Eli C. Russell
Research Subjects
Eli C. Russell has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Michael L. Flessner
School of Plant and Environmental Sciences Virginia Tech Blacksburg Virginia USA
5 shared publications - Claudia Ann Rutland
Department of Crop, Soil, and Environmental Sciences Auburn University Auburn Alabama USA
2 shared publications - Jinesh Patel
Department of Crop, Soil, and Environmental Sciences Auburn University Auburn Alabama USA
2 shared publications Kevin W. Bamber
AVirginia Tech, School of Plant and Environmental Sciences, 675 Old Glade Road, Blacksburg, VA 24061, USA
2 shared publications- Nathan Daniel Hall
Auburn University
2 shared publications - Amber E. Riner
Center for Aquatic and Invasive Plants, University of Florida
1 shared publication
Latest Publications
- Open Access
- 31 August 2026
- Published by University of Florida George A Smathers Libraries in EDIS
- Vol. 2026 (5)
Are the Herbicides That We Use in Aquatic Systems Considered PFAS?
In the environmental science community, there has been increasing concern and emphasis on a relatively new designation of molecules called per- and polyfluoroalkyl substances, also known as PFAS. These compounds are colloquially referred to as “forever chemicals” due to their potential persistence in the environment. Recent concerns have arisen regarding aquatic herbicides and whether they are classified as PFAS. The purpose of this publication is to provide information on aquatic herbicides and their classification as PFAS, enabling all stakeholders involved with aquatic environments to gain a deeper understanding of the herbicides used in their water bodies. Written by Eli C. Russell and Joseph H. Bisesi, and published by the UF/IFAS Department of Agronomy, September 2026.
- 31 August 2026
- Published by University of Florida George A Smathers Libraries in EDIS
- Vol. 2026 (5)
Open AccessAre the Herbicides That We Use in Aquatic Systems Considered PFAS?
In the environmental science community, there has been increasing concern and emphasis on a relatively new designation of molecules called per- and polyfluoroalkyl substances, also known as PFAS. These compounds are colloquially referred to as “forever chemicals” due to their potential persistence in the environment. Recent concerns have arisen regarding aquatic herbicides and whether they are classified as PFAS. The purpose of this publication is to provide information on aquatic herbicides and their classification as PFAS, enabling all stakeholders involved with aquatic environments to gain a deeper understanding of the herbicides used in their water bodies. Written by Eli C. Russell and Joseph H. Bisesi, and published by the UF/IFAS Department of Agronomy, September 2026.
- Open Access
- 27 April 2026
- Published by CSIRO Publishing in Crop & Pasture Science
- Vol. 77 (4)
Evaluating seed impact mill efficacy during commercial soybean and wheat harvest
Context: Harvest weed seed control (HWSC) targets weed seeds as they pass through the harvester. Seed impact mills are aftermarket modifications that are mounted onto the back of the harvester and are one way to implement HWSC. These mills process the chaff fraction as it exits the harvester and kills the weed seeds therein. Aims: Two experiments were conducted to evaluate the integrated Harrington Seed Destructor (iHSD) in soybean and the Redekop Seed Control Unit (SCU) in soybean and wheat. The purpose was to determine weed seed kill by the mill (weed seed kill) and seed loss in the straw (weed seed fate) during commercial harvest. Methods: During harvest, a known amount of weed seeds was fed into the harvester front or directly into the mill and captured in the chaff or straw of harvester outputs. Six weed species were tested in soybean with the iHSD, and three species each were tested in soybean and wheat with the SCU. Key results: The mills delivered >98% seed kill on all tested species during soybean harvest. In wheat, seed kill was >91% for Italian ryegrass and >99% for the other two species tested. During soybean and wheat harvest, <7% of seeds escaped HWSC in the straw fraction. Conclusions: These data indicate that both mills generate high seed kill during grain crop harvest and very few seeds escape HWSC in the straw fraction. Implications: Seed impact mills could be used during harvest to reduce the return of problematic species to the soil seedbank.
