Andreas Lindenmann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Andreas Lindenmann has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Sven Matthiesen
Karlsruhe Institute of Technology, Karlsruhe, Germany
11 shared publications - Johannes Sänger
IPEK-Institute of Product Engineering, Karlsruhe Institute of Technology (KIT), Kaiserstraße 10, 76131 Karlsruhe, Germany
4 shared publications - David Scherb
Engineering Design, Friedrich-Alexander-Universität Erlangen Nürnberg, Germany
3 shared publications - Jörg Miehling
Chair of Engineering Design, Friedrich-Alexander Universität Erlangen-Nürnberg, Erlangen, Germany
3 shared publications - Robert Weidner
TU Bergakademie Freiberg, Automated and Autonomous Systems, Freiberg, Germany and Helmut-Schmidt-University/University of the Federal Armed Forces Hamburg, Laboratory of Manufacturing Technology, Hamburg, Germany
3 shared publications - Sandro Wartzack
Engineering Design, Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
3 shared publications
Latest Publications
- Open Access
- 17 February 2026
- Published by Ubiquity Press, Ltd. in Journal of Cognition
- Vol. 9 (1)
Continuous Hand-Arm Vibrations Do Not Interfere with Cognitive Processing
When humans engage in closely coupled human-machine interactions, they often experience hand-arm vibrations, which are a byproduct of the running machine. Yet, in closely coupled human-machine interactions, it is important to ensure that human attention and cognition remains sufficiently high to avoid accidents and to achieve a good performance. The aim of the present study was to examine whether hand-arm vibrations impact on cognitive processing. In two studies, we investigated the impact of constant or random vibration compared to a baseline condition without vibration on selective attention. In detail, we assessed overall performance (RT and error rates) and the congruency effect in a flanker task (Experiment 1) and a temporal flanker task (Experiment 2). In Experiment 2, we additionally explored experienced vibration comfort and discomfort, two constructs often considered in ergonomics. In both experiments hand-arm vibrations neither affected mean response times nor proportion of correct responses. Additionally, hand-arm vibrations did not modulate the congruency effect. Experiment 2 revealed that vibration comfort and discomfort seem to correlate with task-performance. We conclude that hand-arm vibrations in general do not impact on cognitive processing, but it seems important to consider which vibration is selected to achieve optimal performance depending on user experience.
- 17 February 2026
- Published by Ubiquity Press, Ltd. in Journal of Cognition
- Vol. 9 (1)
Open AccessContinuous Hand-Arm Vibrations Do Not Interfere with Cognitive Processing
When humans engage in closely coupled human-machine interactions, they often experience hand-arm vibrations, which are a byproduct of the running machine. Yet, in closely coupled human-machine interactions, it is important to ensure that human attention and cognition remains sufficiently high to avoid accidents and to achieve a good performance. The aim of the present study was to examine whether hand-arm vibrations impact on cognitive processing. In two studies, we investigated the impact of constant or random vibration compared to a baseline condition without vibration on selective attention. In detail, we assessed overall performance (RT and error rates) and the congruency effect in a flanker task (Experiment 1) and a temporal flanker task (Experiment 2). In Experiment 2, we additionally explored experienced vibration comfort and discomfort, two constructs often considered in ergonomics. In both experiments hand-arm vibrations neither affected mean response times nor proportion of correct responses. Additionally, hand-arm vibrations did not modulate the congruency effect. Experiment 2 revealed that vibration comfort and discomfort seem to correlate with task-performance. We conclude that hand-arm vibrations in general do not impact on cognitive processing, but it seems important to consider which vibration is selected to achieve optimal performance depending on user experience.
- 2 August 2024
- Published by Springer Nature
- p. 177-214
Die Testing-Umgebung
- Open Access
- 19 March 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (6) , 2573
A Co-Simulation Model Integrating a Musculoskeletal Human Model with Exoskeleton and Power Tool Model
Working at and above head height with a power tool represents a common activity in craft and assembly applications. To assist and protect the user from overload and injuries in these situations, the development and use of application-specific support systems, such as exoskeletons and power tools, have greatly increased in recent years. Thus, the integration of aspects of the user-centered product development of support systems in the early phases of product development process has high potentials. A common approach to integrate the user early in the product development process is the use of musculoskeletal human models, which allow the evaluation of effects on the human body. This could also be applicable in the mentioned use case to enable the evaluation of the interactions for the user. Therefore, a co-simulation model for virtual modelling and simulating human–machine interactions is presented. The co-simulation model is made up of a musculoskeletal human model and the models of the technical systems (exoskeleton and power tool). By applying the co-simulation model, the impact of technical systems on the human body can be taken into account to derive design alternatives for the technical system due to the requirements of the user. The paper describes the design of the co-simulation model and particularly, the interaction of the submodels. The evaluation of the co-simulation model is carried out with the help of a subject study for the selected use case working at and above head height. The results show plausible results for the muscle loads considering the support by an exoskeleton. Furthermore, the comparison of simulated results to measured muscle activations via surface electromyography shows a good agreement. Thus, the co-simulation model passes the test for functionality and seems to be applicable for the derivation of design alternatives of technical systems regarding the user needs. In future, the co-simulation model will be further validated with a higher number of subjects and to implement design alterations in the technical systems.
