Aidana A. Imasheva
Research Subjects
Aidana A. Imasheva has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Kydyrmolla Akatan
S.Amanzholov East Kazakhstan University, Ust-Kamenogorsk, Kazakhstan
4 shared publications - Sana Kabdrakhmanova
Satbayev University
4 shared publications - Ainur Battalova
National Scintific Laboratory Collective Use, S. Amanzholov East Kazakhstan University, 55 Kazakhstan Str., 070000 Ust-Kamenogorsk, Kazakhstan
3 shared publications - Tilek Kuanyshbekov
Department of Chemistry, Sarsen Amanzholov East Kazakhstan Univeristy, 30th Guards Division Str., 34/1, Ust-Kamenogorsk 070000, Kazakhstan
2 shared publications - Zhanar E. Ibraeva
Scientific Center of Composite Materials; Abai Kazakh National Pedagogical University
2 shared publications - A. Demeukhan
S. Amanzholov East Kazakhstan University, Ust-Kamenogorsk, Kazakhstan
1 shared publication
Latest Publications
- Open Access
- 30 June 2026
- Published by al-Farabi Kazakh National University in International Journal of Biology and Chemistry
- Vol. 19 (1)
Production of sustainable fibrous material from renewable resource
The article comprehensively studies the possibility of obtaining microcrystalline cellulose (MCC) from the husk of sorghum (SbH) (Sorghum Bicolor), an agricultural crop growing in the country. The research comprehensively studied the effective parameters for the production of MCC from SbH, its yield and quality characteristics, as well as physicochemical properties. When using a hydromodule for the extraction of MCC from SbH at a SbH/peroxyacetic acid ratio of 1:16 g/ml, the yield of MCC was high and reached 57.24%. The amount of α-cellulose in the obtained MCC was 61.32%. It has been established that the yield of MCC obtained by this organosolvent oxidation method is 10-25% higher than with the traditional method of alkaline treatment. The obtained MCC can be used as an ingredient in paper and cardboard production, pharmaceuticals, and composite materials. Keywords: Agricultural waste, sorghumbicolor husks, microcrystalline cellulose, organosolvent oxidation, FTIR, crystal structure.
- 30 June 2026
- Published by al-Farabi Kazakh National University in International Journal of Biology and Chemistry
- Vol. 19 (1)
Open AccessProduction of sustainable fibrous material from renewable resource
The article comprehensively studies the possibility of obtaining microcrystalline cellulose (MCC) from the husk of sorghum (SbH) (Sorghum Bicolor), an agricultural crop growing in the country. The research comprehensively studied the effective parameters for the production of MCC from SbH, its yield and quality characteristics, as well as physicochemical properties. When using a hydromodule for the extraction of MCC from SbH at a SbH/peroxyacetic acid ratio of 1:16 g/ml, the yield of MCC was high and reached 57.24%. The amount of α-cellulose in the obtained MCC was 61.32%. It has been established that the yield of MCC obtained by this organosolvent oxidation method is 10-25% higher than with the traditional method of alkaline treatment. The obtained MCC can be used as an ingredient in paper and cardboard production, pharmaceuticals, and composite materials. Keywords: Agricultural waste, sorghumbicolor husks, microcrystalline cellulose, organosolvent oxidation, FTIR, crystal structure.
- Open Access
- 9 October 2024
- Published by Republican State Enterprise "National Nuclear Center of the Republic of Kazakhstan" in NNC RK Bulletin
- No. 3,p. 29-34
OBTAINING CELLULOSE WITH CRYSTALLOGRAPHIC ORIENTATION OF MACROMOLECULES FROM THE HUSK OF A HYBRID SUNFLOWER
Currently, the obtaining and implementation of self-degradable, harmless to the nature of composite materials based on cellulose, allows to solve a number of environmental problems. In this regard, the number of raw materials sources from which cellulose can be obtained increases, the economic and environmental efficiency of its usage and the properties of the obtained cellulose can be studied. In this study, from sunflower husk (SFH)P63LE10 «Pioneer» (USA) using glacial acetic acid and based on acetic acid with 42% concentration peroxyacetic acid, process of obtaining microcrystalline cellulose comparatively was studied. As a result of the study, based on acetic acid with 42% concentration in combination peroxyacetic acid was determined, that yield of obtained MCC (MCC2) was 3,7%, and also quantity of α-cellulose was higher to 3,6%. However, the quality of the residual lignin was 24.02%, and the trace quantity of amorphous structure was determined by IR spectroscopy and XRD diffractometry. On the contrary, the yield and quantity of α-cellulose obtained MMC1 using glacial acetic acid in combination peroxyacetic acid is lower than MMC2, obtained product was different by high degree of purity and content of the ordered part of cellulose with crystallographic orientation of macromolecules.
- 9 October 2024
- Published by Republican State Enterprise "National Nuclear Center of the Republic of Kazakhstan" in NNC RK Bulletin
- No. 3,p. 29-34
Open AccessOBTAINING CELLULOSE WITH CRYSTALLOGRAPHIC ORIENTATION OF MACROMOLECULES FROM THE HUSK OF A HYBRID SUNFLOWER
Currently, the obtaining and implementation of self-degradable, harmless to the nature of composite materials based on cellulose, allows to solve a number of environmental problems. In this regard, the number of raw materials sources from which cellulose can be obtained increases, the economic and environmental efficiency of its usage and the properties of the obtained cellulose can be studied. In this study, from sunflower husk (SFH)P63LE10 «Pioneer» (USA) using glacial acetic acid and based on acetic acid with 42% concentration peroxyacetic acid, process of obtaining microcrystalline cellulose comparatively was studied. As a result of the study, based on acetic acid with 42% concentration in combination peroxyacetic acid was determined, that yield of obtained MCC (MCC2) was 3,7%, and also quantity of α-cellulose was higher to 3,6%. However, the quality of the residual lignin was 24.02%, and the trace quantity of amorphous structure was determined by IR spectroscopy and XRD diffractometry. On the contrary, the yield and quantity of α-cellulose obtained MMC1 using glacial acetic acid in combination peroxyacetic acid is lower than MMC2, obtained product was different by high degree of purity and content of the ordered part of cellulose with crystallographic orientation of macromolecules.