- 27 April 2026
- Published by CSIRO Publishing in Crop & Pasture Science
- Vol. 77 (4)
Open AccessEvaluating seed impact mill efficacy during commercial soybean and wheat harvest
Context: Harvest weed seed control (HWSC) targets weed seeds as they pass through the harvester. Seed impact mills are aftermarket modifications that are mounted onto the back of the harvester and are one way to implement HWSC. These mills process the chaff fraction as it exits the harvester and kills the weed seeds therein. Aims: Two experiments were conducted to evaluate the integrated Harrington Seed Destructor (iHSD) in soybean and the Redekop Seed Control Unit (SCU) in soybean and wheat. The purpose was to determine weed seed kill by the mill (weed seed kill) and seed loss in the straw (weed seed fate) during commercial harvest. Methods: During harvest, a known amount of weed seeds was fed into the harvester front or directly into the mill and captured in the chaff or straw of harvester outputs. Six weed species were tested in soybean with the iHSD, and three species each were tested in soybean and wheat with the SCU. Key results: The mills delivered >98% seed kill on all tested species during soybean harvest. In wheat, seed kill was >91% for Italian ryegrass and >99% for the other two species tested. During soybean and wheat harvest, <7% of seeds escaped HWSC in the straw fraction. Conclusions: These data indicate that both mills generate high seed kill during grain crop harvest and very few seeds escape HWSC in the straw fraction. Implications: Seed impact mills could be used during harvest to reduce the return of problematic species to the soil seedbank.
- Open Access
- 2 March 2026
- Published by University of Florida George A Smathers Libraries in EDIS
- Vol. 2026 (2)
Conducting Vegetation Surveys Using Geotagged Photographs from Smartphone and Unmanned Aerial Systems
This publication aims to describe a simple method of importing and displaying geotagged images from unmanned aerial systems (UAS) or smartphones as vector symbols that are scaled and oriented to co-register with base layer maps in a geographic information system (GIS) without the need for processing into an orthomosaic. Instructions in this publication are for QGIS, version 3.28 LTR, but can be easily transferable to other GIS software. These methods offer an efficient and effective way to view high-resolution aerial images and photo-point image surveys in a GIS environment, allowing for basic analysis such as annotating features or points of interest. Written by J. S. Glueckert, A. E. Riner, J. K. Leary, K. L. Gladding, and E. C. Russell, and published by the UF/IFAS Department of Agronomy, February 2026.
- 2 March 2026
- Published by University of Florida George A Smathers Libraries in EDIS
- Vol. 2026 (2)
Open AccessConducting Vegetation Surveys Using Geotagged Photographs from Smartphone and Unmanned Aerial Systems
This publication aims to describe a simple method of importing and displaying geotagged images from unmanned aerial systems (UAS) or smartphones as vector symbols that are scaled and oriented to co-register with base layer maps in a geographic information system (GIS) without the need for processing into an orthomosaic. Instructions in this publication are for QGIS, version 3.28 LTR, but can be easily transferable to other GIS software. These methods offer an efficient and effective way to view high-resolution aerial images and photo-point image surveys in a GIS environment, allowing for basic analysis such as annotating features or points of interest. Written by J. S. Glueckert, A. E. Riner, J. K. Leary, K. L. Gladding, and E. C. Russell, and published by the UF/IFAS Department of Agronomy, February 2026.
