Meng Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Meng Cao has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Mukul M. Sharma
The University of Texas at Austin
8 shared publicationsAbdullah Cihan
2 shared publications- Abdullah Cihan
Energy Geosciences Division Lawrence Berkeley National Laboratory Berkeley CA USA
2 shared publications J. Birkholzer
Energy Geosciences Division Lawrence Berkeley National Laboratory Berkeley CA USA
2 shared publicationsJens Birkholzer
2 shared publicationsJonny Rutqvist
2 shared publications
Latest Publications
- Open Access
- 25 February 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (3)
A Boundary Element Model for Assessing Large‐Scale Pressurization in Faulted Geological Storage Systems
Assessing large‐scale pressurization at the regional scale—a possible outcome of large subsurface storage applications such as wastewater injection and geological carbon sequestration—presents significant computational challenges. These challenges are particularly pronounced when accounting for complex geologic structures with multiple reservoir and caprock layers, fault zones, and wells. This study introduces a computationally efficient model that integrates single‐phase semi‐analytical solutions with a boundary element (BE) approach. The model simulates pressure propagation in multilayered 3D systems, including vertical faults, caprock, basement, and confining units. We apply this new model to a representative scenario involving CO 2 injection near a partially sealing fault with verification against an independent two‐phase flow model. Results demonstrate that our model accurately captures far‐field pressure responses and that, outside the CO 2 plume zone, pressure predictions from single‐phase and two‐phase models are nearly identical. This supports the use of single‐phase models like ours for efficient estimation of far‐field pressure changes. Additionally, we demonstrate its effectiveness at a large scale, incorporating multiple wells and faults. With its ability to represent multiple wells, fault zones, and geological heterogeneity, our model is well suited for assessments of basin‐scale pressurization. Its computational efficiency also makes it a promising tool for integration with optimization frameworks aimed at designing and managing injection strategies in faulted storage systems.
- 25 February 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (3)
Open AccessA Boundary Element Model for Assessing Large‐Scale Pressurization in Faulted Geological Storage Systems
Assessing large‐scale pressurization at the regional scale—a possible outcome of large subsurface storage applications such as wastewater injection and geological carbon sequestration—presents significant computational challenges. These challenges are particularly pronounced when accounting for complex geologic structures with multiple reservoir and caprock layers, fault zones, and wells. This study introduces a computationally efficient model that integrates single‐phase semi‐analytical solutions with a boundary element (BE) approach. The model simulates pressure propagation in multilayered 3D systems, including vertical faults, caprock, basement, and confining units. We apply this new model to a representative scenario involving CO 2 injection near a partially sealing fault with verification against an independent two‐phase flow model. Results demonstrate that our model accurately captures far‐field pressure responses and that, outside the CO 2 plume zone, pressure predictions from single‐phase and two‐phase models are nearly identical. This supports the use of single‐phase models like ours for efficient estimation of far‐field pressure changes. Additionally, we demonstrate its effectiveness at a large scale, incorporating multiple wells and faults. With its ability to represent multiple wells, fault zones, and geological heterogeneity, our model is well suited for assessments of basin‐scale pressurization. Its computational efficiency also makes it a promising tool for integration with optimization frameworks aimed at designing and managing injection strategies in faulted storage systems.
- Open Access
- 11 September 2025
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 195
Factors controlling injection-induced rupture of intersecting faults during geological sequestration of CO2
- 11 September 2025
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 195
Open AccessFactors controlling injection-induced rupture of intersecting faults during geological sequestration of CO2
- Open Access
- 23 June 2025
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 193
Modeling supercritical CO2 injection induced rupture of a minor fault embedded in a poroelastic layered reservoir-caprock system
- 23 June 2025
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 193
Open AccessModeling supercritical CO2 injection induced rupture of a minor fault embedded in a poroelastic layered reservoir-caprock system
- Open Access
- 16 May 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (10)
Hydromechanical Modeling of Fault Rupture in Geologic CO 2 Sequestration: A Comparison of Two Failure Criteria
The large‐scale implementation of geological carbon sequestration has raised concerns about potential fault activation and induced seismicity, which could compromise storage integrity and pose seismic risks. We theoretically compared two failure criteria, Mohr‐Coulomb (MC) and Modified Cam‐Clay criteria (MCC), to assess fault rupture during CO 2 storage. Both criteria characterize fault behavior in a specific stress regime but differ in reducing the complexity of fault rupture to a few key mechanisms. Using a coupled hydromechanical model, we demonstrate that the choice of a failure criterion and the physics of fault weakening associated with these criteria strongly condition fault response to a given fluid injection. MC mainly relates rupture to friction, while MCC relates rupture to fault poro‐plasticity. Our findings highlight that the selection of a failure criterion, being inherently subjective, can significantly alter the predicted fault behavior during CO 2 storage, thereby impacting the reliability of geomechanical risk assessments.
