Sanchita Kundu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sanchita Kundu has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Avijit Pramanik
Jackson State University
14 shared publications Olorunsola Praise Kolawole
Jackson State University
14 shared publications- Paresh Chandra Ray
Jackson State University
14 shared publications Kaelin Gates
Department of Chemistry and Biochemistry
12 shared publicationsShivangee Rai
Department of Chemistry and Biochemistry
9 shared publications- Alamgir Hossain
Department of Chemistry and Biochemistry, Jackson State University, Jackson, USA
4 shared publications
Latest Publications
- Open Access
- 19 October 2026
- Published by American Chemical Society (ACS) in Accounts of Materials Research
Integrated Heterostructure Platform for SERS Fingerprinting of Biomolecules and Mechanistic Deciphering of Photocatalytic Intermediates
Conspectus: Surface-enhanced Raman spectroscopy (SERS), which integrates conventional Raman spectroscopy with nanostructured substrates, has emerged as a powerful, nondestructive analytical technique for label-free chemical and biological fingerprinting. Its high sensitivity and noninvasive nature have enabled real-time detection and characterization of DNA, RNA, pathogens, and disease biomarkers. Beyond biomolecular analysis, SERS has demonstrated exceptional capability for identifying, monitoring, and understanding short-lived reaction intermediates, providing critical insights into photocatalytic reaction mechanisms. Consequently, SERS continues to drive advances across chemistry, materials science, biology, and environmental monitoring, with substrate performance being fundamentally determined by the properties of the constituent nanomaterials. Zero-dimensional (0D) plasmonic nanoparticles, one-dimensional (1D) nanowires, nanotubes, and nanorods, as well as two-dimensional (2D) nanosheets, play pivotal roles in Raman signal enhancement through both electromagnetic mechanism (EM) and chemical mechanism (CM) contributions. Despite these advancements, achieving precise nanoscale control over plasmonic nanostructure organization remains a major challenge for reliable molecular fingerprinting. To address this issue, we engineered heterostructure SERS substrates with optimized EM and CM enhancement mechanisms, an emerging strategy at the forefront of SERS substrate design. Leveraging the inherent molecular specificity of Raman spectroscopy, these heterostructures successfully generate characteristic spectral fingerprints of biomolecules, thereby enhancing the sensitivity, selectivity, and reliability of biomolecular detection. In this Account, we present our research efforts toward the design and development of heterostructure-based SERS platforms for label-free molecular recognition, leveraging molecule-specific vibrational fingerprints for sensitive and selective detection. We first introduce our framework for SERS substrate engineering, which integrates precise plasmonic hot spot design to maximize EM enhancement with strategically selected semiconductors, 1D, and 2D materials that promote CM enhancement through efficient interfacial charge transfer. This synergistic design strategy has enabled the development of next-generation SERS substrates that combine ultrahigh sensitivity, excellent signal reproducibility, and application-specific functionality. Drawing on over a decade of research from our laboratory, we next present representative examples of heterostructure-based SERS platforms for biomolecular fingerprinting of viruses, bacteria, and disease-associated biomarkers. We further highlight the broader utility of these SERS platforms in photocatalytic studies, where operando SERS enables real-time monitoring of reactant consumption and product formation while simultaneously capturing the vibrational fingerprints of trace and transient interfacial reaction intermediates. Finally, we discuss the key challenges facing the field and provide perspectives on emerging opportunities and future research directions. We hope that the insights provided herein will serve as a valuable foundation for researchers seeking to develop next-generation, highly reliable heterostructure-based SERS substrates with multifunctional molecular fingerprinting capabilities.