- Open Access
- 24 November 2025
- Published by Cambridge University Press (CUP) in Weed Technology
- Vol. 39, 1-30
Interventions for weed seed management in cotton around the harvest time
Late-season escapes of Palmer amaranth and waterhemp (both are Amaranthus species) pose a significant challenge in cotton production due to their high fecundity, herbicide resistance, and ability to replenish the weed seedbank at harvest. While harvest weed seed control (HWSC) has been adopted in grain systems, its feasibility in cotton remains unknown due to differences in cotton harvesting equipment design. Therefore, this study aimed to determine the fate of Amaranthus spp. seeds during harvest with cotton pickers and stripper harvesters, and evaluated the efficacy of an impact mill to destroy a range of weed seeds present in different types of cotton debris. Along with the seed cotton, cotton strippers removed 52% of the Amaranthus seeds, compared with just 7% with pickers, which are then cleaned at the cotton gin. About 85% of the seeds were retained on the plant after harvest by the pickers, and about 15% by the strippers. Seeds shattered to the ground accounted for 8% with pickers and 18% with strippers. Additionally, the cotton stripper’s field cleaner mechanism removed 15% of the weed seeds. Together, seeds collected in seed cotton, retained on the plant, or separated by field cleaners (in strippers) represent points for HWSC implementation. Different types of cotton debris were then run through a stationary weed-seed impact mill with a known number of seeds for seven weed species to determine seed destruction efficacy. The stem debris had a 29% moisture content, which is too high for the impact mill and caused mill clogging; however, seed kill levels of 98% were achieved in bur debris and gin debris types, values similar to those reported in grain systems. Together, these findings provide a framework for incorporating HWSC practices into cotton, offering growers and processors a way to reduce weed seedbank inputs.
- 24 November 2025
- Published by Cambridge University Press (CUP) in Weed Technology
- Vol. 39, 1-30
Open AccessInterventions for weed seed management in cotton around the harvest time
Late-season escapes of Palmer amaranth and waterhemp (both are Amaranthus species) pose a significant challenge in cotton production due to their high fecundity, herbicide resistance, and ability to replenish the weed seedbank at harvest. While harvest weed seed control (HWSC) has been adopted in grain systems, its feasibility in cotton remains unknown due to differences in cotton harvesting equipment design. Therefore, this study aimed to determine the fate of Amaranthus spp. seeds during harvest with cotton pickers and stripper harvesters, and evaluated the efficacy of an impact mill to destroy a range of weed seeds present in different types of cotton debris. Along with the seed cotton, cotton strippers removed 52% of the Amaranthus seeds, compared with just 7% with pickers, which are then cleaned at the cotton gin. About 85% of the seeds were retained on the plant after harvest by the pickers, and about 15% by the strippers. Seeds shattered to the ground accounted for 8% with pickers and 18% with strippers. Additionally, the cotton stripper’s field cleaner mechanism removed 15% of the weed seeds. Together, seeds collected in seed cotton, retained on the plant, or separated by field cleaners (in strippers) represent points for HWSC implementation. Different types of cotton debris were then run through a stationary weed-seed impact mill with a known number of seeds for seven weed species to determine seed destruction efficacy. The stem debris had a 29% moisture content, which is too high for the impact mill and caused mill clogging; however, seed kill levels of 98% were achieved in bur debris and gin debris types, values similar to those reported in grain systems. Together, these findings provide a framework for incorporating HWSC practices into cotton, offering growers and processors a way to reduce weed seedbank inputs.
- Open Access
- 8 October 2025
- Published by Elsevier in Crop Protection
- Vol. 199
Field testing of the Redekop seed control unit in soybean and wheat production systems in Virginia
- 8 October 2025
- Published by Elsevier in Crop Protection
- Vol. 199
Open AccessField testing of the Redekop seed control unit in soybean and wheat production systems in Virginia
- Open Access
- 31 March 2025
- Published by Cambridge University Press (CUP) in Weed Science
- Vol. 73 (1) , 1-19
Evaluating weed seed kill efficacy and horsepower draw of two impact mills for use in soybean production
Combine modifications for harvest weed seed control like the Redekop Seed Control Unit (SCU) and the integrated Harrington Seed Destructor (iHSD) have been successfully used to kill problematic weed seeds in small grain production in Australia. These seed impact mills could have a fit in U.S. soybean [Glycine max (L.) Merr.] production. Testing the seed kill rate of problematic weed species in soybean is important for confirming the efficacy of the mills. Additionally, the mills may be affected by changes in crop yield and harvest residue moisture, which can have an impact on chaff flow rate and chaff moisture, respectively. This research aimed at determining the seed kill percent for problematic weeds and how varying chaff flow rates and chaff moisture content in soybean chaff affect the seed kill rate and horsepower draw of two different impact mills, the Redekop SCU and the iHSD. All testing was conducted using stationary test stands. Chaff flow rate and chaff moisture levels tested ranged from 0.5× to 2× standard combine throughput and 11.7% to 28.6% moisture, respectively. All tested species were killed at >98% by both mills. Increasing chaff flow rate resulted in a decrease in seed kill for all tested species with the iHSD and only common ragweed (Ambrosia artemisiifolia L.) with the Redekop SCU. Increasing chaff moisture only resulted in a decrease in seed kill for Palmer amaranth (Amaranthus palmeri S. Watson) with the iHSD. Data evaluating the horsepower needed to power the mills also indicated that chaff flow rate and chaff moisture resulted in a significant increase in horsepower draw. With generally high kill rates (>98%) and the ability to kill weed seeds at >98% in less than ideal harvest conditions (i.e., high-moisture chaff), seed impact mills could be used in soybean production to reduce weed seed inputs into the soil seedbank during harvest.
