Berk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sarah Berk has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Manoj Joshi
Centre for Ocean and Atmospheric Sciences University of East Anglia Norwich UK
4 shared publications Clare Goodess
University of East Anglia
3 shared publications- Peer Nowack
Institute of Theoretical Informatics Karlsruhe Institute of Technology Karlsruhe Germany
3 shared publications - Angel Hsu
University of North Carolina at Chapel Hill
2 shared publications Andrew Martin
1 shared publicationAngel Hsu
University of North Carolina at Chapel Hill, Chapel Hill, North Carolina
1 shared publication
Latest Publications
- 1 September 2026
- Published by American Meteorological Society in Bulletin of the American Meteorological Society
- Vol. 107 (9) , E2065-E2093
Biases due to Widespread Use of Low-Cost Sensors for Urban Heat Stress Assessments
Urban heat stress is an area of critical research interest due to its relevance for public health and policy. Given the lack of operational-grade weather stations within cities, different types of low-cost sensors have been used to assess urban heat stress. However, these sensors are traditionally not designed for capturing fine-scale differences in temperature and humidity (i.e., the main components of moist heat), which are expected across a city, and their siting is often suboptimal due to logistical challenges. Here, through several exercises over lawn and rooftop settings using 41 Kestrel sensors, we demonstrate significant issues with the use of such low-cost sensors for urban heat stress assessments. Issues stem from use of sensors without radiation shields and even with cheaper nonaspirated shields, exposure to confounding environmental factors, and local land-cover influences. Unshielded sensors overestimated temperature by up to 0.7°C relative to shielded counterparts. For sensors housed in unaspirated radiation shields, daytime measurement error was strongly correlated with diurnal temperature range (lawn r = 0.86; unshaded rooftop r = 0.97). Humidity cross-sensor variability exhibited a weaker correlation with its diurnal range. Heat index, derived from temperature and humidity, combined biases in the two measurements, magnifying resulting errors (14% higher than standard deviation for temperature). Finally, sensors near anthropogenic heat sources showed cross-sensor variability up to four (temperature) and five (humidity) times higher than interference free sites. Based on these potential mismeasurements in urban heat stress gradients seen using inexpensive sensors, we provide recommendations on their appropriate deployment in urban environments. Significance Statement: Heat stress is a major concern in cities, where temperatures are often higher than in nearby rural areas. To identify which neighborhoods face the greatest risks, communities and researchers have increasingly turned to low-cost sensors to measure temperature and humidity. Our study shows that these low-cost sensors must be used with caution when comparing conditions across a city, especially in hot and humid conditions. Inaccurate readings risk muting or magnifying the true extent of heat exposure and misguiding resilience planning. We highlight the importance of proper shielding and placement of sensors and underscore the need for stricter standards to ensure reliable location-based comparisons of temperature and humidity.
- 1 September 2026
- Published by American Meteorological Society in Bulletin of the American Meteorological Society
- Vol. 107 (9) , E2065-E2093
Biases due to Widespread Use of Low-Cost Sensors for Urban Heat Stress Assessments
Urban heat stress is an area of critical research interest due to its relevance for public health and policy. Given the lack of operational-grade weather stations within cities, different types of low-cost sensors have been used to assess urban heat stress. However, these sensors are traditionally not designed for capturing fine-scale differences in temperature and humidity (i.e., the main components of moist heat), which are expected across a city, and their siting is often suboptimal due to logistical challenges. Here, through several exercises over lawn and rooftop settings using 41 Kestrel sensors, we demonstrate significant issues with the use of such low-cost sensors for urban heat stress assessments. Issues stem from use of sensors without radiation shields and even with cheaper nonaspirated shields, exposure to confounding environmental factors, and local land-cover influences. Unshielded sensors overestimated temperature by up to 0.7°C relative to shielded counterparts. For sensors housed in unaspirated radiation shields, daytime measurement error was strongly correlated with diurnal temperature range (lawn r = 0.86; unshaded rooftop r = 0.97). Humidity cross-sensor variability exhibited a weaker correlation with its diurnal range. Heat index, derived from temperature and humidity, combined biases in the two measurements, magnifying resulting errors (14% higher than standard deviation for temperature). Finally, sensors near anthropogenic heat sources showed cross-sensor variability up to four (temperature) and five (humidity) times higher than interference free sites. Based on these potential mismeasurements in urban heat stress gradients seen using inexpensive sensors, we provide recommendations on their appropriate deployment in urban environments. Significance Statement: Heat stress is a major concern in cities, where temperatures are often higher than in nearby rural areas. To identify which neighborhoods face the greatest risks, communities and researchers have increasingly turned to low-cost sensors to measure temperature and humidity. Our study shows that these low-cost sensors must be used with caution when comparing conditions across a city, especially in hot and humid conditions. Inaccurate readings risk muting or magnifying the true extent of heat exposure and misguiding resilience planning. We highlight the importance of proper shielding and placement of sensors and underscore the need for stricter standards to ensure reliable location-based comparisons of temperature and humidity.
