Dariya D. Linkova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Dariya D. Linkova has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Marfa N. Egorikhina
Privolzhsky Research Medical University
18 shared publications - Diana Ya. Aleynik
Privolzhsky Research Medical University
14 shared publications - Yulia P. Rubtsova
Privolzhsky Research Medical University
14 shared publications - Ekaterina A. Farafontova
Federal State Budgetary Educational Institution of Higher Education, Privolzhsky Research Medical University of the Ministry of Health of the Russian Federation, 603005 Nizhny Novgorod, Russia
13 shared publications - Irina N. Charykova
Federal State Budgetary Educational Institution of Higher Education, Privolzhsky Research Medical University of the Ministry of Health of the Russian Federation, 603005 Nizhny Novgorod, Russia
12 shared publications - Ekaterina A. Levicheva
Federal State Budgetary Educational Institution of Higher Education, Privolzhsky Research Medical University of the Ministry of Health of the Russian Federation, 603005 Nizhny Novgorod, Russia
5 shared publications
Latest Publications
- Open Access
- 31 December 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 27 (1) , 447
Fibrin Glues: Proteins, Mechanism of Action, Classification, and Application
This research paper is concerned with fibrin glues, used as effective tools to stop bleeding in the case of wounds and surgical interventions. The paper provides data on the various fibrin glues—both currently used in practice and being developed, their sources, mechanisms of action, and properties. Such glues are biocompatible and are characterized by good adhesive and hemostatic properties. These characteristics mean that fibrin glues are currently widely used across a range of surgical applications. Such glues can be used independently or in combination with mechanical techniques, being particularly suitable for difficult-to-access parts of the body. The combined use of fibrin glues with various biologically active substances (BASs)—such as antibiotics and growth factors—and with cell therapy is a promising approach. Such adjuncts enhance the effectiveness of the glues and help to optimize the therapies. This research paper presents the latest data from studies using various experimental models demonstrating the increased efficacy of fibrin glues used in combination with BASs. We also report on the ongoing development of new fibrin glues for long-term use and with optimized formulations. Studies on the interactions of these glues with cells and tissues are supporting the creation of a new generation of fibrin glues with adjustable properties.
- 31 December 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 27 (1) , 447
Open AccessFibrin Glues: Proteins, Mechanism of Action, Classification, and Application
This research paper is concerned with fibrin glues, used as effective tools to stop bleeding in the case of wounds and surgical interventions. The paper provides data on the various fibrin glues—both currently used in practice and being developed, their sources, mechanisms of action, and properties. Such glues are biocompatible and are characterized by good adhesive and hemostatic properties. These characteristics mean that fibrin glues are currently widely used across a range of surgical applications. Such glues can be used independently or in combination with mechanical techniques, being particularly suitable for difficult-to-access parts of the body. The combined use of fibrin glues with various biologically active substances (BASs)—such as antibiotics and growth factors—and with cell therapy is a promising approach. Such adjuncts enhance the effectiveness of the glues and help to optimize the therapies. This research paper presents the latest data from studies using various experimental models demonstrating the increased efficacy of fibrin glues used in combination with BASs. We also report on the ongoing development of new fibrin glues for long-term use and with optimized formulations. Studies on the interactions of these glues with cells and tissues are supporting the creation of a new generation of fibrin glues with adjustable properties.
- Open Access
Matrices of Different Natures for Bone Tissue Engineering—A Comparative Analysis
Recent decades have been characterized by increasing numbers of bone tissue injuries and diseases resulting in the formation of bone defects. The number of such bone defects has also grown due to active surgical approaches implemented after surgical interventions for oncological, infectious, and dystrophic bone lesions. To repair such bone defects requires the use of bone tissue substitutes. Nowadays, constructs based on matrices of various compositions and structures, supplemented with the addition of biologically active components (including growth factors and cells), are the most promising approaches used in bone tissue engineering. The properties of the matrices are of the utmost importance in construct formation. This work presents the results of a comprehensive study of matrices of various natures intended for the formation of complex constructs for bone tissue engineering. Using a set of methods for studying the physical, mechanical, and biological characteristics, the total and associated porosity of the studied matrices, the structure, the mechanical parameters, and the level of cytotoxicity and cytocompatibility were determined. It was shown that all the studied materials were not cytotoxic (cytotoxicity rank of all matrices = 0–1). All matrices were porous, but samples of materials of biological origin had large pores ranging in size from 100 to 1000 μm, and pores of the hybrid polymer were sized from 0.1 to 100 μm. Total and open porosity ranged from 89% and 79% for the allogeneic matrix up to 67% and 48% for the hybrid polymer, respectively, while the σ values (compressive stress at break) of samples of all studied materials were close to each other. When human test culture MSCs interact with samples of these materials, it was shown that the cells adhere to the surface and structure of all materials and retain typical morphology, while also demonstrating the ability to proliferate and migrate along the surface and into the matrix structure, i.e., all materials are cytocompatible. Based on the data obtained, it can be assumed that all the studied matrices can be used for model biomedical studies and as a basis for constructs for bone tissue engineering. An adequate choice of research method at the earliest stages of the development of each material will ensure the most effective approaches for further work and subsequent use of this product.
