Uriel Victoria Martínez
Uriel Victoria Martínez has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Laura Angélica Lancón Rivera
Universidad Autónoma Metropolitana
2 shared publications - Sandra Loera-Serna
Universidad Autónoma Metropolitana
2 shared publications Anaid Carro Gastélum
Universidad Autónoma Metropolitana Unidad Azcapotzalco
1 shared publication- D. Saldaña-Cantarey
Laboratorio de Análisis y Diseño Acústico, Universidad Autónoma Metropolitana, Azcapotzalco, México
1 shared publication - Ernesto Rodrigo Vázquez Cerón
Laboratorio de Análisis y Diseño Acústico, Universidad Autónoma Metropolitana, Azcapotzalco, México
1 shared publication - Iván Erick Castañeda-Robles
Universidad Autónoma del Estado de Hidalgo
1 shared publication
Latest Publications
- Open Access
- 2 October 2026
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 23 (1)
Acoustic Evaluation of Starch Polymer Composites Reinforced with Reed and Coconut Fibers
- 2 October 2026
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 23 (1)
Open AccessAcoustic Evaluation of Starch Polymer Composites Reinforced with Reed and Coconut Fibers
- Open Access
- 11 August 2026
- Published by Universidad Nacional Autonoma de Mexico in Mundo Nano. Revista Interdisciplinaria en Nanociencias y Nanotecnología
- Vol. 20 (38) , e69919
Orientación de las arrugas en películas de óxido de grafeno tras el depósito por vertido
Este artículo analiza la formación y la orientación de las arrugas en películas de óxido de grafeno (GO, por sus siglas en inglés) obtenidas mediante vertido manual, con el objetivo de comprender los mecanismos de autoensamblaje durante el secado. Para ello, se prepararon películas de GO sobre sustratos de politetrafluoroetileno y se caracterizaron mediante microscopía óptica polarizada (POM, por sus siglas en inglés) y microscopía electrónica de barrido (SEM, por sus siglas en inglés). La orientación de las arrugas se cuantificó mediante procesamiento digital de imágenes utilizando ImageJ y el complemento OrientationJ. Los resultados muestran que la distribución de las arrugas no es aleatoria, sino que presenta una orientación preferencial con dos direcciones principales separadas aproximadamente 90°, indicando una disposición perpendicular dominante. Este comportamiento es compatible con el desarrollo de tensiones mecánicas anisotrópicas durante el secado, asociadas con la contracción del material y la reorganización de las hojuelas de GO. Estos hallazgos contribuyen a la comprensión de la organización mesoscópica de materiales laminares durante procesos de autoensamblaje y secado.
- 11 August 2026
- Published by Universidad Nacional Autonoma de Mexico in Mundo Nano. Revista Interdisciplinaria en Nanociencias y Nanotecnología
- Vol. 20 (38) , e69919
Open AccessOrientación de las arrugas en películas de óxido de grafeno tras el depósito por vertido
Este artículo analiza la formación y la orientación de las arrugas en películas de óxido de grafeno (GO, por sus siglas en inglés) obtenidas mediante vertido manual, con el objetivo de comprender los mecanismos de autoensamblaje durante el secado. Para ello, se prepararon películas de GO sobre sustratos de politetrafluoroetileno y se caracterizaron mediante microscopía óptica polarizada (POM, por sus siglas en inglés) y microscopía electrónica de barrido (SEM, por sus siglas en inglés). La orientación de las arrugas se cuantificó mediante procesamiento digital de imágenes utilizando ImageJ y el complemento OrientationJ. Los resultados muestran que la distribución de las arrugas no es aleatoria, sino que presenta una orientación preferencial con dos direcciones principales separadas aproximadamente 90°, indicando una disposición perpendicular dominante. Este comportamiento es compatible con el desarrollo de tensiones mecánicas anisotrópicas durante el secado, asociadas con la contracción del material y la reorganización de las hojuelas de GO. Estos hallazgos contribuyen a la comprensión de la organización mesoscópica de materiales laminares durante procesos de autoensamblaje y secado.
