JBJake Bromage

Jake Bromage

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jake Bromage has a total of 91 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Controlling supercontinuum generation with tandem neural network–based models

    by Robert Holcomb, Chengyong Feng, Jake Bromage

    White light continuum (WLC) generation in nonlinear media is governed by strongly nonlinear and coupled physical processes, making the selection of experimental parameters to achieve a desired output challenging. In our experiments, we generate WLC in an undoped YAG crystal using tunable subpicosecond, 1-µm laser pulses. We demonstrate a tandem neural network framework as an inverse model for WLC generation and find that the model successfully converges to reproduce desired outputs, despite nonunique experimental parameters. We further used the model to study the range over which we can optimize the system. These results highlight both the utility and limitations of neural-network–based inverse design for nonlinear optical systems and provide physical insight into WLC generation.

  • Generation of stable, reflective plasma gratings from structured solid surfaces

    by Cheonha Jeon, Michael Spilatro, Benjamin Webb, Seung-Whan Bahk, Jake Bromage

    Plasma optics enable manipulation of ultra-intense laser pulses beyond the damage limits of conventional solid-state components. In high-power laser systems, diffraction grating damage thresholds constrain achievable energy, often requiring increased beam size in pulse compressors. While plasma gratings offer a promising alternative, existing implementations are limited by low operational fluence and poor stability. Here, we demonstrate a simple plasma grating generated from ionizing the surface of a solid grating. The plasma grating accurately replicates the geometry of the underlying solid grating and is capable of handling input fluences up to 15 J/cm 2 , achieving an operational efficiency of 36% with less than 0.3% standard deviation.

  • Nonlinear regenerative amplification using tunable intracavity cascaded quadratic nonlinearities

    by Chengyong Feng, Robert Holcomb, Christophe Dorrer, Jake Bromage

    Conventional nonlinear regenerative amplification utilizes Kerr (i.e., self-focusing) nonlinearity to broaden the spectrum via self-phase modulation during the direct amplification of ultrashort pulses, which helps overcome spectral gain narrowing for high-energy, ultrashort-pulse generation. We introduce cascaded quadratic nonlinearities from a type-I second-harmonic generation crystal, which can be tuned in both magnitude and sign via the phase-mismatching condition, inside a regenerative amplifier to enable nonlinearity-tunable regenerative amplification. We demonstrate, both experimentally and numerically, a nonlinear Yb:YAG thin-disk regenerative amplifier with either positive or negative net nonlinearity that delivers 1-kHz, >0.4-mJ pulses as short as ∼200 fs and high-quality beams free of self-focusing. The laser’s average power can be scaled to >100 W when seeded and operated at a much higher repetition rate to benefit various applications.

  • Nonlinear post-compression to sub-20 fs using a single-stage multipass cell filled with ambient air

    by Chengyong Feng, Jake Bromage

    Noble gas-filled multipass cells have proven to be very effective in compressing high-energy, hundreds-of-femtoseconds pulses down to tens of femtoseconds. Molecular gases can be an attractive alternative to noble gases since they provide additional Raman nonlinearities that can be much stronger than the electronic Kerr nonlinearity and can therefore enable more spectral broadening and shorter compressed pulses. Air at atmospheric pressure offers molecular gases in their simplest format, with both easy access and no costs for implementing a gas chamber. Here we demonstrate a single-stage, air-filled multipass cell that spectrally broadens 145- μ J, 185-fs pulses with >90% throughput, with a small fraction of the output compressed to sub-20 fs using a prism-pair compressor. The multipass cell uses standard broadband mirrors without dispersion engineering and ambient air as the nonlinear medium, making it the simplest and most cost-effective solution for generating few-cycle femtosecond pulses.


  • High-temporal-contrast stretcher design based on an asymmetric Offner triplet

    by Seung-Whan Bahk, Benjamin Webb, Maeve Bozarth, Mark Meyers, Jake Bromage

    A new stretcher design based on an asymmetric Offner triplet is proposed for better pulse contrast performance while maintaining excellent imaging performance of the conventional Offner stretcher. The contrast degradation due to the intermediate focusing on the secondary mirror in a symmetric Offner stretcher is avoided in the asymmetric Offner, where the intermediate focus is shifted away from the secondary mirror surface. The effect of beam propagation on contrast is analyzed with respect to the location of the phase screen that introduces spatiospectral coupling, as well as the location of the detection plane. It is found that a larger optical distance from the phase screen to the detection plane improves the contrast. The contrast performances of spherical and cylindrical Offner stretchers and the asymmetrical spherical Offner stretcher are compared using 3D ray tracing and beam propagation calculation within ±20 ps. The new stretcher shows the best contrast compared with the other two while minimizing spatiotemporal distortion of the pulse.