Open AccessMatrices of Different Natures for Bone Tissue Engineering—A Comparative Analysis
Recent decades have been characterized by increasing numbers of bone tissue injuries and diseases resulting in the formation of bone defects. The number of such bone defects has also grown due to active surgical approaches implemented after surgical interventions for oncological, infectious, and dystrophic bone lesions. To repair such bone defects requires the use of bone tissue substitutes. Nowadays, constructs based on matrices of various compositions and structures, supplemented with the addition of biologically active components (including growth factors and cells), are the most promising approaches used in bone tissue engineering. The properties of the matrices are of the utmost importance in construct formation. This work presents the results of a comprehensive study of matrices of various natures intended for the formation of complex constructs for bone tissue engineering. Using a set of methods for studying the physical, mechanical, and biological characteristics, the total and associated porosity of the studied matrices, the structure, the mechanical parameters, and the level of cytotoxicity and cytocompatibility were determined. It was shown that all the studied materials were not cytotoxic (cytotoxicity rank of all matrices = 0–1). All matrices were porous, but samples of materials of biological origin had large pores ranging in size from 100 to 1000 μm, and pores of the hybrid polymer were sized from 0.1 to 100 μm. Total and open porosity ranged from 89% and 79% for the allogeneic matrix up to 67% and 48% for the hybrid polymer, respectively, while the σ values (compressive stress at break) of samples of all studied materials were close to each other. When human test culture MSCs interact with samples of these materials, it was shown that the cells adhere to the surface and structure of all materials and retain typical morphology, while also demonstrating the ability to proliferate and migrate along the surface and into the matrix structure, i.e., all materials are cytocompatible. Based on the data obtained, it can be assumed that all the studied matrices can be used for model biomedical studies and as a basis for constructs for bone tissue engineering. An adequate choice of research method at the earliest stages of the development of each material will ensure the most effective approaches for further work and subsequent use of this product.
- Open Access
- 14 August 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 26 (16) , 7840
Study of the Effectiveness of Skin Restoration Using a Biopolymer Hydrogel Scaffold with Encapsulated Mesenchymal Stem Cells
Improving the restoration of skin defects of various etiologies continues to be an important medical challenge globally. This primarily applies to the treatment of chronic wounds and major burns, which create particularly complex and socially significant problems for surgery. In recent decades the progress in these fields has largely been associated with techniques for regenerative medicine, specifically, techniques based on the use of tissue-engineered constructs. Before their use in clinical practice, all such newly developed constructs require preclinical studies to confirm their safety and effectiveness in animal models. This paper presents the results of preclinical studies of the effectiveness of restoration of full-layer degloving wounds in pigs using grafts of either an original biopolymer hydrogel scaffold or a skin equivalent based on it, but seeded with autologous skin cells (ASCs). It is demonstrated that the scaffold itself integrates into the wound bed tissues, facilitating cell recruitment and the accumulation and early maturation of granulation tissue. Then, at later stages of regeneration, the scaffold accelerates the maturation of connective tissue and promotes the formation of tissues similar to those of healthy skin in terms of thickness and structure. Owing to the ASCs present in it, the skin equivalent demonstrates greater effectiveness than the scaffold alone, in particular, due to overall faster remodeling of the graft connective tissue. Therefore, the scaffold we have developed and the skin equivalent based on it have much potential as products for the repair of skin wounds.