- 16 May 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (10)
Open AccessHydromechanical Modeling of Fault Rupture in Geologic CO 2 Sequestration: A Comparison of Two Failure Criteria
The large‐scale implementation of geological carbon sequestration has raised concerns about potential fault activation and induced seismicity, which could compromise storage integrity and pose seismic risks. We theoretically compared two failure criteria, Mohr‐Coulomb (MC) and Modified Cam‐Clay criteria (MCC), to assess fault rupture during CO 2 storage. Both criteria characterize fault behavior in a specific stress regime but differ in reducing the complexity of fault rupture to a few key mechanisms. Using a coupled hydromechanical model, we demonstrate that the choice of a failure criterion and the physics of fault weakening associated with these criteria strongly condition fault response to a given fluid injection. MC mainly relates rupture to friction, while MCC relates rupture to fault poro‐plasticity. Our findings highlight that the selection of a failure criterion, being inherently subjective, can significantly alter the predicted fault behavior during CO 2 storage, thereby impacting the reliability of geomechanical risk assessments.
- 20 March 2025
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (05) , 2404-2417
Impact of Dynamic Changes in Natural Fracture Fluid Pressure on the Propagation and Geometry of Hydraulic Fracture Networks
Summary: In past studies, pressure changes in natural fractures that are filled with fluids have been ignored when studying the interaction of hydraulic fractures with natural fractures, leading to limitations in fracture design and production optimization. To overcome these limitations, changes in natural fracture fluid pressure are fully accounted for in an integrated fracturing-production model to assess their effect on fracture growth in naturally fractured formations and subsequent production from the complex fracture network. An efficient approach that uses the Skempton’s coefficient is adopted to estimate the variation of fluid pressure in natural fractures induced by variations in stresses. The importance of capturing changes in natural fracture fluid pressure is first demonstrated, followed by an extension of the model to investigate the effect of in-situ stress contrast and fracturing sequence on the geometry of hydraulic fractures. The results show that (1) variations of natural fracture fluid pressure significantly impact the interaction between hydraulic and natural fractures, changing the geometry of the created fracture network and the subsequent production rate; (2) a larger stress contrast (the anisotropy between maximum and minimum horizontal stress) tends to reactivate far-field natural fractures that are optimally oriented and critically stressed, increasing the complexity of the fracture network that includes backbone and isolated fractures but leading to a shorter backbone fracture and a lower production rate; and (3) staggered zipper fracturing, strategically sequencing the fracturing process, is expected to generate better fracture patterns and improve well performance.
- 20 March 2025
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (05) , 2404-2417
Impact of Dynamic Changes in Natural Fracture Fluid Pressure on the Propagation and Geometry of Hydraulic Fracture Networks
Summary: In past studies, pressure changes in natural fractures that are filled with fluids have been ignored when studying the interaction of hydraulic fractures with natural fractures, leading to limitations in fracture design and production optimization. To overcome these limitations, changes in natural fracture fluid pressure are fully accounted for in an integrated fracturing-production model to assess their effect on fracture growth in naturally fractured formations and subsequent production from the complex fracture network. An efficient approach that uses the Skempton’s coefficient is adopted to estimate the variation of fluid pressure in natural fractures induced by variations in stresses. The importance of capturing changes in natural fracture fluid pressure is first demonstrated, followed by an extension of the model to investigate the effect of in-situ stress contrast and fracturing sequence on the geometry of hydraulic fractures. The results show that (1) variations of natural fracture fluid pressure significantly impact the interaction between hydraulic and natural fractures, changing the geometry of the created fracture network and the subsequent production rate; (2) a larger stress contrast (the anisotropy between maximum and minimum horizontal stress) tends to reactivate far-field natural fractures that are optimally oriented and critically stressed, increasing the complexity of the fracture network that includes backbone and isolated fractures but leading to a shorter backbone fracture and a lower production rate; and (3) staggered zipper fracturing, strategically sequencing the fracturing process, is expected to generate better fracture patterns and improve well performance.