- 31 March 2025
- Published by Cambridge University Press (CUP) in Weed Science
- Vol. 73 (1) , 1-19
Open AccessEvaluating weed seed kill efficacy and horsepower draw of two impact mills for use in soybean production
Combine modifications for harvest weed seed control like the Redekop Seed Control Unit (SCU) and the integrated Harrington Seed Destructor (iHSD) have been successfully used to kill problematic weed seeds in small grain production in Australia. These seed impact mills could have a fit in U.S. soybean [Glycine max (L.) Merr.] production. Testing the seed kill rate of problematic weed species in soybean is important for confirming the efficacy of the mills. Additionally, the mills may be affected by changes in crop yield and harvest residue moisture, which can have an impact on chaff flow rate and chaff moisture, respectively. This research aimed at determining the seed kill percent for problematic weeds and how varying chaff flow rates and chaff moisture content in soybean chaff affect the seed kill rate and horsepower draw of two different impact mills, the Redekop SCU and the iHSD. All testing was conducted using stationary test stands. Chaff flow rate and chaff moisture levels tested ranged from 0.5× to 2× standard combine throughput and 11.7% to 28.6% moisture, respectively. All tested species were killed at >98% by both mills. Increasing chaff flow rate resulted in a decrease in seed kill for all tested species with the iHSD and only common ragweed (Ambrosia artemisiifolia L.) with the Redekop SCU. Increasing chaff moisture only resulted in a decrease in seed kill for Palmer amaranth (Amaranthus palmeri S. Watson) with the iHSD. Data evaluating the horsepower needed to power the mills also indicated that chaff flow rate and chaff moisture resulted in a significant increase in horsepower draw. With generally high kill rates (>98%) and the ability to kill weed seeds at >98% in less than ideal harvest conditions (i.e., high-moisture chaff), seed impact mills could be used in soybean production to reduce weed seed inputs into the soil seedbank during harvest.
- Open Access
- 31 March 2025
- Published by Cambridge University Press (CUP) in Weed Science
- Vol. 73 (1) , 1-18
Evaluating two impact mills seed kill efficacy and horsepower draw for use in U.S. wheat production
Seed impact mills like the Redekop Seed Control Unit (SCU) and the integrated Harrington Seed Destructor (iHSD) have the potential to fit within the U.S. wheat (Triticum aestivum L.) production system, but they may be affected by changes in crop yield and harvest residue moisture, which can have an impact on chaff flow rate and chaff moisture, respectively. This research aimed to determine the seed kill of problematic weed species and how varying chaff flow rates and chaff moisture affect seed kill and horsepower draw of the SCU and the iHSD. Four different chaff flow rates were tested at 0.75, 1.5, 2.25, and 3.0 kg s−1, which span 0.5× to 2× of a combine’s standard throughput. Additionally, four chaff moisture contents were tested at 10.7%, 16.4%, 22.1%, and 27.8%, which span and exceed typical harvest conditions. Results indicated that >91% of all weed seeds of the tested species were killed by either mill. Seed kill decreased by 7.9% and 0.08% for every 1-kg increase in chaff flow rate for Italian ryegrass [Lolium perenne L. ssp. multiflorum (Lam.) Husnot] and hairy vetch (Vicia villosa Roth), respectively, for the iHSD. Seed kill also decreased by 3.4% for every 1-kg increase in chaff flow rate for weedy L. perenne ssp. multiflorum for the SCU. Increasing chaff moisture resulted in seed kill decreasing by 0.43% and 0.015% for every 1% increase in chaff moisture for weedy L. perenne ssp. multiflorum and volunteer canola (Brassica napus L.), respectively, with the SCU. Both chaff flow rate and chaff moisture had a significant effect on horsepower draw for both mills compared with an empty mill. Despite the increase in horsepower draw and the decrease in seed kill, these data indicate the potential for seed impact mills to operate in less than ideal conditions while still providing seed kill rates >74%.