- 14 August 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 26 (16) , 7840
Open AccessStudy of the Effectiveness of Skin Restoration Using a Biopolymer Hydrogel Scaffold with Encapsulated Mesenchymal Stem Cells
Improving the restoration of skin defects of various etiologies continues to be an important medical challenge globally. This primarily applies to the treatment of chronic wounds and major burns, which create particularly complex and socially significant problems for surgery. In recent decades the progress in these fields has largely been associated with techniques for regenerative medicine, specifically, techniques based on the use of tissue-engineered constructs. Before their use in clinical practice, all such newly developed constructs require preclinical studies to confirm their safety and effectiveness in animal models. This paper presents the results of preclinical studies of the effectiveness of restoration of full-layer degloving wounds in pigs using grafts of either an original biopolymer hydrogel scaffold or a skin equivalent based on it, but seeded with autologous skin cells (ASCs). It is demonstrated that the scaffold itself integrates into the wound bed tissues, facilitating cell recruitment and the accumulation and early maturation of granulation tissue. Then, at later stages of regeneration, the scaffold accelerates the maturation of connective tissue and promotes the formation of tissues similar to those of healthy skin in terms of thickness and structure. Owing to the ASCs present in it, the skin equivalent demonstrates greater effectiveness than the scaffold alone, in particular, due to overall faster remodeling of the graft connective tissue. Therefore, the scaffold we have developed and the skin equivalent based on it have much potential as products for the repair of skin wounds.
- Open Access
Biocompatibility of New Hydrogels Based on a Copolymer of Fish Collagen and Methyl Methacrylate Obtained Using Heterogeneous Photocatalysis Under the Influence of Visible Light
New stable three-dimensional hydrogels were obtained in an inert gas atmosphere in light in an aqueous dispersion of the main components: cod collagen, methyl methacrylate, polyethylene glycol, RbTe1.5W0.5O6 complex oxide, and modifying additives. The analysis of the new hydrogels’ cytotoxicity using the MTT assay showed that the cytotoxicity of the sample extracts was observed in a number of examples, but was decreased with increasing dilution of the extracts. The decrease in cell viability at high concentrations of the extract is likely caused by a decrease in the number of specific components of the complete culture medium used to produce extracts. It is related to the well-known adsorption of medium proteins by the gel component, high-molecular compounds included in the matrix. The stimulating effect of the substances included in its composition was observed with a significant dilution of the extract, i.e., the proliferative activity of the cells increased. The extract of the hydrogel hydrolysate sample and all its dilutions did not show cytotoxicity in the MTT assay examples. It determines the prospect of its use on the wound surface, since hydrogel destruction occurs under the action of body enzymes. The new hydrogel is a promising material for creating wound coverings or scaffolds.
Open AccessBiocompatibility of New Hydrogels Based on a Copolymer of Fish Collagen and Methyl Methacrylate Obtained Using Heterogeneous Photocatalysis Under the Influence of Visible Light
New stable three-dimensional hydrogels were obtained in an inert gas atmosphere in light in an aqueous dispersion of the main components: cod collagen, methyl methacrylate, polyethylene glycol, RbTe1.5W0.5O6 complex oxide, and modifying additives. The analysis of the new hydrogels’ cytotoxicity using the MTT assay showed that the cytotoxicity of the sample extracts was observed in a number of examples, but was decreased with increasing dilution of the extracts. The decrease in cell viability at high concentrations of the extract is likely caused by a decrease in the number of specific components of the complete culture medium used to produce extracts. It is related to the well-known adsorption of medium proteins by the gel component, high-molecular compounds included in the matrix. The stimulating effect of the substances included in its composition was observed with a significant dilution of the extract, i.e., the proliferative activity of the cells increased. The extract of the hydrogel hydrolysate sample and all its dilutions did not show cytotoxicity in the MTT assay examples. It determines the prospect of its use on the wound surface, since hydrogel destruction occurs under the action of body enzymes. The new hydrogel is a promising material for creating wound coverings or scaffolds.
