Yifan Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yifan Chen has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Bo Li
Hainan Provincial Key Laboratory of Fine Chemicals, College of Chemical Engineering and Technology, Hainan University, Haikou 570228, China
3 shared publications - Xin Zhong
Hainan Provincial Key Laboratory of Fine Chemicals, College of Chemical Engineering and Technology, Hainan University, Haikou 570228, China
3 shared publications - Yujie Song
School of Chemistry and Chemical Engineering Hainan University Haikou China
3 shared publications Ayman Nafady
Department of Chemistry College of Science King Saud University Riyadh 11451 Saudi Arabia
2 shared publicationsCheng‐Xia Chen
Department of Chemistry University of North Texas 1508 W Mulberry St Denton TX 76201 USA
2 shared publications- Derui Kong
Hainan Provincial Key Laboratory of Fine Chemicals, College of Chemical Engineering and Technology, Hainan University, Haikou 570228, China
2 shared publications
Latest Publications
- Open Access
- 19 March 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (6) , 372
Photocatalytic Phenylmethylamine Coupling Reaction of Organic–Inorganic Composites Based on Benzothiophene Polymers and TiO2
Benzothiophene polymers, as a class of novel organic semiconductor materials, exhibit significant potential in the field of photocatalysis due to their broad light-responsive range and tunable energy level structures. In this study, a benzothiophene-based polymer organic semiconductor (denoted as P42) was integrated with titanium dioxide (TiO2) via a simple sol–gel method, yielding an organic–inorganic hybrid material. This composite facilitates the modulation of energy level potentials and promotes the effective separation of photogenerated charges, thereby demonstrating remarkable synergistic catalytic performance in the photocatalytic oxidative coupling of benzylamines. By optimizing the ratio of organic to inorganic components and various photocatalytic reaction conditions, the hybrid material 1.7%P42-TiO2, containing 1.7 wt% of the dithiophene polymer without any metal cocatalysts, exhibited outstanding performance under an air atmosphere and visible light irradiation after 12 h. It achieved a yield of over 88.7% and a selectivity exceeding 89.8% in the synthesis of N-benzoylaniline, significantly surpassing the performance of pure TiO2 (52.9% yield, 54.9% selectivity) and P42 (54.4% yield, 54.9% selectivity). Structural and photophysical characterizations, including UV–Vis DRS, XRD, SEM, TEM, and EPR, reveal that the enhanced photocatalytic activity originates from broad visible-light absorption, improved charge separation, and well-matched energy levels. Mechanistic investigations suggest a synergistic pathway involving photoinduced hole oxidation and radical-mediated coupling. This work provides valuable insights and a reference for the solar-driven photocatalytic synthesis of nitrogen-containing platform molecules under mild conditions.
- 19 March 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (6) , 372
Open AccessPhotocatalytic Phenylmethylamine Coupling Reaction of Organic–Inorganic Composites Based on Benzothiophene Polymers and TiO2
Benzothiophene polymers, as a class of novel organic semiconductor materials, exhibit significant potential in the field of photocatalysis due to their broad light-responsive range and tunable energy level structures. In this study, a benzothiophene-based polymer organic semiconductor (denoted as P42) was integrated with titanium dioxide (TiO2) via a simple sol–gel method, yielding an organic–inorganic hybrid material. This composite facilitates the modulation of energy level potentials and promotes the effective separation of photogenerated charges, thereby demonstrating remarkable synergistic catalytic performance in the photocatalytic oxidative coupling of benzylamines. By optimizing the ratio of organic to inorganic components and various photocatalytic reaction conditions, the hybrid material 1.7%P42-TiO2, containing 1.7 wt% of the dithiophene polymer without any metal cocatalysts, exhibited outstanding performance under an air atmosphere and visible light irradiation after 12 h. It achieved a yield of over 88.7% and a selectivity exceeding 89.8% in the synthesis of N-benzoylaniline, significantly surpassing the performance of pure TiO2 (52.9% yield, 54.9% selectivity) and P42 (54.4% yield, 54.9% selectivity). Structural and photophysical characterizations, including UV–Vis DRS, XRD, SEM, TEM, and EPR, reveal that the enhanced photocatalytic activity originates from broad visible-light absorption, improved charge separation, and well-matched energy levels. Mechanistic investigations suggest a synergistic pathway involving photoinduced hole oxidation and radical-mediated coupling. This work provides valuable insights and a reference for the solar-driven photocatalytic synthesis of nitrogen-containing platform molecules under mild conditions.
