MZMingjian Zhang

Mingjian Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mingjian Zhang has a total of 295 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Na–Fe–P Stoichiometry‐Driven Heterostructure Design With a P 2 O 7 ‐Rich Buffering Phase for Stable NASICON‐Type Sodium‐Ion Cathodes

    by Ao Chen, Zongyu Guan, Yifeng Yuan, Yuansheng Lin, Mingxiang Deng, Yang Gu, Aoci Yang, Ziyan Wu, Siteng Zhou, Meng Li, et al.

    Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 (NFPP) is a NASICON‐type iron‐based polyanionic cathode that is attracting increasing interest for sodium‐ion batteries because of its low cost, robust framework, three‐dimensional Na + transport channels, and high operating voltage. However, its electrochemical performance is severely compromised by the formation of electrochemically inactive maricite NaFePO 4 (m‐NFP) during synthesis. Here, we induced the in situ formation of a Na 3.12 Fe 2.44 (P 2 O 7 ) 2 (N 3.12 F 2.44 PO) phase within NFPP through stoichiometry engineering to construct a heterogeneous composite. This strategy effectively suppresses m‐NFP formation and improves reversible capacity, while retaining the intrinsic cost advantage of NFPP without incorporating additional elements or extra synthetic steps. The optimized NFPP/N 3.12 F 2.44 PO heterostructure exhibits remarkable structural robustness, with the P 2 O 7 ‐rich N 3.12 F 2.44 PO phase acting as a structural buffer to mitigate lattice deformation, enabling an ultralong cycling life of 10,000 cycles at 40C (1C = 129 mA g −1 ) with 83.6% capacity retention. By mapping phase evolution across a controlled Na‐Fe‐P compositional window, we further reveal that Na and Fe contents govern the formation propensity of the N 3.12 F 2.44 PO phase, offering a viable route to heterogeneous NASICON‐type cathodes with exceptional cycling durability for sodium‐ion batteries.

  • Na–Fe–P Stoichiometry‐Driven Heterostructure Design With a P 2 O 7 ‐Rich Buffering Phase for Stable NASICON‐Type Sodium‐Ion Cathodes

    by Ao Chen, Zongyu Guan, Yifeng Yuan, Yuansheng Lin, Mingxiang Deng, Yang Gu, Aoci Yang, Ziyan Wu, Siteng Zhou, Meng Li, et al.

    Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 (NFPP) is a NASICON‐type iron‐based polyanionic cathode that is attracting increasing interest for sodium‐ion batteries because of its low cost, robust framework, three‐dimensional Na + transport channels, and high operating voltage. However, its electrochemical performance is severely compromised by the formation of electrochemically inactive maricite NaFePO 4 (m‐NFP) during synthesis. Here, we induced the in situ formation of a Na 3.12 Fe 2.44 (P 2 O 7 ) 2 (N 3.12 F 2.44 PO) phase within NFPP through stoichiometry engineering to construct a heterogeneous composite. This strategy effectively suppresses m‐NFP formation and improves reversible capacity, while retaining the intrinsic cost advantage of NFPP without incorporating additional elements or extra synthetic steps. The optimized NFPP/N 3.12 F 2.44 PO heterostructure exhibits remarkable structural robustness, with the P 2 O 7 ‐rich N 3.12 F 2.44 PO phase acting as a structural buffer to mitigate lattice deformation, enabling an ultralong cycling life of 10,000 cycles at 40C (1C = 129 mA g −1 ) with 83.6% capacity retention. By mapping phase evolution across a controlled Na‐Fe‐P compositional window, we further reveal that Na and Fe contents govern the formation propensity of the N 3.12 F 2.44 PO phase, offering a viable route to heterogeneous NASICON‐type cathodes with exceptional cycling durability for sodium‐ion batteries.

  • Open Access

    Li–Mn–O Cathode Materials for Li‐Ion Batteries: Synthesis, Structure Instability, Characterizations, and Stabilization Strategies

    by Wenshan Ye, Zhongxu Liu, Ze‐Bin Pan, Jun‐Ke Liu, Chuan‐Wei Wang, Mingjian Zhang, Yue‐Feng Xu, Xianhu Sun, Zu‐Wei Yin, Yao Zhou, et al.

