JGJiaao Guan

Jiaao Guan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiaao Guan has a total of 48 co-authors. Here are the top co-authors by number of shared publications:

  • Shaochen Chen

    Aiiso Yufeng Li Family Department of Chemical and Nano Engineering, University of California San Diego, La Jolla, USA

    4 shared publications
  • Yi Xiang

    Aiiso Yufeng Li Family Department of Chemical and Nano Engineering, University of California San Diego, La Jolla, USA

    4 shared publications
  • Daniel Wangpraseurt

    Marine Biology Research Division, Scripps Institution of Oceanography, University of California, San Diego

    2 shared publications
  • Emmie Yao

    Department of Nanoengineering, University of California, San Diego, La Jolla, CA 92093, USA

    2 shared publications
  • Netanel Kramer

    Marine Biology Research Division, Scripps Institution of Oceanography, University of California, San Diego, La Jolla, CA, USA

    2 shared publications
  • Shangting You

    State Key Laboratory of Extreme Photonics and Instrumentation, College of Optical Science and Engineering, Zhejiang University, Hangzhou 310027, People’s Republic of China

    2 shared publications

Latest Publications

  • A 3D‐Printed Microvascular Surgery Training Platform With High‐Fidelity, Biomimetic Properties

    by Lin Huang, Krish Narotam, Emma Berman, Alexander Park, Jiaao Guan, Jason Llaneras, Garrison Leach, Lieselot Carrette, Reid Abrams, David B. Berry, et al.

    Current vascular grafts face limitations including inadequate mechanical strength, inability to replicate small and complex anatomical structures, ethical concerns with animal‐based training models, and high costs that limit accessibility. We developed a cytocompatible vascular graft fabrication platform combining dual‐network hydrogels with high‐resolution digital light processing (DLP) 3D printing to address these bottlenecks. Through systematic evaluation of hydrogel formulations, we identified a polyacrylamide‐alginate‐calcium dual‐network system achieving tensile properties comparable to native vessels while enabling exceptional suture retention and structural integrity required for microsurgical applications. Integration with DLP printing enabled fabrication of ultra‐small microchannels and complex branching vascular networks with patient‐specific geometries derived from magnetic resonance imaging (MRI) data. To fine‐tune the material properties of the vessels, we developed a machine learning model that optimizes the bioink composition to achieve targeted mechanical properties. We further established an integrated microsurgery training platform combining 3D‐printed vessels with essential surgical equipment, providing authentic haptic feedback at a significantly lower cost than commercial alternatives. Biological validation demonstrated robust endothelial cell viability and barrier formation. These studies demonstrated a comprehensive platform addressing multiple critical bottlenecks in vascular graft technology with potential for both accessible microsurgical training and future therapeutic applications in personalized vascular reconstruction.

  • Open Access

    Machine learning-assisted stiffness prediction in high-cell-density bioprinting

    by Jiaao Guan, Yazhi Sun, Emmie J. Yao, Yi Xiang, Mary K. Melarkey, Grace Y. Lu, Amelia H. Burns, Nancy Zhang, Shaochen Chen

    Bioprinting of cell-laden hydrogels is a rapidly growing field in tissue engineering. The advent of digital light processing (DLP) three-dimensional (3D) bioprinting technique has revolutionized the fabrication of complex 3D structures. By adjusting light exposure, it becomes possible to control the mechanical properties of the structure, a critical factor in modulating cell activities. To better mimic cell densities in real tissues, recent progress has been made in achieving high-cell-density (HCD) printing with high resolution. However, regulating the stiffness in HCD constructs remains challenging. The large volume of cells greatly affects the light-based DLP bioprinting by causing light absorption, reflection, and scattering. Here, we introduce a neural network-based machine learning technique to predict the stiffness of cell-laden hydrogel scaffolds. Using comprehensive mechanical testing data from 3D bioprinted samples, the model was trained to deliver accurate predictions. To address the demand of working with precious and costly cell types, we employed various methods to ensure the generalizability of the model, even with limited datasets. We demonstrated a transfer learning method to achieve good performance for a precious cell type with a reduced amount of data. The chosen method outperformed many other machine learning techniques, offering a reliable and efficient solution for stiffness prediction in cell-laden scaffolds. This breakthrough paves the way for the next generation of precision bioprinting and more customized tissue engineering.


  • Top Cited Papers

    High cell density and high-resolution 3D bioprinting for fabricating vascularized tissues

    by Shangting You, Yi Xiang, Henry H. Hwang, David B. Berry, Wisarut Kiratitanaporn, Jiaao Guan, Emmie Yao, Min Tang, Zheng Zhong, Xinyue Ma, et al.

