Diego E. Galvez-Aranda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Diego E. Galvez-Aranda has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Jorge M. Seminario
Department of Chemical Engineering, Texas A&M University, College Station, Texas 77843, United States of America
5 shared publications - Alejandro A. Franco
UMR CNRS, Université de Picardie Jules Verne, 15, rue Baudelocque, Amiens Cedex, France, 80039
4 shared publications Diana Zapata Dominguez
Laboratoire de Réactivité et Chimie des Solides (LRCS) UMR CNRS 7314 Université de Picardie Jules Verne, Hub de l'Energie 15 rue Baudelocque Amiens Cedex 80039 France
2 shared publications- Franco Martín Zanotto
Laboratoire de Réactivité et Chimie des Solides (LRCS)
2 shared publications Javier F. Troncoso
Laboratoire de Réactivité et Chimie des Solides (LRCS) UMR CNRS 7314 Université de Picardie Jules Verne, Hub de l'Energie 15 rue Baudelocque Amiens Cedex 80039 France
2 shared publications- Lucie Denisart
Laboratoire de Réactivité et Chimie des Solides (LRCS) UMR CNRS 7314 Université de Picardie Jules Verne, Hub de l'Energie 15 rue Baudelocque Amiens Cedex 80039 France
2 shared publications
Latest Publications
- Open Access
- 3 August 2026
- Published by Frontiers Media SA in Frontiers in Batteries and Electrochemistry
- Vol. 5, 1845442
First-principles study of electrolyte components stability and orientation on MoS2 surfaces: implications for SEI formation in sodium-ion batteries
The interfacial stability between electrolyte components and electrode materials plays a crucial role in the formation of the solid electrolyte interphase (SEI) in sodium-ion batteries. In this work, density functional theory (DFT) calculations are used to investigate the interface behavior and electronic interactions of five common electrolyte anions ( PF 6 − , BF 4 − , ClO 4 − , FSI − and TFSI − ) on MoS 2 surfaces. To capture the influence of electrochemical conditions, the surface is analyzed under three different Na concentrations corresponding to 0%, 50%, and 90% electrode degree of sodiation. Multiple interface orientations are considered for each molecule to evaluate interaction energies, charge redistribution, electron localization function, work function, and electronic structure modifications at the interface. The results reveal distinct interaction mechanisms depending on the anion and sodium content. BF 4 − exhibits strong interaction at low Na concentration, which weakens significantly upon sodiation. ClO 4 − shows a reduction in interaction strength despite relatively similar charge redistribution, accompanied by changes in electron localization associated with Na. In contrast, PF 6 − does not form a stable interface configuration and undergoes reorientation with increasing Na, favoring interactions with intercalated Na rather than the MoS 2 surface. TFSI − exhibits a strong dependence on molecular orientation, with more stable configurations associated with oxygen coordination. These findings provide atomistic insight into the evolution of interfacial interactions in sodiated MoS 2 and their possible implications for SEI formation in sodium-ion batteries.
- 3 August 2026
- Published by Frontiers Media SA in Frontiers in Batteries and Electrochemistry
- Vol. 5, 1845442
Open AccessFirst-principles study of electrolyte components stability and orientation on MoS2 surfaces: implications for SEI formation in sodium-ion batteries
The interfacial stability between electrolyte components and electrode materials plays a crucial role in the formation of the solid electrolyte interphase (SEI) in sodium-ion batteries. In this work, density functional theory (DFT) calculations are used to investigate the interface behavior and electronic interactions of five common electrolyte anions ( PF 6 − , BF 4 − , ClO 4 − , FSI − and TFSI − ) on MoS 2 surfaces. To capture the influence of electrochemical conditions, the surface is analyzed under three different Na concentrations corresponding to 0%, 50%, and 90% electrode degree of sodiation. Multiple interface orientations are considered for each molecule to evaluate interaction energies, charge redistribution, electron localization function, work function, and electronic structure modifications at the interface. The results reveal distinct interaction mechanisms depending on the anion and sodium content. BF 4 − exhibits strong interaction at low Na concentration, which weakens significantly upon sodiation. ClO 4 − shows a reduction in interaction strength despite relatively similar charge redistribution, accompanied by changes in electron localization associated with Na. In contrast, PF 6 − does not form a stable interface configuration and undergoes reorientation with increasing Na, favoring interactions with intercalated Na rather than the MoS 2 surface. TFSI − exhibits a strong dependence on molecular orientation, with more stable configurations associated with oxygen coordination. These findings provide atomistic insight into the evolution of interfacial interactions in sodiated MoS 2 and their possible implications for SEI formation in sodium-ion batteries.
