Ruixing Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Ruixing Chen has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Wenhua Zhang
Nanjing Forestry University
3 shared publications - Wen Xu
School of Materials Science and Engineering, Southeast University, Nanjing, China
2 shared publications - Chen Yuan
Department of Civil Engineering, Nanjing Forestry University, Nanjing, China
1 shared publication - Deqing Xie
State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science, Nanjing 211103, China
1 shared publication - Guangyan Liu
State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science, Nanjing 211103, China
1 shared publication - Jiale Huang
School of Materials Science and Engineering Southeast University Nanjing China
1 shared publication
Latest Publications
- 1 May 2026
- Published by Ital Publication in Civil Engineering Journal
- Vol. 12 (5) , 2135-2154
Synthesis of Nano-Silicon Hybrid Alkyl Carboxylate to Inhibit Water and Chloride Transport in Concrete
Concrete is vulnerable to water and chloride ingress because of its porous structure and hydrophilic hydration products. To address the poor dispersion, hydration interference, and strength loss often associated with conventional hydrophobic modifiers, this study synthesized a nano-silicon hybrid hydrophobic polymer ester (HPE) based on C12 alkyl carboxylate groups. Unlike conventional nano-silicon or alkyl-based modifiers that mainly rely on pore refinement or surface hydrophobization alone, HPE integrates C12 alkyl carboxylate groups with nano-silicon to construct multiple transport barriers. The effects of HPE dosage on concrete properties and transport-inhibition mechanisms were evaluated using contact angle, water absorption, electrical flux, rapid chloride migration, natural chloride diffusion, compressive strength, SEM, and MIP tests. HPE increased the contact angle from 14° to 78° and reduced long-term water absorption to 28% of the control. The electrical flux and chloride migration coefficient decreased to 48% and 62% of the control, respectively. MIP results showed reductions of 67.9% in the most probable pore diameter and 28.4% in total porosity. The enhanced durability is attributed to hydrophobic film formation, in-situ pore-blocking particles, and nano-silicon-assisted pore densification.
- 1 May 2026
- Published by Ital Publication in Civil Engineering Journal
- Vol. 12 (5) , 2135-2154
Synthesis of Nano-Silicon Hybrid Alkyl Carboxylate to Inhibit Water and Chloride Transport in Concrete
Concrete is vulnerable to water and chloride ingress because of its porous structure and hydrophilic hydration products. To address the poor dispersion, hydration interference, and strength loss often associated with conventional hydrophobic modifiers, this study synthesized a nano-silicon hybrid hydrophobic polymer ester (HPE) based on C12 alkyl carboxylate groups. Unlike conventional nano-silicon or alkyl-based modifiers that mainly rely on pore refinement or surface hydrophobization alone, HPE integrates C12 alkyl carboxylate groups with nano-silicon to construct multiple transport barriers. The effects of HPE dosage on concrete properties and transport-inhibition mechanisms were evaluated using contact angle, water absorption, electrical flux, rapid chloride migration, natural chloride diffusion, compressive strength, SEM, and MIP tests. HPE increased the contact angle from 14° to 78° and reduced long-term water absorption to 28% of the control. The electrical flux and chloride migration coefficient decreased to 48% and 62% of the control, respectively. MIP results showed reductions of 67.9% in the most probable pore diameter and 28.4% in total porosity. The enhanced durability is attributed to hydrophobic film formation, in-situ pore-blocking particles, and nano-silicon-assisted pore densification.
- 3 July 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 490
Deformation and debonding detection of concrete-filled steel tube with expansive agent
- 3 July 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 490
Deformation and debonding detection of concrete-filled steel tube with expansive agent
- 11 April 2024
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 24 (2) , 1-26
Study on preparation and mechanical properties of a new type of high-temperature resistant ultra-high performance concrete
- 11 April 2024
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 24 (2) , 1-26
Study on preparation and mechanical properties of a new type of high-temperature resistant ultra-high performance concrete
- 12 August 2022
- Published by Elsevier in Cement and Concrete Composites
- Vol. 133
Molecular design and experiment of ion transport inhibitors towards concrete sustainability
- 12 August 2022
- Published by Elsevier in Cement and Concrete Composites
- Vol. 133
Molecular design and experiment of ion transport inhibitors towards concrete sustainability
- Open Access
Novel Nano-Precursor Inhibiting Material for Improving Chloride Penetration Resistance of Concrete: Evaluation and Mechanism
Durability improvement is always important for steel–concrete structures exposed to chloride salt environment. The present research investigated the influence of a novel nano-precursor inhibiting material (NPI), organic carboxylic acid ammonium salt, on the mechanical and transport properties of concrete. The NPI caused a slight reduction in the strength of concrete at later ages. NPI significantly decreased water absorption and slowed down the speed of water absorption of concrete. In addition, the NPI decreased the charge passed and the chloride migration coefficient, and the results of the natural chloride diffusion showed that the NPI decreased the chloride concentration and the chloride diffusion coefficient. The NPI effectively improved the resistance of chloride penetration into testing concrete. The improvement in the impermeability of concrete was ascribed to the incorporation with the NPI, which resulted in increasing the contact angle of cement pastes. The contact angle went up from 17.8° to 85.8° for 0% and 1.2% NPI, respectively, and cement pastes became less hydrophilic. Some small pore throats were unconnected. Besides, the NPI also optimized the pore size distribution of hardened cement paste.
Open AccessNovel Nano-Precursor Inhibiting Material for Improving Chloride Penetration Resistance of Concrete: Evaluation and Mechanism
Durability improvement is always important for steel–concrete structures exposed to chloride salt environment. The present research investigated the influence of a novel nano-precursor inhibiting material (NPI), organic carboxylic acid ammonium salt, on the mechanical and transport properties of concrete. The NPI caused a slight reduction in the strength of concrete at later ages. NPI significantly decreased water absorption and slowed down the speed of water absorption of concrete. In addition, the NPI decreased the charge passed and the chloride migration coefficient, and the results of the natural chloride diffusion showed that the NPI decreased the chloride concentration and the chloride diffusion coefficient. The NPI effectively improved the resistance of chloride penetration into testing concrete. The improvement in the impermeability of concrete was ascribed to the incorporation with the NPI, which resulted in increasing the contact angle of cement pastes. The contact angle went up from 17.8° to 85.8° for 0% and 1.2% NPI, respectively, and cement pastes became less hydrophilic. Some small pore throats were unconnected. Besides, the NPI also optimized the pore size distribution of hardened cement paste.