  • Open Access

    Advanced polarization-control strategies for enhancing performance in multipetawatt laser facilities

    by C. Jeon, A. N. Black, M. A. Spilatro, S.-W. Bahk, J. Bromage

    Our research focuses on designing all-reflective phase retarders (RPRs) to generate and maintain circularly polarized (CP) light for NSF OPAL and other multipetawatt laser facilities. Assuming that the input polarization is either s- or p-polarized, RPRs need to be used in an out-of-plane configuration. Here, we will discuss the impact of transporting and focusing optics on CP light.


  • Temporal contrast degradation from mid-spatial-frequency surface error on stretcher mirrors

    by B. Webb, C. Dorrer, S.-W. Bahk, C. Jeon, R. G. Roides, J. Bromage

    Temporal contrast degradation due to mid-spatial-frequency error in chirped-pulse amplification stretcher optics is studied. Third-order cross-correlation measurements reveal a temporal peak that appears when using two different mirrors processed by magnetorheological finishing, despite an improvement in rms roughness compared to a third unprocessed mirror. Simulations based on measured power spectral density show how the actual impact on contrast is different from measurements using a typical bandwidth-limited third-order cross correlator. Strategies are proposed to avoid this type of contrast degradation while exploiting computer numerically controlled polishing techniques for enhancement of surface figure and roughness.


  • Degradation of temporal contrast from post-pedestal interference with a chirped pulse in an optical parametric amplifier

    by Benjamin Webb, Chengyong Feng, Christophe Dorrer, Cheonha Jeon, R. G. Roides, Sara Bucht, Jake Bromage

    Pre-pedestal generation is observed in a 0.35-PW laser front end coming from a post-pedestal via instantaneous gain and pump depletion in an optical parametric amplifier during chirped-pulse amplification. Generalized simulations show how this effect arises from gain nonlinearity and applies to all optical parametric chirped-pulse–amplification systems with a post-pedestal. An experiment minimizing the effect of B-integral is used to isolate and study the newly observed conversion of a continuous post-pedestal into a continuous pre-pedestal. Matching numerical simulations confirm experimental results and additionally reveal how third-order dispersion largely controls the slope of the generated pre-pedestal.


  • Final amplifier of an ultra-intense all-OPCPA system with 13-J output signal energy and 41% pump-to-signal conversion efficiency

    by I. A. Begishev, Christophe Dorrer, Seung-Whan Bahk, Sara Bucht, Chengyong Feng, M. J. Guardalben, Cheonha Jeon, Chad Mileham, R. G. Roides, Michael Spilatro, et al.

    Optical parametric chirped-pulse amplification (OPCPA) using high-energy Nd:glass lasers has the potential to produce ultra-intense pulses (>1023 W/cm2). We report on the performance of the final high-efficiency amplifier in an OPCPA system based on large-aperture (63 × 63-mm2) partially deuterated potassium dihydrogen phosphate (DKDP) crystals. The seed beam (180-nm bandwidth, 110 mJ) was provided by the preceding OPCPA stages. A maximum pump-to-signal conversion efficiency of 41% and signal energy up to 13 J were achieved with a 52-mm-long DKDP crystal due to the flattop super-Gaussian pump beam profile and flat-in-time pulse shape.


  • Open Access

    Advanced Photon Acceleration Schemes for Tunable XUV/Soft X-Ray Sources

    by David Turnbull, Phil Franke, John P Palastro, Ildar Begishev, Robert Boni, Jake Bromage, Andrew J Howard, Joseph Katz, Dillon Ramsey, Tanner T Simpson, et al.

    We report on the advances made under the purview of DOE award number DE-SC0019135 that was active during the period: 09/01/2018–08/31/2021. The grant investigated the application of a “flying focus” to the problem of photon acceleration—in which a dynamic refractive index gradient is used to continuously upshift a probe beam’s frequency. Codes were written to describe the creation of ionization waves of arbitrary velocity (IWAVs) for use as a photon-accelerating medium, as well as the behavior of a witness pulse residing in said medium. Experiments first verified the spatiotemporal control over laser intensity provided by a chromatic flying focus, then used that ability to produce small-diameter IWAVs in the far-field with the expected dynamics, and finally demonstrated even further flexibility by producing large-diameter IWAVs in the laser quasi-far-field that maintained the beneficial dynamics. Multiple innovative diagnostics—spectrally resolved Schlieren and spectrally resolved interferometry—were pioneered in order to diagnose the IWAVs. For IWAV production in the laboratory, however, beam quality was identified as a key limitation in the quasi-far-field. Since the original chromatic flying focus was found to result in relatively long (ps duration) intensity peaks, which could limit some applications including photon acceleration, additional techniques were invented to provide similar spatiotemporalmore » control while also retaining ultrashort intensity peaks. While simulations have identified several interesting regimes for photon acceleration—first predicting the upshift of a counterpropagating witness pulse from the optical to the extreme ultraviolet in less than 1 cm, and later obtaining similar shifts in less than 100 μm in a simpler self-seeded configuration—experimental demonstration is left for future work. « less