- 31 March 2025
- Published by Cambridge University Press (CUP) in Weed Science
- Vol. 73 (1) , 1-18
Open AccessEvaluating two impact mills seed kill efficacy and horsepower draw for use in U.S. wheat production
Seed impact mills like the Redekop Seed Control Unit (SCU) and the integrated Harrington Seed Destructor (iHSD) have the potential to fit within the U.S. wheat (Triticum aestivum L.) production system, but they may be affected by changes in crop yield and harvest residue moisture, which can have an impact on chaff flow rate and chaff moisture, respectively. This research aimed to determine the seed kill of problematic weed species and how varying chaff flow rates and chaff moisture affect seed kill and horsepower draw of the SCU and the iHSD. Four different chaff flow rates were tested at 0.75, 1.5, 2.25, and 3.0 kg s−1, which span 0.5× to 2× of a combine’s standard throughput. Additionally, four chaff moisture contents were tested at 10.7%, 16.4%, 22.1%, and 27.8%, which span and exceed typical harvest conditions. Results indicated that >91% of all weed seeds of the tested species were killed by either mill. Seed kill decreased by 7.9% and 0.08% for every 1-kg increase in chaff flow rate for Italian ryegrass [Lolium perenne L. ssp. multiflorum (Lam.) Husnot] and hairy vetch (Vicia villosa Roth), respectively, for the iHSD. Seed kill also decreased by 3.4% for every 1-kg increase in chaff flow rate for weedy L. perenne ssp. multiflorum for the SCU. Increasing chaff moisture resulted in seed kill decreasing by 0.43% and 0.015% for every 1% increase in chaff moisture for weedy L. perenne ssp. multiflorum and volunteer canola (Brassica napus L.), respectively, with the SCU. Both chaff flow rate and chaff moisture had a significant effect on horsepower draw for both mills compared with an empty mill. Despite the increase in horsepower draw and the decrease in seed kill, these data indicate the potential for seed impact mills to operate in less than ideal conditions while still providing seed kill rates >74%.
- Open Access
- 24 July 2023
- Published by Cambridge University Press (CUP) in Weed Science
- Vol. 71 (5) , 438-443
α-Tubulin mutation Thr-239-Ile in annual bluegrass (Poa annua) induces variable responses to prodiamine and dithiopyr
Mitotic-inhibiting herbicides, like prodiamine and dithiopyr, are used to control annual bluegrass (Poa annua L.) preemergence in managed turfgrass; however, resistance to mitotic-inhibiting herbicides has evolved due to repeated applications of herbicide from a single mechanism of action. Three suspected resistant populations (R1, R2, and R3) were collected in Alabama and Florida and screened for resistance to prodiamine. Part of the α-tubulin gene was sequenced for known target-site mutations. Target-site mutations were reported in all three R populations, with each containing an amino acid substitution at position 239 from threonine to isoleucine (Thr-239-Ile). Previous research has indicated that the Thr-239-Ile mutation confers resistance to dinitroaniline herbicides in other species. Dose–response screens using prodiamine and dithiopyr were conducted and I50 values were calculated for R1, R2, and R3 using regression models based on seedling emergence. For prodiamine, I50 values for R1, R2, and R3 were 35.3, 502.7, and 91.5 g ai ha−1, respectively, resulting in 2.9-, 41.9-, and 7.6-fold resistance, respectively, when compared with a susceptible (S) population. For dithiopyr, I50 values for R1, R2, and R3 were 154.0, 114.2, and 190.1 g ai ha−1, respectively, resulting in 3.6-, 2.7-, and 4.5-fold resistance, respectively, when compared with an S population. When comparing I90 values with the highest labeled use rates, R2 had a 2.9-fold level of resistance to prodiamine, and R1, R2, and R3 had a 2.4-, 2.0-, and 3.2-fold levels of resistance to dithiopyr, respectively. This is the first report of a variable response in P. annua to prodiamine despite each R population possessing the same mutation.
