ESEdward J. Strobach

Edward J. Strobach

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Edward J. Strobach has a total of 65 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Supplementary material to "Introducing a Low-Cost Approach for Environmental Monitoring with the Civil Air Patrol (CAP) Aircraft: An Example Addressing Greenhouse Gas Emissions"

    by Edward J. Strobach, Elaine Jaross, Xinrong Ren, Joel Dreessen, Paul Walter, James S. Wang, Maurice Roots, Julia Famiglietti, Austin Turner, Phillip Stratton, et al.

  • Open Access

    Introducing a Low-Cost Approach for Environmental Monitoring with the Civil Air Patrol (CAP) Aircraft: An Example Addressing Greenhouse Gas Emissions

    by Edward J. Strobach, Elaine Jaross, Xinrong Ren, Joel Dreessen, Paul Walter, James S. Wang, Maurice Roots, Julia Famiglietti, Austin Turner, Phillip Stratton, et al.

    Research aircraft provide essential information about weather, climate forcing, and air quality (AQ). Instrumenting and deploying these aircraft, however, requires substantial investment. Single engine Cessna aircraft flown by the Civil Air Patrol (CAP) offer practical, economical, and widely available platforms for tropospheric sounding of meteorological variables, greenhouse gases (GHGs), and short-lived pollutants. A recent partnership with CAP has led to frequent surveys across the state of Maryland with a Licor 7810 to measure CO2, CH4 , and H2O concentrations for GHG analyses and a basic meteorological measurement suite to investigate transport and calculate emission rates (ERs) using the mass balance approach (MBA). The flexibility of multiple aircraft and pilots facilitates surveys at weekly to bi-weekly timescales. This paper outlines the steps required for a successful operation with the CAP, including flight planning and procedures, instrument calibration, and post-processing. Flights dedicated to GHG sampling are used to demonstrate what the platform can deliver, while the approach itself is general and extends to other areas of environmental monitoring. Examples of CAP flights presented here highlight the strategic targeting of GHG emissions from sources selected through close coordination with the Maryland Department of the Environment (MDE), including frequent visits to landfills, natural gas facilities, and other sources to quantify short-term variability of ERs. Also highlighted are synergistic measurements characterizing GHG plumes from ground to flight level from CAP aircraft and NOAA's Air Resources Car (ARC) during a planned release at the Accident natural gas compressor station (NGCS). The documentation of frequent flights from this work and the availability of CAP aircraft in all 50 states demonstrates a scalable solution for frequent spatiotemporal GHG monitoring that addresses anthropogenic impacts, complements regional measurement efforts, and serves as a viable option for validating satellite retrievals.

  • Open Access

    Analysis of Smoke Transport Over the Northeast US Caused by Wildfires in Canada During June 2023—Leveraging the HRRR‐Smoke Model Predictions and Remote Sensing Observations

    by Y. L. Pichugina, E. J. Strobach, A. W. Brewer, R. Ahmadov, P. S. Bhattacharjee, E. P. James, A. J. Schnell, B. Carroll, S. Baidar, S. Sandberg

    The intensification of wildland fires across portions of Canada in early June 2023 led to significant smoke transport into the eastern United States, resulting in poor air quality and reduced visibility. Significant degradation of air quality was evident from PM 2.5 surface measurements as the smoke plume moved southwards, which was confirmed by satellite data and the operational HRRR‐Smoke model. The availability of Doppler LiDAR data and the publicity surrounding the poor conditions in Washington DC led to a focused effort addressing the timing and enhancement of smoke in the nation's capital. The predictive skill of the operational HRRR‐Smoke model was evaluated against wind profile and PM 2.5 surface measurements. In general, the HRRR‐Smoke accurately predicted the meteorological conditions, particularly the diurnal evolution of regional winds and boundary layer depth. Despite capturing the diurnal evolution of winds, errors were still seen in the wind shear structure and magnitude (biases ranged between ±2 m s −1 and ±4 m s −1 ). In terms of air quality, good agreement was found between modeled and observed PM 2.5 concentrations at four sites in Washington DC. Confidence in modeled winds and PM 2.5 allowed HRRR‐Smoke to be used to determine the development of a lee trough as a regional transport mechanism for circulating smoke into Washington DC that led to bad air quality.