- 19 October 2026
- Published by American Chemical Society (ACS) in Accounts of Materials Research
Open AccessIntegrated Heterostructure Platform for SERS Fingerprinting of Biomolecules and Mechanistic Deciphering of Photocatalytic Intermediates
Conspectus: Surface-enhanced Raman spectroscopy (SERS), which integrates conventional Raman spectroscopy with nanostructured substrates, has emerged as a powerful, nondestructive analytical technique for label-free chemical and biological fingerprinting. Its high sensitivity and noninvasive nature have enabled real-time detection and characterization of DNA, RNA, pathogens, and disease biomarkers. Beyond biomolecular analysis, SERS has demonstrated exceptional capability for identifying, monitoring, and understanding short-lived reaction intermediates, providing critical insights into photocatalytic reaction mechanisms. Consequently, SERS continues to drive advances across chemistry, materials science, biology, and environmental monitoring, with substrate performance being fundamentally determined by the properties of the constituent nanomaterials. Zero-dimensional (0D) plasmonic nanoparticles, one-dimensional (1D) nanowires, nanotubes, and nanorods, as well as two-dimensional (2D) nanosheets, play pivotal roles in Raman signal enhancement through both electromagnetic mechanism (EM) and chemical mechanism (CM) contributions. Despite these advancements, achieving precise nanoscale control over plasmonic nanostructure organization remains a major challenge for reliable molecular fingerprinting. To address this issue, we engineered heterostructure SERS substrates with optimized EM and CM enhancement mechanisms, an emerging strategy at the forefront of SERS substrate design. Leveraging the inherent molecular specificity of Raman spectroscopy, these heterostructures successfully generate characteristic spectral fingerprints of biomolecules, thereby enhancing the sensitivity, selectivity, and reliability of biomolecular detection. In this Account, we present our research efforts toward the design and development of heterostructure-based SERS platforms for label-free molecular recognition, leveraging molecule-specific vibrational fingerprints for sensitive and selective detection. We first introduce our framework for SERS substrate engineering, which integrates precise plasmonic hot spot design to maximize EM enhancement with strategically selected semiconductors, 1D, and 2D materials that promote CM enhancement through efficient interfacial charge transfer. This synergistic design strategy has enabled the development of next-generation SERS substrates that combine ultrahigh sensitivity, excellent signal reproducibility, and application-specific functionality. Drawing on over a decade of research from our laboratory, we next present representative examples of heterostructure-based SERS platforms for biomolecular fingerprinting of viruses, bacteria, and disease-associated biomarkers. We further highlight the broader utility of these SERS platforms in photocatalytic studies, where operando SERS enables real-time monitoring of reactant consumption and product formation while simultaneously capturing the vibrational fingerprints of trace and transient interfacial reaction intermediates. Finally, we discuss the key challenges facing the field and provide perspectives on emerging opportunities and future research directions. We hope that the insights provided herein will serve as a valuable foundation for researchers seeking to develop next-generation, highly reliable heterostructure-based SERS substrates with multifunctional molecular fingerprinting capabilities.
- Open Access
- 4 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (41) , 63944-63959
All-in-One Photocatalytic-Photothermal-SERS Nanoknives Platform for Solar-Driven Inactivation of Antibiotic-Resistant Superbugs and Selective Azoaromatic Synthesis
Harnessing sunlight-driven renewable energy provides a sustainable strategy for the rapid eradication of antibiotic-resistant superbugs and selective organic synthesis. However, the development of highly efficient solar photocatalytic materials remains a significant challenge. Herein, we report the rational design of a plasmonic MXene-Ag@Au-nanostar based all-in-one photocatalytic-photothermal-SERS nanoknives platform that harnesses solar energy to simultaneously achieve highly efficient inactivation of antibiotic-resistant superbugs and selective azoaromatic synthesis. By synergistically integrating broad-spectrum solar harvesting (350–950 nm), high photothermal conversion efficiency (∼70%), intense SERS enhancement, and efficient hot-electron and reactive oxygen species (ROS) generation, the heterostructure delivers exceptional photocatalytic activity toward selective azoaromatic synthesis. Under solar irradiation, the multifunctional nanoplatform promotes the selective oxidation of 4-aminothiophenol (4-ATP) to 4,4′-dimercaptoazobenzene (4,4′-DMAB) with conversion yields exceeding 69%, while enabling the selective reduction of 4-nitrothiophenol (4-NTP) to 4,4′-DMAB with conversion efficiencies greater than 72%. Mechanistic investigations further demonstrated that ROS, photothermal heating, and hot-carrier transfer collectively contribute to the remarkably enhanced photocatalytic performance. Furthermore, the heterostructure achieved rapid solar-driven inactivation of carbapenem-resistant E. coli, multidrug-resistant Salmonella DT104, and MRSA superbugs, within 15–25 min of irradiation. Mechanistic investigations revealed that the outstanding superbug inactivation activity originated from the synergistic interplay of MXene nanoknives that physically disrupted bacterial membranes, which facilitates the penetration of ROS into bacterial cells, resulting in severe oxidative stress and rapid cell death. Collectively, this work establishes a strategy for designing active-site-engineered “All-in-One” platforms for sustainable solar-driven chemical synthesis and rapid superbug inactivation.