- 24 July 2023
- Published by Cambridge University Press (CUP) in Weed Science
- Vol. 71 (5) , 438-443
Open Accessα-Tubulin mutation Thr-239-Ile in annual bluegrass (Poa annua) induces variable responses to prodiamine and dithiopyr
Mitotic-inhibiting herbicides, like prodiamine and dithiopyr, are used to control annual bluegrass (Poa annua L.) preemergence in managed turfgrass; however, resistance to mitotic-inhibiting herbicides has evolved due to repeated applications of herbicide from a single mechanism of action. Three suspected resistant populations (R1, R2, and R3) were collected in Alabama and Florida and screened for resistance to prodiamine. Part of the α-tubulin gene was sequenced for known target-site mutations. Target-site mutations were reported in all three R populations, with each containing an amino acid substitution at position 239 from threonine to isoleucine (Thr-239-Ile). Previous research has indicated that the Thr-239-Ile mutation confers resistance to dinitroaniline herbicides in other species. Dose–response screens using prodiamine and dithiopyr were conducted and I50 values were calculated for R1, R2, and R3 using regression models based on seedling emergence. For prodiamine, I50 values for R1, R2, and R3 were 35.3, 502.7, and 91.5 g ai ha−1, respectively, resulting in 2.9-, 41.9-, and 7.6-fold resistance, respectively, when compared with a susceptible (S) population. For dithiopyr, I50 values for R1, R2, and R3 were 154.0, 114.2, and 190.1 g ai ha−1, respectively, resulting in 3.6-, 2.7-, and 4.5-fold resistance, respectively, when compared with an S population. When comparing I90 values with the highest labeled use rates, R2 had a 2.9-fold level of resistance to prodiamine, and R1, R2, and R3 had a 2.4-, 2.0-, and 3.2-fold levels of resistance to dithiopyr, respectively. This is the first report of a variable response in P. annua to prodiamine despite each R population possessing the same mutation.
- Open Access
- 26 June 2023
- Published by Cambridge University Press (CUP) in Weed Technology
- Vol. 37 (4) , 445-451
Preferred information and delivery methods for weed management extension in Virginia
The goal of weed science extension efforts are to encourage and accelerate adoption of diverse, effective, and economical management tactics. To be most successful and efficient, extension personnel need to be aware of growers’ preferred information sources, delivery format, and areas of focus for future research. To this end, surveys were distributed at crop and forage extension meetings in Virginia. The results from 249 responses indicate that both crop and forage producers have similar influences as well as preferences for both programming and future research. Agribusiness personnel (e.g. co-ops, suppliers, vendors, crop consultants, sales reps) had the greatest influence on herbicide-purchasing decisions and the primary source of information for weed management decisions, and thus should be a target audience of extension. Respondents said that economic assessments, weed control data, and yield data are most likely to influence changes in management and that they would prefer to get that information through traditional extension formats (presentations, publications, and on-farm demonstrations). Generally, respondents also indicated that they wanted extension to focus on evaluating new herbicides for weed control and crop safety in the future over alternative non-herbicidal weed control methods. Therefore, extension is likely to be more successful by including herbicides in the integrated weed management approach rather than solely non-chemical approaches.
