Yijun Yao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yijun Yao has a total of 96 co-authors. Here are the top co-authors by number of shared publications:
- Hailiang Wu
School of Textile Science and Engineering, Xi'an Polytechnic University, Xi'an, 710048, Shaanxi, China; Key Laboratory of Functional Textile Material and Product, Xi'an Polytechnic University, Ministry of Education, Xi'an, 710048, Shaanxi, China
14 shared publications Hailiang Wu
School of Textile Science and Engineering, Xi'an Polytechnic University Xi'an China
9 shared publicationsMiao Wang
School of Textile Science and Engineering, Xi'an Polytechnic University, Xi'an, 710048, Shaanxi, China
9 shared publicationsYanqin Shen
School of Textile Science and Engineering, Xi'an Polytechnic University, Xi'an 710048, Shaanxi, China; Key Laboratory of Functional Textile Material and Product, Xi'an Polytechnic University, Ministry of Education, Xi'an 710048, Shaanxi, China
9 shared publicationsYing Xue
School of Textile Science and Engineering, Xi'an Polytechnic University Xi'an China
8 shared publications- Yanqin Shen
School of Textile Science and Engineering, Xi’an Polytechnic University, China
5 shared publications
Latest Publications
- 18 October 2026
- Published by Wiley in Journal of Applied Polymer Science
Preparation and Repeatable Self‐Healing Performance of Microcapsules With a Dual‐Repair Mechanism
To address the limited repeatability of conventional microcapsule‐based healing systems, repeatedly self‐healing microcapsules (RSMCs) were developed by encapsulating a dual‐component healing agent rich in multiple dynamic bonds. This approach integrated extrinsic with intrinsic self‐healing mechanisms: extrinsic repair was achieved via the thiol‐ene click reaction upon capsule rupture, while intrinsic repair occurred through dynamic bond exchange. RSMCs were incorporated into a structurally similar polythiourethane (PTU) elastomer with intrinsic self‐healing capabilities to fabricate a self‐healing coating (RSMCs/PTU). The structural similarity between the microcapsules and the PTU matrix ensured excellent interfacial compatibility, resulting in an elongation at break and tensile strength of up to 5.03 MPa and 269.44%, respectively. Furthermore, benefiting from its dual‐mode repair mechanism, the coating achieved two‐cycle repair at the same damaged site. The 1st healing process was achieved via UV irradiation at room temperature for 20 min, while the 2nd healing was performed under thermal treatment at 60°C for 10 h. This work offered a new solution to the limitation of repair cycles in microcapsule‐type self‐healing materials, thereby extending the service life of polymer materials.
- 18 October 2026
- Published by Wiley in Journal of Applied Polymer Science
Preparation and Repeatable Self‐Healing Performance of Microcapsules With a Dual‐Repair Mechanism
To address the limited repeatability of conventional microcapsule‐based healing systems, repeatedly self‐healing microcapsules (RSMCs) were developed by encapsulating a dual‐component healing agent rich in multiple dynamic bonds. This approach integrated extrinsic with intrinsic self‐healing mechanisms: extrinsic repair was achieved via the thiol‐ene click reaction upon capsule rupture, while intrinsic repair occurred through dynamic bond exchange. RSMCs were incorporated into a structurally similar polythiourethane (PTU) elastomer with intrinsic self‐healing capabilities to fabricate a self‐healing coating (RSMCs/PTU). The structural similarity between the microcapsules and the PTU matrix ensured excellent interfacial compatibility, resulting in an elongation at break and tensile strength of up to 5.03 MPa and 269.44%, respectively. Furthermore, benefiting from its dual‐mode repair mechanism, the coating achieved two‐cycle repair at the same damaged site. The 1st healing process was achieved via UV irradiation at room temperature for 20 min, while the 2nd healing was performed under thermal treatment at 60°C for 10 h. This work offered a new solution to the limitation of repair cycles in microcapsule‐type self‐healing materials, thereby extending the service life of polymer materials.