- Open Access
- 4 August 2026
- Published by Wiley
UrbanSENSE: A Stratified Sampling Approach for Balanced Hourly Machine Learning Models of Moist Heat Stress
- 4 August 2026
- Published by Wiley
Open AccessUrbanSENSE: A Stratified Sampling Approach for Balanced Hourly Machine Learning Models of Moist Heat Stress
- Open Access
- 16 July 2026
- Published by Elsevier in SSRN Electronic Journal
Crossing the Threshold: A Global Analysis of 277 Cities Reveals Unequal and Increasing Urban Heat Risk
Understanding the risk of heat to human welfare is imperative for cities to adapt to changing climate conditions. In this paper, we build on existing physiological approaches to measure heat stress, which take into account differences in age, activity level, and underlying climate conditions, to develop a simple, comparable and flexible framework to measure heat stress on an urban scale. We analyze 30 years of climatological data within the administrative boundaries of 277 cities across the globe, reporting results for two age groups (younger and older adults) and two activity levels (no movement and basic daily tasks). Across sampled cities, older adults performing a low-intensity outdoor activity, such as walking, face conditions with uncompensable heat stress an average of 32.9 days per year, compared with 1.3 days per year for younger adults under the same conditions. By contrast, conditions exceed the survivability threshold for older adults at rest in shaded conditions far less frequently, averaging only 0.5 days per year, or roughly an average of one day every two years. Results show a persistent increase in at-risk days for both younger and older adults across all climate zones. While older adults, tropical climate zones, and the peak summer period saw the largest increase in number of at-risk days, younger adults, temperate climate zones, and the late summer period saw the fastest rate of increase. These results provide a nuanced picture of how heat risk is changing across age groups, climate zones, and seasons in 277 global cities, indicating the need for tailored heat adaptation plans in urban areas.
- 16 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCrossing the Threshold: A Global Analysis of 277 Cities Reveals Unequal and Increasing Urban Heat Risk
Understanding the risk of heat to human welfare is imperative for cities to adapt to changing climate conditions. In this paper, we build on existing physiological approaches to measure heat stress, which take into account differences in age, activity level, and underlying climate conditions, to develop a simple, comparable and flexible framework to measure heat stress on an urban scale. We analyze 30 years of climatological data within the administrative boundaries of 277 cities across the globe, reporting results for two age groups (younger and older adults) and two activity levels (no movement and basic daily tasks). Across sampled cities, older adults performing a low-intensity outdoor activity, such as walking, face conditions with uncompensable heat stress an average of 32.9 days per year, compared with 1.3 days per year for younger adults under the same conditions. By contrast, conditions exceed the survivability threshold for older adults at rest in shaded conditions far less frequently, averaging only 0.5 days per year, or roughly an average of one day every two years. Results show a persistent increase in at-risk days for both younger and older adults across all climate zones. While older adults, tropical climate zones, and the peak summer period saw the largest increase in number of at-risk days, younger adults, temperate climate zones, and the late summer period saw the fastest rate of increase. These results provide a nuanced picture of how heat risk is changing across age groups, climate zones, and seasons in 277 global cities, indicating the need for tailored heat adaptation plans in urban areas.