- Open Access
- 14 June 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 688
Deep learning-enhanced physical modelling for tape-casting slurry microstructures of solid oxide cell substrates
- 14 June 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 688
Open AccessDeep learning-enhanced physical modelling for tape-casting slurry microstructures of solid oxide cell substrates
- 9 May 2026
- Published by IGI Global Scientific Publishing
- p. 137-172
Multiscale Modeling and Machine Learning-Driven Characterization of Degradation Mechanism in Li-Ion Battery Materials
Degradation in lithium-ion batteries (LIBs) arises from the coupling of phenomena that span multiple length scales from atomic-scale interatomic interactions to micrometer-scale particle morphologies and millimeter-scale electrode structures and time scales from femtosecond electronic rearrangements to year-long calendar aging. No single modeling or experimental technique is able to capture the entire spectrum. For example, bond breaking, defect migration and interfacial reactions occur at the electronic/atomic scale, while particle cracking, pore clogging, and electrolyte depletion emerge at the mesoscale, and capacity fade or impedance growth manifest at the cell/device scale. This inherently multiscale and multimodal nature of degradation demands an integrated modeling framework combining quantum mechanical, atomistic, mesoscopic, and continuum approaches.
- 9 May 2026
- Published by IGI Global Scientific Publishing
- p. 137-172
Multiscale Modeling and Machine Learning-Driven Characterization of Degradation Mechanism in Li-Ion Battery Materials
Degradation in lithium-ion batteries (LIBs) arises from the coupling of phenomena that span multiple length scales from atomic-scale interatomic interactions to micrometer-scale particle morphologies and millimeter-scale electrode structures and time scales from femtosecond electronic rearrangements to year-long calendar aging. No single modeling or experimental technique is able to capture the entire spectrum. For example, bond breaking, defect migration and interfacial reactions occur at the electronic/atomic scale, while particle cracking, pore clogging, and electrolyte depletion emerge at the mesoscale, and capacity fade or impedance growth manifest at the cell/device scale. This inherently multiscale and multimodal nature of degradation demands an integrated modeling framework combining quantum mechanical, atomistic, mesoscopic, and continuum approaches.
- 17 April 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (9)
A Combined Theoretical–Experimental Study of the Interfacial Stability and Conductivity of 4-Aminophenyl and 4-Nitrobenzene Linkers on Au Surfaces
Aryl diazonium electrografting enables robust covalent bonding of organic molecules to metallic and carbon-based substrates. Despite its widespread use, the influence of specific functional groups on the electrode–electrolyte interfacial response remains insufficiently understood. Once grafted, these molecules alter the electronic environment of the substrate, affecting interfacial stability, charge transfer, and interactions with the surrounding medium. On conductive metals, organic layers have often been reported to increase electron transfer resistance, and forming stable monolayers remains challenging due to the high reactivity of N≡N⁺ precursors. Here, we combine quantum chemistry calculations with impedance spectroscopy to investigate the interfacial behavior of 4-aminophenyl and 4-nitrobenzene groups grafted onto Au surfaces. Experimentally, 4-aminophenyl grafting decreases charge transfer resistance, while 4 nitrobenzene increases it. Theoretical analysis supports these observations by revealing differences in charge distribution at the interface, adsorption geometries, and bonding strength, clarifying the relative stability and electronic influence of each linker. Conductance is also evaluated in multiple electrode configurations, including systems where carbon nanotubes are linked to gold substrates. This combined theoretical–experimental approach demonstrates how atomistic analysis could guide the design of improved conductive interfaces and highlights the importance of quantum chemical methods for tailoring molecular anchoring and optimizing nanoscale electronic device performance.
- 17 April 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (9)
A Combined Theoretical–Experimental Study of the Interfacial Stability and Conductivity of 4-Aminophenyl and 4-Nitrobenzene Linkers on Au Surfaces
Aryl diazonium electrografting enables robust covalent bonding of organic molecules to metallic and carbon-based substrates. Despite its widespread use, the influence of specific functional groups on the electrode–electrolyte interfacial response remains insufficiently understood. Once grafted, these molecules alter the electronic environment of the substrate, affecting interfacial stability, charge transfer, and interactions with the surrounding medium. On conductive metals, organic layers have often been reported to increase electron transfer resistance, and forming stable monolayers remains challenging due to the high reactivity of N≡N⁺ precursors. Here, we combine quantum chemistry calculations with impedance spectroscopy to investigate the interfacial behavior of 4-aminophenyl and 4-nitrobenzene groups grafted onto Au surfaces. Experimentally, 4-aminophenyl grafting decreases charge transfer resistance, while 4 nitrobenzene increases it. Theoretical analysis supports these observations by revealing differences in charge distribution at the interface, adsorption geometries, and bonding strength, clarifying the relative stability and electronic influence of each linker. Conductance is also evaluated in multiple electrode configurations, including systems where carbon nanotubes are linked to gold substrates. This combined theoretical–experimental approach demonstrates how atomistic analysis could guide the design of improved conductive interfaces and highlights the importance of quantum chemical methods for tailoring molecular anchoring and optimizing nanoscale electronic device performance.
