MAMuhammad Adnan

Muhammad Adnan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Muhammad Adnan has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Energy-Efficient Optimization-Based and Low-Complexity Learning-Oriented Hybrid Broadband Millimeter-Wave Precoding Designs for Maximizing Spectral Efficiency in Multirelay MIMO–OFDM Networks

    by Hafiz Muhammad Tahir Mustafa, Jung-In Baik, Yeon-Kug Moon, Hyoung-Kyu Song, Muhammad Adnan

    This work introduces an optimization-based hybrid (analog-to-digital) wideband millimeter-wave (mm-wave) transceiver design in single-user multirelay (SU-MR) multi-input–multi-output (MIMO) systems to maximize spectral efficiency. The proposed hybrid precoding model considers finite-resolution phase shifters for analog beamformers to make the system physically realizable. Moreover, this design takes fully connected (FC) and partially connected (PC) architectures into account in relay hybrid filters. The joint optimization of coupled radio frequency (RF) and baseband processors, along with the imposed nonconvex constraints by the phase-only beamformers, results in a mathematically intractable problem. To address this, the proposed strategy decomposes optimization into subproblems, focusing on maximizing the equivalent channels of target signals and minimizing interference. This hybrid precoding is computationally inefficient and contingent on the quality of channel state information (CSI) compared with learning-oriented approaches. Therefore, we exploit the low-complexity extreme learning machine (ELM)-based framework for jointly optimizing the hybrid processing components. This work also investigates a computationally efficient learning mechanism that integrates the concept of autoencoder (AE) with the ELM-based neural network (i.e., ELM-AE) to jointly estimate hybrid beamformers. Additionally, this article incorporates the idea of a deep convolutional neural network (DCNN) to jointly derive the RF and baseband processing units for comparative analysis. Extensive numerical results, considering changes in system parameters and channel imperfections, validate the effectiveness of the proposed algorithms for mm-wave MIMO orthogonal frequency-division multiplexing (MIMO–OFDM) networks.


  • Top Cited Papers
    Open Access

    Uncertainty-aware diabetic retinopathy detection using deep learning enhanced by Bayesian approaches

    by Mohsin Akram, Muhammad Adnan, Syed Farooq Ali, Jameel Ahmad, Amr Yousef, Tagrid Abdullah N. Alshalali, Zaffar Ahmed Shaikh

    Deep learning-based medical image analysis has shown strong potential in disease categorization, segmentation, detection, and even prediction. However, in high-stakes and complex domains like healthcare, the opaque nature of these models makes it challenging to trust predictions, particularly in uncertain cases. This sort of uncertainty can be crucial in medical image analysis; diabetic retinopathy is an example where even slight errors without an indication of confidence can have adverse impacts. Traditional deep learning models rely on single-point predictions, limiting their ability to provide uncertainty measures essential for robust clinical decision-making. To solve this issue, Bayesian approximation approaches have evolved and are gaining market traction. In this work, we implemented a transfer learning approach, building upon the DenseNet-121 convolutional neural network to detect diabetic retinopathy, followed by Bayesian extensions to the trained model. Bayesian approximation techniques, including Monte Carlo Dropout, Mean Field Variational Inference, and Deterministic Inference, were applied to represent the posterior predictive distribution, allowing us to evaluate uncertainty in model predictions. Our experiments on a combined dataset (APTOS 2019 + DDR) with pre-processed images showed that the Bayesian-augmented DenseNet-121 outperforms state-of-the-art models in test accuracy, achieving 97.68% for the Monte Carlo Dropout model, 94.23% for Mean Field Variational Inference, and 91.44% for the Deterministic model. We also measure how certain the predictions are, using an entropy and a standard deviation metric for each approach. We also evaluated the model using both AUC and accuracy scores at multiple data retention levels. In addition to overall performance boosts, these results highlight that Bayesian deep learning does not only improve classification accuracy in the detection of diabetic retinopathy but also reveals beneficial insights about how uncertainty estimation can help build more trustworthy clinical decision-making solutions.