- Open Access
- 5 December 2025
- Published by Universidad Autonoma del Estado de Hidalgo in Pädi Boletín Científico de Ciencias Básicas e Ingenierías del ICBI
- Vol. 13 (Especial3) , 287-294
Análisis de las propiedades acústicas de tabicón para uso no estructural elaborado con residuos de Noryl
El confort acústico en edificaciones es un factor que impacta en la calidad de vida de las personas. Por otro lado, la incorporación de residuos industriales en elementos constructivos ofrece una alternativa sostenible para mejorar las características de dichos elementos. En este estudio se diseñaron tabicones elaborados con residuos industriales de noryl con el objetivo de analizar su comportamiento con respecto a sus propiedades acústicas. Se fabricaron especímenes modificados para evaluar su capacidad mecánica como elemento no estructural y, posteriormente, se sometieron a ensayos acústicos para determinar su eficacia en la reducción de ruido exterior. Los resultados cuantitativos confirmaron un desempeño mecánico adecuado segun las normas mexicanas aplicables y un comportamiento acústico favorable para control de ruido en frecuencias del habla y componentes agudos.
- 5 December 2025
- Published by Universidad Autonoma del Estado de Hidalgo in Pädi Boletín Científico de Ciencias Básicas e Ingenierías del ICBI
- Vol. 13 (Especial3) , 287-294
Open AccessAnálisis de las propiedades acústicas de tabicón para uso no estructural elaborado con residuos de Noryl
El confort acústico en edificaciones es un factor que impacta en la calidad de vida de las personas. Por otro lado, la incorporación de residuos industriales en elementos constructivos ofrece una alternativa sostenible para mejorar las características de dichos elementos. En este estudio se diseñaron tabicones elaborados con residuos industriales de noryl con el objetivo de analizar su comportamiento con respecto a sus propiedades acústicas. Se fabricaron especímenes modificados para evaluar su capacidad mecánica como elemento no estructural y, posteriormente, se sometieron a ensayos acústicos para determinar su eficacia en la reducción de ruido exterior. Los resultados cuantitativos confirmaron un desempeño mecánico adecuado segun las normas mexicanas aplicables y un comportamiento acústico favorable para control de ruido en frecuencias del habla y componentes agudos.
- Open Access
- 3 March 2023
- Published by Universidad Autonoma Metropolitana
Estudio de compósitos de fibras naturales y arcilla para aplicaciones acústicas
During the last decade, actions and studies to counteract the effects of noise have increased through the use of insulating or absorbent materials, and civil regulations based on monitoring in urban areas, since exposure to high levels of sound pressure can cause psychological and physiological health problems such as anxiety, depression, stress, fatigue, cardiac, hearing or cognitive problems, as well as irreversible hearing loss. This work aims to develop and study natural compounds made of clay reinforced with coconut or nopal fibers to analyze their acoustic coefficients and determine their applications as insulation or conditioning material. The composites were obtained incorporating 25, 50 and 75% by weight of each fiber with bentonite clay. The physical and chemical characterization of the composites was performed by X-ray diffraction (XRD), scanning electron microscopy (SEM), optical microscopy, Fourier transforms infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). The properties of hardness and apparent density of the composites were obtained from samples aged three months. Using XRD, the compounds were identified in the bentonite: montmorillonite, quartz and feldspar. The FT-IR allowed the identification of the functional groups of the clay and for the fibers the presence of lignin and hemicellulose was determined. Micrographs show that coconut fiber is more porous than nopal; the size of the nopal fibers was between 71.8 and 219.7 nm (electron microscopy) and that of the coconut fibers was 0.1613 mm (optical microscopy). The apparent density of the composites follows the model of the mixture rule, while the hardness changes very little in the samples prepared with nopal fiber. Through ATG it was found that bentonite improves the thermal stability of the composites. The acoustic absorption, reflection, and transmission coefficients of the materials were determined using the impedance tube method, in the range of 50 to 10,000 Hz. The samples obtained after the synthesis process was weighed and characterized in the impedance tube; For the humidity tests, a drop was placed on the surface of the sample and the characterization process was repeated. These tests were carried out until 4 drops of water were added to each composite. The results showed an increase in the acoustic absorption properties when adding the fibers in the composites, where it was observed that the coconut fiber presented a higher sound absorption than the nopal fiber. The hardness and density of the material are directly related to a reduction in the absorption coefficient, although the tests carried out show that the nopal fibers in the composites do not increase their hardness and their acoustic properties, unlike coconut fibers. The results obtained from the acoustic characterization carried out in the surface humidity test showed that the absorption, reflection and absorption coefficients of the coconut change with increasing humidity in the samples. While, in the case of nopal, due to its composition and hydrophobic properties, there is no significant variation in its acoustic properties. Composites made from coconut fiber have better acoustic absorption and reduction properties, while those made from nopal fiber stand out in terms of sound reflection.