- Open Access
- 2 March 2026
- Published by MDPI AG in Computation
- Vol. 14 (3) , 61
Modeling a High-Efficiency BMS for Light Electromobility and Energy Storage in Critical Environments
Recent advances in energy storage systems and in increasingly efficient, safe, and energy-dense cell chemistries have driven the need for commercial Battery Management System (BMS) architectures with greater control, data acquisition, and communication capabilities, primarily oriented towards customization. This demand introduces a significant change in how electrical systems are modeled and simulated when they integrate active electrochemical elements such as lithium-ion cells. This work presents the development and modeling of a BMS for critical and high-efficiency applications, based on active balancing techniques and incorporating an additional safety stage to respond to failures when charging cells. The electrochemical model was built using an equivalent RLC circuit and RC pairs to represent the Thevenin response of the cell. For the simulation of active balancers, LTspice was employed, while charging and discharging processes and their effects on state of charge (SOC) and state of health (SOH) were complemented through analysis in MATLAB R2024a.The proposed approach offers an efficient tool for evaluating cell dynamics and validating battery management strategies in demanding scenarios. While the current approach prioritizes the individual modeling of electrical conversion systems, our framework presents an innovative multisystem macromodel, where not only is the electrical behavior simulated but also the control, efficiency, and safety of the system are determined, prioritizing reproducibility through SPICE tools.- 2 March 2026
- Published by MDPI AG in Computation
- Vol. 14 (3) , 61
Open AccessModeling a High-Efficiency BMS for Light Electromobility and Energy Storage in Critical Environments
Recent advances in energy storage systems and in increasingly efficient, safe, and energy-dense cell chemistries have driven the need for commercial Battery Management System (BMS) architectures with greater control, data acquisition, and communication capabilities, primarily oriented towards customization. This demand introduces a significant change in how electrical systems are modeled and simulated when they integrate active electrochemical elements such as lithium-ion cells. This work presents the development and modeling of a BMS for critical and high-efficiency applications, based on active balancing techniques and incorporating an additional safety stage to respond to failures when charging cells. The electrochemical model was built using an equivalent RLC circuit and RC pairs to represent the Thevenin response of the cell. For the simulation of active balancers, LTspice was employed, while charging and discharging processes and their effects on state of charge (SOC) and state of health (SOH) were complemented through analysis in MATLAB R2024a.The proposed approach offers an efficient tool for evaluating cell dynamics and validating battery management strategies in demanding scenarios. While the current approach prioritizes the individual modeling of electrical conversion systems, our framework presents an innovative multisystem macromodel, where not only is the electrical behavior simulated but also the control, efficiency, and safety of the system are determined, prioritizing reproducibility through SPICE tools. - Open Access
Electronic Structure and Binding Characteristics of Ionic Liquid Ions on Li-Metal Surfaces Through a DFT Approach
Understanding the interactions between ionic liquid ions and lithium-metal surfaces is critical for designing safer and more efficient lithium metal batteries. In this work, we use density functional theory to investigate the electronic structure, binding energies, work-function shifts and interfacial charge redistribution of several ionic liquid ions, including FSI−, TFSI−, , , DFOB−, Pyr14+, and EMIM+, on a Li-metal anode (Lim). Absorption orientation-dependent effects are examined for each molecule. Specifically, differences in charge density and electron localization function analyses revealed unique patterns of electron accumulation and delocalization that highlighted specific atomic roles in interfacial bonding. Interfacial charge transfer is analyzed through Bader charges, revealing a moderate charge redistribution for the cations (EMIM+, Pyr14+), and a more significant charge uptake for the reactive anions (FSI−, TFSI−, DFOB−). Among cations, EMIM+ was determined to have the most interfacial stability, while Pyr14+ displayed mid-level reactivity. For the anions, varying tendencies for bond formation with lithium metal and potential fragmentation could be determined. Overall, these discoveries detail an atomistic analysis of ionic liquid to Lim interactions providing additional pathways for molecular design techniques to stabilize electrolytes performing not high-cost computational calculations.Open AccessElectronic Structure and Binding Characteristics of Ionic Liquid Ions on Li-Metal Surfaces Through a DFT Approach
