Ya Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ya Sun has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Chunlei Wang
College of Chemistry and Environmental Engineering, Wuhan Polytechnic University, Wuhan 430023, China
4 shared publications - Juntao Yan
College of Chemistry and Environmental Engineering, Wuhan Polytechnic University, Wuhan 430023, China
4 shared publications - Jinhong Liu
Hubei Three Gorges Laboratory, Yichang 443000, China
2 shared publications - Sunhua Deng
College of Construction Engineering, Jilin University, Changchun 130021, China
2 shared publications - Bo Chai
College of Chemistry and Environmental Engineering, Wuhan Polytechnic University, Wuhan 430023, China
1 shared publication - Chenghao Zhang
College of Chemistry and Environmental Engineering, Wuhan Polytechnic University, Wuhan 430023, China
1 shared publication
Latest Publications
- Open Access
Impact of Activation Conditions on the Electrochemical Performance of Rice Straw Biochar for Supercapacitor Electrodes
Biochar, derived from agricultural waste, has gained significant attention as a sustainable material for energy storage applications due to its high surface area, tunable porosity, and environmental benefits. This study investigates the electrochemical performance of rice straw biochar (RSBC) as an electrode material, with a focus on the effects of activation temperature, activation ratio, and activation time. Among the prepared samples, RSBC-2, activated at 800 °C with a 1:2 KOH ratio for 0.5 h, exhibited the best electrochemical performance. Characterization of RSBC and RSBC-2 showed significant improvements in surface area and pore structure. Specifically, the BET surface area of RSBC-2 increased to 939.40 m2 g−1, with a reduced average pore size of 2.27 nm. Electrochemical testing revealed that RSBC-2 achieved specific capacitances of 296, 281, 272, 260, and 240 F g−1 at current densities of 0.2, 0.5, 1, 2, and 5 A g−1, respectively, with a capacity retention rate of 81%. The improved electrochemical performance of RSBC-2 is attributed to its larger surface area and enhanced pore structure, which facilitate better charge storage and overall electrochemical behavior, making it a promising candidate for energy storage applications.
Open AccessImpact of Activation Conditions on the Electrochemical Performance of Rice Straw Biochar for Supercapacitor Electrodes
Biochar, derived from agricultural waste, has gained significant attention as a sustainable material for energy storage applications due to its high surface area, tunable porosity, and environmental benefits. This study investigates the electrochemical performance of rice straw biochar (RSBC) as an electrode material, with a focus on the effects of activation temperature, activation ratio, and activation time. Among the prepared samples, RSBC-2, activated at 800 °C with a 1:2 KOH ratio for 0.5 h, exhibited the best electrochemical performance. Characterization of RSBC and RSBC-2 showed significant improvements in surface area and pore structure. Specifically, the BET surface area of RSBC-2 increased to 939.40 m2 g−1, with a reduced average pore size of 2.27 nm. Electrochemical testing revealed that RSBC-2 achieved specific capacitances of 296, 281, 272, 260, and 240 F g−1 at current densities of 0.2, 0.5, 1, 2, and 5 A g−1, respectively, with a capacity retention rate of 81%. The improved electrochemical performance of RSBC-2 is attributed to its larger surface area and enhanced pore structure, which facilitate better charge storage and overall electrochemical behavior, making it a promising candidate for energy storage applications.
- Open Access
Flexible PAN/P25 Multi-Porous Nanotubular Electrospun Membrane Constructed by a Facile Ethylene Glycol Solvothermal Induction with Excellent Photocatalytic Degradation and Sterilization Performance
A series of flexible polyacrylonitrile/TiO2 (PAN/P25) multi-porous nanotubular membranes were successfully constructed by facile electrospinning combined with an ethylene glycol solvothermal induce strategy. The effects of P25 dosage and solvothermal time on the morphology of samples were systematically investigated, which were characterized in terms of surface morphology, microstructure, specific surface area, thermal analysis, wettability, photoelectrochemical and fluorescence spectra. Rhodamine B (RhB) and Escherichia coli (E. coli) were employed as simulated pollutants to evaluate photocatalytic degradation and antibacterial properties of the PAN/P25-3 multi-porous nanotubular membrane. The PAN/P25-3 membrane exhibited the highest photocatalytic degradation efficiency, with 96.1% degradation of RhB within 120 min under a xenon lamp light source and a photocatalytic inactivation rate of 95.8% for E. coli under 365 nm monochromatic light irradiation. The photocatalytic degradation mechanism of the PAN/P25-3 multi-porous nanotubular membrane for RhB was deduced from the results of 3D-EEM fluorescence and scavenger experiments of reactive species. Additionally, the cyclic photodegradation experiments demonstrated that the PAN/P25-3 membrane maintained excellent stability and photocatalytic performance after multiple degradation cycles, confirming its potential for sustainable wastewater treatment applications.