- 17 July 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 345
Hybrid PEO-RGD coatings for modeling the biological activity of Zr-2.5Nb alloy
- 17 July 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 345
Hybrid PEO-RGD coatings for modeling the biological activity of Zr-2.5Nb alloy
- Open Access
- 1 July 2025
- Published by NII KPSSZ in Complex Issues of Cardiovascular Diseases
- Vol. 14 (3) , 51-61
METHOD FOR DETERMINING THE VIABILITY OF MESENCHYMAL STEM CELLS IN TISSUE-ENGINEERED STRUCTURES DURING REGENERATION – EXPERIMENTAL SUBSTANTIATION OF EFFICIENCY
HighlightsThe method for determining the viability of mesenchymal stem cells in the composition of tissue-engineering constructs is proposed here. This method can become an effective tool for regenerative medicine and tissue engineering for assessing the mechanisms of the regenerative process when using tissue-engineered constructs and predicting their effectiveness in an in vitro system. AbstractAim. Еxperimental substantiation of the efficiency of the method for determining the viability of mesenchymal stem cells in tissue-engineered constructs during regenerationMethods. The experimental study was conducted on 12 animals (rats). A full-layer scalped wound with a diameter of 3 cm was formed in the animals. A tissue-engineering construct based on human plasma cryoprecipitate was implanted into the wound, with the composition of which a suspension of rat mesenchymal stem cells (MSCs) pre-stained with the DiOC14(3) tracer was introduced. At the control periods (3, 7–8, 14 and 21 days), the animals were withdrawn from the experiment. During the operation, the wound defect area was cut out for ex-tempore examination using wide-field fluorescence microscopy with visualization of samples with 40×, 100×, 200× magnification in the GFP fluorescence channel.Results. When examining the material obtained from animals on day 3, the external characteristics of the overwhelming majority of identified objects with characteristic fluorescent glow corresponded to the morphological characteristics of MSCs – spindle-shaped cells with characteristic processes. In the material obtained from experimental animals on days 7–8, a large number of cells stained with a tracer fluorescent membrane dye were also detected, which had a green fluorescent glow and characteristic morphology. In the biomaterial obtained on day 14 of the experiment, the number of objects with characteristic MSC morphology stained with the DiOC14(3) tracer was significantly less than on days 3 and 7–8 of the experiment. On day 21, a signal specific for the DiOC14(3) tracer was also detected, but it was not possible to visualize even single cells with the morphology characteristic of MSCs; the signal was probably due to fragments of membranes of eliminated MSCs labeled with a fluorescent dye.Conclusion. It was shown that MSCs in tissue-engineering constructs implanted on the animal wound retain viability and characteristic morphology for at least 14 days. It is important that the proposed method allows intravital visualization and photofixation of viable MSCs with characteristic morphology, and thus avoiding distortions that may be associated with fixation of biological material. The proposed method can become an effective tool for regenerative medicine and tissue engineering in relation to assessing the mechanisms of the regenerative process using TECs and predicting their effectiveness in the in vitro system.
- 1 July 2025
- Published by NII KPSSZ in Complex Issues of Cardiovascular Diseases
- Vol. 14 (3) , 51-61
Open AccessMETHOD FOR DETERMINING THE VIABILITY OF MESENCHYMAL STEM CELLS IN TISSUE-ENGINEERED STRUCTURES DURING REGENERATION – EXPERIMENTAL SUBSTANTIATION OF EFFICIENCY
HighlightsThe method for determining the viability of mesenchymal stem cells in the composition of tissue-engineering constructs is proposed here. This method can become an effective tool for regenerative medicine and tissue engineering for assessing the mechanisms of the regenerative process when using tissue-engineered constructs and predicting their effectiveness in an in vitro system. AbstractAim. Еxperimental substantiation of the efficiency of the method for determining the viability of mesenchymal stem cells in tissue-engineered constructs during regenerationMethods. The experimental study was conducted on 12 animals (rats). A full-layer scalped wound with a diameter of 3 cm was formed in the animals. A tissue-engineering construct based on human plasma cryoprecipitate was implanted into the wound, with the composition of which a suspension of rat mesenchymal stem cells (MSCs) pre-stained with the DiOC14(3) tracer was introduced. At the control periods (3, 7–8, 14 and 21 days), the animals were withdrawn from the experiment. During the operation, the wound defect area was cut out for ex-tempore examination using wide-field fluorescence microscopy with visualization of samples with 40×, 100×, 200× magnification in the GFP fluorescence channel.Results. When examining the material obtained from animals on day 3, the external characteristics of the overwhelming majority of identified objects with characteristic fluorescent glow corresponded to the morphological characteristics of MSCs – spindle-shaped cells with characteristic processes. In the material obtained from experimental animals on days 7–8, a large number of cells stained with a tracer fluorescent membrane dye were also detected, which had a green fluorescent glow and characteristic morphology. In the biomaterial obtained on day 14 of the experiment, the number of objects with characteristic MSC morphology stained with the DiOC14(3) tracer was significantly less than on days 3 and 7–8 of the experiment. On day 21, a signal specific for the DiOC14(3) tracer was also detected, but it was not possible to visualize even single cells with the morphology characteristic of MSCs; the signal was probably due to fragments of membranes of eliminated MSCs labeled with a fluorescent dye.Conclusion. It was shown that MSCs in tissue-engineering constructs implanted on the animal wound retain viability and characteristic morphology for at least 14 days. It is important that the proposed method allows intravital visualization and photofixation of viable MSCs with characteristic morphology, and thus avoiding distortions that may be associated with fixation of biological material. The proposed method can become an effective tool for regenerative medicine and tissue engineering in relation to assessing the mechanisms of the regenerative process using TECs and predicting their effectiveness in the in vitro system.
