Francisco Sastre
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Francisco Sastre has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Angel Velazquez
Fluid Mechanics and Aerospace Propulsion Department, Universidad Politécnica de Madrid, 28040 Madrid, Spain
11 shared publications - Elena Martin
Instituto de Física e Ciencias Aeroespaciais (IFCAE), Universidade de Vigo, Campus As Lagoas, 32004 Ourense, Spain
9 shared publications - Luis Sanchez de Leon
Department of Fluid Mechanics and Aerospace Propulsion, Universidad Politecnica de Madrid, Plaza del Cardenal Cisneros 3, 28040 Madrid, Spain
5 shared publications A. Velazquez
Univ Politecn Madrid, Fluid Mech & Aerosp Prop Dept, Plaza Cardenal Cisneros 3, Madrid 28040, Spain
3 shared publicationsA. Velázquez
2 shared publications- Alberto Gonzalez-Viana
Fluid Mechanics and Aerospace Propulsion Department, Universidad Politécnica de Madrid, 28040 Madrid, Spain
2 shared publications
Latest Publications
- Open Access
Benchmarking of an Algebraic Tensor-Based HOSVD and a Feed Forward Neural Network for Conceptual Design of Pulse Detonation Engine Nozzles
Conceptual design is a critical phase in the development of propulsion plants. Its aim is to explore multidimensional design spaces to provide guidelines for the detailed design phase. This exploration is necessarily broad in scope and shallow in fidelity. Lately, developments in computing hardware have allowed the use of simplified computational fluid dynamics (CFD) models for conceptual design purposes, thereby increasing significantly the amount of data to be processed and generalised. In this context, the present work benchmarks two specific surrogate-model implementations for the conceptual design of a rocket-type pulse detonation engine: a tensor-based method based on high-order singular value decomposition (HOSVD) and a fully connected feed-forward neural network (NN). Two complementary comparisons were considered: HOSVD versus NN, using the same factorial databases to assess the effect of the surrogate method; and factorial versus low-discrepancy sampling, using the same NN architecture to assess the effect of the database distribution. The benchmark, which involved five input architecture parameters and five output operation parameters, was performed for both the direct analysis problem (outputs obtained from inputs) and the inverse design problem (inputs obtained from outputs). Three different situations were considered in the comparison—dimensionally balanced, overdetermined, and underdetermined—to simulate conditions that typically arise in these design phases. Three databases of different sizes were generated for the comparison. The results provide a case-specific assessment of the performance of the two implementations under the conditions considered and may provide useful guidance on the application of these data-analysis approaches in conceptual design.
Open AccessBenchmarking of an Algebraic Tensor-Based HOSVD and a Feed Forward Neural Network for Conceptual Design of Pulse Detonation Engine Nozzles
Conceptual design is a critical phase in the development of propulsion plants. Its aim is to explore multidimensional design spaces to provide guidelines for the detailed design phase. This exploration is necessarily broad in scope and shallow in fidelity. Lately, developments in computing hardware have allowed the use of simplified computational fluid dynamics (CFD) models for conceptual design purposes, thereby increasing significantly the amount of data to be processed and generalised. In this context, the present work benchmarks two specific surrogate-model implementations for the conceptual design of a rocket-type pulse detonation engine: a tensor-based method based on high-order singular value decomposition (HOSVD) and a fully connected feed-forward neural network (NN). Two complementary comparisons were considered: HOSVD versus NN, using the same factorial databases to assess the effect of the surrogate method; and factorial versus low-discrepancy sampling, using the same NN architecture to assess the effect of the database distribution. The benchmark, which involved five input architecture parameters and five output operation parameters, was performed for both the direct analysis problem (outputs obtained from inputs) and the inverse design problem (inputs obtained from outputs). Three different situations were considered in the comparison—dimensionally balanced, overdetermined, and underdetermined—to simulate conditions that typically arise in these design phases. Three databases of different sizes were generated for the comparison. The results provide a case-specific assessment of the performance of the two implementations under the conditions considered and may provide useful guidance on the application of these data-analysis approaches in conceptual design.