MXene/N‐Doped Carbon Nanotube Photothermal Layer‐Vertical Channel Aerogel Solar Steam Generator with Excellent Salt Resistance and High Efficiency Stability
Enhancing photothermal conversion efficiency and modulating sodium ion transport are crucial for constructing high‐performance solar evaporators. Based on the layer‑pillar‑layer structural design, this study prepared a modular photothermal aerogel evaporator (PM/SFA) composed of MXene/TiO 2 /nitrogen‑doped carbon nanotube photothermal film (PVDF/MTNC) and sodium alginate/fiber aerogel (SFA). The top photothermal film forms a three‑dimensional layer‑pillar‑layer heterostructure via in‑situ growth of nitrogen‑doped carbon nanotube micropillars between MXene nanosheets, which widens the interlayer spacing and prolongs the optical path to improve light‑harvesting efficiency. The bottom layer uses sodium alginate as the aerogel matrix, with fiber reinforcement to enhance its mechanical properties, ensuring structural and channel integrity under 90 kPa compressive stress. Vertical microchannels are fabricated via directional freezing to reduce water transport tortuosity, and capillary force enables self‐dilution of brine for efficient salt inhibition and continuous desalination. Under one‐sun irradiation, the evaporator delivers an evaporation rate of 3.42 kg·m −2 ·h −1 and an outdoor freshwater yield of 18.42 kg·m −2 within 8 h, exhibiting outstanding desalination performance. This work provides a novel strategy for developing high‐performance, salt‐resistant MXene‐based solar evaporators through structural innovations of sodium alginate fiber aerogel and layered photothermal materials.
MXene/N‐Doped Carbon Nanotube Photothermal Layer‐Vertical Channel Aerogel Solar Steam Generator with Excellent Salt Resistance and High Efficiency Stability
Enhancing photothermal conversion efficiency and modulating sodium ion transport are crucial for constructing high‐performance solar evaporators. Based on the layer‑pillar‑layer structural design, this study prepared a modular photothermal aerogel evaporator (PM/SFA) composed of MXene/TiO 2 /nitrogen‑doped carbon nanotube photothermal film (PVDF/MTNC) and sodium alginate/fiber aerogel (SFA). The top photothermal film forms a three‑dimensional layer‑pillar‑layer heterostructure via in‑situ growth of nitrogen‑doped carbon nanotube micropillars between MXene nanosheets, which widens the interlayer spacing and prolongs the optical path to improve light‑harvesting efficiency. The bottom layer uses sodium alginate as the aerogel matrix, with fiber reinforcement to enhance its mechanical properties, ensuring structural and channel integrity under 90 kPa compressive stress. Vertical microchannels are fabricated via directional freezing to reduce water transport tortuosity, and capillary force enables self‐dilution of brine for efficient salt inhibition and continuous desalination. Under one‐sun irradiation, the evaporator delivers an evaporation rate of 3.42 kg·m −2 ·h −1 and an outdoor freshwater yield of 18.42 kg·m −2 within 8 h, exhibiting outstanding desalination performance. This work provides a novel strategy for developing high‐performance, salt‐resistant MXene‐based solar evaporators through structural innovations of sodium alginate fiber aerogel and layered photothermal materials.