- Open Access
- 3 February 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (6)
Amplified warming in tropical and subtropical cities under 2 °C climate change
Cities are often warmer than rural surroundings due to a phenomenon known as the urban heat island, which can be influenced by various factors, such as regional climate and land surface types. Under climate change, cities face not only the challenge of increasing temperatures in their surrounding hinterland but also the challenge of potential changes in their heat islands. However, even high-resolution global Earth system models (ESMs) with “urban tiles” can only properly resolve the largest urban areas or megacities. Here, we address these limitations by applying a process-based statistical learning model to ESM outputs to provide projections of changes in land surface temperature (LST) for 104 medium-sized cities of population 300 K to 1 M in the subtropics and tropics. Under a 2 °C global warming scenario, annual mean LST in 81% of these cities is projected to increase faster than the surrounding area. In 16% of these cities, mostly in India and China, mean LST is projected to increase by an additional 50-112% above ESM projections of the surrounding area. Our findings underscore the importance of investigating the specific effects of climate change on urban heat exposure.
- 3 February 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (6)
Open AccessAmplified warming in tropical and subtropical cities under 2 °C climate change
Cities are often warmer than rural surroundings due to a phenomenon known as the urban heat island, which can be influenced by various factors, such as regional climate and land surface types. Under climate change, cities face not only the challenge of increasing temperatures in their surrounding hinterland but also the challenge of potential changes in their heat islands. However, even high-resolution global Earth system models (ESMs) with “urban tiles” can only properly resolve the largest urban areas or megacities. Here, we address these limitations by applying a process-based statistical learning model to ESM outputs to provide projections of changes in land surface temperature (LST) for 104 medium-sized cities of population 300 K to 1 M in the subtropics and tropics. Under a 2 °C global warming scenario, annual mean LST in 81% of these cities is projected to increase faster than the surrounding area. In 16% of these cities, mostly in India and China, mean LST is projected to increase by an additional 50-112% above ESM projections of the surrounding area. Our findings underscore the importance of investigating the specific effects of climate change on urban heat exposure.
- Open Access
- 10 July 2024
- Published by Springer Nature in Research Square
Amplified warming in tropical and subtropical cities at 2 °C climate change
Cities are often warmer than rural surroundings due to a phenomenon known as the urban heat island, which can be influenced by various factors, such as regional climate. Under climate change, cities face not only the challenge of increasing temperatures in their surrounding hinterland, but also the challenge of potential changes in their heat islands. Making projections of future climate at the city scale is difficult given limitations of Earth System Model (ESMs), which has limited studies to a small number of urban areas – mostly megacities. Here, we address these limitations by applying a novel process-based machine learning model to ESM outputs, to provide projections of changes in land surface temperature (LST) for 104 medium-sized cities (population 300K to 1M) in the subtropics and tropics. Under a 2°C global warming scenario, annual mean LST in 81% of these cities is projected to increase faster than the surrounding area. In 16% of these cities, mostly in India and China, mean LST is projected to increase by an additional 50–112% above ESM projections of the surrounding area. These findings suggest that the potential impacts of climate change are underestimated at present for millions of people in cities.
- 10 July 2024
- Published by Springer Nature in Research Square
Open AccessAmplified warming in tropical and subtropical cities at 2 °C climate change
Cities are often warmer than rural surroundings due to a phenomenon known as the urban heat island, which can be influenced by various factors, such as regional climate. Under climate change, cities face not only the challenge of increasing temperatures in their surrounding hinterland, but also the challenge of potential changes in their heat islands. Making projections of future climate at the city scale is difficult given limitations of Earth System Model (ESMs), which has limited studies to a small number of urban areas – mostly megacities. Here, we address these limitations by applying a novel process-based machine learning model to ESM outputs, to provide projections of changes in land surface temperature (LST) for 104 medium-sized cities (population 300K to 1M) in the subtropics and tropics. Under a 2°C global warming scenario, annual mean LST in 81% of these cities is projected to increase faster than the surrounding area. In 16% of these cities, mostly in India and China, mean LST is projected to increase by an additional 50–112% above ESM projections of the surrounding area. These findings suggest that the potential impacts of climate change are underestimated at present for millions of people in cities.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
How will the Surface Urban Heat Island respond to changes in climate?