    Li–Mn–O materials are regarded as highly promising cathodes candidates for large‐scale energy storage applications owing to the abundance, low cost, and low toxicity of manganese. Although existing reviews have explored certain Li–Mn–O cathode systems, such as LiMn 2 O 4 and lithium‐rich Mn‐based oxides, a systematic analysis comprehensively correlating the structural characteristics, fundamental failure mechanisms, and corresponding modification strategies across different Li–Mn–O systems remains lacking. Few reviews have fully integrated multiscale failure mechanisms spanning from atomic‐scale distortions to electrode‐level performance degradation, along with synergistic mitigation strategies, which have yet to be systematically elucidated. Therefore, this review aims to bridge these research gaps by systematically integrating and critically evaluating recent groundbreaking advances in the mechanistic understanding and performance optimization of Li–Mn–O materials, covering the structural fundamentals, available synthesis methods, intrinsic mechanisms of structural instability and characterizations, and corresponding strategies for performance enhancement of Li–Mn–O materials. Furthermore, we propose perspectives on future research directions for high‐stability Mn‐based cathode materials, offering theoretical support for next‐generation lithium battery technologies.


  • Stabilizing Dual Interphases for High-Voltage Li Metal Batteries via Trace Dinitrile-Ether Additives in Localized High-Concentration Electrolytes

    by Hengyang Zhu, Chenyu Wang, Yuansheng Lin, Xiangxin Zhang, Baisheng Sa, Yuanqiang Chen, Lunhui Guan, Yining Zhang, Mingjian Zhang, Yongchuan Liu


  • Simultaneous regulation of surface-bulk microstructure to achieve long-term fast-charge olivine-type cathodes

    by Yuansheng Lin, Enze Li, Zu-Wei Yin, Chenyu Wang, Songxin Lu, Hao Wang, Honghao Wang, Yuncong Bai, Ziyan Wu, Zhaowei Lin, et al.


  • Deciphering Metastable Structure Evolution in Voltage Hysteresis of Lithium-Rich Cathodes

    by Haoyu Xue, Wenguang Zhao, Minzhi Zhan, Dong Zhou, Nian Zhang, Zhefeng Chen, Rui Qi, Mihai Chu, Shunning Li, Jun Wang, et al.

    Voltage hysteresis, as one of the main concerns in lithium-rich oxides (LROs), significantly deteriorates the energy conversion efficiency and hinders its application in high-energy-density Li-ion batteries. Nevertheless, the structural origin of voltage hysteresis has still not been clarified. Here we reveal the thermodynamically metastable structure evolution, particularly negative thermal expansion and correlated transition-metal (TM) octahedral (TMO6) distortion release, during thermally driven voltage hysteresis recovery in LROs. Moreover, whole exothermic structure evolution and related voltage recovery are linked: (1) abnormal negative thermal expansion below 200 °C due to the relief of octahedral distortion, which leads to a voltage recovery by 0.26 V; (2) reconstruction of Li@Mn6 superstructure units due to Li-vacancy-assisted TM migration at 300 °C, which further recovers the voltage by 0.16 V and the oxygen plateau. Our work provides a more elaborate picture of the structure-voltage correlation in anionic-redox systems and highlights that these two structural variations form a metastable phase, serving as a solid base after the first cycle for subsequent cycling in LROs.


  • Top Cited Papers
    Open Access

    Spatiotemporal alignment of hole transfer and water oxidation for highly efficient photocatalytic water splitting

    by Yaling Luo, Ruotian Chen, Thomas Dittrich, Pan Gao, Chenwei Ni, Jie Zhang, Yue Zhao, Deyun Zhang, Na Ta, Mingrun Li, et al.

    Photocatalytic overall water splitting remains limited by inefficient charge separation and utilization in reactions. Al-doped SrTiO3 exhibiting near-100% apparent quantum efficiency for overall water splitting indicates nearly complete charge separation and surface catalytic efficiency. Although Al doping has been assumed to enhance charge separation and transfer, the exact role of Al is still unclear. Here, using spatiotemporal surface photovoltage imaging, we show that a gradient Al doping in Al-doped SrTiO3 generates a built-in electric field that drives photogenerated holes from the bulk toward surface trap sites in the form of hydroxylated Al-O-Ti, prolonging their lifetime from ~100 ns to 10 ms. Spectroscopic analyses reveal that these hydroxylated Al sites serve as key centers for water adsorption, facilitating water oxidation. These findings underscore the pivotal role of Al in the spatiotemporal alignment of hole transfer and surface catalytic water oxidation, enabling high-efficiency photocatalysis in overall water splitting.