- 2 April 2026
- Published by Springer Nature in Advanced Fiber Materials
- Vol. 8 (4) , 1492-1508
Interfacial Fusion Engineering Enables Scalable Single-Step Continuous Fabrication of Durable and Highly Sensitive Mechanoluminescent Fiber
- 2 April 2026
- Published by Springer Nature in Advanced Fiber Materials
- Vol. 8 (4) , 1492-1508
Interfacial Fusion Engineering Enables Scalable Single-Step Continuous Fabrication of Durable and Highly Sensitive Mechanoluminescent Fiber
- 30 November 2025
- Published by Elsevier in Carbohydrate Polymers
- Vol. 375, 124773
Phototunable dual-emitting and water-resistant cellulose acetate-based fluorescent materials
- 30 November 2025
- Published by Elsevier in Carbohydrate Polymers
- Vol. 375, 124773
Phototunable dual-emitting and water-resistant cellulose acetate-based fluorescent materials
- 17 June 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 318, 145348
Multifunctional carboxymethyl cellulose-based gel fabric with fluorescent warning for fire rescue
- 17 June 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 318, 145348
Multifunctional carboxymethyl cellulose-based gel fabric with fluorescent warning for fire rescue
- 27 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (23) , 9318-9326
Biomass Based Moisture-Triggered Hybrid Actuator and Electric Generator with Self-Powered Motion Tracking Capability
Constructing moisture-triggered devices with actuation, power generation, and motion tracking capability simultaneously utilizing solution-processable biomass materials is intriguing while remaining a great challenge. Herein, we designed and integrated a device for synchronized actuation and energy output under moisture stimulation, which was constructed with Zn-C electrodes, a biomass film, and a PET film. The biomass membrane with hygroscopicity and ion transport was fabricated using the long-term stable microgel (CKM-GO) composed of cellulose, keratin, and graphene oxide (GO). The integrated device possessed both the fascinating actuation parameters (bending angle of 117°, response time of 3.5 s, curvature of 0.51 cm-1) and energy output (output voltage of 1.2 V and current of 2.2 μA) at 80% RH. Furthermore, the assembled arms grasped-released an object under moisture stimulation, meanwhile the self-powered generated voltage signal tracked the operation process. The device with multiple moisture-responsive functions provides promising platforms for self-powered motion tracking, intelligent robotics, and energy production.
- 27 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (23) , 9318-9326
Biomass Based Moisture-Triggered Hybrid Actuator and Electric Generator with Self-Powered Motion Tracking Capability
Constructing moisture-triggered devices with actuation, power generation, and motion tracking capability simultaneously utilizing solution-processable biomass materials is intriguing while remaining a great challenge. Herein, we designed and integrated a device for synchronized actuation and energy output under moisture stimulation, which was constructed with Zn-C electrodes, a biomass film, and a PET film. The biomass membrane with hygroscopicity and ion transport was fabricated using the long-term stable microgel (CKM-GO) composed of cellulose, keratin, and graphene oxide (GO). The integrated device possessed both the fascinating actuation parameters (bending angle of 117°, response time of 3.5 s, curvature of 0.51 cm-1) and energy output (output voltage of 1.2 V and current of 2.2 μA) at 80% RH. Furthermore, the assembled arms grasped-released an object under moisture stimulation, meanwhile the self-powered generated voltage signal tracked the operation process. The device with multiple moisture-responsive functions provides promising platforms for self-powered motion tracking, intelligent robotics, and energy production.
- 28 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (18) , 8934-8957
Design principles of electroluminescent devices based on different electrodes and recent advances toward their application in textiles
Alternating current electroluminescent (ACEL) devices have become an important direction for the development of visualized smart wearable e-textiles due to their advantages of light weight, flexibility, easy integration, and convenient processing.
- 28 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (18) , 8934-8957
Design principles of electroluminescent devices based on different electrodes and recent advances toward their application in textiles
Alternating current electroluminescent (ACEL) devices have become an important direction for the development of visualized smart wearable e-textiles due to their advantages of light weight, flexibility, easy integration, and convenient processing.
- 11 April 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 310, 142920
Cellulose-keratin polymer based on “thiol-ene” click reaction and ease-to-process performance
- 11 April 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 310, 142920
Cellulose-keratin polymer based on “thiol-ene” click reaction and ease-to-process performance
- 22 February 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 305 (Pt 2) , 141301
Corrigendum to “Preparation of cellulose-based fluorescent aggregations with various morphologies and their microstructure-correlated fluorescence behavior” [Int. J. Biol. Macromol., Volume 290 (2025) 139015]
- 22 February 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 305 (Pt 2) , 141301
Corrigendum to “Preparation of cellulose-based fluorescent aggregations with various morphologies and their microstructure-correlated fluorescence behavior” [Int. J. Biol. Macromol., Volume 290 (2025) 139015]
- 21 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 3 (2) , 346-357
Robust and Long-Lived Photochromic Textiles with Spiropyran Derivatives
- 21 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 3 (2) , 346-357
Robust and Long-Lived Photochromic Textiles with Spiropyran Derivatives