- 4 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (41) , 63944-63959
Open AccessAll-in-One Photocatalytic-Photothermal-SERS Nanoknives Platform for Solar-Driven Inactivation of Antibiotic-Resistant Superbugs and Selective Azoaromatic Synthesis
Harnessing sunlight-driven renewable energy provides a sustainable strategy for the rapid eradication of antibiotic-resistant superbugs and selective organic synthesis. However, the development of highly efficient solar photocatalytic materials remains a significant challenge. Herein, we report the rational design of a plasmonic MXene-Ag@Au-nanostar based all-in-one photocatalytic-photothermal-SERS nanoknives platform that harnesses solar energy to simultaneously achieve highly efficient inactivation of antibiotic-resistant superbugs and selective azoaromatic synthesis. By synergistically integrating broad-spectrum solar harvesting (350–950 nm), high photothermal conversion efficiency (∼70%), intense SERS enhancement, and efficient hot-electron and reactive oxygen species (ROS) generation, the heterostructure delivers exceptional photocatalytic activity toward selective azoaromatic synthesis. Under solar irradiation, the multifunctional nanoplatform promotes the selective oxidation of 4-aminothiophenol (4-ATP) to 4,4′-dimercaptoazobenzene (4,4′-DMAB) with conversion yields exceeding 69%, while enabling the selective reduction of 4-nitrothiophenol (4-NTP) to 4,4′-DMAB with conversion efficiencies greater than 72%. Mechanistic investigations further demonstrated that ROS, photothermal heating, and hot-carrier transfer collectively contribute to the remarkably enhanced photocatalytic performance. Furthermore, the heterostructure achieved rapid solar-driven inactivation of carbapenem-resistant E. coli, multidrug-resistant Salmonella DT104, and MRSA superbugs, within 15–25 min of irradiation. Mechanistic investigations revealed that the outstanding superbug inactivation activity originated from the synergistic interplay of MXene nanoknives that physically disrupted bacterial membranes, which facilitates the penetration of ROS into bacterial cells, resulting in severe oxidative stress and rapid cell death. Collectively, this work establishes a strategy for designing active-site-engineered “All-in-One” platforms for sustainable solar-driven chemical synthesis and rapid superbug inactivation.
- Open Access
- 23 June 2026
- Published by Qeios Ltd
Review of: "A Comprehensive Review of Surface-Modified Adsorbents for Improving Per- and Polyfluoroalkyl Substances (PFAS) Removal: Materials, Mechanisms, and Regeneration Strategies"
REVIEWER REPORT The manuscript presents a timely and comprehensive review of surface-modified adsorbents for PFAS removal. The topic is important, and the manuscript is generally well-organized with useful summary tables and discussions on adsorptio...
- 23 June 2026
- Published by Qeios Ltd
Open AccessReview of: "A Comprehensive Review of Surface-Modified Adsorbents for Improving Per- and Polyfluoroalkyl Substances (PFAS) Removal: Materials, Mechanisms, and Regeneration Strategies"
REVIEWER REPORT The manuscript presents a timely and comprehensive review of surface-modified adsorbents for PFAS removal. The topic is important, and the manuscript is generally well-organized with useful summary tables and discussions on adsorptio...
- Open Access
- 25 January 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (5) , 8094-8106
Designing Bioconjugated Ti 3 C 2 MXene QDs with Excellent Two-Photon Absorption Coefficients for Targeted NIR-II Imaging of Triple-Negative Breast Cancer Cells
Since NIR-II (1000–1700 nm) imaging offers deeper tissue penetration, improved resolution, and higher signal-to-background ratios, development of two-photon excitation NIR-II probes is very important for next-generation bioimaging. Triple-negative breast cancer (TNBC) is inherently aggressive, with poor prognosis and therapeutic resistance, where two-photon diagnostics using the NIR-II probe are very important for effective disease monitoring and management. Herein, we report on the design of strong quantum-confined bioconjugated Ti3C2 MXene quantum dots (MXene QDs)-based NIR-II probe with a very large two-photon absorption (TPA) coefficient (β), which can be used for targeted two-photon fluorescence (TPF) imaging of live cancer cells. Our finding reveals that due to the strong quantum confinement effect, anti-AX antibody-conjugated MXene QDs exhibit very high two-photon absorption coefficients (β = −21.9 cm GW–1), which are several orders of magnitude higher than the β for Ti3C2 MXene nanosheets, Nb2C MXene QDs, black phosphorus QDs, and MoS2 QDs. Furthermore, we show that photostable and biocompatible antibody-conjugated Ti3C2 MXene QDs can be used as NIR-II nanoprobes for the targeted imaging of live MDA-MB-231 and Hs 578T triple-negative breast cancer (TNBC) cells. Moreover, reported data demonstrated that antibody-conjugated QDs have the capability to distinguish TNBC cells with nontargeted HER-2(+) SK-BR-3 breast cancer cells and (ER) (+) MCF-7 breast cancer cells. Overall, this work provides a facile approach to design antibody-conjugated Ti3C2 MXene QDs for NIR-II bioimaging.