    Three-dimensional (3D) bioprinting techniques have emerged as the most popular methods to fabricate 3D-engineered tissues; however, there are challenges in simultaneously satisfying the requirements of high cell density (HCD), high cell viability, and fine fabrication resolution. In particular, bioprinting resolution of digital light processing–based 3D bioprinting suffers with increasing bioink cell density due to light scattering. We developed a novel approach to mitigate this scattering-induced deterioration of bioprinting resolution. The inclusion of iodixanol in the bioink enables a 10-fold reduction in light scattering and a substantial improvement in fabrication resolution for bioinks with an HCD. Fifty-micrometer fabrication resolution was achieved for a bioink with 0.1 billion per milliliter cell density. To showcase the potential application in tissue/organ 3D bioprinting, HCD thick tissues with fine vascular networks were fabricated. The tissues were viable in a perfusion culture system, with endothelialization and angiogenesis observed after 14 days of culture.


  • Open Access

    Morpho-functional traits of the coral Stylophora pistillata enhance light capture for photosynthesis at mesophotic depths

    by Netanel Kramer, Jiaao Guan, Shaochen Chen, Daniel Wangpraseurt, Yossi Loya

    The morphological architecture of photosynthetic corals modulates the light capture and functioning of the coral-algal symbiosis on shallow-water corals. Since corals can thrive on mesophotic reefs under extreme light-limited conditions, we hypothesized that microskeletal coral features enhance light capture under low-light environments. Utilizing micro-computed tomography scanning, we conducted a novel comprehensive three-dimensional (3D) assessment of the small-scale skeleton morphology of the depth-generalist coral Stylophora pistillata collected from shallow (4–5 m) and mesophotic (45–50 m) depths. We detected a high phenotypic diversity between depths, resulting in two distinct morphotypes, with calyx diameter, theca height, and corallite marginal spacing contributing to most of the variation between depths. To determine whether such depth-specific morphotypes affect coral light capture and photosynthesis on the corallite scale, we developed 3D simulations of light propagation and photosynthesis. We found that microstructural features of corallites from mesophotic corals provide a greater ability to use solar energy under light-limited conditions; while corals associated with shallow morphotypes avoided excess light through self-shading skeletal architectures. The results from our study suggest that skeleton morphology plays a key role in coral photoadaptation to light-limited environments.


  • Open Access

    Rapid 3D bioprinting of a multicellular model recapitulating pterygium microenvironment

    by Zheng Zhong, Jing Wang, Jing Tian, Xiaoqian Deng, Alis Balayan, Yazhi Sun, Yi Xiang, Jiaao Guan, Jacob Schimelman, Henry Hwang, et al.


  • Compensating the cell-induced light scattering effect in light-based bioprinting using deep learning

    by Jiaao Guan, Shangting You, Yi Xiang, Jacob Schimelman, Jeffrey Alido, Xinyue Ma, Min Tang, Shaochen Chen

    Digital light processing (DLP)-based three-dimensional (3D) printing technology has the advantages of speed and precision comparing with other 3D printing technologies like extrusion-based 3D printing. Therefore, it is a promising biomaterial fabrication technique for tissue engineering and regenerative medicine. When printing cell-laden biomaterials, one challenge of DLP-based bioprinting is the light scattering effect of the cells in the bioink, and therefore induce unpredictable effects on the photopolymerization process. In consequence, the DLP-based bioprinting requires extra trial-and-error efforts for parameters optimization for each specific printable structure to compensate the scattering effects induced by cells, which is often difficult and time-consuming for a machine operator. Such trial-and-error style optimization for each different structure is also very wasteful for those expensive biomaterials and cell lines. Here, we use machine learning to learn from a few trial sample printings and automatically provide printer the optimal parameters to compensate the cell-induced scattering effects. We employ a deep learning method with a learning-based data augmentation which only requires a small amount of training data. After learning from the data, the algorithm can automatically generate the printer parameters to compensate the scattering effects. Our method shows strong improvement in the intra-layer printing resolution for bioprinting, which can be further extended to solve the light scattering problems in multilayer 3D bioprinting processes.


  • Open Access

    Characterization of morpho-functional traits in mesophotic corals reveals optimized light capture and photosynthesis

    by Netanel Kramer, Jiaao Guan, Shaochen Chen, Daniel Wangpraseurt, Yossi Loya

    The morphology and skeleton architecture of photosynthetic corals modulates the light capture and functioning of the coral-algal symbiosis on shallow-water corals. Since corals can thrive on mesophotic reefs under extreme light-limited conditions, we hypothesized that microskeletal coral features optimize light capture under low-light environments. Using micro-computed tomography scanning, we conducted a comprehensive three-dimensional (3D) assessment of small-scale skeleton morphology of the depth-generalist coral Stylophora pistillata collected from shallow (5 m) and mesophotic (45 m) depths. We detected a high phenotypic diversity between depths, resulting in two distinct morphotypes, with calyx diameter, theca height, and corallite marginal spacing contributing to most of the variation between depths. To determine whether such depth-specific morphotypes affect coral light capture and photosynthesis on the corallite-scale, we developed 3D simulations of light propagation based on photosynthesis-irradiance parameters. We found that corals associated with shallow morphotypes dissipated excess light through self-shading microskeletal features; while mesophotic morphotypes facilitated enhanced light absorption and photosynthesis under low-light conditions. We conclude that the mesophotic coral architecture provides a greater ability to trap solar energy and efficiently exploit the limited light conditions, and suggest that morphological modifications play a key role in the photoadaptation response to low-light.