  • Tandem Topotactic Reactions for Low-Temperature Synthesis of Ni-Rich Layered Oxide Cathodes without Anti-site Defect

    by Honghao Wang, Chenxi Li, Zuoguo Xiao, Haoyu Xue, Zhao-Hui Dong, Ke Yang, Nian Zhang, Yuansheng Lin, Yingbo Deng, Zhaowei Lin, et al.

    Ni-rich layered oxides (LiNixCoyMnzO2, x > 0.6) have garnered significant attention in electric transportation due to the high energy density (>700 Wh/kg). Traditional synthesis of Ni-rich cathodes typically involves high-temperature (>700 °C) long-duration (∼10 h) sintering procedures, which not only increase energy consumption but also present challenges in precisely controlling the synthesis conditions. Here we designed a two-step tandem topotactic phase-transition route that allows low-temperature synthesis of Ni-rich cathodes. Temperature-resolved X-ray scattering techniques combined with ex situ spectroscopy experiments substantiated that the layered hydroxide precursor first transformed to a layered oxyhydroxide intermediate through a topotactic deprotonation reaction, which was then converted to Ni-rich layered oxide cathode by a rapid topotactic lithiation. Radically distinguished from the destruction-reconstruction process of layered structures in the conventional synthesis route, the layered framework was maintained throughout the whole topotactic route, lowering the energy barrier of synthetic kinetics and thus enabling the successful preparation of Ni-rich cathodes at low temperature (150 °C), which brings an unprecedented reduction of energy consumption (by 57%) and considerable cost-savings. Furthermore, Ni-rich cathodes synthesized through the topotactic route exhibited comparable electrochemical activity and even better cycling stability (∼80% after 500 cycles) than those synthesized through conventional routes. This work presents an enlightening methodology of Ni-rich layered cathode synthesis, laying a substantial foundation for cost-effective and eco-friendly production of high-performance cathode materials on an industrial scale.


  • Stabilizing Lattice Oxygen via Interfacial B–O Complexing for a 4.6 V LiCoO2 Cathode

    by Jimin Qiu, Yuchen Ji, Wenfang Li, Yuhang Li, Wenguang Zhao, Yunxing Zuo, Weiyuan Huang, Chen Zhu, Mingjian Zhang, Guorui Zheng, et al.

    Lithium cobalt oxide (LiCoO2) cathodes suffer serious structure instability when charged to high voltage (>4.5 V), including H1-3 phase transition, cobalt dissolution, and interfacial side reactions, which are closely related to the instability of surface lattice oxygen. Herein, an interfacial B-O complexing strategy was proposed to stabilize the surface lattice oxygen of LiCoO2 at 4.6 V, through the preferential coordination between derived products of the tris(pentafluorophenyl)borane electrolyte additive and LiCoO2. Combining a series of in situ and ex situ characterization methods with temporal and spatial resolution, it was revealed that the emergence of peroxy-like species (O22-) at high potentials is one of the origins of the instability of LiCoO2, which can be well inhibited thanks to interfacial B-O complexing. Thus, oxygen loss and interfacial side reactions can be drastically retarded, which consequently provides a more stable chemical environment for Co element, avoiding the dissolution and valence reduction of Co. Owing to the well-anchored Co and O elements, undesirable phase transition and local coordination structure change are suppressed, hence improving the capacity retention and rate performance of LiCoO2 at 4.6 V. This study provides an interfacial complexing strategy to stabilize the high-voltage LiCoO2 cathode.


  • Open Access

    Correction: Multi-angle tracking synthetic kinetics of phase evolution in Li-rich Mn-based cathodes

    by Shenyang Xu, Zhefeng Chen, Wenguang Zhao, Wenju Ren, Chenxin Hou, Jiajie Liu, Wu Wang, Chong Yin, Xinghua Tan, Xiaobing Lou, et al.

    Correction for ‘Multi-angle tracking synthetic kinetics of phase evolution in Li-rich Mn-based cathodes’ by Shenyang Xu et al., Energy Environ. Sci., 2024, https://doi.org/10.1039/d3ee04199a.