- Open Access
Robust Sensor Selection for Model-Based Aeroengine Diagnosis
The present study addressed the problem of the robust selection of sensors and their actual location on the aeroengine for diagnosis purposes. The objective was to infer the health status of the engine components from the reading of the pressure and temperature sensors. The method was model-based. Its development was illustrated via a direct application to the GE CF6-80 × 101 aeroengine. The novelty of the study lies in its methodological approach, namely, the use of a high-fidelity aeroengine model and a tensor-based algebraic formulation, rather than an AI-based method, for the inverse diagnosis problem. The baseline aeroengine model, formulated via the Proosis software, had nine inputs (eight health parameters plus one control parameter) and eleven outputs (thermodynamic cycle sensors’ readings). The model was used to generate an engine database in tensor form and a surrogate model which was the input for the diagnosis algorithm. The proposed methodology enabled the identification of sensors that are individually critical, as well as sensor subsets within which individual sensors can be removed without compromising the diagnostic accuracy. Another result was that, if the appropriate sensors were selected, the multi-point diagnosis could be used in situations with fewer sensors than health parameters. The global conclusion was that the proposed methodology could be used for generic aeroengines, even if, in the present study, it was illustrated by the application to a particular aeroengine.
Open AccessRobust Sensor Selection for Model-Based Aeroengine Diagnosis
The present study addressed the problem of the robust selection of sensors and their actual location on the aeroengine for diagnosis purposes. The objective was to infer the health status of the engine components from the reading of the pressure and temperature sensors. The method was model-based. Its development was illustrated via a direct application to the GE CF6-80 × 101 aeroengine. The novelty of the study lies in its methodological approach, namely, the use of a high-fidelity aeroengine model and a tensor-based algebraic formulation, rather than an AI-based method, for the inverse diagnosis problem. The baseline aeroengine model, formulated via the Proosis software, had nine inputs (eight health parameters plus one control parameter) and eleven outputs (thermodynamic cycle sensors’ readings). The model was used to generate an engine database in tensor form and a surrogate model which was the input for the diagnosis algorithm. The proposed methodology enabled the identification of sensors that are individually critical, as well as sensor subsets within which individual sensors can be removed without compromising the diagnostic accuracy. Another result was that, if the appropriate sensors were selected, the multi-point diagnosis could be used in situations with fewer sensors than health parameters. The global conclusion was that the proposed methodology could be used for generic aeroengines, even if, in the present study, it was illustrated by the application to a particular aeroengine.
- Open Access
Multi-Objective Optimization of Rocket-Type Pulse Detonation Engine Nozzles
This numerical study addressed the multi-objective optimization of a rocket-type Pulse Detonation Engine nozzle. The Pulse Detonation Engine consisted of a constant length, constant diameter cylindrical section plus a nozzle that could be either convergent, divergent, or convergent–divergent. The space of five design variables contained: equivalence ratio of the H2-Air mixture, convergent contraction ratio, divergent expansion ratio, dimensionless nozzle length, and convergent to divergent length ratio. The unsteady Euler-type numerical solver was quasi-one-dimensional with variable cross-sectional area. Chemistry was simulated by means of a one-step global reaction. The solver was used to generate three coarse five-dimensional data tensors that contained: specific impulse based on fuel, total impulse, and nozzle surface area, for each configuration. The tensors were decomposed using the High Order singular Value Decomposition technique. The eigenvectors of the decompositions were used to generate continuous descriptions of the data tensors. A genetic algorithm plus a Gradient Method optimization algorithm acted on the densified data tensors. Five different objective functions were considered that involved specific impulse based on fuel, total impulse, and nozzle surface area either separately or in doublets/triplets. The results obtained were discussed, both qualitatively and quantitatively, in terms of the different objective functions. Design guidelines were provided that could be of interest in the growing area of Pulse Detonation Engine engineering applications.
Open AccessMulti-Objective Optimization of Rocket-Type Pulse Detonation Engine Nozzles
This numerical study addressed the multi-objective optimization of a rocket-type Pulse Detonation Engine nozzle. The Pulse Detonation Engine consisted of a constant length, constant diameter cylindrical section plus a nozzle that could be either convergent, divergent, or convergent–divergent. The space of five design variables contained: equivalence ratio of the H2-Air mixture, convergent contraction ratio, divergent expansion ratio, dimensionless nozzle length, and convergent to divergent length ratio. The unsteady Euler-type numerical solver was quasi-one-dimensional with variable cross-sectional area. Chemistry was simulated by means of a one-step global reaction. The solver was used to generate three coarse five-dimensional data tensors that contained: specific impulse based on fuel, total impulse, and nozzle surface area, for each configuration. The tensors were decomposed using the High Order singular Value Decomposition technique. The eigenvectors of the decompositions were used to generate continuous descriptions of the data tensors. A genetic algorithm plus a Gradient Method optimization algorithm acted on the densified data tensors. Five different objective functions were considered that involved specific impulse based on fuel, total impulse, and nozzle surface area either separately or in doublets/triplets. The results obtained were discussed, both qualitatively and quantitatively, in terms of the different objective functions. Design guidelines were provided that could be of interest in the growing area of Pulse Detonation Engine engineering applications.