- 25 January 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (5) , 8094-8106
Open AccessDesigning Bioconjugated Ti 3 C 2 MXene QDs with Excellent Two-Photon Absorption Coefficients for Targeted NIR-II Imaging of Triple-Negative Breast Cancer Cells
Since NIR-II (1000–1700 nm) imaging offers deeper tissue penetration, improved resolution, and higher signal-to-background ratios, development of two-photon excitation NIR-II probes is very important for next-generation bioimaging. Triple-negative breast cancer (TNBC) is inherently aggressive, with poor prognosis and therapeutic resistance, where two-photon diagnostics using the NIR-II probe are very important for effective disease monitoring and management. Herein, we report on the design of strong quantum-confined bioconjugated Ti3C2 MXene quantum dots (MXene QDs)-based NIR-II probe with a very large two-photon absorption (TPA) coefficient (β), which can be used for targeted two-photon fluorescence (TPF) imaging of live cancer cells. Our finding reveals that due to the strong quantum confinement effect, anti-AX antibody-conjugated MXene QDs exhibit very high two-photon absorption coefficients (β = −21.9 cm GW–1), which are several orders of magnitude higher than the β for Ti3C2 MXene nanosheets, Nb2C MXene QDs, black phosphorus QDs, and MoS2 QDs. Furthermore, we show that photostable and biocompatible antibody-conjugated Ti3C2 MXene QDs can be used as NIR-II nanoprobes for the targeted imaging of live MDA-MB-231 and Hs 578T triple-negative breast cancer (TNBC) cells. Moreover, reported data demonstrated that antibody-conjugated QDs have the capability to distinguish TNBC cells with nontargeted HER-2(+) SK-BR-3 breast cancer cells and (ER) (+) MCF-7 breast cancer cells. Overall, this work provides a facile approach to design antibody-conjugated Ti3C2 MXene QDs for NIR-II bioimaging.
- 7 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (10) , 9254-9267
Harnessing Quintuple Layer Dependent Antisuperbug Properties from 2D Bi2Se3 Topological Quantum Material for Targeted Eradication of MRSA Biofilms
Staphylococcus aureus (MRSA) biofilms significantly hinder the effectiveness of conventional antimicrobial agents, which pose a major challenge in treating biofilm infections in clinics. In the current paper, we unveiled targeted superbug biofilm eradication using Bi2Se3 nanoplate based quantum material, where antisuperbug properties are strongly influenced by its unique layered structure composed of quintuple layers (QLs). We show that control over targeted eradication of MRSA superbugs can be achieved by harnessing QL dependent anti-MRSA properties for the Bi2Se3 nanoplate. Reported data demonstrated that the quantum material has the capability for 100% selective eradication of MRSA by selectively targeting the lipoteichoic acid (LTA) of Gram-positive bacteria. However, due to the lack of binding with lipopolysaccharide of Gram-negative superbugs, the quantum material lacks effective eradication of carbapenem-resistant E. coli and Salmonella DT104 superbugs. Experimental data show that the 3QL thick Bi2Se3 nanoplate has the capability for wrapping MRSA bacteria very strongly via binding with LTA, which can physically enclose the MRSA and allow superbugs to effectively isolate them from their environment, ultimately inhibiting bacterial proliferation. In addition, the minimum inhibitory concentration (MIC) value changes by an order of magnitude (∼10 to ∼100 μg mL-1) as the thickness of the nanoplate varies from 3 to 15 QLs. Moreover, the nanoplate has the capability for the selective inhibition of MRSA biofilm growth, where the minimum biofilm eradication concentration (MBEC) varies by more than an order of magnitude with the variation of QLs. These findings demonstrate the potential of quantum materials to address the growing threat of MRSA infections.
- 7 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (10) , 9254-9267
Harnessing Quintuple Layer Dependent Antisuperbug Properties from 2D Bi2Se3 Topological Quantum Material for Targeted Eradication of MRSA Biofilms
Staphylococcus aureus (MRSA) biofilms significantly hinder the effectiveness of conventional antimicrobial agents, which pose a major challenge in treating biofilm infections in clinics. In the current paper, we unveiled targeted superbug biofilm eradication using Bi2Se3 nanoplate based quantum material, where antisuperbug properties are strongly influenced by its unique layered structure composed of quintuple layers (QLs). We show that control over targeted eradication of MRSA superbugs can be achieved by harnessing QL dependent anti-MRSA properties for the Bi2Se3 nanoplate. Reported data demonstrated that the quantum material has the capability for 100% selective eradication of MRSA by selectively targeting the lipoteichoic acid (LTA) of Gram-positive bacteria. However, due to the lack of binding with lipopolysaccharide of Gram-negative superbugs, the quantum material lacks effective eradication of carbapenem-resistant E. coli and Salmonella DT104 superbugs. Experimental data show that the 3QL thick Bi2Se3 nanoplate has the capability for wrapping MRSA bacteria very strongly via binding with LTA, which can physically enclose the MRSA and allow superbugs to effectively isolate them from their environment, ultimately inhibiting bacterial proliferation. In addition, the minimum inhibitory concentration (MIC) value changes by an order of magnitude (∼10 to ∼100 μg mL-1) as the thickness of the nanoplate varies from 3 to 15 QLs. Moreover, the nanoplate has the capability for the selective inhibition of MRSA biofilm growth, where the minimum biofilm eradication concentration (MBEC) varies by more than an order of magnitude with the variation of QLs. These findings demonstrate the potential of quantum materials to address the growing threat of MRSA infections.
