Ye Yang
Research Subjects
Ye Yang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Yong Zhao
Fujian Normal University
3 shared publications C. H. Cheng
Key Laboratory of Magnetic Levitation Technologies and Maglev Trains, Superconductivity and New Energy R&D Center, Southwest Jiaotong University, Chengdu, China
1 shared publicationC. Ke
Key Laboratory of Magnetic Levitation Technologies and Maglev Trains, Superconductivity and New Energy R&D Center, Southwest Jiaotong University, Chengdu, China
1 shared publication- Chunguang Li1 shared publication
- Guodong Cui
Key Laboratory of Advanced Technology of Materials of Education Ministry, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China
1 shared publication H. H. Sun
Key Laboratory of Magnetic Levitation Technologies and Maglev Trains, Superconductivity and New Energy R&D Center, Southwest Jiaotong University, Chengdu, China
1 shared publication
Latest Publications
- Open Access
- 27 May 2026
- Published by Elsevier in SSRN Electronic Journal
High performance MgB2 achieved through the synergistic doping of citric acid and TiB2
Carbon doping plays an irreplaceable role in improving the superconducting current carrying performance of MgB2. However, due to various reasons, carbon doping usually has a significant effect on improving the high-field performance of MgB2, while its improvement effect on low- field performance is poor, and even has a negative effect. In this article, a citric acid and TiB2 co-doping technology is developed, which avoids adverse factors such as carbon aggregation while retaining the advantages of carbon doping, and further enhances the coupling between MgB2 particles through TiB2 doping. The results show that such co-doping technology maintains the respective advantages of the two dopants, forming a synergistic enhanced doping effect. As a result, at 5 K, the Jc value of the co-doped MgB2 reaches 1.03×105 A/cm2 at 4 T, which was 194.3% higher than the 0.35×105 A/cm2 of undoped one. And at 20 K, its Jc value reach 2.08×105 A/cm2 in 1 T field, which is 47.5% higher than 1.41×105 A/cm2 of pristine MgB2 in the same conditions. By analyzing the scaling behavior of magnetic flux pinning force, the key mechanism of using co-doping to enhance the performance of MgB2 was elucidated, which includes following points: (1) TiB2 doping enhances the performance in low and medium fields by strengthening grain coupling of MgB2; (2) Citric acid doping enhances the high field performance of MgB2 by introducing more grain boundary pinning centers as well as improving Hirr of MgB2; (3) The synergistic effect of these two dopants significantly improves the performance of the co-doped MgB2 across the entire magnetic field range. This synergistic performance enhancement through TiB2 and citric acid co-doping provides valuable new route for further improving the superconducting properties of MgB2.
- 27 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessHigh performance MgB2 achieved through the synergistic doping of citric acid and TiB2
Carbon doping plays an irreplaceable role in improving the superconducting current carrying performance of MgB2. However, due to various reasons, carbon doping usually has a significant effect on improving the high-field performance of MgB2, while its improvement effect on low- field performance is poor, and even has a negative effect. In this article, a citric acid and TiB2 co-doping technology is developed, which avoids adverse factors such as carbon aggregation while retaining the advantages of carbon doping, and further enhances the coupling between MgB2 particles through TiB2 doping. The results show that such co-doping technology maintains the respective advantages of the two dopants, forming a synergistic enhanced doping effect. As a result, at 5 K, the Jc value of the co-doped MgB2 reaches 1.03×105 A/cm2 at 4 T, which was 194.3% higher than the 0.35×105 A/cm2 of undoped one. And at 20 K, its Jc value reach 2.08×105 A/cm2 in 1 T field, which is 47.5% higher than 1.41×105 A/cm2 of pristine MgB2 in the same conditions. By analyzing the scaling behavior of magnetic flux pinning force, the key mechanism of using co-doping to enhance the performance of MgB2 was elucidated, which includes following points: (1) TiB2 doping enhances the performance in low and medium fields by strengthening grain coupling of MgB2; (2) Citric acid doping enhances the high field performance of MgB2 by introducing more grain boundary pinning centers as well as improving Hirr of MgB2; (3) The synergistic effect of these two dopants significantly improves the performance of the co-doped MgB2 across the entire magnetic field range. This synergistic performance enhancement through TiB2 and citric acid co-doping provides valuable new route for further improving the superconducting properties of MgB2.
- 19 November 2021
- Published by Springer Nature in Journal of Superconductivity and Novel Magnetism
- Vol. 35 (2) , 415-422
Influence of Hydrocarbon Doping on Critical Current Density and Percolation Behavior of MgB2
- 19 November 2021
- Published by Springer Nature in Journal of Superconductivity and Novel Magnetism
- Vol. 35 (2) , 415-422
Influence of Hydrocarbon Doping on Critical Current Density and Percolation Behavior of MgB2
- 29 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (8) , 1-5
Optimization of a Cryogen-Free Superconducting Prototype Generator With YBCO Field Windings
This is a follow-up study of the cryogen-free superconducting prototype generator with YBCO field windings. The previous paper had introduced the design of the structure, cryogenic system and electromagnetic characteristics of the prototype machine, whose operating temperature was 30 K, maximum field current was 100 A and rotating speed was from 10 to 30 rpm. In this paper, the optimization of the airgap magnetic field and the stability of superconducting magnet have been carried out. For the purpose of increasing utilization of the magnetic field of superconducting windings, its support structure and vacuum chamber of the cryostat had been upgraded in order to reduce the physical airgap between the armature teeth and the vacuum chamber room temperature wall from 10 mm to 2 mm. In addition, a new coil curing method, vacuum impregnation process with paraffin, had been applied while the YBCO coil fabrication, to improve its stability. The performance properties of the optimized system as well as the comparison between FEM simulation and experimental results are finally presented.
- 29 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (8) , 1-5
Optimization of a Cryogen-Free Superconducting Prototype Generator With YBCO Field Windings
This is a follow-up study of the cryogen-free superconducting prototype generator with YBCO field windings. The previous paper had introduced the design of the structure, cryogenic system and electromagnetic characteristics of the prototype machine, whose operating temperature was 30 K, maximum field current was 100 A and rotating speed was from 10 to 30 rpm. In this paper, the optimization of the airgap magnetic field and the stability of superconducting magnet have been carried out. For the purpose of increasing utilization of the magnetic field of superconducting windings, its support structure and vacuum chamber of the cryostat had been upgraded in order to reduce the physical airgap between the armature teeth and the vacuum chamber room temperature wall from 10 mm to 2 mm. In addition, a new coil curing method, vacuum impregnation process with paraffin, had been applied while the YBCO coil fabrication, to improve its stability. The performance properties of the optimized system as well as the comparison between FEM simulation and experimental results are finally presented.