  • Open Access

    Emerging mobile lidar technology to study boundary layer winds influenced by operating turbines

    by Yelena Pichugina, Alan W. Brewer, Sunil Baidar, Robert Banta, Edward Strobach, Brandi McCarty, Brian Carroll, Nicola Bodini, Stefano Letizia, Richard Marchbanks, et al.

    The development of a microjoule-class pulsed Doppler lidar and deployment of this compact system on mobile platforms such as aircraft, ships, or trucks have opened a new opportunity to characterize the dynamics of complex mesoscale wind flows. The PickUp-based Mobile Atmospheric Sounder (PUMAS) truck-based lidar system was recently used during the American Wake Experiment (AWAKEN) to assess the general structure of boundary layer (BL) wind and turbulence around wind turbines in central Oklahoma. Wind speed profiles averaged over PUMAS transects influenced by the operating turbines (waked flow) show a 1–2 m s −1 reduction compared to mean undisturbed (free flow) wind speed profiles. Spatial variability in wind speed was observed in time–height cross-sections at different distances from turbines. The wind speeds were about 9–12 m s −1 at 6 km distance compared to 5–7 m s −1 at the transects near the turbines. The PUMAS dataset from AWAKEN demonstrated the capability of the mobile Doppler lidar system to document spatial variability in wind flows at different distances from wind turbines and obtain quantitative estimates of wind speed reduction in the waked flow. The high-frequency, simultaneous measurements of the horizontal and vertical winds provide a new approach for characterizing dynamic processes critical for wind farm wake analyses.


  • Open Access

    Analysis of a June 2023 Smoke Transport over the Northeast US Caused by Wildfires in Canada- leveraging the HRRR-Smoke model predictions and remote sensing observations.

    by Yelena Pichugina, Edward Strobach, Alan Brewer, Ravan Ahmadov, Partha Sarathi Bhattacharjee, Eric James, Jordan Schnell, Brian J. Carroll, Sunil Baidar, Scott P. Sandberg

    The intensification of wildland fires across portions of Canada in early June 2023 led to significant smoke transport into the eastern United States, resulting in poor air quality and reduced visibility. Significant degradation of air quality was evident from PM2.5 surface measurements along the smoke plume as it moved southwards, which was confirmed by satellite data and the operational HRRR-Smoke model. The availability of Doppler lidar data and the publicity surrounding the poor conditions in Washington DC led to a focused effort addressing the timing and enhancement of smoke in the nation’s capital. The predictive skill of the operational HRRR-Smoke model was evaluated against wind profile and PM2.5 surface measurements. In general, the HRRR-Smoke forecast accurately predicted the meteorological conditions, particularly the diurnal evolution of regional winds and boundary layer depth. Despite capturing the diurnal evolution of winds, errors were still seen in the wind shear structure and magnitude (biases ranged between ± 2 m s-1and ± 4 m s-1). In terms of air quality, good agreement was found between modeled and observed PM2.5 concentrations at four sites in Washington DC. Confidence in modeled winds and PM2.5 allowed HRRR-Smoke to be used to determine the development of a lee trough as a regional transport mechanism for circulating smoke into Washington DC and leading to bad air quality.

  • Open Access

    Supplementary material to "Emerging mobile lidar technology to study boundary-layer winds influenced by operating turbines"

    by Yelena L. Pichugina, Alan W. Brewer, Sunil Baidar, Robert Banta, Edward Strobach, Brandi McCarty, Brian Carroll, Nicola Bodini, Stefano Letizia, Richard Marchbanks, et al.

  • Open Access

    Emerging mobile lidar technology to study boundary-layer winds influenced by operating turbines

    by Yelena L. Pichugina, Alan W. Brewer, Sunil Baidar, Robert Banta, Edward Strobach, Brandi McCarty, Brian Carroll, Nicola Bodini, Stefano Letizia, Richard Marchbanks, et al.