- Open Access
- 5 July 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (13) , 11106
The Facile Synthesis of a Re-Complex Heterogeneous Catalysis System for Enhancing CO2 Photoreduction Activity
fac-Re(2,2’-bipyridine)(CO)3Cl] (denoted as ReCC) is an efficient molecule-catalyst with high selectivity in the photoreduction of CO2 to CO in a homogeneous system. However, the two major drawbacks of Re(I) complexes in the homogeneous system, easy degradation and difficult separation, seriously hinder its development in the field of industrial applications. In this paper, we designed and prepared two different Re-complex fixation systems (denoted as ReCC@TiO2-5 wt% and ReCC-TiO2-5 wt%) based on TiO2 gel via the sensitization method and sol–gel method, respectively. Compared with a pure ReCC complex, both of them exhibited excellent photocatalytic reduction activity. In particular, the sol–gel hybrid system (ReCC-TiO2-5 wt%) displayed outstanding positive synergistic effects on the photocatalytic activity and the long durability of the photocatalytic process. A series of characterizations were carried out to explore the probable photocatalytic reduction process mechanism, which provides the theoretical basis and technical support for the Re complex fixation method.
- 5 July 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (13) , 11106
Open AccessThe Facile Synthesis of a Re-Complex Heterogeneous Catalysis System for Enhancing CO2 Photoreduction Activity
fac-Re(2,2’-bipyridine)(CO)3Cl] (denoted as ReCC) is an efficient molecule-catalyst with high selectivity in the photoreduction of CO2 to CO in a homogeneous system. However, the two major drawbacks of Re(I) complexes in the homogeneous system, easy degradation and difficult separation, seriously hinder its development in the field of industrial applications. In this paper, we designed and prepared two different Re-complex fixation systems (denoted as ReCC@TiO2-5 wt% and ReCC-TiO2-5 wt%) based on TiO2 gel via the sensitization method and sol–gel method, respectively. Compared with a pure ReCC complex, both of them exhibited excellent photocatalytic reduction activity. In particular, the sol–gel hybrid system (ReCC-TiO2-5 wt%) displayed outstanding positive synergistic effects on the photocatalytic activity and the long durability of the photocatalytic process. A series of characterizations were carried out to explore the probable photocatalytic reduction process mechanism, which provides the theoretical basis and technical support for the Re complex fixation method.
- Open Access
Enhanced Photocatalytic Coupling of Benzylamine to N-Benzylidene Benzylamine over the Organic–Inorganic Composites F70-TiO2 Based on Fullerenes Derivatives and TiO2
The organic–inorganic composites F70-TiO2, based on fullerene with carboxyl group derivatives and TiO2 semiconductor, have been designed and constructed to become an optical-functional photocatalyst via the facile sol–gel method. The composite photocatalyst obtained shows excellent photocatalytic activity for the high-efficiency conversion of benzylamine (BA) to N-benzylidene benzylamine (NBBA) with air pressure at a normal temperature under visible light irradiation. By optimizing the composition, the composites with the 1:15 mass ratio of F70 and TiO2, denoted as F70-TiO2(1:15), demonstrated the highest reaction efficiency for benzylamine (>98% conversion) to N-benzylidene benzylamine (>93% selectivity) in this study. However, pure TiO2 and fullerene derivatives (F70) exhibit decreased conversion (56.3% and 89.7%, respectively) and selectivity (83.8% and 86.0%, respectively). The UV–vis diffuse reflectance spectra (DRS) and Mott–Schottky experiment’s results indicate that the introduction of fullerene derivatives into anatase TiO2 would greatly broaden the visible light response range and adjust the energy band positions of the composites, enhancing the sunlight utilization and promoting the photogenerated charge (e−-h+) separation and transfer. Specifically, a series of results on the in situ EPR tests and the photo-electrophysical experiment indicate that the separated charges from the hybrid could effectively activate benzylamine and O2 to accelerate the formation of active intermediates, and then couple with free BA molecules to form the desired production of N-BBA. The effective combination, on a molecular scale, between fullerene and titanium dioxide has provided a profound understanding of the photocatalysis mechanism. This work elaborates and makes clear the relationship between the structure and the performance of functional photocatalysts.
Open AccessEnhanced Photocatalytic Coupling of Benzylamine to N-Benzylidene Benzylamine over the Organic–Inorganic Composites F70-TiO2 Based on Fullerenes Derivatives and TiO2
The organic–inorganic composites F70-TiO2, based on fullerene with carboxyl group derivatives and TiO2 semiconductor, have been designed and constructed to become an optical-functional photocatalyst via the facile sol–gel method. The composite photocatalyst obtained shows excellent photocatalytic activity for the high-efficiency conversion of benzylamine (BA) to N-benzylidene benzylamine (NBBA) with air pressure at a normal temperature under visible light irradiation. By optimizing the composition, the composites with the 1:15 mass ratio of F70 and TiO2, denoted as F70-TiO2(1:15), demonstrated the highest reaction efficiency for benzylamine (>98% conversion) to N-benzylidene benzylamine (>93% selectivity) in this study. However, pure TiO2 and fullerene derivatives (F70) exhibit decreased conversion (56.3% and 89.7%, respectively) and selectivity (83.8% and 86.0%, respectively). The UV–vis diffuse reflectance spectra (DRS) and Mott–Schottky experiment’s results indicate that the introduction of fullerene derivatives into anatase TiO2 would greatly broaden the visible light response range and adjust the energy band positions of the composites, enhancing the sunlight utilization and promoting the photogenerated charge (e−-h+) separation and transfer. Specifically, a series of results on the in situ EPR tests and the photo-electrophysical experiment indicate that the separated charges from the hybrid could effectively activate benzylamine and O2 to accelerate the formation of active intermediates, and then couple with free BA molecules to form the desired production of N-BBA. The effective combination, on a molecular scale, between fullerene and titanium dioxide has provided a profound understanding of the photocatalysis mechanism. This work elaborates and makes clear the relationship between the structure and the performance of functional photocatalysts.
