ZWZhujiang Wang

Zhujiang Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Zhujiang Wang has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Region of Interest Selection in the Parameter Identification of Hyperelastic Materials under Biaxial Loading with the Virtual Fields Method: The Role of Edge Shear Stress in Identification Accuracy

    by Mingliang Jiang, Cong Liu, Zhujiang Wang

    Biaxial mechanical testing combined with the virtual fields method (VFM) has been increasingly employed to characterize hyperelastic materials. In our preliminary tests, we observed that when uniform-type virtual fields (VFs), originally developed for uniaxial tensile configurations, were applied to biaxial loading conditions, the nodes along the edges of the selected region of interest (ROI) exhibited lateral virtual displacements. These displacements generated additional external virtual work (EVW) owing to the inherent shear stresses along the ROI edges; however, since these stresses were experimentally inaccessible, this EVW contribution could not be reliably quantified and thus biased the identified parameters. Furthermore, the magnitude of this parasitic contribution was found to depend on the ROI size, as the shear stresses along the ROI edges changed correspondingly. These observations underscore the need for a systematic investigation into the effects of ROI selection and the underlying shear stresses on parameter identification. In parallel, although a trigonometric-type VF has been proposed for parameter identification, its underlying working mechanism remains insufficiently understood. To address these gaps, this study evaluated five cruciform ROIs of different sizes using the VFM in conjunction with full-field deformation data obtained from biaxial tests. Material parameters were extracted from each ROI under both the Mooney--Rivlin and Ogden hyperelastic formulations. The influence of ROI selection was assessed based on the capability of the identified parameters to reproduce the experimental load–displacement responses and the strain fields. The identified parameters obtained from uniform-type VFs alone were compared with those derived from a combination of uniform- and trigonometric-type VFs. The results demonstrate that 1) ROI3, with a span ratio of 0.49, effectively mitigates the adverse effects of additional EVW induced by shear stresses and represents the optimal compromise for parameter identification; 2) the introduction of the trigonometric-type VF reduces the condition number of solving a linear system of equations, thereby enhancing the numerical stability of parameter identification. Overall, this study provides a comprehensive methodological framework for investigating the role of ROI selection and the underlying shear stresses on the parameter identification of hyperelastic materials under biaxial loading.

  • An electromagnetically actuated soft in-pipe crawler with anisotropic friction inspired by snake locomotion

    by Awais Shah, Qiyuan Sun, Jin Wang, Yu Yang, Yufei Weng, Zhujiang Wang

    Purpose: This study aims to develop a novel snake-inspired soft robot prototype designed for efficient crawling within complex and confined pipelines. As a preliminary proof-of-concept, this study evaluates the fundamental locomotion mechanisms and feasibility of the proposed design, aiming to bridge laboratory research with a broad spectrum of future applications, including but not limited to clinical minimally invasive interventions and industrial inspection. Design/methodology/approach: The proposed robot integrates a flexible solenoid coil, a moving permanent magnet, a fixed head magnet and a sawtooth-textured silicone sleeve that generates directional friction against the pipe wall. During each voltage pulse, the internal magnet is driven toward the head to elongate the compliant body, while magnetic repulsion and elastic recovery reset the actuator after the pulse. Locomotion performance is experimentally evaluated in straight and bent PVC tubes at equivalent drive levels of 6–12V. In addition, a lumped-parameter dynamic model is identified from synchronized displacement and current measurements to capture the robot’s axial dynamics. Findings: The robot demonstrates reliable forward crawling in straight pipes and successfully traverses bent PVC tubes with bend angles up to 45°. In a 0.5 m straight tube, the prototype achieves increasing locomotion speed with increasing drive level, reaching a maximum of 0.24 body lengths per second at 12V. The identified lumped-parameter model reproduces the main measured acceleration transients with good agreement, showing that the dominant dynamics of the soft in-pipe crawler can be represented using a compact experimentally fitted framework. Originality/value: This study presents a soft in-pipe crawling robot that combines embedded electromagnetic actuation with frictional rectification in a compact compliant structure. Unlike many soft crawling systems that rely on pneumatic supply or external magnetic field generators, the proposed design uses an internal coil–magnet arrangement and a textured silicone sleeve to achieve rectilinear locomotion in confined channels. The work also contributes an experimentally identified dynamic model that links electrical input to locomotion behavior and supports future design optimization and control development.

  • Open Access

    Development of a Graded Lattice Structure Design and Optimization Method with Complex Boundary Surface Constraints

    by Zhujiang Wang, Yizhou Wang, Bin Zhai

    Graded lattice structures (GLS) are used widely in the areas of 3D printed sensors, personalized wearable devices, robotics, energy absorption, etc., and have a prospective future in the field of personalized medical devices. The large-scale applications of GLS-based personalized medical devices require a GLS design method that could handle the challenges caused by diverse boundary surface constraints and various requirements of graded mechanical properties [1,2], due to patient-specific care needs. In this work, the proposed automatic seed generation algorithm-based GLS design approach is a prospective solution to promote the wide application of GLS-based personalized medical devices [3,4]. The core idea of the proposed GLS design and optimization approach is (a) using an automatic point cloud generation algorithm to generate nonuniform seed distributions inside a domain with any shape; (b) raw GLS is then generated based on the seed distribution; (c) the radius of the raw GLS is further optimized based on finite element truss analysis. As seed distributions are generated according to the required boundary shapes of the target GLS and the graded mechanical properties are optimized based on finite element analysis, the resulting GLS is guaranteed to satisfy the requirements of boundary constraints and graded mechanical properties. Finally, several demos including a 3D-printed shoe sole, a bone scaffold, and an energy absorber are created, and the results indicate that the proposed GLS design and optimization method works very well.