    The development of a microjoule-class pulsed Doppler lidar and deployment of this compact system on mobile platforms such as aircraft, ships, or trucks has opened a new opportunity to characterize the dynamics of complex mesoscale wind flows. The PickUp-based Mobile Atmospheric Sounder (PUMAS) truck-based lidar system was recently used during the American Wake Experiment (AWAKEN) to assess the general structure of boundary-layer wind and turbulence around wind turbines in central Oklahoma. Wind speed profiles averaged over PUMAS transects influenced by the operating turbines (waked flow) show a 1–2 m s-1 reduction compared to mean undisturbed (free flow) wind speed profiles. Spatial variability of wind speed was observed in time-height cross sections at different distances from turbines. The wind speeds were about 9–12 m s-1 at 6 km distance compared to 5–7 m s-1 at the transects near the turbines. The PUMAS dataset from AWAKEN demonstrated the capability of the mobile Doppler lidar system to document spatial variability of wind flows at different distances from wind turbines and obtain quantitative estimates of wind speed reduction in the waked flow. The high-frequency, simultaneous measurements of the horizontal and vertical winds provide a new approach for characterizing dynamic processes critical for wind farm wake analyses.

  • Open Access

    Wildfire Smoke Shading Observations: Impacts on Boundary Layer Mixing and Thermally Driven Smoke Transport

    by Brian J. Carroll, Edward Strobach, Sunil Baidar, Maxwell W. Holloway, Brandi McCarty, Richard Marchbanks, W. Alan Brewer

    Smoke shading from wildfire smoke cools the surface and atmosphere below the smoke by absorbing and scattering sunlight. This has the potential to create meteorological feedback and large air quality impacts, but observations of smoke shading and induced local flows are rare. Mobile truck‐based Doppler lidar observations during the California Fire Dynamics Experiment (CalFiDE) in August and September 2022 provide a novel data set of smoke shading events. The truck‐based lidar conducted measurements of horizontal and vertical winds while underway, along with qualitative smoke backscatter, allowing a study of boundary layer (BL) dynamics in and out of the smoke shaded areas. An in situ temperature sensor on the truck recorded air temperature. Smoke shaded versus clear‐sky temperature differences of up to 8°C were observed over 12 km along a valley floor in complex terrain. Using vertical velocity variance as a measure of turbulent mixing, smoke shading reduced BL mixing by up to two orders of magnitude, preventing the development of an afternoon convective BL in some cases. Temperature gradients also resulted in thermally driven flows wherein the cold smoky air mass undercut warmer ambient air. One density current case was observed with a strong opposing flow resulting in a convergent updraft and shear‐induced vortices atop the smoke‐filled density current. In another case, the flow was impeded by complex terrain resulting in a slower‐moving smoke front and a temperature gradient that lagged behind the front.


  • Open Access

    The 3D Dynamics of a Wildfire Plume Extending Across the Top of the Planetary Boundary Layer Using an Airborne Doppler Lidar

    by E. J. Strobach, S. Baidar, B. J. Carroll, W. A. Brewer

    As wildfire pervasiveness increases with a changing climate, there is a need to develop new techniques with emerging technologies to understand the interaction between wildfires and the surrounding atmosphere at a high spatiotemporal resolution. The Fire Influence on Regional to Global Environments and Air Quality (FIREX‐AQ) experiment conducted in 2019 focused on wildfires using several measurement platforms aboard aircraft. In this study, we interpret wind measurements across a smoke plume transported vertically and advected along the top of the boundary layer (BL) from an airborne Doppler lidar (DL). Flight transects parallel and perpendicular to the orientation of the plume enabled the characterization of key features such as a fire‐induced spanwise vortex, large downdrafts that modified the smoke plume, and the evolving velocity structure at different distances downwind of the fire‐induced convergence zone (FICZ) at an unprecedented horizontal and vertical resolution of 10s of meters.


  • Open Access

    The 3D Dynamics of a Wildfire Plume Contained Within the Planetary Boundary Layer Using an Airborne Doppler Lidar

    by Edward Strobach, Sunil Baidar, Brian J. Carroll, Alan Brewer

    As wildfire pervasiveness increases with a changing climate, there is a need to develop new techniques with emerging technologies to understand the interaction between wildfires and the surrounding atmosphere at a high spatiotemporal resolution. The Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) experiment conducted in 2019 focused on wildfires using several measurement platforms aboard aircraft. In this study, we interpret wind measurements across a boundary layer (BL) trapped smoke plume from an airborne Doppler lidar (DL). Flight transects parallel and perpendicular to the orientation of the plume enabled the characterization of key features such as a fire-induced spanwise vortex, large downdrafts that modified the smoke plume, and the evolving velocity structure at different distances downwind of the fire-induced convergence zone (FICZ) at an unprecedented horizontal and vertical resolution of 10s of meters.