- 26 June 2023
- Published by Cambridge University Press (CUP) in Weed Technology
- Vol. 37 (4) , 445-451
Open AccessPreferred information and delivery methods for weed management extension in Virginia
The goal of weed science extension efforts are to encourage and accelerate adoption of diverse, effective, and economical management tactics. To be most successful and efficient, extension personnel need to be aware of growers’ preferred information sources, delivery format, and areas of focus for future research. To this end, surveys were distributed at crop and forage extension meetings in Virginia. The results from 249 responses indicate that both crop and forage producers have similar influences as well as preferences for both programming and future research. Agribusiness personnel (e.g. co-ops, suppliers, vendors, crop consultants, sales reps) had the greatest influence on herbicide-purchasing decisions and the primary source of information for weed management decisions, and thus should be a target audience of extension. Respondents said that economic assessments, weed control data, and yield data are most likely to influence changes in management and that they would prefer to get that information through traditional extension formats (presentations, publications, and on-farm demonstrations). Generally, respondents also indicated that they wanted extension to focus on evaluating new herbicides for weed control and crop safety in the future over alternative non-herbicidal weed control methods. Therefore, extension is likely to be more successful by including herbicides in the integrated weed management approach rather than solely non-chemical approaches.
- Open Access
- 1 October 2021
- Published by Cambridge University Press (CUP) in Weed Science
- Vol. 70 (1) , 20-25
Mitotic-inhibiting herbicide response variation in goosegrass (Eleusine indica) with a Leu-136-Phe substitution in α-tubulin
Dithiopyr and dinitroanilines are preemergence-applied, mitotic-inhibiting herbicides used to control goosegrass [Eleusine indica (L.) Gaertn.] in turfgrass. A suspected resistant E. indica population was collected from a golf course putting green and was evaluated for possible resistance to dithiopyr and prodiamine. After dose–response evaluation, the α-tubulin gene was sequenced for known target-site mutations that have been reported to confer resistance to mitotic-inhibiting herbicides. A mutation was discovered that resulted in an amino acid substitution at position 136 from leucine to phenylalanine (Leu-136-Phe). Previous research has indicated that Leu-136-Phe does confer resistance to dinitroaniline herbicides. The level of resistance indicated by regression models and I50 values indicates that there is 54.1-, 4.7-, >100-, and >100-fold resistance to dithiopyr, prodiamine, pendimethalin, and oryzalin, respectively, when compared with the susceptible population based on seedling emergence response and 88.4-, 7.8-, >100-, and >100-fold resistance to dithiopyr, prodiamine, pendimethalin, and oryzalin, respectively, when compared with the susceptible population based on biomass reduction response. This is the first report of less resistance to prodiamine compared with pendimethalin or oryzalin due to a target-site α-tubulin mutation and the first report of a target-site α-tubulin mutation associated with dithiopyr resistance.
- 1 October 2021
- Published by Cambridge University Press (CUP) in Weed Science
- Vol. 70 (1) , 20-25
Open AccessMitotic-inhibiting herbicide response variation in goosegrass (Eleusine indica) with a Leu-136-Phe substitution in α-tubulin
Dithiopyr and dinitroanilines are preemergence-applied, mitotic-inhibiting herbicides used to control goosegrass [Eleusine indica (L.) Gaertn.] in turfgrass. A suspected resistant E. indica population was collected from a golf course putting green and was evaluated for possible resistance to dithiopyr and prodiamine. After dose–response evaluation, the α-tubulin gene was sequenced for known target-site mutations that have been reported to confer resistance to mitotic-inhibiting herbicides. A mutation was discovered that resulted in an amino acid substitution at position 136 from leucine to phenylalanine (Leu-136-Phe). Previous research has indicated that Leu-136-Phe does confer resistance to dinitroaniline herbicides. The level of resistance indicated by regression models and I50 values indicates that there is 54.1-, 4.7-, >100-, and >100-fold resistance to dithiopyr, prodiamine, pendimethalin, and oryzalin, respectively, when compared with the susceptible population based on seedling emergence response and 88.4-, 7.8-, >100-, and >100-fold resistance to dithiopyr, prodiamine, pendimethalin, and oryzalin, respectively, when compared with the susceptible population based on biomass reduction response. This is the first report of less resistance to prodiamine compared with pendimethalin or oryzalin due to a target-site α-tubulin mutation and the first report of a target-site α-tubulin mutation associated with dithiopyr resistance.