- 20 March 2025
- Published by Emerald Publishing in International Journal of Numerical Methods for Heat & Fluid Flow
- Vol. 35 (10) , 3539-3560
Surrogate data-driven physics-aware model for the conceptual aerodynamic design of rotating detonation engines
Purpose: This work presents a methodology for the conceptual aerodynamic design of rotating detonation engines (RDEs). The purpose of this paper is to assist feasibility studies and to help in the planning of experimental campaigns. Design/methodology/approach: The methodology is based on a surrogate data-driven physics-aware model. Simplified CFD is used to generate a data-tensor-form surrogate model of the RDE. Then, the surrogate model feeds an algorithm that solves the direct problem (prediction) and the inverse problem (multi-parameter design) of the RDE. The direct problem inputs are both operational and geometric RDE parameters. Outputs are performance parameters. The inverse design problem computes operational and geometrical parameters from prescribed performance parameters. Findings: The main practical finding is that the use of surrogate model-based data-driven techniques helps to increase the fidelity level of aerodynamic conceptual design tools for RDE. Originality/value: Traditionally, conceptual design studies of RDE have been carried out using thermodynamic path analysis in different forms. In this work, a methodological step ahead, which incorporates CFD simulations from the onset, is proposed. This was achieved by making use of a surrogate model approach. The main value of the proposed methodology is that it allows for extensive parametric studies with limited computational cost.
- 20 March 2025
- Published by Emerald Publishing in International Journal of Numerical Methods for Heat & Fluid Flow
- Vol. 35 (10) , 3539-3560
Surrogate data-driven physics-aware model for the conceptual aerodynamic design of rotating detonation engines
Purpose: This work presents a methodology for the conceptual aerodynamic design of rotating detonation engines (RDEs). The purpose of this paper is to assist feasibility studies and to help in the planning of experimental campaigns. Design/methodology/approach: The methodology is based on a surrogate data-driven physics-aware model. Simplified CFD is used to generate a data-tensor-form surrogate model of the RDE. Then, the surrogate model feeds an algorithm that solves the direct problem (prediction) and the inverse problem (multi-parameter design) of the RDE. The direct problem inputs are both operational and geometric RDE parameters. Outputs are performance parameters. The inverse design problem computes operational and geometrical parameters from prescribed performance parameters. Findings: The main practical finding is that the use of surrogate model-based data-driven techniques helps to increase the fidelity level of aerodynamic conceptual design tools for RDE. Originality/value: Traditionally, conceptual design studies of RDE have been carried out using thermodynamic path analysis in different forms. In this work, a methodological step ahead, which incorporates CFD simulations from the onset, is proposed. This was achieved by making use of a surrogate model approach. The main value of the proposed methodology is that it allows for extensive parametric studies with limited computational cost.
- Open Access
Reduced-Order Model for Performance Simulation and Conceptual Design of Rocket-Type Pulse Detonation Engines
A model-based method has been developed for the performance simulation and conceptual design of rocket-type pulse detonation engines (PDEs). A reduced-order model (ROM) has been generated based on the high order singular value decomposition of a data tensor obtained from CFD computations. This ROM could be used to solve the direct (performance) and inverse (design) problems in the context of the early phases of pulse detonation engine design. Output performance parameters are predicted from prescribed input operation/geometry parameters in the direct problem, and vice versa in the inverse problem. The focus of this method is industrial application in situations where large parametric searches are to be performed with a reasonable level of fidelity at a low computational cost. It was found that the performance and conceptual design tool thus developed provides results that deviate, on average, by less than 10% from the CFD results. Regarding practical implementation, the method allows for shifting the heavier computational load off-line. In this way, when working on-line, the user can obtain results in less than a second for every single case. The main contribution of this study is showing that a model-based approach that combines CFD and tensor decomposition has the potential to extract a maximum of information from a given computational effort. This characteristic makes the method of interest for early design phases in the aerospace industry.
