Cristina Mancarella
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cristina Mancarella has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Andrea Li Bassi
Politecnico di Milano
6 shared publications - Luca Mascaretti
Czech Advanced Technology and Research Institute Regional Centre of Advanced Technologies and Materials Palacký University Olomouc Olomouc Czech Republic
4 shared publications - Beatrice Roberta Bricchi
Dipartimento di Energia, Laboratorio Materiali Micro e Nanostrutturati, Politecnico di Milano, via Ponzio 34/3, I-20133 Milano, Italy
3 shared publications - Alberto Naldoni
Department of Chemistry and NIS Centre, University of Turin, Turin, Italy
2 shared publications - Margherita Zavelani Rossi
Politecnico di Milano
2 shared publications - Maria Sygletou
OPTMATLAB Dipartimento di Fisica, Università di Genova, Via Dodecaneso 33, 16146 Genova, Italy
2 shared publications
Latest Publications
- Open Access
- 30 April 2026
- Published by Elsevier in Acta Materialia
- Vol. 313
Defect complexes and charge compensation in Ta-doped anatase TiO2 transparent conductor
- 30 April 2026
- Published by Elsevier in Acta Materialia
- Vol. 313
Open AccessDefect complexes and charge compensation in Ta-doped anatase TiO2 transparent conductor
- Open Access
- 31 March 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (15)
Spectral Selectivity Enhancement in Solar Absorber Multilayers through Titanium Oxynitride Thin Film Modulation
Broadband photothermal materials with spectral selectivity and stability in harsh environments are crucial for high‐temperature solar‐thermal systems. Additionally, achieving broadband absorption without relying on metamaterials remains a challenge. Refractory titanium nitride (TiN) and oxynitride (TiON), with their high infrared (IR) reflectance and tunable optical/plasmonic properties, are promising candidates for such applications. However, their susceptibility to oxidation complicates synthesis. Here, a straightforward approach is demonstrated to synthesize and tune the optical/plasmonic properties of TiN/TiON thin films by simply controlling the oxygen pressure during room‐temperature pulsed laser deposition. Specifically, it is shown that highly metallic Ti(O)N films, as well as TiON films exhibiting double‐epsilon‐near‐zero (D‐ENZ) behavior in the optical region, can be obtained. This tunability enabled the design and fabrication of a nitride‐based multilayer with optimized solar‐selective absorption. In particular, a highly metallic TiN film was employed as the bottom layer, while a TiON ultrathin film exhibiting D‐ENZ behavior was used as the absorbing layer. The resulting device achieved 91% solar absorption, 80% mid‐IR reflectance, and maintained broadband absorption at incident angles up to 70°. These findings establish a lithography‐free, thermally untreated route to broadband, spectrally selective absorbers, based on tunable Ti(O)N films, opening new opportunities for next‐generation high‐temperature energy harvesting applications.
- 31 March 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (15)
Open AccessSpectral Selectivity Enhancement in Solar Absorber Multilayers through Titanium Oxynitride Thin Film Modulation
Broadband photothermal materials with spectral selectivity and stability in harsh environments are crucial for high‐temperature solar‐thermal systems. Additionally, achieving broadband absorption without relying on metamaterials remains a challenge. Refractory titanium nitride (TiN) and oxynitride (TiON), with their high infrared (IR) reflectance and tunable optical/plasmonic properties, are promising candidates for such applications. However, their susceptibility to oxidation complicates synthesis. Here, a straightforward approach is demonstrated to synthesize and tune the optical/plasmonic properties of TiN/TiON thin films by simply controlling the oxygen pressure during room‐temperature pulsed laser deposition. Specifically, it is shown that highly metallic Ti(O)N films, as well as TiON films exhibiting double‐epsilon‐near‐zero (D‐ENZ) behavior in the optical region, can be obtained. This tunability enabled the design and fabrication of a nitride‐based multilayer with optimized solar‐selective absorption. In particular, a highly metallic TiN film was employed as the bottom layer, while a TiON ultrathin film exhibiting D‐ENZ behavior was used as the absorbing layer. The resulting device achieved 91% solar absorption, 80% mid‐IR reflectance, and maintained broadband absorption at incident angles up to 70°. These findings establish a lithography‐free, thermally untreated route to broadband, spectrally selective absorbers, based on tunable Ti(O)N films, opening new opportunities for next‐generation high‐temperature energy harvesting applications.
- Open Access
- 17 September 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (30)
Real‐Time Detection of Coherent Vibrational Dynamics in TiN Films
Titanium nitride (TiN) has recently gained considerable interest because of its remarkable plasmonic properties and for its strong electron–phonon (e–ph) coupling, leading to extremely fast (<100 fs) electron‐lattice cooling. Here, the generation of coherent phonons in TiN films is reported, along with their real‐time detection by means of broadband transient reflection spectroscopy with sub‐15‐fs temporal resolution. The measurements show damped oscillations, superimposed to excited state electronic decay. A coherent vibrational mode is revealed, with ≈10 THz frequency ascribed to defect‐activated normal modes, consistent with spontaneous Raman scattering data, and a dephasing time of ≈250 fs. Two π‐phase flips are also observed located at photon energies corresponding to interband optical transitions (at 3.2 and 2.5 eV), ascribed to selective coupling of the vibrational mode to these transitions; the energy modulation induced by the vibrational coherence is evaluated. It is shown that the displacive excitation of coherent phonons model describes the coherent response in terms of temporal behavior and of spectral amplitude profile. Overall, a comprehensive and detailed analysis of coherent phonons in TiN films, so far undected, is provided and relevant information on TiN photo‐physical properties, potentially useful for its applications, is given.