- Open Access
- 7 June 2024
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 25 (12)
Specific Features of the Functional Activity of Human Adipose Stromal Cells in the Structure of a Partial Skin-Equivalent
Mesenchymal adipose stromal cells (ASCs) are considered the most promising and accessible material for translational medicine. ASCs can be used independently or within the structure of scaffold-based constructs, as these not only ensure mechanical support, but can also optimize conditions for cell activity, as specific features of the scaffold structure have an impact on the vital activity of the cells. This manuscript presents a study of the secretion and accumulation that occur in a conditioned medium during the cultivation of human ASCs within the structure of such a partial skin-equivalent that is in contact with it. It is demonstrated that the ASCs retain their functional activity during cultivation both within this partial skin-equivalent structure and, separately, on plastic substrates: they proliferate and secrete various proteins that can then accumulate in the conditioned media. Our comparative study of changes in the conditioned media during cultivation of ASCs on plastic and within the partial skin-equivalent structure reveals the different dynamics of the release and accumulation of such secretory factors in the media under a variety of conditions of cell functioning. It is also demonstrated that the optimal markers for assessment of the ASCs’ secretory functions in the studied partial skin-equivalent structure are the trophic factors VEGF-A, HGF, MCP, SDF-1α, IL-6 and IL-8. The results will help with the development of an algorithm for preclinical studies of this skin-equivalent in vitro and may be useful in studying various other complex constructs that include ASCs.
- 7 June 2024
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 25 (12)
Open AccessSpecific Features of the Functional Activity of Human Adipose Stromal Cells in the Structure of a Partial Skin-Equivalent
Mesenchymal adipose stromal cells (ASCs) are considered the most promising and accessible material for translational medicine. ASCs can be used independently or within the structure of scaffold-based constructs, as these not only ensure mechanical support, but can also optimize conditions for cell activity, as specific features of the scaffold structure have an impact on the vital activity of the cells. This manuscript presents a study of the secretion and accumulation that occur in a conditioned medium during the cultivation of human ASCs within the structure of such a partial skin-equivalent that is in contact with it. It is demonstrated that the ASCs retain their functional activity during cultivation both within this partial skin-equivalent structure and, separately, on plastic substrates: they proliferate and secrete various proteins that can then accumulate in the conditioned media. Our comparative study of changes in the conditioned media during cultivation of ASCs on plastic and within the partial skin-equivalent structure reveals the different dynamics of the release and accumulation of such secretory factors in the media under a variety of conditions of cell functioning. It is also demonstrated that the optimal markers for assessment of the ASCs’ secretory functions in the studied partial skin-equivalent structure are the trophic factors VEGF-A, HGF, MCP, SDF-1α, IL-6 and IL-8. The results will help with the development of an algorithm for preclinical studies of this skin-equivalent in vitro and may be useful in studying various other complex constructs that include ASCs.