  • Open Access

    Spectral Efficiency Maximization for Mixed-Structure Cognitive Radio Hybrid Wideband Millimeter-Wave Transceivers in Relay-Assisted Multi-User Multiple-Input Multiple-Output Systems

    by Hafiz Muhammad Tahir Mustafa, Jung-In Baik, Hyoung-Kyu Song, Muhammad Adnan, Waqar Majeed Awan

    This paper proposes a cognitive radio network (CRN)-based hybrid wideband precoding for maximizing spectral efficiency in millimeter-wave relay-assisted multi-user (MU) multiple-input multiple-output (MIMO) systems. The underlying problem is NP-hard and non-convex due to the joint optimization of hybrid processing components and the constant amplitude constraint imposed by the analog beamformer in the radio frequency (RF) domain. Furthermore, the analog beamforming solution common to all sub-carriers adds another layer of design complexity. Two hybrid beamforming architectures, i.e., mixed and fully connected ones, are taken into account to tackle this problem, considering the decode-and-forward (DF) relay node. To reduce the complexity of the original optimization problem, an attempt is made to decompose it into sub-problems. Leveraging this, each sub-problem is addressed by following a decoupled design methodology. The phase-only beamforming solution is derived to maximize the sum of spectral efficiency, while digital baseband processing components are designed to keep interference within a predefined limit. Computer simulations are conducted by changing system parameters under different accuracy levels of channel-state information (CSI), and the obtained results demonstrate the effectiveness of the proposed technique. Additionally, the mixed structure shows better energy efficiency performance compared to its counterparts and outperforms benchmarks.


  • Open Access

    Hybrid Wideband Beamforming for Sum Spectral Efficiency Maximization in Millimeter-Wave Relay-Assisted Multiuser MIMO Cognitive Radio Networks

    by Zunira Abbasi, Hafiz Muhammad Tahir Mustafa, Jung-In Baik, Muhammad Adnan, Waqar Majeed Awan, Hyoung-Kyu Song

    Relay-assisted hybrid beamforming plays an inevitable role in enhancing network coverage, transmission range, and spectral efficiency while simultaneously reducing hardware cost, power consumption, and hardware implementation complexity. This study investigates a cognitive radio network (CRN)-based hybrid wideband transceiver for millimeter-wave (mm-wave) decode-and-forward (DF) relay-assisted multiuser (MU) multiple-input multiple-output (MIMO) systems. It is worth mentioning that the underlying problem has not been addressed so far, which is a real motivation behind the proposed algorithm. The joint optimization of hybrid processing components and the constant amplitude constraints imposed by the analog beamforming solution make this problem non-convex and NP-hard. Furthermore, the analog beamformer common to all sub-carriers is another challenging aspect of the underlying problem. To derive the frequency-flat analog processing component in the radio frequency (RF) domain and frequency-dependent baseband processing matrices in the baseband domain, the original complicated problem is reformulated as two single-hop sum-rate maximization sub-problems. Taking advantage of this decomposition, the sum spectral efficiency is maximized through RF precoding and combining. On the other hand, the impact of interference among transmitted data streams and inter-user interference (IUI) is minimized via baseband processing matrices. Finally, computer simulations are conducted by changing system parameters, considering both perfect and imperfect channel state information (CSI). Simulation results demonstrate that the proposed algorithm achieves performance close to full-complexity precoding and outperforms other well-known hybrid beamforming techniques. Specifically, more than 95% efficiency is achieved with perfect CSI, and more than 90% efficiency is attained under the assumption of 30% error in the estimated channels.


  • Open Access

    Multi-Stream Deep Convolution Neural Network With Ensemble Learning for Facial Micro-Expression Recognition

    by Gulnaz Perveen, Syed Farooq Ali, Jameel Ahmad, Sana Shahab, Muhammad Adnan, Mohd Anjum, Ikramullah Khosa

    Micro-expression recognition has gained much attention in research communities. Among its proposed solutions, deep learning approaches have shown promising results over the past few years. In this paper, we propose a multi-stream deep convolution neural network with ensemble classification for facial micro-expression recognition. The multi-stream network uses the deep features of a residual network, densely connected convolutional network, and visual geometry group. The features of these aforementioned architectures are extracted from their pooling layers and become very resource-intensive due to their high dimensions. The principal component analysis is applied to these features for their dimensionality reduction. Stacking, an ensemble classification technique, is performed on these deep features with three base learners (random tree, J48, random forest) and a meta learner (random forest). Experiments were performed using publicly available datasets, namely: CASME-II, CASME2, SMIC, and SAMM. The proposed approach (PA) is compared with twelve approaches. The results show that the PA outperformed the existing approaches in terms of accuracy and time efficiency.


  • Open Access

    A New Noise Shaping Approach for Sigma-Delta Modulators Using Two-Stage Feed-Forward Delays and Hybrid MASH-EFM

    by Khalid Ijaz, Muhammad Adnan, Waqas Tariq Toor, Muhammad Asim Butt, Muhammad Idrees, Usman Ali, Izaz Hassan, Yazeed Yasin Ghadi, Fuad A. Awwad, Mohamed R. Abonazel, et al.