Open AccessReduced-Order Model for Performance Simulation and Conceptual Design of Rocket-Type Pulse Detonation Engines
A model-based method has been developed for the performance simulation and conceptual design of rocket-type pulse detonation engines (PDEs). A reduced-order model (ROM) has been generated based on the high order singular value decomposition of a data tensor obtained from CFD computations. This ROM could be used to solve the direct (performance) and inverse (design) problems in the context of the early phases of pulse detonation engine design. Output performance parameters are predicted from prescribed input operation/geometry parameters in the direct problem, and vice versa in the inverse problem. The focus of this method is industrial application in situations where large parametric searches are to be performed with a reasonable level of fidelity at a low computational cost. It was found that the performance and conceptual design tool thus developed provides results that deviate, on average, by less than 10% from the CFD results. Regarding practical implementation, the method allows for shifting the heavier computational load off-line. In this way, when working on-line, the user can obtain results in less than a second for every single case. The main contribution of this study is showing that a model-based approach that combines CFD and tensor decomposition has the potential to extract a maximum of information from a given computational effort. This characteristic makes the method of interest for early design phases in the aerospace industry.
- Open Access
Conceptual Study on Car Acceleration Strategies to Minimize Travel Time, Fuel Consumption, and CO2-CO Emissions
A conceptual study was performed on intelligent driving acceleration strategies for vehicles equipped with internal combustion engines. Two archetypal acceleration scenarios of highway driving and urban driving were prescribed. Three trajectories were considered for each scenario. They involved (a) nearly constant acceleration, (b) fast acceleration first and slow acceleration later, and (c) slow acceleration first and fast acceleration later. The selected vehicle was a generic European small–medium passenger car. Engine inlet pressure and ignition time were optimized along each trajectory to minimize fuel consumption, CO, and CO2 emissions, and travel time. The optimization process involved a methodological approach based on the higher-order singular value decomposition of the tensor form of the engine model. The optimized trajectories were analyzed and compared among themselves. Conceptual acceleration design guidelines for intelligent driving were provided that could be of interest when integrating vehicle/engine performance into the surrounding traffic flow.
Open AccessConceptual Study on Car Acceleration Strategies to Minimize Travel Time, Fuel Consumption, and CO2-CO Emissions
A conceptual study was performed on intelligent driving acceleration strategies for vehicles equipped with internal combustion engines. Two archetypal acceleration scenarios of highway driving and urban driving were prescribed. Three trajectories were considered for each scenario. They involved (a) nearly constant acceleration, (b) fast acceleration first and slow acceleration later, and (c) slow acceleration first and fast acceleration later. The selected vehicle was a generic European small–medium passenger car. Engine inlet pressure and ignition time were optimized along each trajectory to minimize fuel consumption, CO, and CO2 emissions, and travel time. The optimization process involved a methodological approach based on the higher-order singular value decomposition of the tensor form of the engine model. The optimized trajectories were analyzed and compared among themselves. Conceptual acceleration design guidelines for intelligent driving were provided that could be of interest when integrating vehicle/engine performance into the surrounding traffic flow.
- Open Access
- 1 August 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (8)
Experimental study on energy harvesting maximization from the flow-induced vibration of a highly confined bluff body
Flow-induced vibrations of rigid prisms supported elastically were studied experimentally in a free-surface water channel with a high blockage (2/5). The study focused on finding the prism cross-sectional shape that maximizes the efficiency of energy harvesting. Seven cross-sectional shapes were tested: square, circular, 45° tilted square, equilateral triangle, isosceles 120° triangle, D-section, and C-section. All other dimensionless parameters of the problem, mass ratio, damping, blockage ratio, reduced velocity range, and the Reynolds (Re) number (characteristic velocity times characteristic length divided by kinematic viscosity) range (400–1070), were kept unchanged. By doing so, the effect of the cross-sectional shape was isolated. D-section proved to be the geometry with the highest values of energy transfer efficiency. A hysteresis loop was present in its oscillatory response (dimensionless oscillation amplitude vs reduced velocity). This loop was characterized by two branches, (+) and (−), meaning a bi-valued amplitude response for each reduced velocity. Regarding temporal patterns of wake topology and body motion, it was found that synchronization occurs in the (+) branch, but not in the (−). Regarding vortex shedding modes, particle image velocimetry was used for identification purposes, and it was found that the 2P mode is the dominant mode in the (+) branch, while the 2S mode pervades the (−). Finally, a new relative reduced velocity definition was introduced, and, when re-plotting the experimental results, it was found that the hysteresis loop disappears, thereby providing a more compact mathematical description of the observed phenomena.