- Open Access
Specifics of Porous Polymer and Xenogeneic Matrices and of Bone Tissue Regeneration Related to Their Implantation into an Experimental Rabbit Defect
This paper provides a study of two bone substitutes: a hybrid porous polymer and an osteoplastic matrix based on a bovine-derived xenograft. Both materials are porous, but their pore characteristics are different. The osteoplastic matrix has pores of 300–600 µm and the hybrid polymer has smaller pores, generally of 6–20 µm, but with some pores up to 100 µm across. SEM data confirmed the porometry results and demonstrated the different structures of the materials. Therefore, both materials were characterized by an interconnected porous structure and provided conditions for the adhesion and vital activity of human ASCs in vitro. In an experimental model of rabbit shin bone defect, it was shown that, during the 6-month observation period, neither of the materials caused negative reactions in the experimental animals. By the end of the observation period, restoration of the defects in animals in both groups was completed, and elements of both materials were preserved in the defect areas. Data from morphological examinations and CT data demonstrated that the rate of rabbit bone tissue regeneration with the hybrid polymer was comparable to that with the osteoplastic matrix. Therefore, the hybrid polymer has good potential for use in further research and improvement in biomedical applications.
Open AccessSpecifics of Porous Polymer and Xenogeneic Matrices and of Bone Tissue Regeneration Related to Their Implantation into an Experimental Rabbit Defect
This paper provides a study of two bone substitutes: a hybrid porous polymer and an osteoplastic matrix based on a bovine-derived xenograft. Both materials are porous, but their pore characteristics are different. The osteoplastic matrix has pores of 300–600 µm and the hybrid polymer has smaller pores, generally of 6–20 µm, but with some pores up to 100 µm across. SEM data confirmed the porometry results and demonstrated the different structures of the materials. Therefore, both materials were characterized by an interconnected porous structure and provided conditions for the adhesion and vital activity of human ASCs in vitro. In an experimental model of rabbit shin bone defect, it was shown that, during the 6-month observation period, neither of the materials caused negative reactions in the experimental animals. By the end of the observation period, restoration of the defects in animals in both groups was completed, and elements of both materials were preserved in the defect areas. Data from morphological examinations and CT data demonstrated that the rate of rabbit bone tissue regeneration with the hybrid polymer was comparable to that with the osteoplastic matrix. Therefore, the hybrid polymer has good potential for use in further research and improvement in biomedical applications.
- Open Access
Features of Changes in the Structure and Properties of a Porous Polymer Material with Antibacterial Activity during Biodegradation in an In Vitro Model
Hybrid porous polymers based on poly-EGDMA and polylactide containing vancomycin, the concentration of which in the polymer varied by two orders of magnitude, were synthesized. The processes of polymer biodegradation and vancomycin release were studied in the following model media: phosphate-buffered saline (PBS), trypsin-Versene solution, and trypsin-PBS solution. The maximum antibiotic release was recorded during the first 3 h of extraction. The duration of antibiotic escape from the polymer samples in trypsin-containing media varied from 3 to 22 days, depending on the antibiotic content of the polymer. Keeping samples of the hybrid polymer in trypsin-containing model media resulted in acidification of the solutions—after 45 days, up to a pH of 1.84 in the trypsin-Versene solution and up to pH 1.65 in the trypsin-PBS solution. Here, the time dependences of the vancomycin release from the polymer into the medium and the decrease in pH of the medium correlated. These data are also consistent with the results of a study of the dynamics of sample weight loss during extraction in the examined model media. However, while the polymer porosity increased from ~53 to ~60% the pore size changed insignificantly, over only 10 μm. The polymer samples were characterized by their antibacterial activity against Staphylococcus aureus, and this activity persisted for up to 21 days during biodegradation of the material, regardless of the medium type used in model. Surface-dependent human cells (dermal fibroblasts) adhere well, spread out, and maintain high viability on samples of the functionalized hybrid polymer, thus demonstrating its biocompatibility in vitro.