    Sigma-delta modulators use a noise-shaping technique to curtail the noise power in the band of interest during digital-to-analog conversion. Error feedback modulator employs an efficient noise transfer function for time varying inputs than any other sigma-delta modulators. However, the efficiency of the conventional noise transfer function degrades and the quantizer saturation issue provokes when the input signal reaches to full scale. This work proposes a new noise transfer function which is a combination of transfer functions of two-stage Feed-forward delays and a novel Hybrid multi-stage noise shaping-error feedback sigma-delta modulator. The noise transfer function of two-stage Feed-forward delays mitigates the concern of quantizer saturation. The noise transfer function offered by the Hybrid multi-stage noise shaping-error feedback architecture provides sustainable solutions to limit cycles and idle tones. The simulation concludes that the proposed noise-shaping approach obtains comparatively high signal-to-quantization noise ratio than the conventional error feedback modulators. Other performance parameters like spurious-free dynamic range, effective number of bits and signal-to-noise plus distortion ratio are also significantly improved.


  • Open Access

    A Novel Temporal Feature Selection Based LSTM Model for Electrical Short-Term Load Forecasting

    by Khalid Ijaz, Zawar Hussain, Jameel Ahmad, Syed Farooq Ali, Muhammad Adnan, Ikramullah Khosa

    An accurate electrical Short-term Load Forecasting (STLF) is an eminent factor in the power generation, electrical load dispatching and energy planning for the power supply companies, specifically in developing countries. This paper proposes a novel temporal feature selection-based Long Short-term Memory (LSTM) model developed by the combination of standard Artificial Neural Network (ANN) layer and LSTM for electrical short term load forecasting. The LSTM model has excellent capability of predicting the stochastic nature of an hour ahead electrical loads. The standard ANN layer consisting 11 neurons is used as an input to LSTM cells. Such a combination of ANN layer with LSTM was never proposed before. The proposed model accommodates variations in weather as well as temporal inputs like humidity, holidays, and date-time features in the hourly load data of the power supply company situated in Johor, Malaysia. This paper gives the insights of hyper parameter tuning to capture the more generalized electrical load patterns in the dataset without compromising the time complexity of the proposed model. The proposed approach was compared with five existing approaches, namely: ANN, LSTM model 1, LSTM model 2, LSTM model 3 and Convolutional Neural Network-LSTM (CNN-LSTM) using hourly load dataset of Johor. The experimental results demonstrate that the proposed approach outperformed the existing approaches in terms of root mean square error, mean absolute percentage error and Diebold-Mariano statistical inference test within 95% confidence interval.


  • Open Access

    Wind-to-Hydrogen Production Potential for Selected Sites in Pakistan

    by Jameel Ahmad, Muhammad Imran, Syed Farooq Ali, Muhammad Adnan, Syed Rehan Ashraf, Zawar Hussain, Muhammad Shoaib

    This paper provides a comprehensive assessment of wind energy potential for Hydrogen production under local conditions of Pakistan from the design, development and practical implementation perspectives. Simulations were performed for three sites—Bahawalpur, Sanghar and Gwadar using actual wind speed site data, recorded between 2016 and 2018, at intervals of 10 minute. For the selected sites, wind resource assessment was performed using the Weibull distribution function parameters, energy and wind-power density calculations at hub heights of 20m, 40m, 60m and 80m of the wind turbines. It was observed that Sanghar is the most suitable site for wind-to-Hydrogen production potential with power and energy density of $305.86~W/m^{2}$ and $2665.81~kWh/m^{2}$ , respectively. From the implementation perspective, the Nordex N90/2500 wind turbine at an 80m hub height was found to be beneficial for Sanghar with a cost of energy of 35.21 $\$ $ /MWh (0.035 $\$ $ /kWh). The cost of Hydrogen using an electrolyzer for 7-year long-term investment was 2.29 k $\$ $ /ton using Nordex N90/2500 turbine. Based on the available power density and land area, a general scheme for production of Hydrogen using electrolysis can be implemented with possibility of installation and commissioning of wind farms.


  • On the frontiers of pose invariant face recognition: a review

    by Sheikh Bilal Ahmed, Syed Farooq Ali, Jameel Ahmad, Muhammad Adnan, Muhammad Moazam Fraz