- 29 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
Doxycycline-Decorated Silver Nanoparticle-Based Plasmon-Enhanced Fluorescence Nanoplatform for Accurate Prediction of Antibiotic Susceptibility against Superbugs
Antibiotic-resistant superbugs are a global threat that are predicted to become the leading cause of death worldwide. To effectively combat superbugs, accurate prediction of antibiotic susceptibility is crucial, which takes more than 24 h in clinics now. Herein, we report doxycycline (DX) antibiotic-decorated silver nanoparticle (AgNP)-based plasmonic metal-enhanced fluorescence (PMEF) nanoplatforms for accurate, rapid, and sensitive prediction of antibiotic susceptibility against different superbugs. Using time-resolved emission and three-dimensional finite-difference time domain (3D-FDTD) simulation data, we show that due to the plasmonic coupling between neighboring AgNPs in "hotspots", very low fluorescence signals from DX can be enhanced ∼75 times via enhancing the higher rate of excitation and radiative decay rates. We show that in the presence of different bacterial strains, depending on the doxycycline antibiotic susceptibility, the antibiotics are released from the plasmon surface and change PMEF intensity, which can be used for determining antibiotic susceptibility against superbugs. Experimental data indicate a huge change of PMEF intensity in the presence of MRSA, demonstrating that the antibiotic susceptibility for doxycycline antibiotics is very good for MRSA. However, there is no change of PMFE intensity in the presence of Salmonella DT104 or carbapenem-resistant Escherichia coli strain, indicating that the antibiotic susceptibility of DX is very poor against those superbugs. Colony counting and LIVE/DEAD BacLight Bacterial Viability Kit data confirmed the observed PMEF results. We show that within 30 min, PMFE can determine the susceptibility of doxycycline antibiotics against different superbugs. Reported data indicate that the PMFE sensitivity for DX susceptibility testing can be as low as 50 CFU/mL MRSA superbugs. The current report shows the potential of DX-AgNP-based PMEF for rapid and accurate diagnosis of antibiotic susceptibility for superbugs.
- 29 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
Doxycycline-Decorated Silver Nanoparticle-Based Plasmon-Enhanced Fluorescence Nanoplatform for Accurate Prediction of Antibiotic Susceptibility against Superbugs
Antibiotic-resistant superbugs are a global threat that are predicted to become the leading cause of death worldwide. To effectively combat superbugs, accurate prediction of antibiotic susceptibility is crucial, which takes more than 24 h in clinics now. Herein, we report doxycycline (DX) antibiotic-decorated silver nanoparticle (AgNP)-based plasmonic metal-enhanced fluorescence (PMEF) nanoplatforms for accurate, rapid, and sensitive prediction of antibiotic susceptibility against different superbugs. Using time-resolved emission and three-dimensional finite-difference time domain (3D-FDTD) simulation data, we show that due to the plasmonic coupling between neighboring AgNPs in "hotspots", very low fluorescence signals from DX can be enhanced ∼75 times via enhancing the higher rate of excitation and radiative decay rates. We show that in the presence of different bacterial strains, depending on the doxycycline antibiotic susceptibility, the antibiotics are released from the plasmon surface and change PMEF intensity, which can be used for determining antibiotic susceptibility against superbugs. Experimental data indicate a huge change of PMEF intensity in the presence of MRSA, demonstrating that the antibiotic susceptibility for doxycycline antibiotics is very good for MRSA. However, there is no change of PMFE intensity in the presence of Salmonella DT104 or carbapenem-resistant Escherichia coli strain, indicating that the antibiotic susceptibility of DX is very poor against those superbugs. Colony counting and LIVE/DEAD BacLight Bacterial Viability Kit data confirmed the observed PMEF results. We show that within 30 min, PMFE can determine the susceptibility of doxycycline antibiotics against different superbugs. Reported data indicate that the PMFE sensitivity for DX susceptibility testing can be as low as 50 CFU/mL MRSA superbugs. The current report shows the potential of DX-AgNP-based PMEF for rapid and accurate diagnosis of antibiotic susceptibility for superbugs.
- 17 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (7) , 5959-5969
Multifunctional Nanoplatform for Highly Accurate Profiling of Triple-Negative Breast Cancer-Derived Chemo- and Immunotherapy Resistance Exosomes
Triple-negative breast cancer (TNBC) is the most malignant breast cancer with a higher mortality rate, which is due to the lack of targeted therapies and the development of resistance to chemotherapy and immunotherapy. Since the ubiquitin carboxyl-terminal hydrolase L1 (UCH-L1) (+) exosome promotes chemoresistance and the programmed cell death ligand-1 (PD-L1) (+) exosome plays a crucial role in immunotherapy resistance, there is an urgent need in clinics to explore strategies for the rapid profiling of UCH-L1(+) and PD-L1(+) exosomes from blood to predict chemo- and immunotherapy treatment outcomes. Herein, we develop a multifunctional nanoplatform using antibody-conjugated green- and red-emissive carbon quantum dots attached to cobalt ferrite (CoFe2O4) magnetic nanoparticles for the highly accurate profiling of TNBC-derived UCH-L1(+) and PD-L1(+) exosomes. Specifically, by employing multiple microscopic, spectroscopic, and SQUID magnetometer techniques, we show that the multifunctional nanoplatform exhibits good chemical stability, high photostability, strong photoluminescence quantum yield, excellent superparamagnetic behavior, and biocompatibility. Moreover, by leveraging strategically designed anti-UCH-L1 antibody-attached red luminescence (660 nm) magnetic nanoplatform and anti-PD-L1 antibody-attached green luminescence (530 nm) magnetic nanoplatform, the reported data demonstrate that the multifunctional nanoplatform has the capability for capturing and screening ∼100% UCH-L1(+) and PD-L1(+) exosomes selectively from infected whole-blood samples. Furthermore, we showcase the potential application for the screening of UCH-L1 (+) and PD-L1(+) exosomes simultaneously from whole blood, which indicates that the nanoplatform may be used for monitoring chemotherapeutic and immunotherapeutic resistance of cancer.
