Yuqian Gu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuqian Gu has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Deji Akinwande
Microelectronics Research Center, Department of Electrical and Computer Engineering, The University of Texas at Austin, Austin, USA
6 shared publications - Shanmukh Kutagulla
Texas Materials Institute, The University of Texas at Austin, Austin, USA
4 shared publications Kenneth M. Liechti
Materials Science and Engineering and Texas Materials Institute, University of Texas at Austin, Austin, Texas 78712, United States
2 shared publications- Sivasakthya Mohan
Microelectronics Research Center, The University of Texas at Austin, Austin, Texas 78758, United States
2 shared publications - Sung Jin Yang
Microelectronics Research Center, The University of Texas at Austin, Austin, Texas 78758, United States
2 shared publications - Yifu Huang
Department of Electrical and Computer Engineering, The University of Texas at Austin, Austin, TX, USA
2 shared publications
Latest Publications
- 16 January 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (4) , 3313-3322
Volatile and Nonvolatile Resistive Switching Coexistence in Conductive Point Hexagonal Boron Nitride Monolayer
Recently, we demonstrated the nonvolatile resistive switching effects of metal-insulator-metal (MIM) atomristor structures based on two-dimensional (2D) monolayers. However, there are many remaining combinations between 2D monolayers and metal electrodes; hence, there is a need to further explore 2D resistance switching devices from material selections to future perspectives. This study investigated the volatile and nonvolatile switching coexistence of monolayer hexagonal boron nitride (h-BN) atomristors using top and bottom silver (Ag) metal electrodes. Utilizing an h-BN monolayer and Ag electrodes, we found that the transition between volatile and nonvolatile switching is attributed to the thickness/stiffness of chain-like conductive bridges between h-BN and Ag surfaces based on the current compliance and atomristor area. Computations indicate a "weak" bridge is responsible for volatile switching, while a "strong" bridge is formed for nonvolatile switching. The current compliance determines the number of Ag atoms that undergo dissociation at the electrode, while the atomristor area determines the degree of electric field localization that forms more stable conductive bridges. The findings of this study suggest that the h-BN atomristor using Ag electrodes shows promise as a potential solution to integrate both volatile neurons and nonvolatile synapses in a single neuromorphic crossbar array structure through electrical and dimensional designs.
- 16 January 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (4) , 3313-3322
Volatile and Nonvolatile Resistive Switching Coexistence in Conductive Point Hexagonal Boron Nitride Monolayer
Recently, we demonstrated the nonvolatile resistive switching effects of metal-insulator-metal (MIM) atomristor structures based on two-dimensional (2D) monolayers. However, there are many remaining combinations between 2D monolayers and metal electrodes; hence, there is a need to further explore 2D resistance switching devices from material selections to future perspectives. This study investigated the volatile and nonvolatile switching coexistence of monolayer hexagonal boron nitride (h-BN) atomristors using top and bottom silver (Ag) metal electrodes. Utilizing an h-BN monolayer and Ag electrodes, we found that the transition between volatile and nonvolatile switching is attributed to the thickness/stiffness of chain-like conductive bridges between h-BN and Ag surfaces based on the current compliance and atomristor area. Computations indicate a "weak" bridge is responsible for volatile switching, while a "strong" bridge is formed for nonvolatile switching. The current compliance determines the number of Ag atoms that undergo dissociation at the electrode, while the atomristor area determines the degree of electric field localization that forms more stable conductive bridges. The findings of this study suggest that the h-BN atomristor using Ag electrodes shows promise as a potential solution to integrate both volatile neurons and nonvolatile synapses in a single neuromorphic crossbar array structure through electrical and dimensional designs.
- 12 October 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (20) , 19018-19028
Direct Metal-Free Growth and Dry Separation of Bilayer Graphene on Sapphire: Implications for Electronic Applications
- 12 October 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (20) , 19018-19028
Direct Metal-Free Growth and Dry Separation of Bilayer Graphene on Sapphire: Implications for Electronic Applications
- 13 April 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (15) , 2214250
Reliability Improvement and Effective Switching Layer Model of Thin‐Film MoS2 Memristors
2D memristors have demonstrated attractive resistive switching characteristics recently but also suffer from the reliability issue, which limits practical applications. Previous efforts on 2D memristors have primarily focused on exploring new material systems, while damage from the metallization step remains a practical concern for the reliability of 2D memristors. Here, the impact of metallization conditions and the thickness of MoS2 films on the reliability and other device metrics of MoS2‐based memristors is carefully studied. The statistical electrical measurements show that the reliability can be improved to 92% for yield and improved by ≈16× for average DC cycling endurance in the devices by reducing the top electrode (TE) deposition rate and increasing the thickness of MoS2 films. Intriguing convergence of switching voltages and resistance ratio is revealed by the statistical analysis of experimental switching cycles. An “effective switching layer” model compatible with both monolayer and few‐layer MoS2, is proposed to understand the reliability improvement related to the optimization of fabrication configuration and the convergence of switching metrics. The Monte Carlo simulations help illustrate the underlying physics of endurance failure associated with cluster formation and provide additional insight into endurance improvement with device fabrication optimization.