- Open Access
- 3 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (11) , 1918
Enhanced Photocatalytic Hydrogen Production Activity by Constructing a Robust Organic-Inorganic Hybrid Material Based Fulvalene and TiO2
A novel redox-active organic-inorganic hybrid material (denoted as H4TTFTB-TiO2) based on tetrathiafulvalene derivatives and titanium dioxide with a micro/mesoporous nanomaterial structure has been synthesized via a facile sol-gel method. In this study, tetrathiafulvalene-3,4,5,6-tetrakis(4-benzoic acid) (H4TTFTB) is an ideal electron-rich organic material and has been introduced into TiO2 for promoting photocatalytic H2 production under visible light irradiation. Notably, the optimized composites demonstrate remarkably enhanced photocatalytic H2 evolution performance with a maximum H2 evolution rate of 1452 μmol g−1 h−1, which is much higher than the prototypical counterparts, the common dye-sensitized sample (denoted as H4TTFTB-5.0/TiO2) (390.8 μmol g−1 h−1) and pure TiO2 (18.87 μmol g−1 h−1). Moreover, the composites perform with excellent stability even after being used for seven time cycles. A series of characterizations of the morphological structure, the photoelectric physics performance and the photocatalytic activity of the hybrid reveal that the donor-acceptor structural H4TTFTB and TiO2 have been combined robustly by covalent titanium ester during the synthesis process, which improves the stability of the hybrid nanomaterials, extends visible-light adsorption range and stimulates the separation of photogenerated charges. This work provides new insight for regulating precisely the structure of the fulvalene-based composite at the molecule level and enhances our in-depth fundamental understanding of the photocatalytic mechanism.
- 3 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (11) , 1918
Open AccessEnhanced Photocatalytic Hydrogen Production Activity by Constructing a Robust Organic-Inorganic Hybrid Material Based Fulvalene and TiO2
A novel redox-active organic-inorganic hybrid material (denoted as H4TTFTB-TiO2) based on tetrathiafulvalene derivatives and titanium dioxide with a micro/mesoporous nanomaterial structure has been synthesized via a facile sol-gel method. In this study, tetrathiafulvalene-3,4,5,6-tetrakis(4-benzoic acid) (H4TTFTB) is an ideal electron-rich organic material and has been introduced into TiO2 for promoting photocatalytic H2 production under visible light irradiation. Notably, the optimized composites demonstrate remarkably enhanced photocatalytic H2 evolution performance with a maximum H2 evolution rate of 1452 μmol g−1 h−1, which is much higher than the prototypical counterparts, the common dye-sensitized sample (denoted as H4TTFTB-5.0/TiO2) (390.8 μmol g−1 h−1) and pure TiO2 (18.87 μmol g−1 h−1). Moreover, the composites perform with excellent stability even after being used for seven time cycles. A series of characterizations of the morphological structure, the photoelectric physics performance and the photocatalytic activity of the hybrid reveal that the donor-acceptor structural H4TTFTB and TiO2 have been combined robustly by covalent titanium ester during the synthesis process, which improves the stability of the hybrid nanomaterials, extends visible-light adsorption range and stimulates the separation of photogenerated charges. This work provides new insight for regulating precisely the structure of the fulvalene-based composite at the molecule level and enhances our in-depth fundamental understanding of the photocatalytic mechanism.
- Open Access
- 18 December 2021
- Published by Wiley in Angewandte Chemie
- Vol. 134 (3)
Innenrücktitelbild: Enhancing Photocatalytic Hydrogen Production via the Construction of Robust Multivariate Ti‐MOF/COF Composites (Angew. Chem. 3/2022)
- 18 December 2021
- Published by Wiley in Angewandte Chemie
- Vol. 134 (3)
Open AccessInnenrücktitelbild: Enhancing Photocatalytic Hydrogen Production via the Construction of Robust Multivariate Ti‐MOF/COF Composites (Angew. Chem. 3/2022)
- Open Access
- 17 December 2021
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (3)
Inside Back Cover: Enhancing Photocatalytic Hydrogen Production via the Construction of Robust Multivariate Ti‐MOF/COF Composites (Angew. Chem. Int. Ed. 3/2022)
- 17 December 2021
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (3)
Open AccessInside Back Cover: Enhancing Photocatalytic Hydrogen Production via the Construction of Robust Multivariate Ti‐MOF/COF Composites (Angew. Chem. Int. Ed. 3/2022)