The Surface Urban Heat Island (SUHI), known as the difference in land surface temperature (LST) created by the presence of a city, is impacted by both the climate and morphology of the city in question. Subsequently, a changing climate would be expected to result in consequences for characteristics of the SUHI. Modelling the future climate of cities remains a challenge as resolution of global climate models is too coarse to capture the scale of a city, and regional climate models are computationally expensive. In order to address these issues, statistical models can be used. Using a dataset of cities selected based on similar characteristics such as population, variation of elevation within the city and surrounding area, and proximity to water bodies, satellite data is used to quantify the SUHI magnitude. A statistical model is fitted to current observations using predictive variables based on climate. The model shows promising performance for the majority of cities in the dataset and results are discussed.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessHow will the Surface Urban Heat Island respond to changes in climate?
The Surface Urban Heat Island (SUHI), known as the difference in land surface temperature (LST) created by the presence of a city, is impacted by both the climate and morphology of the city in question. Subsequently, a changing climate would be expected to result in consequences for characteristics of the SUHI. Modelling the future climate of cities remains a challenge as resolution of global climate models is too coarse to capture the scale of a city, and regional climate models are computationally expensive. In order to address these issues, statistical models can be used. Using a dataset of cities selected based on similar characteristics such as population, variation of elevation within the city and surrounding area, and proximity to water bodies, satellite data is used to quantify the SUHI magnitude. A statistical model is fitted to current observations using predictive variables based on climate. The model shows promising performance for the majority of cities in the dataset and results are discussed.
- Open Access
- 26 March 2022
- Published by Copernicus GmbH
Investigating the influence of climate on Surface Urban Heat Island (SUHI) behaviour
As centres of human activity, cities contain over half the world’s population and this proportion is projected to increase to around 70 percent in 2050. The urban heat island (UHI) is a well observed phenomenon, where temperature in a city is warmer than the surrounding rural area.The UHI is influenced by both the climate and the morphology of the city. Focusing on cities in the tropics and subtropics and those with a population of less than 1 million, this research explores the relationship between the UHI effect and climate. Cities in different climate zones are selected based on similar characteristics such as population, variation of elevation within the city and surrounding area, and proximity to water bodies. Satellite data, with global coverage, is used to quantify the SUHI of the chosen cities. Peak SUHI was calculated using the Gaussian Surface Approximation methodology and the mean SUHI defined as the mean land surface temperature of urban pixels minus the mean of the surrounding rural area. Statistical techniques including Multiple Linear Regression, Random Forest Regression and Gaussian Process Regression are used to find relationships between SUHI and variables such as vegetation greenness (EVI), evaporative fraction, precipitation, incoming solar radiation, and city area.
- 26 March 2022
- Published by Copernicus GmbH
Open AccessInvestigating the influence of climate on Surface Urban Heat Island (SUHI) behaviour
As centres of human activity, cities contain over half the world’s population and this proportion is projected to increase to around 70 percent in 2050. The urban heat island (UHI) is a well observed phenomenon, where temperature in a city is warmer than the surrounding rural area.The UHI is influenced by both the climate and the morphology of the city. Focusing on cities in the tropics and subtropics and those with a population of less than 1 million, this research explores the relationship between the UHI effect and climate. Cities in different climate zones are selected based on similar characteristics such as population, variation of elevation within the city and surrounding area, and proximity to water bodies. Satellite data, with global coverage, is used to quantify the SUHI of the chosen cities. Peak SUHI was calculated using the Gaussian Surface Approximation methodology and the mean SUHI defined as the mean land surface temperature of urban pixels minus the mean of the surrounding rural area. Statistical techniques including Multiple Linear Regression, Random Forest Regression and Gaussian Process Regression are used to find relationships between SUHI and variables such as vegetation greenness (EVI), evaporative fraction, precipitation, incoming solar radiation, and city area.