- 1 August 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (8)
Open AccessExperimental study on energy harvesting maximization from the flow-induced vibration of a highly confined bluff body
Flow-induced vibrations of rigid prisms supported elastically were studied experimentally in a free-surface water channel with a high blockage (2/5). The study focused on finding the prism cross-sectional shape that maximizes the efficiency of energy harvesting. Seven cross-sectional shapes were tested: square, circular, 45° tilted square, equilateral triangle, isosceles 120° triangle, D-section, and C-section. All other dimensionless parameters of the problem, mass ratio, damping, blockage ratio, reduced velocity range, and the Reynolds (Re) number (characteristic velocity times characteristic length divided by kinematic viscosity) range (400–1070), were kept unchanged. By doing so, the effect of the cross-sectional shape was isolated. D-section proved to be the geometry with the highest values of energy transfer efficiency. A hysteresis loop was present in its oscillatory response (dimensionless oscillation amplitude vs reduced velocity). This loop was characterized by two branches, (+) and (−), meaning a bi-valued amplitude response for each reduced velocity. Regarding temporal patterns of wake topology and body motion, it was found that synchronization occurs in the (+) branch, but not in the (−). Regarding vortex shedding modes, particle image velocimetry was used for identification purposes, and it was found that the 2P mode is the dominant mode in the (+) branch, while the 2S mode pervades the (−). Finally, a new relative reduced velocity definition was introduced, and, when re-plotting the experimental results, it was found that the hysteresis loop disappears, thereby providing a more compact mathematical description of the observed phenomena.
- 7 November 2022
- Published by Emerald Publishing in International Journal of Numerical Methods for Heat & Fluid Flow
- Vol. 33 (3) , 974-997
3D active mixing of confined power law aqueous polymer solutions: a comparative numerical study
Purpose: This paper aims to study the influence that the second invariant of the rate-of-strain tensor of a power law polymeric fluid (aqueous solution of hydroxyethyl cellulose [HEC]) has on convective mixing performance downstream of a 3D confined oscillating prism. Newtonian and non-Newtonian Reynolds numbers, the mass concentration of HEC and prism oscillation frequency were varied. Design/methodology/approach: A conceptual problem was designed. Its objective was to analyze the convective mixing of two adjacent flow streams when they pass around a moving confined prism. The rectangular prism had a square section, and its sinusoidal motion was prescribed inside a channel with a square section too. OpenFOAM libraries were used to simulate the flow field. Regarding prism motion, the icoDyMFoam solver was used. The problem was analyzed both at the global level (mixing parameter) and local level (detailed flow topology). Findings: For constant Reynolds number, increasing mass concentrations of HEC (in the range from 0.2% to 0.5%) led to better mixing parameters. The improvement was linked to the effect that the second invariant of the rate-of-strain tensor had on flow topology. It was found that mixing is maximum when the prism motion and its wake (the frequency of the first instability) are synchronized. In practical terms, this means that the optimum stirring frequency does not need to be very high; it suffices that it ensures that synchronization occurs. The dominant vorticity shedding pattern found was the so-called 2P mode. However, a significant difference was found when compared to the free-stream situation. While in the former, the two vorticity regions that make up the 2P pair come from the prism, in the present confined case, one came from the prism, and the other came from the wall. Another difference was that in the present case, the 2P pairs were much more elongated than in the free stream case, and this had a significant influence on the stretching and bending of streak lines and, therefore, on mixing. Practical implications: The study that has been presented has a practical industrial implication for the processes industry because it provides guidelines to design active mixers that deal with aqueous power law polymeric solutions. In parallel, it opens up some new research lines in the direction of studying whether the mixing concept might be modified so as to develop a fully passive system that could be far simpler and, possibly, more attractive to industry. Originality/value: The originality and value of the study are associated to the systematic approach that has been followed. It has allowed to establish a clear pattern regarding the active mixing behavior of HEC solutions in confined flows. To the best of authors’ knowledge, this could be the first study of this type in the literature. Also, the study has contributed to understand the vorticity shedding patterns that appear in these types of problems and how they shape wake topology and, consequently, mixing performance. The finding that optimum mixing requires synchronization of stirring motion frequency and wake first natural frequency of instability may help to improve the design and operation of industrial mixers dealing with polymeric aqueous solutions.