Understanding the interactions between ionic liquid ions and lithium-metal surfaces is critical for designing safer and more efficient lithium metal batteries. In this work, we use density functional theory to investigate the electronic structure, binding energies, work-function shifts and interfacial charge redistribution of several ionic liquid ions, including FSI−, TFSI−, , , DFOB−, Pyr14+, and EMIM+, on a Li-metal anode (Lim). Absorption orientation-dependent effects are examined for each molecule. Specifically, differences in charge density and electron localization function analyses revealed unique patterns of electron accumulation and delocalization that highlighted specific atomic roles in interfacial bonding. Interfacial charge transfer is analyzed through Bader charges, revealing a moderate charge redistribution for the cations (EMIM+, Pyr14+), and a more significant charge uptake for the reactive anions (FSI−, TFSI−, DFOB−). Among cations, EMIM+ was determined to have the most interfacial stability, while Pyr14+ displayed mid-level reactivity. For the anions, varying tendencies for bond formation with lithium metal and potential fragmentation could be determined. Overall, these discoveries detail an atomistic analysis of ionic liquid to Lim interactions providing additional pathways for molecular design techniques to stabilize electrolytes performing not high-cost computational calculations. - Open Access
- 28 November 2024
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (1)
The ARTISTIC Battery Manufacturing Digitalization Initiative: From Fundamental Research to Industrialization
Our ARTISTIC project was born in 2018 to improve the efficiency of lithium‐ion battery cell manufacturing process through computational modelling, allowing the research and development of new digital tools to accelerate the optimization of this process. Thanks to the development and use of innovative numerical models, machine learning algorithms and virtual and mixed reality tools, we could significantly advance the understanding of manufacturing/battery cell performance relationships. However, scientific research by itself is not enough to bring innovations into practical applications for society. The creation of spin‐offs or start‐ups can ease the transition from research to application, since it allows scaling up the research outputs into products or services ready‐to‐use by the customers. In this Concept, we discuss the benefits of this transition, we introduce the research findings obtained in the last years within the framework of our ARTISTIC project, and our actions to move from our research to industrial products.
- 28 November 2024
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (1)
Open AccessThe ARTISTIC Battery Manufacturing Digitalization Initiative: From Fundamental Research to Industrialization
Our ARTISTIC project was born in 2018 to improve the efficiency of lithium‐ion battery cell manufacturing process through computational modelling, allowing the research and development of new digital tools to accelerate the optimization of this process. Thanks to the development and use of innovative numerical models, machine learning algorithms and virtual and mixed reality tools, we could significantly advance the understanding of manufacturing/battery cell performance relationships. However, scientific research by itself is not enough to bring innovations into practical applications for society. The creation of spin‐offs or start‐ups can ease the transition from research to application, since it allows scaling up the research outputs into products or services ready‐to‐use by the customers. In this Concept, we discuss the benefits of this transition, we introduce the research findings obtained in the last years within the framework of our ARTISTIC project, and our actions to move from our research to industrial products.
- Open Access
- 5 March 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (15)
Time‐Dependent Deep Learning Manufacturing Process Model for Battery Electrode Microstructure Prediction
The manufacturing process of Lithium‐ion battery electrodes directly affects the practical properties of the cells, such as their performance, durability, and safety. While computational physics‐based modeling has been proven as a very useful method to produce insights on the manufacturing properties interdependencies as well as the formation of electrode microstructures, their high computational costs prevent their direct utilization in electrode optimization loops. In this work, a novel time‐dependent deep learning (DL) model of the battery electrodes manufacturing process is reported, demonstrated for calendering of nickel manganese cobalt (NMC111) electrodes, and trained with time‐series data arising from physics‐based Discrete Element Method (DEM) simulations. The DL model predictions are validated by comparing evaluation metrics (e.g., mean square error (MSE) and R2 score) and electrode functional metrics (contact surface area, porosity, diffusivity, and tortuosity factor), showing very good accuracy with respect to the DEM simulations. The DL model can remarkably capture the elastic recovery of the electrode upon compression (spring‐back phenomenon) and the main 3D electrode microstructure features without using the functional descriptors for its training. Furthermore, the DL model has a significantly lower computational cost than the DEM simulations, paving the way toward quasi‐real‐time optimization loops of the 3D electrode architecture predicting the calendering conditions to adopt in order to obtain the desired electrode performance.