- Open Access
- 22 September 2021
- Published by Center of Physical Chemical Methods of Research and Analysis in Chemical Bulletin of Kazakh National University
- Vol. 102 (3) , 14-20
Synthesis of nanocomposite material through modification of graphene oxide by nanocellulose
Intensive research of nanocomposites contributes to the development of new materials in the fields of medicine, nanoelectronics, energy, biotechnology, information technology. Therefore, the synthesis of new materials by modifying of graphene oxide (GO) with nanocellulose and the study of its properties are of great interest. In this study synthesized nanocomposite material by modifying of graphene oxide (GO) from activated carbon (BAU-A) in a 1:1 volume ratio with nanocellulose (NC) from hemp stems belonging to the annual plant, and their chemical structure was studied by FTIR and UV-spectroscopy. The results of the study showed the absorption of the etheric bond C = O in the UV spectrum at full length 243 nm. The IR spectrum showed all the new etheric bonds O = C - OH at a wavelength of 1625 cm-1. The average particle sizes of GO was 352 nm and NC was 470 nm in length and 80 nm in width. The SEM analysis indicating the NC as a contact layer between ultralow thicknesses of the GO layers. The XRD analysis indicated GO-NC composite film is a substance comprising GO and NC. According to the results, modification of graphene oxide showed that its scope can be expanded as much as possible.
- 22 September 2021
- Published by Center of Physical Chemical Methods of Research and Analysis in Chemical Bulletin of Kazakh National University
- Vol. 102 (3) , 14-20
Open AccessSynthesis of nanocomposite material through modification of graphene oxide by nanocellulose
Intensive research of nanocomposites contributes to the development of new materials in the fields of medicine, nanoelectronics, energy, biotechnology, information technology. Therefore, the synthesis of new materials by modifying of graphene oxide (GO) with nanocellulose and the study of its properties are of great interest. In this study synthesized nanocomposite material by modifying of graphene oxide (GO) from activated carbon (BAU-A) in a 1:1 volume ratio with nanocellulose (NC) from hemp stems belonging to the annual plant, and their chemical structure was studied by FTIR and UV-spectroscopy. The results of the study showed the absorption of the etheric bond C = O in the UV spectrum at full length 243 nm. The IR spectrum showed all the new etheric bonds O = C - OH at a wavelength of 1625 cm-1. The average particle sizes of GO was 352 nm and NC was 470 nm in length and 80 nm in width. The SEM analysis indicating the NC as a contact layer between ultralow thicknesses of the GO layers. The XRD analysis indicated GO-NC composite film is a substance comprising GO and NC. According to the results, modification of graphene oxide showed that its scope can be expanded as much as possible.
- Open Access
- 30 June 2021
- Published by al-Farabi Kazakh National University in Physical Sciences and Technology
- Vol. 8 (1-2) , 66-70
Modification of nanostarch by citric acid
The negative impact of waste on the environment is growing with the declining oil reserves. Therefore, theattention to usage of green products and the green economy has grown worldwide. One manifestation ofthis is the growing demand for biomaterials. Starch is a biopolymer with large reserves of raw materialsand chemical modification of its structure allows to obtain new materials. In this paper, we present theresults of the experimental investigations on modifying of nanostarch with citric acid. Alcohol precipitationmethod was used for synthesis of nanostarch. The dispersion of the obtained nanostarch was studied by UVspectroscopy. The chemical structure of the modified nanostarch film was studied by FTIR spectroscopy.According to the results of FTIR, it was found that a new ester bonds are formed. Surface morphology wasstudied by scanning electron microscope and it was found that 0.1 g of film is completely soluble in waterin 360 seconds according to the kinetics of water solubility. Key words: nanostarch film, citric acid, FTIR, natural polymer.
- 30 June 2021
- Published by al-Farabi Kazakh National University in Physical Sciences and Technology
- Vol. 8 (1-2) , 66-70
Open AccessModification of nanostarch by citric acid
The negative impact of waste on the environment is growing with the declining oil reserves. Therefore, theattention to usage of green products and the green economy has grown worldwide. One manifestation ofthis is the growing demand for biomaterials. Starch is a biopolymer with large reserves of raw materialsand chemical modification of its structure allows to obtain new materials. In this paper, we present theresults of the experimental investigations on modifying of nanostarch with citric acid. Alcohol precipitationmethod was used for synthesis of nanostarch. The dispersion of the obtained nanostarch was studied by UVspectroscopy. The chemical structure of the modified nanostarch film was studied by FTIR spectroscopy.According to the results of FTIR, it was found that a new ester bonds are formed. Surface morphology wasstudied by scanning electron microscope and it was found that 0.1 g of film is completely soluble in waterin 360 seconds according to the kinetics of water solubility. Key words: nanostarch film, citric acid, FTIR, natural polymer.