Open AccessFlexible PAN/P25 Multi-Porous Nanotubular Electrospun Membrane Constructed by a Facile Ethylene Glycol Solvothermal Induction with Excellent Photocatalytic Degradation and Sterilization Performance
A series of flexible polyacrylonitrile/TiO2 (PAN/P25) multi-porous nanotubular membranes were successfully constructed by facile electrospinning combined with an ethylene glycol solvothermal induce strategy. The effects of P25 dosage and solvothermal time on the morphology of samples were systematically investigated, which were characterized in terms of surface morphology, microstructure, specific surface area, thermal analysis, wettability, photoelectrochemical and fluorescence spectra. Rhodamine B (RhB) and Escherichia coli (E. coli) were employed as simulated pollutants to evaluate photocatalytic degradation and antibacterial properties of the PAN/P25-3 multi-porous nanotubular membrane. The PAN/P25-3 membrane exhibited the highest photocatalytic degradation efficiency, with 96.1% degradation of RhB within 120 min under a xenon lamp light source and a photocatalytic inactivation rate of 95.8% for E. coli under 365 nm monochromatic light irradiation. The photocatalytic degradation mechanism of the PAN/P25-3 multi-porous nanotubular membrane for RhB was deduced from the results of 3D-EEM fluorescence and scavenger experiments of reactive species. Additionally, the cyclic photodegradation experiments demonstrated that the PAN/P25-3 membrane maintained excellent stability and photocatalytic performance after multiple degradation cycles, confirming its potential for sustainable wastewater treatment applications.
- Open Access
- 20 December 2023
- Published by MDPI AG in Nanomaterials
- Vol. 14 (1) , 17
Effects of Synthesis Conditions of Na0.44MnO2 Precursor on the Electrochemical Performance of Reduced Li2MnO3 Cathode Materials for Lithium-Ion Batteries
Li2MnO3 nanobelts have been synthesized via the molten salt method that used the Na0.44MnO2 nanobelts as both the manganese source and precursor template in LiNO3-LiCl eutectic molten salt. The electrochemical properties of Li2MnO3 reduced via a low-temperature reduction process as cathode materials for lithium-ion batteries have been measured and compared. Particularly investigated in this work are the effects of the synthesis conditions, such as reaction temperature, molten salt contents, and reaction time on the morphology and particle size of the synthesized Na0.44MnO2 precursor. Through repeated synthesis characterizations of the Na0.44MnO2 precursor, and comparing the electrochemical properties of the reduced Li2MnO3 nanobelts, the optimum conditions for the best electrochemical performance of the reduced Li2MnO3 are determined to be a molten salt reaction temperature of 850 °C and a molten salt amount of 25 g. When charge–discharged at 0.1 C (1 C = 200 mAh g−1) with a voltage window between 2.0 and 4.8 V, the reduced Li2MnO3 synthesized with reaction temperature of Na0.44MnO2 precursor at 850 °C and molten salt amounts of 25 g exhibits the best rate performance and cycling performance. This work develops a new strategy to prepare manganese-based cathode materials with special morphology.