- 17 September 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (30)
Open AccessReal‐Time Detection of Coherent Vibrational Dynamics in TiN Films
Titanium nitride (TiN) has recently gained considerable interest because of its remarkable plasmonic properties and for its strong electron–phonon (e–ph) coupling, leading to extremely fast (<100 fs) electron‐lattice cooling. Here, the generation of coherent phonons in TiN films is reported, along with their real‐time detection by means of broadband transient reflection spectroscopy with sub‐15‐fs temporal resolution. The measurements show damped oscillations, superimposed to excited state electronic decay. A coherent vibrational mode is revealed, with ≈10 THz frequency ascribed to defect‐activated normal modes, consistent with spontaneous Raman scattering data, and a dephasing time of ≈250 fs. Two π‐phase flips are also observed located at photon energies corresponding to interband optical transitions (at 3.2 and 2.5 eV), ascribed to selective coupling of the vibrational mode to these transitions; the energy modulation induced by the vibrational coherence is evaluated. It is shown that the displacive excitation of coherent phonons model describes the coherent response in terms of temporal behavior and of spectral amplitude profile. Overall, a comprehensive and detailed analysis of coherent phonons in TiN films, so far undected, is provided and relevant information on TiN photo‐physical properties, potentially useful for its applications, is given.
- Open Access
- 11 October 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (50) , 502003
Plasmonic titanium nitride nanomaterials prepared by physical vapor deposition methods
Titanium nitride (TiN) has recently emerged as an alternative to coinage metals to enable the development of integrated plasmonic devices at visible and medium-infrared wavelengths. In this regard, its optical performance can be conveniently tuned by tailoring the process parameters of physical vapor deposition methods, such as magnetron sputtering and pulsed laser deposition (PLD). This review first introduces the fundamental features of TiN and a description on its optical properties, including insights on the main experimental techniques to measure them. Afterwards, magnetron sputtering and PLD are selected as fabrication techniques for TiN nanomaterials. The fundamental mechanistic aspects of both techniques are discussed in parallel with selected case studies from the recent literature, which elucidate the critical advantages of such techniques to engineer the nanostructure and the plasmonic performance of TiN.
- 11 October 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (50) , 502003
Open AccessPlasmonic titanium nitride nanomaterials prepared by physical vapor deposition methods
Titanium nitride (TiN) has recently emerged as an alternative to coinage metals to enable the development of integrated plasmonic devices at visible and medium-infrared wavelengths. In this regard, its optical performance can be conveniently tuned by tailoring the process parameters of physical vapor deposition methods, such as magnetron sputtering and pulsed laser deposition (PLD). This review first introduces the fundamental features of TiN and a description on its optical properties, including insights on the main experimental techniques to measure them. Afterwards, magnetron sputtering and PLD are selected as fabrication techniques for TiN nanomaterials. The fundamental mechanistic aspects of both techniques are discussed in parallel with selected case studies from the recent literature, which elucidate the critical advantages of such techniques to engineer the nanostructure and the plasmonic performance of TiN.
- Open Access
- 5 May 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (15)
Unfolding the Origin of the Ultrafast Optical Response of Titanium Nitride
Ultrafast plasmonics is driving growing interest for the search of novel plasmonic materials, overcoming the main limitations of noble metals. In this framework, titanium nitride (TiN) is brought in the spotlight for its refractory properties combined with an extremely fast electron‐lattice cooling time (<100 fs) compared to gold (≈ 1 ps). Despite the results reported in literature, a clear‐cut explanation of the origin of the ultrafast and giant optical response of TiN‐based materials upon excitation with femtosecond laser pulses is still missing. To address this issue, an original model is introduced, capable of unfolding the modulation of TiN optical properties on a broad bandwidth, starting from the variations of electronic and lattice temperatures following ultrafast photoexcitation. The numerical analysis is validated on ultrafast pump–probe spectroscopy experiments on a simple structure, a TiN film on glass. This approach enables a complete disentanglement of the interband and intraband contributions to the permittivity modulation. Moreover, it is also shown that, varying the synthesis conditions of the TiN film, not only the static, but also the dynamical optical response can be efficiently tuned. These findings pave the way for a breakthrough in the field: the design of TiN‐based ultrafast nanodevices for all‐optical modulation of light.