- 17 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (7) , 5959-5969
Multifunctional Nanoplatform for Highly Accurate Profiling of Triple-Negative Breast Cancer-Derived Chemo- and Immunotherapy Resistance Exosomes
Triple-negative breast cancer (TNBC) is the most malignant breast cancer with a higher mortality rate, which is due to the lack of targeted therapies and the development of resistance to chemotherapy and immunotherapy. Since the ubiquitin carboxyl-terminal hydrolase L1 (UCH-L1) (+) exosome promotes chemoresistance and the programmed cell death ligand-1 (PD-L1) (+) exosome plays a crucial role in immunotherapy resistance, there is an urgent need in clinics to explore strategies for the rapid profiling of UCH-L1(+) and PD-L1(+) exosomes from blood to predict chemo- and immunotherapy treatment outcomes. Herein, we develop a multifunctional nanoplatform using antibody-conjugated green- and red-emissive carbon quantum dots attached to cobalt ferrite (CoFe2O4) magnetic nanoparticles for the highly accurate profiling of TNBC-derived UCH-L1(+) and PD-L1(+) exosomes. Specifically, by employing multiple microscopic, spectroscopic, and SQUID magnetometer techniques, we show that the multifunctional nanoplatform exhibits good chemical stability, high photostability, strong photoluminescence quantum yield, excellent superparamagnetic behavior, and biocompatibility. Moreover, by leveraging strategically designed anti-UCH-L1 antibody-attached red luminescence (660 nm) magnetic nanoplatform and anti-PD-L1 antibody-attached green luminescence (530 nm) magnetic nanoplatform, the reported data demonstrate that the multifunctional nanoplatform has the capability for capturing and screening ∼100% UCH-L1(+) and PD-L1(+) exosomes selectively from infected whole-blood samples. Furthermore, we showcase the potential application for the screening of UCH-L1 (+) and PD-L1(+) exosomes simultaneously from whole blood, which indicates that the nanoplatform may be used for monitoring chemotherapeutic and immunotherapeutic resistance of cancer.
- Open Access
- 4 March 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (10) , 10675-10684
Insight into the Photocatalytic Degradation Mechanism for “Forever Chemicals” PFNA by Reduced Graphene Oxide/WO3 Nanoflower Heterostructures
Water contamination with "forever chemicals" like per- and polyfluoroalkyl substances (PFAS) poses significant toxicity to the environment. Since they are the most persistent synthetic chemicals that hardly degrade in the natural environment and are carcinogenic to humans, there is an urgent need to discover novel processes for destroying PFAS. Herein, we report on the design of a reduced graphene oxide (r-GO)/WO3 nanoflower (WO3-NF)-based heterostructure for harnessing 365 nm light-driven photocatalytic oxidation and reduction process toward the photocatalytic degradation of perfluorononanoic acid (PFNA). Moreover, reported data reveal that using an r-GO/WO3-NF heterostructure photocatalyst, 100% PFNA degradation and 14% defluorination can be achieved in the presence of isopropyl alcohol as the hydroxy radical (•OH) quencher or glucose as a hot hole (h+) quencher after exposure to 365 nm light for 22 h. A reported mechanistic study shows synergistic oxidation and reduction processes are vital for the complete degradation of PFNA, where the hydrated electron (eaq -) plays a key role as a reducing agent and h+ and •OH act as oxidation agents. Furthermore, the photocatalytic destruction mechanism study indicates that chain shortening via C-C bond breaking and defluorination via C-F bond breaking are major pathways for PFNA degradation. A wavelength-dependent study shows that only 22% degradation can be achieved after exposure to 532 nm light for 22 h, which is due to the lack of the formation of hydrated electrons (eaq -). The current study sheds light on the construction of the r-GO/WO3 NF heterojunction for the highly efficient degradation of PFAS.