- 20 December 2023
- Published by MDPI AG in Nanomaterials
- Vol. 14 (1) , 17
Open AccessEffects of Synthesis Conditions of Na0.44MnO2 Precursor on the Electrochemical Performance of Reduced Li2MnO3 Cathode Materials for Lithium-Ion Batteries
Li2MnO3 nanobelts have been synthesized via the molten salt method that used the Na0.44MnO2 nanobelts as both the manganese source and precursor template in LiNO3-LiCl eutectic molten salt. The electrochemical properties of Li2MnO3 reduced via a low-temperature reduction process as cathode materials for lithium-ion batteries have been measured and compared. Particularly investigated in this work are the effects of the synthesis conditions, such as reaction temperature, molten salt contents, and reaction time on the morphology and particle size of the synthesized Na0.44MnO2 precursor. Through repeated synthesis characterizations of the Na0.44MnO2 precursor, and comparing the electrochemical properties of the reduced Li2MnO3 nanobelts, the optimum conditions for the best electrochemical performance of the reduced Li2MnO3 are determined to be a molten salt reaction temperature of 850 °C and a molten salt amount of 25 g. When charge–discharged at 0.1 C (1 C = 200 mAh g−1) with a voltage window between 2.0 and 4.8 V, the reduced Li2MnO3 synthesized with reaction temperature of Na0.44MnO2 precursor at 850 °C and molten salt amounts of 25 g exhibits the best rate performance and cycling performance. This work develops a new strategy to prepare manganese-based cathode materials with special morphology.
- Open Access
Investigation on the Preparation of Rice Straw-Derived Cellulose Acetate and Its Spinnability for Electrospinning
Rice straw-derived cellulose (RSC) with purity of 92 wt.% was successfully extracted from rice straw by a novel and facile strategy, which integrated the C2H5OH/H2O autocatalytic process, dilute alkali treatment and H2O2 bleaching process. Influencing factors of the cellulose extraction were systematically examined, such as ethanol concentration, alkali concentration, H2O2 bleaching process and so on; the optimal extraction conditions of cellulose was determined. A series of rice straw-derived cellulose acetate (RSCA) with different degree of substitution (DS) were prepared by the acetylation reaction; the effects of Ac2O/cellulose ratio, reaction temperature and reaction time on the acetylation reaction were investigated. Results of FTIR and XRD analysis demonstrated that highly purified RSC and RSCA were prepared comparing with the commercial cellulose and cellulose acetate. Solubility analysis of RSCA with different DS indicated as-prepared RSCA with DS of 2.82 possessed the best solubleness, which was suitable for electrospinning. Moreover, the flexible RSCA fibrous membrane was easily fabricated by a facile electrospinning method. Our proposed method provided a strategy for realizing the high-value utilization of waste rice straw resource, as prepared RSC and RSCA can be used as chemical raw material, and electrospun RSCA fibrous membrane has various applications in medical materials, food packaging, water purification and so on.
Open AccessInvestigation on the Preparation of Rice Straw-Derived Cellulose Acetate and Its Spinnability for Electrospinning
Rice straw-derived cellulose (RSC) with purity of 92 wt.% was successfully extracted from rice straw by a novel and facile strategy, which integrated the C2H5OH/H2O autocatalytic process, dilute alkali treatment and H2O2 bleaching process. Influencing factors of the cellulose extraction were systematically examined, such as ethanol concentration, alkali concentration, H2O2 bleaching process and so on; the optimal extraction conditions of cellulose was determined. A series of rice straw-derived cellulose acetate (RSCA) with different degree of substitution (DS) were prepared by the acetylation reaction; the effects of Ac2O/cellulose ratio, reaction temperature and reaction time on the acetylation reaction were investigated. Results of FTIR and XRD analysis demonstrated that highly purified RSC and RSCA were prepared comparing with the commercial cellulose and cellulose acetate. Solubility analysis of RSCA with different DS indicated as-prepared RSCA with DS of 2.82 possessed the best solubleness, which was suitable for electrospinning. Moreover, the flexible RSCA fibrous membrane was easily fabricated by a facile electrospinning method. Our proposed method provided a strategy for realizing the high-value utilization of waste rice straw resource, as prepared RSC and RSCA can be used as chemical raw material, and electrospun RSCA fibrous membrane has various applications in medical materials, food packaging, water purification and so on.