Guoming Liu
Guoming Liu has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Anzhou Qi
China Unclear Power Engineering Co.LTD, Beijing, China
1 shared publication Chenglong Zhang
China Nuclear Power Engineering Co 100840 Ltd Beijing China
1 shared publication- Dengwang Wang
Department of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication - Haipeng Li
Shaanxi Engineering Research Center of Advanced Nuclear Energy, School of Nuclear Science and Technology, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication - Hao Dong
China Unclear Power Engineering Co.LTD, Beijing, China
1 shared publication - Haoyu Zhou
Department of Engineering Physics, Tsinghua University, Beijing 100084, China
1 shared publication
Latest Publications
- 1 February 2026
- Published by China Science Publishing & Media Ltd. in Nuclear Techniques
Configuration of nuclear detecting system for gas-cooled micro reactor and its application in core monitoring
[Background] The gas-cooled micro reactor is one of advanced reactor types that can be used as movable intelligent micro nuclear power sources. The nuclear detecting has been a main challenge for its deployment due to the compact layout and the harsh service environment inside the core, hence only a small number of ex-core detectors can be deployed for core monitoring. [Purpose] This study aims to explore the design method of the nuclear detecting system for gas-cooled micro reactor and apply it to core monitoring. [Methods] Firstly, a threedimensional integrated reactor model which incorporated the core, ex-core structures, and detectors was built using reactor Monte Carlo code (RMC). By referring to relevant standards, an arrangement method for the nuclear detecting system of micro reactor was developed. Then, design methodologies were proposed for neutron count rate, detector sensitivity, measured neutron component, and detector range. The feasibility of startup without an external 中核集团集中研发项目(气冷微堆型号研发)
- 1 February 2026
- Published by China Science Publishing & Media Ltd. in Nuclear Techniques
Configuration of nuclear detecting system for gas-cooled micro reactor and its application in core monitoring
[Background] The gas-cooled micro reactor is one of advanced reactor types that can be used as movable intelligent micro nuclear power sources. The nuclear detecting has been a main challenge for its deployment due to the compact layout and the harsh service environment inside the core, hence only a small number of ex-core detectors can be deployed for core monitoring. [Purpose] This study aims to explore the design method of the nuclear detecting system for gas-cooled micro reactor and apply it to core monitoring. [Methods] Firstly, a threedimensional integrated reactor model which incorporated the core, ex-core structures, and detectors was built using reactor Monte Carlo code (RMC). By referring to relevant standards, an arrangement method for the nuclear detecting system of micro reactor was developed. Then, design methodologies were proposed for neutron count rate, detector sensitivity, measured neutron component, and detector range. The feasibility of startup without an external 中核集团集中研发项目(气冷微堆型号研发)
- Open Access
- 1 October 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3129 (1) , 012032
A Selection Study on base Material for Gadolinium-Containing Burnable Poisons in a Prismatic High-temperature Gas-cooled Reactor
After the Fukushima nuclear accident, nuclear safety became an important consideration for the development of nuclear energy in various countries. Therefore, more new fourth generation reactors with better inherent safety have been proposed. The prismatic high-temperature gas-cooled-reactor is a new type of reactor that China National Nuclear Corporation is independently developing. Burnable poison is an indispensable part of the core of the reactor, which serves to absorb excess neutrons in the core to balance the reactivity of the core. At present, the existing combustible toxins are either not suitable for high temperatures, structures, or neutron energy spectra, and they cannot be used in new reactors. In order to adapt to the requirements of the new reactor, it is necessary to develop new burnable poisons blocks. To ensure that the burnable poisons can adapt to high-temperature and irradiation environments and possess excellent stability, the selection and design of the base materials are crucial. After determining that Gd should be used as a neutron absorption material, screening work has been carried out for the base materials of the fuel poison core blocks. Through investigation, four types of fuel poison core block systems have been proposed: Gd-Al phase + SiC-based, Gd 2 O 3 + FSZ-based, Gd 2 O 3 + Mg-PSZ-based, and Gd 2 O 3 + Al 2 O 3 -based. By means of the trial production of core block samples, followed by their characterization and testing, the performance of these four base systems has been analyzed. A comprehensive evaluation of the advantages and disadvantages of each system has led to the selection of Gd 2 O 3 +FSZ-based as the base for the gas-cooled micro-reactor fuel poison core blocks.