- Open Access
- 30 September 2021
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 2 (1) , 812-836
Climate change projections for sustainable and healthy cities
The ambition to develop sustainable and healthy cities requires city-specific policy and practice founded on a multidisciplinary evidence base, including projections of human-induced climate change. A cascade of climate models of increasing complexity and resolution is reviewed, which provides the basis for constructing climate projections—from global climate models with a typical horizontal resolution of a few hundred kilometres, through regional climate models at 12–50 km to convection-permitting models at 1 km resolution that permit the representation of urban induced climates. Different approaches to modelling the urban heat island (UHI) are also reviewed—focusing on how climate model outputs can be adjusted and coupled with urban canopy models to better represent UHI intensity, its impacts and variability. The latter can be due to changes induced by urbanisation or to climate change itself. City interventions such as greater use of green infrastructure also have an effect on the UHI and can help to reduce adverse health impacts such as heat stress and the mortality associated with increasing heat. Examples for the Complex Urban Systems for Sustainability and Health (CUSSH) partner cities of London, Rennes, Kisumu, Nairobi, Beijing and Ningbo illustrate how cities could potentially make use of more detailed models and projections to develop and evaluate policies and practices targeted at their specific environmental and health priorities. Practice relevanceLarge-scale climate projections for the coming decades show robust trends in rising air temperatures, including more warm days and nights, and longer/more intense warm spells and heatwaves. This paper describes how more complex and higher resolution regional climate and urban canopy models can be combined with the aim of better understanding and quantifying how these larger scale patterns of change may be modified at the city or finer scale. These modifications may arise due to urbanisation and effects such as the UHI, as well as city interventions such as the greater use of grey and green infrastructures. There is potential danger in generalising from one city to another—under certain conditions some cities may experience an urban cool island, or little future intensification of the UHI, for example. City-specific, tailored climate projections combined with tailored health impact models contribute to an evidence base that supports built environment professionals, urban planners and policymakers to ensure designs for buildings and urban areas are fit for future climates.
- 30 September 2021
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 2 (1) , 812-836
Open AccessClimate change projections for sustainable and healthy cities
The ambition to develop sustainable and healthy cities requires city-specific policy and practice founded on a multidisciplinary evidence base, including projections of human-induced climate change. A cascade of climate models of increasing complexity and resolution is reviewed, which provides the basis for constructing climate projections—from global climate models with a typical horizontal resolution of a few hundred kilometres, through regional climate models at 12–50 km to convection-permitting models at 1 km resolution that permit the representation of urban induced climates. Different approaches to modelling the urban heat island (UHI) are also reviewed—focusing on how climate model outputs can be adjusted and coupled with urban canopy models to better represent UHI intensity, its impacts and variability. The latter can be due to changes induced by urbanisation or to climate change itself. City interventions such as greater use of green infrastructure also have an effect on the UHI and can help to reduce adverse health impacts such as heat stress and the mortality associated with increasing heat. Examples for the Complex Urban Systems for Sustainability and Health (CUSSH) partner cities of London, Rennes, Kisumu, Nairobi, Beijing and Ningbo illustrate how cities could potentially make use of more detailed models and projections to develop and evaluate policies and practices targeted at their specific environmental and health priorities. Practice relevanceLarge-scale climate projections for the coming decades show robust trends in rising air temperatures, including more warm days and nights, and longer/more intense warm spells and heatwaves. This paper describes how more complex and higher resolution regional climate and urban canopy models can be combined with the aim of better understanding and quantifying how these larger scale patterns of change may be modified at the city or finer scale. These modifications may arise due to urbanisation and effects such as the UHI, as well as city interventions such as the greater use of grey and green infrastructures. There is potential danger in generalising from one city to another—under certain conditions some cities may experience an urban cool island, or little future intensification of the UHI, for example. City-specific, tailored climate projections combined with tailored health impact models contribute to an evidence base that supports built environment professionals, urban planners and policymakers to ensure designs for buildings and urban areas are fit for future climates.