- 13 April 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (15) , 2214250
Reliability Improvement and Effective Switching Layer Model of Thin‐Film MoS2 Memristors
2D memristors have demonstrated attractive resistive switching characteristics recently but also suffer from the reliability issue, which limits practical applications. Previous efforts on 2D memristors have primarily focused on exploring new material systems, while damage from the metallization step remains a practical concern for the reliability of 2D memristors. Here, the impact of metallization conditions and the thickness of MoS2 films on the reliability and other device metrics of MoS2‐based memristors is carefully studied. The statistical electrical measurements show that the reliability can be improved to 92% for yield and improved by ≈16× for average DC cycling endurance in the devices by reducing the top electrode (TE) deposition rate and increasing the thickness of MoS2 films. Intriguing convergence of switching voltages and resistance ratio is revealed by the statistical analysis of experimental switching cycles. An “effective switching layer” model compatible with both monolayer and few‐layer MoS2, is proposed to understand the reliability improvement related to the optimization of fabrication configuration and the convergence of switching metrics. The Monte Carlo simulations help illustrate the underlying physics of endurance failure associated with cluster formation and provide additional insight into endurance improvement with device fabrication optimization.
- 20 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (12) , 16308-16316
Comparative Study between Sulfurized MoS2 from Molybdenum and Molybdenum Trioxide Precursors for Thin-Film Device Applications
Two-dimensional (2D) materials have been studied as an emerging class of nanomaterials owing to their attractive properties in nearly every field of science and technology. Molybdenum disulfide (MoS2) is one of the more promising candidates of these atomically thin 2D materials for its technological potential. The facile synthesis of MoS2 remains a matter of broad interest. In this study, MoS2 was synthesized by chemical vapor deposition sulfurization at various temperatures (550 °C, 650 °C, and 750 °C) of either precursor molybdenum metal (Mo) or molybdenum trioxide (MoO3) deposited on silicon/silicon dioxide (Si/SiO2) via e-beam evaporation. Monolayer, bilayer, and few layers sulfurized samples have been grown and verified by Raman, photoluminescence spectroscopy, XRD, XPS, and AFM. MoO3 sulfurization provided monolayer growth in comparison to Mo sulfurization under the same conditions and precursor thicknesses. Optical microscopy showed the homogeneous nature of grown samples. A main finding of this work is that MoO3 sulfurization produced higher quality MoS2 as compared to those grown by an Mo precursor. Device characteristics based on monolayer MoO3 sulfurized MoS2-x include nonvolatile resistive switching with Ion/Ioff ≈ 104 at a relatively low operating bias of ±1 V. In addition, field-effect transistor characteristics revealed p-type material growth with a carrier mobility ∼ 41 cm2 V-1 s-1, which is in contrast to typically observed n-type characteristics.
- 20 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (12) , 16308-16316
Comparative Study between Sulfurized MoS2 from Molybdenum and Molybdenum Trioxide Precursors for Thin-Film Device Applications
Two-dimensional (2D) materials have been studied as an emerging class of nanomaterials owing to their attractive properties in nearly every field of science and technology. Molybdenum disulfide (MoS2) is one of the more promising candidates of these atomically thin 2D materials for its technological potential. The facile synthesis of MoS2 remains a matter of broad interest. In this study, MoS2 was synthesized by chemical vapor deposition sulfurization at various temperatures (550 °C, 650 °C, and 750 °C) of either precursor molybdenum metal (Mo) or molybdenum trioxide (MoO3) deposited on silicon/silicon dioxide (Si/SiO2) via e-beam evaporation. Monolayer, bilayer, and few layers sulfurized samples have been grown and verified by Raman, photoluminescence spectroscopy, XRD, XPS, and AFM. MoO3 sulfurization provided monolayer growth in comparison to Mo sulfurization under the same conditions and precursor thicknesses. Optical microscopy showed the homogeneous nature of grown samples. A main finding of this work is that MoO3 sulfurization produced higher quality MoS2 as compared to those grown by an Mo precursor. Device characteristics based on monolayer MoO3 sulfurized MoS2-x include nonvolatile resistive switching with Ion/Ioff ≈ 104 at a relatively low operating bias of ±1 V. In addition, field-effect transistor characteristics revealed p-type material growth with a carrier mobility ∼ 41 cm2 V-1 s-1, which is in contrast to typically observed n-type characteristics.