- 19 March 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (6) , 2573
Open AccessA Co-Simulation Model Integrating a Musculoskeletal Human Model with Exoskeleton and Power Tool Model
Working at and above head height with a power tool represents a common activity in craft and assembly applications. To assist and protect the user from overload and injuries in these situations, the development and use of application-specific support systems, such as exoskeletons and power tools, have greatly increased in recent years. Thus, the integration of aspects of the user-centered product development of support systems in the early phases of product development process has high potentials. A common approach to integrate the user early in the product development process is the use of musculoskeletal human models, which allow the evaluation of effects on the human body. This could also be applicable in the mentioned use case to enable the evaluation of the interactions for the user. Therefore, a co-simulation model for virtual modelling and simulating human–machine interactions is presented. The co-simulation model is made up of a musculoskeletal human model and the models of the technical systems (exoskeleton and power tool). By applying the co-simulation model, the impact of technical systems on the human body can be taken into account to derive design alternatives for the technical system due to the requirements of the user. The paper describes the design of the co-simulation model and particularly, the interaction of the submodels. The evaluation of the co-simulation model is carried out with the help of a subject study for the selected use case working at and above head height. The results show plausible results for the muscle loads considering the support by an exoskeleton. Furthermore, the comparison of simulated results to measured muscle activations via surface electromyography shows a good agreement. Thus, the co-simulation model passes the test for functionality and seems to be applicable for the derivation of design alternatives of technical systems regarding the user needs. In future, the co-simulation model will be further validated with a higher number of subjects and to implement design alterations in the technical systems.
- Open Access
A Novel Approach to Simulating Realistic Exoskeleton Behavior in Response to Human Motion
Simulation models are a valuable tool for exoskeleton development, especially for system optimization and evaluation. It allows an assessment of the performance and effectiveness of exoskeletons even at an early stage of their development without physical realization. Due to the closed physical interaction between the exoskeleton and the user, accurate modeling of the human–exoskeleton interaction in defined scenarios is essential for exoskeleton simulations. This paper presents a novel approach to simulate exoskeleton motion in response to human motion and the interaction forces at the physical interfaces between the human and the exoskeleton. Our approach uses a multibody model of a shoulder exoskeleton in MATLAB R2021b and imports human motion via virtual markers from a digital human model to simulate human–exoskeleton interaction. To validate the human-motion-based approach, simulated exoskeleton motion and interaction forces are compared with experimental data from a previous lab study. The results demonstrate the feasibility of our approach to simulate human–exoskeleton interaction based on human motion. In addition, the approach is used to optimize the support profile of an exoskeleton, indicating its potential to assist exoskeleton development prior to physical prototyping.
Open AccessA Novel Approach to Simulating Realistic Exoskeleton Behavior in Response to Human Motion
Simulation models are a valuable tool for exoskeleton development, especially for system optimization and evaluation. It allows an assessment of the performance and effectiveness of exoskeletons even at an early stage of their development without physical realization. Due to the closed physical interaction between the exoskeleton and the user, accurate modeling of the human–exoskeleton interaction in defined scenarios is essential for exoskeleton simulations. This paper presents a novel approach to simulate exoskeleton motion in response to human motion and the interaction forces at the physical interfaces between the human and the exoskeleton. Our approach uses a multibody model of a shoulder exoskeleton in MATLAB R2021b and imports human motion via virtual markers from a digital human model to simulate human–exoskeleton interaction. To validate the human-motion-based approach, simulated exoskeleton motion and interaction forces are compared with experimental data from a previous lab study. The results demonstrate the feasibility of our approach to simulate human–exoskeleton interaction based on human motion. In addition, the approach is used to optimize the support profile of an exoskeleton, indicating its potential to assist exoskeleton development prior to physical prototyping.
- Open Access
ApOL-Application Oriented Workload Model for Digital Human Models for the Development of Human-Machine Systems
Since musculoskeletal disorders are one of the most common work-related diseases for assemblers and machine operators, it is crucial to find new ways to alleviate the physical load on workers. Support systems such as exoskeletons or handheld power tools are promising technology to reduce the physical load on the humans. The development of such systems requires consideration of the interactions between human and technical systems. The physical relief effect of the exoskeleton can be demonstrated in experimental studies or by simulation with the digital human model (DHM). For the digital development of these support systems, an application-oriented representation of the workload is necessary. To facilitate digital development, an application-oriented workload model (ApOL model) of an overhead working task is presented. The ApOL model determines the load (forces, torques) onto the DHM during an overhead screw-in task using a cordless screwdriver, based on experimental data. The ApOL model is verified by comparing the simulated results to the calculated values from a mathematical model, using experimental data from three participants. The comparison demonstrates successful verification, with a maximum relative mean-absolute-error (rMAE) of the relevant load components at 11.4%. The presented ApOL model can be utilized to assess the impact of cordless screwdriver design on the human workload and facilitate a strain-based design approach for support systems e.g., exoskeletons.