- 5 March 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (15)
Open AccessTime‐Dependent Deep Learning Manufacturing Process Model for Battery Electrode Microstructure Prediction
The manufacturing process of Lithium‐ion battery electrodes directly affects the practical properties of the cells, such as their performance, durability, and safety. While computational physics‐based modeling has been proven as a very useful method to produce insights on the manufacturing properties interdependencies as well as the formation of electrode microstructures, their high computational costs prevent their direct utilization in electrode optimization loops. In this work, a novel time‐dependent deep learning (DL) model of the battery electrodes manufacturing process is reported, demonstrated for calendering of nickel manganese cobalt (NMC111) electrodes, and trained with time‐series data arising from physics‐based Discrete Element Method (DEM) simulations. The DL model predictions are validated by comparing evaluation metrics (e.g., mean square error (MSE) and R2 score) and electrode functional metrics (contact surface area, porosity, diffusivity, and tortuosity factor), showing very good accuracy with respect to the DEM simulations. The DL model can remarkably capture the elastic recovery of the electrode upon compression (spring‐back phenomenon) and the main 3D electrode microstructure features without using the functional descriptors for its training. Furthermore, the DL model has a significantly lower computational cost than the DEM simulations, paving the way toward quasi‐real‐time optimization loops of the 3D electrode architecture predicting the calendering conditions to adopt in order to obtain the desired electrode performance.
- 1 March 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (3) , 030502
Li-Metal Anode in a Conventional Li-Ion Battery Electrolyte: Solid Electrolyte Interphase Formation using Ab Initio Molecular Dynamics
Ab initio molecular dynamics simulations were performed for Li + conducting electrolytes based on 1M lithium hexafluorophosphate (Li + PF 6 − ) in ethylene carbonate (EC)-ethylmethyl carbonate (EMC) (3:7wt) with 5 wt% vinylene carbonate (VC) in contact with Li-metal (electrode), finding a variety of products due to dissociations of all electrolyte components. The formed solid electrolyte interphase from electrolyte degradation arranges in an outer layer composed of denser materials (sitting over the anode surface) such as Li 2 (CH 2 O) 2 from EC, Li 2 CO 3 , Li 2 C 2 H 2 and Li 2 CO 2 from VC, and Li 2 C 3 H 5 O 2 and LiCH 3 O from EMC dissociations. Then follows an inner layer made of Li-binary compounds, Li 3 CO, Li 2 O and Li 3 C from EC, Li 2 O, Li 2 C 2 and LiH from VC, and LiF and Li 3 P from PF 6 − dissociations. We calculated electron affinities of electrolyte molecules during their decomposition using a polarizable continuum model to consider solvent effects molecules degradation. PF 6 − has the highest first and second electron affinities, despite explicit Coulomb repulsion, which eventually dissociates the molecule right after capturing an electron from the metal-anode; therefore, PF 6 − is also the fastest to dissociate. EMC has the lowest first and second electron affinities, thus it is the least prone to accept electrons and the least likely to dissociate at the Li-metal interface.
- 1 March 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (3) , 030502
Li-Metal Anode in a Conventional Li-Ion Battery Electrolyte: Solid Electrolyte Interphase Formation using Ab Initio Molecular Dynamics
Ab initio molecular dynamics simulations were performed for Li + conducting electrolytes based on 1M lithium hexafluorophosphate (Li + PF 6 − ) in ethylene carbonate (EC)-ethylmethyl carbonate (EMC) (3:7wt) with 5 wt% vinylene carbonate (VC) in contact with Li-metal (electrode), finding a variety of products due to dissociations of all electrolyte components. The formed solid electrolyte interphase from electrolyte degradation arranges in an outer layer composed of denser materials (sitting over the anode surface) such as Li 2 (CH 2 O) 2 from EC, Li 2 CO 3 , Li 2 C 2 H 2 and Li 2 CO 2 from VC, and Li 2 C 3 H 5 O 2 and LiCH 3 O from EMC dissociations. Then follows an inner layer made of Li-binary compounds, Li 3 CO, Li 2 O and Li 3 C from EC, Li 2 O, Li 2 C 2 and LiH from VC, and LiF and Li 3 P from PF 6 − dissociations. We calculated electron affinities of electrolyte molecules during their decomposition using a polarizable continuum model to consider solvent effects molecules degradation. PF 6 − has the highest first and second electron affinities, despite explicit Coulomb repulsion, which eventually dissociates the molecule right after capturing an electron from the metal-anode; therefore, PF 6 − is also the fastest to dissociate. EMC has the lowest first and second electron affinities, thus it is the least prone to accept electrons and the least likely to dissociate at the Li-metal interface.