- 1 October 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3129 (1) , 012032
Open AccessA Selection Study on base Material for Gadolinium-Containing Burnable Poisons in a Prismatic High-temperature Gas-cooled Reactor
After the Fukushima nuclear accident, nuclear safety became an important consideration for the development of nuclear energy in various countries. Therefore, more new fourth generation reactors with better inherent safety have been proposed. The prismatic high-temperature gas-cooled-reactor is a new type of reactor that China National Nuclear Corporation is independently developing. Burnable poison is an indispensable part of the core of the reactor, which serves to absorb excess neutrons in the core to balance the reactivity of the core. At present, the existing combustible toxins are either not suitable for high temperatures, structures, or neutron energy spectra, and they cannot be used in new reactors. In order to adapt to the requirements of the new reactor, it is necessary to develop new burnable poisons blocks. To ensure that the burnable poisons can adapt to high-temperature and irradiation environments and possess excellent stability, the selection and design of the base materials are crucial. After determining that Gd should be used as a neutron absorption material, screening work has been carried out for the base materials of the fuel poison core blocks. Through investigation, four types of fuel poison core block systems have been proposed: Gd-Al phase + SiC-based, Gd 2 O 3 + FSZ-based, Gd 2 O 3 + Mg-PSZ-based, and Gd 2 O 3 + Al 2 O 3 -based. By means of the trial production of core block samples, followed by their characterization and testing, the performance of these four base systems has been analyzed. A comprehensive evaluation of the advantages and disadvantages of each system has led to the selection of Gd 2 O 3 +FSZ-based as the base for the gas-cooled micro-reactor fuel poison core blocks.
- Open Access
The Characterization of Silicone-Tungsten-Based Composites as Flexible Gamma-Ray Shields
Robots are very essential for modern nuclear power plants to monitor equipment conditions and eliminate accidents, allowing one to reduce the radiations on personnel. As a novel robot, a soft robot with the advantages of more degrees of freedom and abilities of continuously bending and twisting has been proposed and developed for applications in nuclear power industry. Considering the radiation and high-temperature environment, the overall performance improvement of the flexible materials used in the soft nuclear robot, such as the tensile property and gamma-ray shielding property, is an important issue, which should be paid attention. Here, a flexible gamma-ray shielding material silicone-W-based composites were initially doped with nano titanium oxide and prepared, with the composition of 20 silicone-(80-x) W-(x) TiO2, where x varied from 0.1 to 2.0 wt.%. Structural investigations on SEM and EDS were performed to confirm the structure of the prepared composites and prove that all the chemicals were included in the compositions. Moreover, the tensile property of the composites at 25, 100, and 150 °C were investigated to study the effect of working temperature on the flexibility of the compositions. The attenuation characteristics including the linear attenuation coefficients and mass attenuation coefficients of the prepared silicone-W or silicone-W-TiO2-based composites with respect to gamma ray were investigated. The stability of the silicone–tungsten-TiO2-based composite at high temperature was studied for the first time. In addition, the influence of nano TiO2 additive on the property’s variation of silicone-W-based composites was initially studied. The comparison of the properties such as the tensile elongation, thermal stability, and gamma-ray shielding of the synthesized silicone-W and silicone-W-TiO2 composites showed that the addition of nano TiO2 powders could be useful to develop novel gamma-ray-shielding materials for radiation protection of soft robots or other applications for which soft gamma-ray-shielding materials are needed.
Open AccessThe Characterization of Silicone-Tungsten-Based Composites as Flexible Gamma-Ray Shields
Robots are very essential for modern nuclear power plants to monitor equipment conditions and eliminate accidents, allowing one to reduce the radiations on personnel. As a novel robot, a soft robot with the advantages of more degrees of freedom and abilities of continuously bending and twisting has been proposed and developed for applications in nuclear power industry. Considering the radiation and high-temperature environment, the overall performance improvement of the flexible materials used in the soft nuclear robot, such as the tensile property and gamma-ray shielding property, is an important issue, which should be paid attention. Here, a flexible gamma-ray shielding material silicone-W-based composites were initially doped with nano titanium oxide and prepared, with the composition of 20 silicone-(80-x) W-(x) TiO2, where x varied from 0.1 to 2.0 wt.%. Structural investigations on SEM and EDS were performed to confirm the structure of the prepared composites and prove that all the chemicals were included in the compositions. Moreover, the tensile property of the composites at 25, 100, and 150 °C were investigated to study the effect of working temperature on the flexibility of the compositions. The attenuation characteristics including the linear attenuation coefficients and mass attenuation coefficients of the prepared silicone-W or silicone-W-TiO2-based composites with respect to gamma ray were investigated. The stability of the silicone–tungsten-TiO2-based composite at high temperature was studied for the first time. In addition, the influence of nano TiO2 additive on the property’s variation of silicone-W-based composites was initially studied. The comparison of the properties such as the tensile elongation, thermal stability, and gamma-ray shielding of the synthesized silicone-W and silicone-W-TiO2 composites showed that the addition of nano TiO2 powders could be useful to develop novel gamma-ray-shielding materials for radiation protection of soft robots or other applications for which soft gamma-ray-shielding materials are needed.