- 5 May 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (15)
Open AccessUnfolding the Origin of the Ultrafast Optical Response of Titanium Nitride
Ultrafast plasmonics is driving growing interest for the search of novel plasmonic materials, overcoming the main limitations of noble metals. In this framework, titanium nitride (TiN) is brought in the spotlight for its refractory properties combined with an extremely fast electron‐lattice cooling time (<100 fs) compared to gold (≈ 1 ps). Despite the results reported in literature, a clear‐cut explanation of the origin of the ultrafast and giant optical response of TiN‐based materials upon excitation with femtosecond laser pulses is still missing. To address this issue, an original model is introduced, capable of unfolding the modulation of TiN optical properties on a broad bandwidth, starting from the variations of electronic and lattice temperatures following ultrafast photoexcitation. The numerical analysis is validated on ultrafast pump–probe spectroscopy experiments on a simple structure, a TiN film on glass. This approach enables a complete disentanglement of the interband and intraband contributions to the permittivity modulation. Moreover, it is also shown that, varying the synthesis conditions of the TiN film, not only the static, but also the dynamical optical response can be efficiently tuned. These findings pave the way for a breakthrough in the field: the design of TiN‐based ultrafast nanodevices for all‐optical modulation of light.
- 11 February 2022
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 6 (2) , 025201
Tunable optical and plasmonic response of Au nanoparticles embedded in Ta-doped transparent conducting filmsLocalized surface plasmon resonances (LSPRs) are fascinating optical phenomena occurring in metal nanostructures, like gold nanoparticles (NPs). Plasmonic excitation can be tailored efficiently in the visible range by acting on size, shape, and NP surroundings, whereas carrier density is fixed, thus restricting the LSPR modulation. Transparent conductive oxides (TCOs), on the other hand, are gaining increasing interest for their transparency, charge carrier tunability, and plasmonic features in the infrared. The combination of these two materials into a metal-TCO nanocomposite can give access to unique electrical and optical characteristics, to be tailored in view of the desired optoelectronic application. In this paper, Au NPs and Ta-doped TCO films have been merged with the aim to master the Au plasmon resonance by acting on the dielectric properties of the surrounding TCO. Morphology, structure, and electrical properties have been investigated as well to understand the optical response of the nanosystems. The role of the embedding geometry has been explored, revealing that the largest LSPR shift (550–760 nm) occurs when the NPs are sandwiched in the middle of the film and not at the bottom of the film (substrate-film interface). Ta doping in the TCO has been varied (5–10% at. and bare ) to induce a permittivity change of the matrix. As a result, Au LSPR is clearly blueshifted when decreasing the dielectric permittivity at higher Ta content in the sandwich configuration. Despite the nonoptimal electrical performance caused by defectivity of the films, Au- multifunctional nanocomposites are promising candidates for their optical behavior as highly tunable plasmonic conductive metamaterials for advanced light management.- 11 February 2022
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 6 (2) , 025201
Tunable optical and plasmonic response of Au nanoparticles embedded in Ta-doped transparent conducting filmsLocalized surface plasmon resonances (LSPRs) are fascinating optical phenomena occurring in metal nanostructures, like gold nanoparticles (NPs). Plasmonic excitation can be tailored efficiently in the visible range by acting on size, shape, and NP surroundings, whereas carrier density is fixed, thus restricting the LSPR modulation. Transparent conductive oxides (TCOs), on the other hand, are gaining increasing interest for their transparency, charge carrier tunability, and plasmonic features in the infrared. The combination of these two materials into a metal-TCO nanocomposite can give access to unique electrical and optical characteristics, to be tailored in view of the desired optoelectronic application. In this paper, Au NPs and Ta-doped TCO films have been merged with the aim to master the Au plasmon resonance by acting on the dielectric properties of the surrounding TCO. Morphology, structure, and electrical properties have been investigated as well to understand the optical response of the nanosystems. The role of the embedding geometry has been explored, revealing that the largest LSPR shift (550–760 nm) occurs when the NPs are sandwiched in the middle of the film and not at the bottom of the film (substrate-film interface). Ta doping in the TCO has been varied (5–10% at. and bare ) to induce a permittivity change of the matrix. As a result, Au LSPR is clearly blueshifted when decreasing the dielectric permittivity at higher Ta content in the sandwich configuration. Despite the nonoptimal electrical performance caused by defectivity of the films, Au- multifunctional nanocomposites are promising candidates for their optical behavior as highly tunable plasmonic conductive metamaterials for advanced light management.- Open Access
- 7 September 2021
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 2 (21) , 7064-7076
Optical and electronic properties of transparent conducting Ta:TiO2 thin and ultra-thin films: the effect of doping and thickness
The evolution of optical and electronic properties of Ta-doped TiO2 films is investigated as thickness is decreased to 5 nm and as a function of Ta doping. The correlation with structural properties is discussed, showing a high degree of tunability.
- 7 September 2021
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 2 (21) , 7064-7076
Open AccessOptical and electronic properties of transparent conducting Ta:TiO2 thin and ultra-thin films: the effect of doping and thickness
The evolution of optical and electronic properties of Ta-doped TiO2 films is investigated as thickness is decreased to 5 nm and as a function of Ta doping. The correlation with structural properties is discussed, showing a high degree of tunability.