  • Open Access

    Reformulation of the Virtual Fields Method Based on the Variation of Elastic Energy for Hyperelastic Materials

    by Mingliang Jiang, Zhujiang Wang

    This work deals with the parameter identification of invariant-based hyperelastic materials using the virtual fields method (VFM). Combined with the full-field deformation data obtained from the digital image correlation (DIC), VFM has been utilized to characterize the mechanical properties of hyperelastic materials [1]. In the conventional formulation of the VFM, the calculation of the internal virtual work (IVW) needs to obtain the stress and conjugate virtual strains, which requires a lot of calculation and derivation work. In this paper, the VFM is reformulated by calculating the IVW through the variation of elastic energy, which is more concise and easier to be implemented [2]. To illustrate this reformulated framework, a neo-Hookeantyped material and a fiber-reinforced neo-Hookean-typed material are selected for study, and biaxial tests which give rise to heterogeneous deformation fields are performed on these materials. Finally, material parameters are successfully extracted using the reformulated VFM framework.


  • PIMesh: An automatic point cloud and unstructured mesh generation algorithm for meshless methods and finite element analysis–with applications in surgical simulations

    by Zhujiang Wang, Arun R. Srinivasa, Junuthula N. Reddy, Adam Dubrowski

    We propose a point cloud and mesh generation algorithm, particle injection mesh generator (PIMesh), that can be used to generate optimized high‐quality point clouds and unstructured meshes for domains in any shape with minimum (or even no) user intervention. The domains can be scanned images in OBJ format in 2D and 3D or just a line drawing in 2D. Mesh grading can also be easily controlled. The PIMesh is robust and easy to be implemented and is useful for a variety of applications, ranging from generating point clouds for meshless methods, mesh generation for finite element methods, computer graphics applications and surgical simulators. The core idea of the PIMesh is that a mesh domain is considered as an “airtight container” into which particles are “injected” at one or multiple selected interior points. The motion of the particles is controlled by a pseudo‐molecular dynamics (PMD) formulation with a pairwise purely repelling “force” moderated by an absolute velocity dependent drag force. The particles repel each other and occupy the whole domain somewhat like blowing up a balloon. When the container is full of particles and the motion is stopped (the particles can be considered as a point cloud), a Delaunay triangulation algorithm is employed to link the particles together to generate an unstructured mesh. The performance of the PIMesh and the comparison with other unstructured mesh generation approaches are demonstrated through generating node distributions and meshes for several 2D and 3D object domains including a scanned image of bones and others.


  • Topology Optimization of Lightweight Structures With Application to Bone Scaffolds and 3D Printed Shoes for Diabetics

    by Zhujiang Wang, Arun Srinivasa, J. N. Reddy, Adam Dubrowski

    An automatic complex topology lightweight structure generation method (ACTLSGM) is presented to automatically generate 3D models of lightweight truss structures with a boundary surface of any shape. The core idea of the ACTLSGM is to use the PIMesh, a mesh generation algorithm developed by the authors, to generate node distributions inside the object representing the boundary surface of the target complex topology structures; raw lightweight truss structures are then generated based on the node distributions; the resulting lightweight truss structure is then created by adjusting the radius of the raw truss structures using an optimization algorithm based on finite element truss analysis. The finite element analysis-based optimization algorithm can ensure that the resulting structures satisfy the design requirements on stress distributions or stiffness. Three demos, including a lightweight structure for a cantilever beam, a femur bone scaffold, and a 3D shoe sole model with adaptive stiffness, can be used to adjust foot pressure distributions for patients with diabetic foot problems and are generated to demonstrate the performance of the ACTLSGM. The ACTLSGM is not limited to generating 3D models of medical devices, but can be applied in many other fields, including 3D printing infills and other fields where customized lightweight structures are required.


  • Extracting material parameters of silicone elastomers under biaxial tensile tests using virtual fields method and investigating the effect of missing deformation data close to specimen edges on parameter identification

    by Mingliang Jiang, Zhujiang Wang, Alan D. Freed, Michael R. Moreno, Veysel Erel, Adam Dubrowski

    In this work, virtual fields method (VFM) is applied to extract the constitutive parameter of silicone elastomers under equi-biaxial and general biaxial tests; the influence of missing deformation data near specimen edges and noise introduced by digital image correlation (DIC) on parameter identification using VFM is investigated. The results indicate that the negative impact of the missing data and noise can be mitigated by scaling the load applied to the specimen boundary properly and extracting parameters based on the deformation fields of all loading steps through the least square method.