Open AccessApOL-Application Oriented Workload Model for Digital Human Models for the Development of Human-Machine Systems
Since musculoskeletal disorders are one of the most common work-related diseases for assemblers and machine operators, it is crucial to find new ways to alleviate the physical load on workers. Support systems such as exoskeletons or handheld power tools are promising technology to reduce the physical load on the humans. The development of such systems requires consideration of the interactions between human and technical systems. The physical relief effect of the exoskeleton can be demonstrated in experimental studies or by simulation with the digital human model (DHM). For the digital development of these support systems, an application-oriented representation of the workload is necessary. To facilitate digital development, an application-oriented workload model (ApOL model) of an overhead working task is presented. The ApOL model determines the load (forces, torques) onto the DHM during an overhead screw-in task using a cordless screwdriver, based on experimental data. The ApOL model is verified by comparing the simulated results to the calculated values from a mathematical model, using experimental data from three participants. The comparison demonstrates successful verification, with a maximum relative mean-absolute-error (rMAE) of the relevant load components at 11.4%. The presented ApOL model can be utilized to assess the impact of cordless screwdriver design on the human workload and facilitate a strain-based design approach for support systems e.g., exoskeletons.
- Open Access
Influence of Coupling Forces and Body Posture on the Rotational Hand–Arm Impedance in yh Direction
This manuscript investigates the rotational mechanical impedance of the human hand–arm system with respect to vibration excitation around the gripping axis of the hand under the influence of body posture, gripping force, and push force. Knowledge of rotational mechanical impedance is required for deriving models of hand–arm biodynamics. These models are used in the validation of power tools to predict further vibrational human–machine interactions. In the current state of research, such models exist for translational but not rotational vibration excitation. Consequently, this study investigates the properties of a hand–arm system with respect to rotational vibration excitation. In the study, the rotational impedance of the hand–arm systems of 13 adults was measured at various gripping and push forces applied in different body postures. The setup of the test used in this study consisted of a shaker that applied rotational vibrations at certain frequencies to the subjects’ hand–arm systems via a cylindrical handle. The results of the study indicate a spring–damper dynamic of the hand–arm system. The gripping force strongly influences the magnitude of rotational impedance across the frequency spectrum. Regarding push force and posture, no corresponding influence could be determined. The results suggest that the frictional contact between the hand and handle might confer a damping effect.
Open AccessInfluence of Coupling Forces and Body Posture on the Rotational Hand–Arm Impedance in yh Direction
This manuscript investigates the rotational mechanical impedance of the human hand–arm system with respect to vibration excitation around the gripping axis of the hand under the influence of body posture, gripping force, and push force. Knowledge of rotational mechanical impedance is required for deriving models of hand–arm biodynamics. These models are used in the validation of power tools to predict further vibrational human–machine interactions. In the current state of research, such models exist for translational but not rotational vibration excitation. Consequently, this study investigates the properties of a hand–arm system with respect to rotational vibration excitation. In the study, the rotational impedance of the hand–arm systems of 13 adults was measured at various gripping and push forces applied in different body postures. The setup of the test used in this study consisted of a shaker that applied rotational vibrations at certain frequencies to the subjects’ hand–arm systems via a cylindrical handle. The results of the study indicate a spring–damper dynamic of the hand–arm system. The gripping force strongly influences the magnitude of rotational impedance across the frequency spectrum. Regarding push force and posture, no corresponding influence could be determined. The results suggest that the frictional contact between the hand and handle might confer a damping effect.
- 7 October 2022
- Published by Elsevier in International Journal of Industrial Ergonomics
- Vol. 92
Effect of high level grip-and push force and elevated arm posture on the zh-axis hand-arm impedance
- 7 October 2022
- Published by Elsevier in International Journal of Industrial Ergonomics
- Vol. 92
Effect of high level grip-and push force and elevated arm posture on the zh-axis hand-arm impedance
- 1 February 2022
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 168
Influence of friction bearings on the frequency response of a variable stiffness mechanism
- 1 February 2022
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 168
Influence of friction bearings on the frequency response of a variable stiffness mechanism
- 1 January 2022
- Published by Elsevier in Applied Ergonomics
- Vol. 98, 103575
Use of data-driven design for the development of knob-shaped handles in the context of impedance measurements
- 1 January 2022
- Published by Elsevier in Applied Ergonomics
- Vol. 98, 103575
Use of data-driven design for the development of knob-shaped handles in the context of impedance measurements