- 4 March 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (10) , 10675-10684
Open AccessInsight into the Photocatalytic Degradation Mechanism for “Forever Chemicals” PFNA by Reduced Graphene Oxide/WO3 Nanoflower Heterostructures
Water contamination with "forever chemicals" like per- and polyfluoroalkyl substances (PFAS) poses significant toxicity to the environment. Since they are the most persistent synthetic chemicals that hardly degrade in the natural environment and are carcinogenic to humans, there is an urgent need to discover novel processes for destroying PFAS. Herein, we report on the design of a reduced graphene oxide (r-GO)/WO3 nanoflower (WO3-NF)-based heterostructure for harnessing 365 nm light-driven photocatalytic oxidation and reduction process toward the photocatalytic degradation of perfluorononanoic acid (PFNA). Moreover, reported data reveal that using an r-GO/WO3-NF heterostructure photocatalyst, 100% PFNA degradation and 14% defluorination can be achieved in the presence of isopropyl alcohol as the hydroxy radical (•OH) quencher or glucose as a hot hole (h+) quencher after exposure to 365 nm light for 22 h. A reported mechanistic study shows synergistic oxidation and reduction processes are vital for the complete degradation of PFNA, where the hydrated electron (eaq -) plays a key role as a reducing agent and h+ and •OH act as oxidation agents. Furthermore, the photocatalytic destruction mechanism study indicates that chain shortening via C-C bond breaking and defluorination via C-F bond breaking are major pathways for PFNA degradation. A wavelength-dependent study shows that only 22% degradation can be achieved after exposure to 532 nm light for 22 h, which is due to the lack of the formation of hydrated electrons (eaq -). The current study sheds light on the construction of the r-GO/WO3 NF heterojunction for the highly efficient degradation of PFAS.
- 5 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (2) , 1732-1744
Photothermal–Photocatalytic Ternary Heterostructure for Solar Light-Driven Highly Efficient Degradation of Antimicrobial Agents and Inactivation of Superbugs
A significant proportion of antimicrobial agents, such as different antibiotics discharged into the environment via human and animal waste, poses significant problems for ecological balance and human health. Moreover, widespread overuse and misuse of antibiotics have led to antibiotic-resistant bacteria (superbugs), which is one of the biggest global health problems in the 21st century. Since the utilization of solar energy, which is an abundant and natural resource for the photocatalytic system, we report the design of a photothermal-photocatalytic dual-functional light absorber-based ternary heterostructure using plasmonic gold nanoparticle (AuNP)-anchored WO3 nanoplatelet (WO3 NPL)-decorated reduced graphene oxide (r-GO) (AuNP/WO3 NPL/r-GO), which exhibits strong absorption between 400 and 900 nm regions and has the capability for the sunlight-driven 100% degradation of doxycycline antibiotics. Herein, we show that due to the excellent photothermal performance of AuNP and r-GO in the heterostructure, the local temperature increased under 785 NIR nm light irradiation, which boosted the photocatalytic degradation reaction kinetics for doxycycline antibiotics via enhancing the transfer of "hot carriers" and the formation of reactive oxygen species (ROS). Furthermore, experimental data indicate that by integrating photothermal-photocatalytic materials, sunlight can be used for 100% doxycycline antibiotic degradation after 80 min of light irradiation. Moreover, we demonstrate that the ternary heterostructure can be used for sunlight-based 100% inactivation of carbapenem-resistant Enterobacteriaceae Escherichia coli (CRE E. coli) and methicillin-resistant Staphylococcus aureus (MRSA) superbugs by just exposing them to light for 60 min. This study sheds light on the construction of photothermally assisted photocatalytic ternary heterostructures for high-efficiency sunlight-driven degradation of antibiotics and superbugs.
- 5 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (2) , 1732-1744
Photothermal–Photocatalytic Ternary Heterostructure for Solar Light-Driven Highly Efficient Degradation of Antimicrobial Agents and Inactivation of Superbugs
A significant proportion of antimicrobial agents, such as different antibiotics discharged into the environment via human and animal waste, poses significant problems for ecological balance and human health. Moreover, widespread overuse and misuse of antibiotics have led to antibiotic-resistant bacteria (superbugs), which is one of the biggest global health problems in the 21st century. Since the utilization of solar energy, which is an abundant and natural resource for the photocatalytic system, we report the design of a photothermal-photocatalytic dual-functional light absorber-based ternary heterostructure using plasmonic gold nanoparticle (AuNP)-anchored WO3 nanoplatelet (WO3 NPL)-decorated reduced graphene oxide (r-GO) (AuNP/WO3 NPL/r-GO), which exhibits strong absorption between 400 and 900 nm regions and has the capability for the sunlight-driven 100% degradation of doxycycline antibiotics. Herein, we show that due to the excellent photothermal performance of AuNP and r-GO in the heterostructure, the local temperature increased under 785 NIR nm light irradiation, which boosted the photocatalytic degradation reaction kinetics for doxycycline antibiotics via enhancing the transfer of "hot carriers" and the formation of reactive oxygen species (ROS). Furthermore, experimental data indicate that by integrating photothermal-photocatalytic materials, sunlight can be used for 100% doxycycline antibiotic degradation after 80 min of light irradiation. Moreover, we demonstrate that the ternary heterostructure can be used for sunlight-based 100% inactivation of carbapenem-resistant Enterobacteriaceae Escherichia coli (CRE E. coli) and methicillin-resistant Staphylococcus aureus (MRSA) superbugs by just exposing them to light for 60 min. This study sheds light on the construction of photothermally assisted photocatalytic ternary heterostructures for high-efficiency sunlight-driven degradation of antibiotics and superbugs.