- 6 October 2024
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 59 (6) , 5899-5915
An Inversion-Based Microseismic Simulator for Fracture Diagnostics
- 6 October 2024
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 59 (6) , 5899-5915
An Inversion-Based Microseismic Simulator for Fracture Diagnostics
- 27 January 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (5) , 3239-3253
A Novel Integrated DFN-Fracturing-Reservoir Model: A Case Study
- 27 January 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (5) , 3239-3253
A Novel Integrated DFN-Fracturing-Reservoir Model: A Case Study
- 12 November 2022
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 220
A computationally efficient model for fracture propagation and fluid flow in naturally fractured reservoirs
- 12 November 2022
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 220
A computationally efficient model for fracture propagation and fluid flow in naturally fractured reservoirs
- 19 September 2022
- Published by Society of Petroleum Engineers (SPE) in SPE Drilling & Completion
- Vol. 38 (01) , 131-145
Factors Controlling the Flow and Connectivity in Fracture Networks in Naturally Fractured Geothermal Formations
Summary: The productivity and injectivity of hydraulically fractured geothermal wells in naturally fractured formations depend on the connectivity of fracture networks created by the interaction of hydraulic fractures with natural fractures. The primary objectives of this paper are (a) to define quantitatively the connectivity of the created fracture network, (b) to determine the factors that control the connectivity of fracture networks bounded by wells, and (c) to propose ways in which the flow capacity and fracture connectivity can be improved by changes to the hydraulic fracture design.A fully 3D hydraulic fracturing simulator has been developed that considers the interaction of hydraulic fractures with natural fractures by solving for the stresses, fluid flow, heat transfer, fracture growth, and intersection. These propagated fractures, which include hydraulic fractures and reactivated natural fractures, are divided into backbone, dead-end, and isolated fractures. Different well patterns that aim to optimize the connectivity of the injector to the producer (optimize the area of the backbone fractures) are simulated. A sensitivity analysis is conducted to investigate the effect of various parameters on the connectivity of wells through fractures. An optimal well pattern is needed to maximize the connected fracture area that provides a conductive path for heat extraction from naturally fractured geothermal reservoirs. Our results show that the connectivity of fracture networks is dramatically impacted by the degree of deflection, crossing, and merging of hydraulic fractures with natural fractures. An example is used to investigate the effect of backbone and dead-end fractures on heat extraction from an enhanced geothermal system (EGS).The detailed parametric study helps us better understand the factors that influence the geometry and connectivity of fracture networks and guide us in hydraulic fracture design and well spacing optimization in naturally fractured geothermal reservoirs.
- 19 September 2022
- Published by Society of Petroleum Engineers (SPE) in SPE Drilling & Completion
- Vol. 38 (01) , 131-145
Factors Controlling the Flow and Connectivity in Fracture Networks in Naturally Fractured Geothermal Formations
Summary: The productivity and injectivity of hydraulically fractured geothermal wells in naturally fractured formations depend on the connectivity of fracture networks created by the interaction of hydraulic fractures with natural fractures. The primary objectives of this paper are (a) to define quantitatively the connectivity of the created fracture network, (b) to determine the factors that control the connectivity of fracture networks bounded by wells, and (c) to propose ways in which the flow capacity and fracture connectivity can be improved by changes to the hydraulic fracture design.A fully 3D hydraulic fracturing simulator has been developed that considers the interaction of hydraulic fractures with natural fractures by solving for the stresses, fluid flow, heat transfer, fracture growth, and intersection. These propagated fractures, which include hydraulic fractures and reactivated natural fractures, are divided into backbone, dead-end, and isolated fractures. Different well patterns that aim to optimize the connectivity of the injector to the producer (optimize the area of the backbone fractures) are simulated. A sensitivity analysis is conducted to investigate the effect of various parameters on the connectivity of wells through fractures. An optimal well pattern is needed to maximize the connected fracture area that provides a conductive path for heat extraction from naturally fractured geothermal reservoirs. Our results show that the connectivity of fracture networks is dramatically impacted by the degree of deflection, crossing, and merging of hydraulic fractures with natural fractures. An example is used to investigate the effect of backbone and dead-end fractures on heat extraction from an enhanced geothermal system (EGS).The detailed parametric study helps us better understand the factors that influence the geometry and connectivity of fracture networks and guide us in hydraulic fracture design and well spacing optimization in naturally fractured geothermal reservoirs.