- 3 March 2023
- Published by Universidad Autonoma Metropolitana
Open AccessEstudio de compósitos de fibras naturales y arcilla para aplicaciones acústicas
During the last decade, actions and studies to counteract the effects of noise have increased through the use of insulating or absorbent materials, and civil regulations based on monitoring in urban areas, since exposure to high levels of sound pressure can cause psychological and physiological health problems such as anxiety, depression, stress, fatigue, cardiac, hearing or cognitive problems, as well as irreversible hearing loss. This work aims to develop and study natural compounds made of clay reinforced with coconut or nopal fibers to analyze their acoustic coefficients and determine their applications as insulation or conditioning material. The composites were obtained incorporating 25, 50 and 75% by weight of each fiber with bentonite clay. The physical and chemical characterization of the composites was performed by X-ray diffraction (XRD), scanning electron microscopy (SEM), optical microscopy, Fourier transforms infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). The properties of hardness and apparent density of the composites were obtained from samples aged three months. Using XRD, the compounds were identified in the bentonite: montmorillonite, quartz and feldspar. The FT-IR allowed the identification of the functional groups of the clay and for the fibers the presence of lignin and hemicellulose was determined. Micrographs show that coconut fiber is more porous than nopal; the size of the nopal fibers was between 71.8 and 219.7 nm (electron microscopy) and that of the coconut fibers was 0.1613 mm (optical microscopy). The apparent density of the composites follows the model of the mixture rule, while the hardness changes very little in the samples prepared with nopal fiber. Through ATG it was found that bentonite improves the thermal stability of the composites. The acoustic absorption, reflection, and transmission coefficients of the materials were determined using the impedance tube method, in the range of 50 to 10,000 Hz. The samples obtained after the synthesis process was weighed and characterized in the impedance tube; For the humidity tests, a drop was placed on the surface of the sample and the characterization process was repeated. These tests were carried out until 4 drops of water were added to each composite. The results showed an increase in the acoustic absorption properties when adding the fibers in the composites, where it was observed that the coconut fiber presented a higher sound absorption than the nopal fiber. The hardness and density of the material are directly related to a reduction in the absorption coefficient, although the tests carried out show that the nopal fibers in the composites do not increase their hardness and their acoustic properties, unlike coconut fibers. The results obtained from the acoustic characterization carried out in the surface humidity test showed that the absorption, reflection and absorption coefficients of the coconut change with increasing humidity in the samples. While, in the case of nopal, due to its composition and hydrophobic properties, there is no significant variation in its acoustic properties. Composites made from coconut fiber have better acoustic absorption and reduction properties, while those made from nopal fiber stand out in terms of sound reflection.
- 1 October 2021
- Published by Taylor & Francis in Instrumentation Science & Technology
- Vol. 50 (2) , 219-232
Quantification of the acoustic response of a material using an amplitude modulated wave train
Experimental configurations have been implemented to determine the acoustic response of a test material, based on the transfer function analysis, by using a chirp signal along an impedance tube covering a frequency response of 5 kHz. This work describes an experimental setup with two acoustic chambers which are tested to quantify the absorption coefficient in terms of the reflection and transmission responses in a frequency range up to 10 kHz. A modulated amplitude wave train, in which the frequency increases, is assessed to identify the response for each recorded signal and to calculate the acoustic coefficients from a steady state analysis. The length of the tube prevents the overlapping of acoustic waves, thereby removing the transient effects of a loudspeaker. The process requires a characterization protocol to quantify the attenuation coefficient of wave propagation, supported by four microphones placed flush at the inner diameter as a frequency response function. Three test materials, with high and low density, were characterized to compare their acoustic responses in frequency and time domains, which may be used to define their application in the architectural acoustic field and simulate the response by filtering a sound stimulus.
- 1 October 2021
- Published by Taylor & Francis in Instrumentation Science & Technology
- Vol. 50 (2) , 219-232
Quantification of the acoustic response of a material using an amplitude modulated wave train
Experimental configurations have been implemented to determine the acoustic response of a test material, based on the transfer function analysis, by using a chirp signal along an impedance tube covering a frequency response of 5 kHz. This work describes an experimental setup with two acoustic chambers which are tested to quantify the absorption coefficient in terms of the reflection and transmission responses in a frequency range up to 10 kHz. A modulated amplitude wave train, in which the frequency increases, is assessed to identify the response for each recorded signal and to calculate the acoustic coefficients from a steady state analysis. The length of the tube prevents the overlapping of acoustic waves, thereby removing the transient effects of a loudspeaker. The process requires a characterization protocol to quantify the attenuation coefficient of wave propagation, supported by four microphones placed flush at the inner diameter as a frequency response function. Three test materials, with high and low density, were characterized to compare their acoustic responses in frequency and time domains, which may be used to define their application in the architectural acoustic field and simulate the response by filtering a sound stimulus.