- Open Access
- 8 December 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (50) , 49452-49462
Cooperative Molecular Interaction-Based Highly Efficient Capturing of Ultrashort- and Short-Chain Emerging Per- and Polyfluoroalkyl Substances Using Multifunctional Nanoadsorbents
The short-chain (C4 to C7) and ultrashort-chain (C3 to C2) per- and polyfluoroalkyl substances (PFAS) are bioaccumulative, carcinogenic to humans, and harder to remove using current technologies, which are often detected in drinking and environmental water samples. Herein, we report the development of nonafluorobutanesulfonyl (NFBS) and polyethylene-imine (PEI)-conjugated Fe3O4 magnetic nanoparticle-based magnetic nanoadsorbents and demonstrated that the novel adsorbent has the capability for highly efficient removal of six different short- and ultrashort-chain PFAS from drinking and environmental water samples. Reported experimental data indicates that by capitalizing the cooperative hydrophobic, fluorophilic, and electrostatic interaction processes, NFBS-PEI-conjugated magnetic nanoadsorbents can remove ∼100% short-chain perfluorobutanesulfonic acid within 30 min from the water sample with a maximum absorption capacity q m of ∼234 mg g-1. Furthermore, to show how cooperative interactions are necessary for effective capturing of ultrashort and short PFAS, a comparative study has been performed using PEI-attached magnetic nanoadsorbents without NFBS and acid-functionalized magnetic nanoadsorbents without PEI and NFBS. Reported data show that the ultrashort-chain perfluoropropanesulfonic acid capture efficiency is the highest for the NFBS-PEI-attached nanoadsorbent (q m ∼ 187 mg g-1) in comparison to the PEI-attached nanoadsorbent (q m ∼ 119 mg g-1) or carboxylic acid-attached nanoadsorbent (q m ∼ 52 mg g-1). In addition, the role of cooperative molecular interactions in highly efficient removal of ultrashort-chain PFAS has been analyzed in detail. Moreover, reported data demonstrate that nanoadsorbents can be used for effective removal of short-chain PFAS (<92%) and ultrashort-chain PFAS (<70%) simultaneously from reservoir, lake, tape, and river water samples within 30 min, which shows the potential of nanoadsorbents for real-life PFAS remediation.
- 8 December 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (50) , 49452-49462
Open AccessCooperative Molecular Interaction-Based Highly Efficient Capturing of Ultrashort- and Short-Chain Emerging Per- and Polyfluoroalkyl Substances Using Multifunctional Nanoadsorbents
The short-chain (C4 to C7) and ultrashort-chain (C3 to C2) per- and polyfluoroalkyl substances (PFAS) are bioaccumulative, carcinogenic to humans, and harder to remove using current technologies, which are often detected in drinking and environmental water samples. Herein, we report the development of nonafluorobutanesulfonyl (NFBS) and polyethylene-imine (PEI)-conjugated Fe3O4 magnetic nanoparticle-based magnetic nanoadsorbents and demonstrated that the novel adsorbent has the capability for highly efficient removal of six different short- and ultrashort-chain PFAS from drinking and environmental water samples. Reported experimental data indicates that by capitalizing the cooperative hydrophobic, fluorophilic, and electrostatic interaction processes, NFBS-PEI-conjugated magnetic nanoadsorbents can remove ∼100% short-chain perfluorobutanesulfonic acid within 30 min from the water sample with a maximum absorption capacity q m of ∼234 mg g-1. Furthermore, to show how cooperative interactions are necessary for effective capturing of ultrashort and short PFAS, a comparative study has been performed using PEI-attached magnetic nanoadsorbents without NFBS and acid-functionalized magnetic nanoadsorbents without PEI and NFBS. Reported data show that the ultrashort-chain perfluoropropanesulfonic acid capture efficiency is the highest for the NFBS-PEI-attached nanoadsorbent (q m ∼ 187 mg g-1) in comparison to the PEI-attached nanoadsorbent (q m ∼ 119 mg g-1) or carboxylic acid-attached nanoadsorbent (q m ∼ 52 mg g-1). In addition, the role of cooperative molecular interactions in highly efficient removal of ultrashort-chain PFAS has been analyzed in detail. Moreover, reported data demonstrate that nanoadsorbents can be used for effective removal of short-chain PFAS (<92%) and ultrashort-chain PFAS (<70%) simultaneously from reservoir, lake, tape, and river water samples within 30 min, which shows the potential of nanoadsorbents for real-life PFAS remediation.