- Open Access
- 9 May 2022
- Published by Springer Nature in npj 2D Materials and Applications
- Vol. 6 (1) , 1-12
Electron irradiation-induced defects for reliability improvement in monolayer MoS2-based conductive-point memory devices
Monolayer molybdenum disulfide has been previously discovered to exhibit non-volatile resistive switching behavior in a vertical metal-insulator-metal structure, featuring ultra-thin sub-nanometer active layer thickness. However, the reliability of these nascent 2D-based memory devices was not previously investigated for practical applications. Here, we employ an electron irradiation treatment on monolayer MoS2 film to modify the defect properties. Raman, photoluminescence, and X-ray photoelectron spectroscopy measurements have been performed to confirm the increasing amount of sulfur vacancies introduced by the e-beam irradiation process. The statistical electrical studies reveal the reliability can be improved by up to 1.5× for yield and 11× for average DC cycling endurance in the devices with a moderate radiation dose compared to unirradiated devices. Based on our previously proposed virtual conductive-point model with the metal ion substitution into sulfur vacancy, Monte Carlo simulations have been performed to illustrate the irradiation effect on device reliability, elucidating a clustering failure mechanism. This work provides an approach by electron irradiation to enhance the reliability of 2D memory devices and inspires further research in defect engineering to precisely control the switching properties for a wide range of applications from memory computing to radio-frequency switches.
- 9 May 2022
- Published by Springer Nature in npj 2D Materials and Applications
- Vol. 6 (1) , 1-12
Open AccessElectron irradiation-induced defects for reliability improvement in monolayer MoS2-based conductive-point memory devices
Monolayer molybdenum disulfide has been previously discovered to exhibit non-volatile resistive switching behavior in a vertical metal-insulator-metal structure, featuring ultra-thin sub-nanometer active layer thickness. However, the reliability of these nascent 2D-based memory devices was not previously investigated for practical applications. Here, we employ an electron irradiation treatment on monolayer MoS2 film to modify the defect properties. Raman, photoluminescence, and X-ray photoelectron spectroscopy measurements have been performed to confirm the increasing amount of sulfur vacancies introduced by the e-beam irradiation process. The statistical electrical studies reveal the reliability can be improved by up to 1.5× for yield and 11× for average DC cycling endurance in the devices with a moderate radiation dose compared to unirradiated devices. Based on our previously proposed virtual conductive-point model with the metal ion substitution into sulfur vacancy, Monte Carlo simulations have been performed to illustrate the irradiation effect on device reliability, elucidating a clustering failure mechanism. This work provides an approach by electron irradiation to enhance the reliability of 2D memory devices and inspires further research in defect engineering to precisely control the switching properties for a wide range of applications from memory computing to radio-frequency switches.
- 7 October 2021
- Published by Wiley in Advanced Electronic Materials
- Vol. 8 (2) , 2100515
Sulfurization Engineering of One‐Step Low‐Temperature MoS2 and WS2 Thin Films for Memristor Device Applications
2D materials have been of considerable interest as new materials for device applications. Non‐volatile resistive switching applications of MoS2 and WS2 have been previously demonstrated; however, these applications are dramatically limited by high temperatures and extended times needed for the large‐area synthesis of 2D materials on crystalline substrates. The experimental results demonstrate a one‐step sulfurization method to synthesize MoS2 and WS2 at 550 °C in 15 min on sapphire wafers. Furthermore, a large area transfer of the synthesized thin films to SiO2/Si substrates is achieved. Following this, MoS2 and WS2 memristors are fabricated that exhibit stable non‐volatile switching and a satisfactory large on/off current ratio (103–105) with good uniformity. Tuning the sulfurization parameters (temperature and metal precursor thickness) is found to be a straightforward and effective strategy to improve the performance of the memristors. The demonstration of large‐scale MoS2 and WS2 memristors with a one‐step low‐temperature sulfurization method with simple strategy to tuning can lead to potential applications such as flexible memory and neuromorphic computing.
- 7 October 2021
- Published by Wiley in Advanced Electronic Materials
- Vol. 8 (2) , 2100515
Sulfurization Engineering of One‐Step Low‐Temperature MoS2 and WS2 Thin Films for Memristor Device Applications
2D materials have been of considerable interest as new materials for device applications. Non‐volatile resistive switching applications of MoS2 and WS2 have been previously demonstrated; however, these applications are dramatically limited by high temperatures and extended times needed for the large‐area synthesis of 2D materials on crystalline substrates. The experimental results demonstrate a one‐step sulfurization method to synthesize MoS2 and WS2 at 550 °C in 15 min on sapphire wafers. Furthermore, a large area transfer of the synthesized thin films to SiO2/Si substrates is achieved. Following this, MoS2 and WS2 memristors are fabricated that exhibit stable non‐volatile switching and a satisfactory large on/off current ratio (103–105) with good uniformity. Tuning the sulfurization parameters (temperature and metal precursor thickness) is found to be a straightforward and effective strategy to improve the performance of the memristors. The demonstration of large‐scale MoS2 and WS2 memristors with a one‐step low‐temperature sulfurization method with simple strategy to tuning can lead to potential applications such as flexible memory and neuromorphic computing.