Open AccessFeatures of Changes in the Structure and Properties of a Porous Polymer Material with Antibacterial Activity during Biodegradation in an In Vitro Model
Hybrid porous polymers based on poly-EGDMA and polylactide containing vancomycin, the concentration of which in the polymer varied by two orders of magnitude, were synthesized. The processes of polymer biodegradation and vancomycin release were studied in the following model media: phosphate-buffered saline (PBS), trypsin-Versene solution, and trypsin-PBS solution. The maximum antibiotic release was recorded during the first 3 h of extraction. The duration of antibiotic escape from the polymer samples in trypsin-containing media varied from 3 to 22 days, depending on the antibiotic content of the polymer. Keeping samples of the hybrid polymer in trypsin-containing model media resulted in acidification of the solutions—after 45 days, up to a pH of 1.84 in the trypsin-Versene solution and up to pH 1.65 in the trypsin-PBS solution. Here, the time dependences of the vancomycin release from the polymer into the medium and the decrease in pH of the medium correlated. These data are also consistent with the results of a study of the dynamics of sample weight loss during extraction in the examined model media. However, while the polymer porosity increased from ~53 to ~60% the pore size changed insignificantly, over only 10 μm. The polymer samples were characterized by their antibacterial activity against Staphylococcus aureus, and this activity persisted for up to 21 days during biodegradation of the material, regardless of the medium type used in model. Surface-dependent human cells (dermal fibroblasts) adhere well, spread out, and maintain high viability on samples of the functionalized hybrid polymer, thus demonstrating its biocompatibility in vitro.
- Open Access
Specifics of Cryopreservation of Hydrogel Biopolymer Scaffolds with Encapsulated Mesenchymal Stem Cells
The demand for regenerative medicine products is growing rapidly in clinical practice. Unfortunately, their use has certain limitations. One of these, which significantly constrains the widespread distribution and commercialization of such materials, is their short life span. For products containing suspensions of cells, this issue can be solved by using cryopreservation. However, this approach is rarely used for multicomponent tissue-engineered products due to the complexity of selecting appropriate cryopreservation protocols and the lack of established criteria for assessing the quality of such products once defrosted. Our research is aimed at developing a cryopreservation protocol for an original hydrogel scaffold with encapsulated MSCs and developing a set of criteria for assessing the quality of their functional activity in vitro. The scaffolds were frozen using two alternative types of cryocontainers and stored at either −40 °C or −80 °C. After cryopreservation, the external state of the scaffolds was evaluated in addition to recording the cell viability, visible changes during subsequent cultivation, and any alterations in proliferative and secretory activity. These observations were compared to those of scaffolds cultivated without cryopreservation. It was shown that cryopreservation at −80 °C in an appropriate type of cryocontainer was optimal for the hydrogels/adipose-derived stem cells (ASCs) tested if it provided a smooth temperature decrease during freezing over a period of at least three hours until the target values of the cryopreservation temperature regimen were reached. It was shown that evaluating a set of indicators, including the viability, the morphology, and the proliferative and secretory activity of the cells, enables the characterization of the quality of a tissue-engineered construct after its withdrawal from cryopreservation, as well as indicating the effectiveness of the cryopreservation protocol.
Open AccessSpecifics of Cryopreservation of Hydrogel Biopolymer Scaffolds with Encapsulated Mesenchymal Stem Cells
The demand for regenerative medicine products is growing rapidly in clinical practice. Unfortunately, their use has certain limitations. One of these, which significantly constrains the widespread distribution and commercialization of such materials, is their short life span. For products containing suspensions of cells, this issue can be solved by using cryopreservation. However, this approach is rarely used for multicomponent tissue-engineered products due to the complexity of selecting appropriate cryopreservation protocols and the lack of established criteria for assessing the quality of such products once defrosted. Our research is aimed at developing a cryopreservation protocol for an original hydrogel scaffold with encapsulated MSCs and developing a set of criteria for assessing the quality of their functional activity in vitro. The scaffolds were frozen using two alternative types of cryocontainers and stored at either −40 °C or −80 °C. After cryopreservation, the external state of the scaffolds was evaluated in addition to recording the cell viability, visible changes during subsequent cultivation, and any alterations in proliferative and secretory activity. These observations were compared to those of scaffolds cultivated without cryopreservation. It was shown that cryopreservation at −80 °C in an appropriate type of cryocontainer was optimal for the hydrogels/adipose-derived stem cells (ASCs) tested if it provided a smooth temperature decrease during freezing over a period of at least three hours until the target values of the cryopreservation temperature regimen were reached. It was shown that evaluating a set of indicators, including the viability, the morphology, and the proliferative and secretory activity of the cells, enables the characterization of the quality of a tissue-engineered construct after its withdrawal from cryopreservation, as well as indicating the effectiveness of the cryopreservation protocol.