- 7 November 2022
- Published by Emerald Publishing in International Journal of Numerical Methods for Heat & Fluid Flow
- Vol. 33 (3) , 974-997
3D active mixing of confined power law aqueous polymer solutions: a comparative numerical study
Purpose: This paper aims to study the influence that the second invariant of the rate-of-strain tensor of a power law polymeric fluid (aqueous solution of hydroxyethyl cellulose [HEC]) has on convective mixing performance downstream of a 3D confined oscillating prism. Newtonian and non-Newtonian Reynolds numbers, the mass concentration of HEC and prism oscillation frequency were varied. Design/methodology/approach: A conceptual problem was designed. Its objective was to analyze the convective mixing of two adjacent flow streams when they pass around a moving confined prism. The rectangular prism had a square section, and its sinusoidal motion was prescribed inside a channel with a square section too. OpenFOAM libraries were used to simulate the flow field. Regarding prism motion, the icoDyMFoam solver was used. The problem was analyzed both at the global level (mixing parameter) and local level (detailed flow topology). Findings: For constant Reynolds number, increasing mass concentrations of HEC (in the range from 0.2% to 0.5%) led to better mixing parameters. The improvement was linked to the effect that the second invariant of the rate-of-strain tensor had on flow topology. It was found that mixing is maximum when the prism motion and its wake (the frequency of the first instability) are synchronized. In practical terms, this means that the optimum stirring frequency does not need to be very high; it suffices that it ensures that synchronization occurs. The dominant vorticity shedding pattern found was the so-called 2P mode. However, a significant difference was found when compared to the free-stream situation. While in the former, the two vorticity regions that make up the 2P pair come from the prism, in the present confined case, one came from the prism, and the other came from the wall. Another difference was that in the present case, the 2P pairs were much more elongated than in the free stream case, and this had a significant influence on the stretching and bending of streak lines and, therefore, on mixing. Practical implications: The study that has been presented has a practical industrial implication for the processes industry because it provides guidelines to design active mixers that deal with aqueous power law polymeric solutions. In parallel, it opens up some new research lines in the direction of studying whether the mixing concept might be modified so as to develop a fully passive system that could be far simpler and, possibly, more attractive to industry. Originality/value: The originality and value of the study are associated to the systematic approach that has been followed. It has allowed to establish a clear pattern regarding the active mixing behavior of HEC solutions in confined flows. To the best of authors’ knowledge, this could be the first study of this type in the literature. Also, the study has contributed to understand the vorticity shedding patterns that appear in these types of problems and how they shape wake topology and, consequently, mixing performance. The finding that optimum mixing requires synchronization of stirring motion frequency and wake first natural frequency of instability may help to improve the design and operation of industrial mixers dealing with polymeric aqueous solutions.
- Open Access
- 12 April 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (4) , 599
Impact of Channels Aspect Ratio on the Heat Transfer in Finned Heat Sinks with Tip Clearance
A 3D numerical study is used to analyze the flow topology and performance, in terms of heat transfer efficiency and required pumping power, of heat sink devices with different channel aspect-ratio in the presence of tip-clearance. Seven different channel aspect ratios , from 0.25 to 1.75, were analyzed. The flow Reynolds numbers , based on the average velocity evaluated in the device channels region, were in the range of 200 to 1000. Two different behaviors of the global Nusselt were obtained depending on the flow Reynolds number: for , the heat transfer increased with the channels aspect ratio, e.g., for , the global Nusselt number increased by 14% for configuration when compared to configuration . For , the maximum Nusselt is obtained for the squared-channel configuration, and, for some configurations, flow destabilization to a unsteady regime appeared. For , Nusselt number reduced when compared with the squared-channel device, 11% and 2% for configurations with and 1.75, respectively. Dimensionless pressure drop decreased with the aspect ratio for all cases. In the context of micro-devices, where the Reynolds number is small, these results indicate that the use of channels with high aspect-ratios is more beneficial, both in terms of thermal and dynamic efficiency.- 12 April 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (4) , 599
Open AccessImpact of Channels Aspect Ratio on the Heat Transfer in Finned Heat Sinks with Tip Clearance
A 3D numerical study is used to analyze the flow topology and performance, in terms of heat transfer efficiency and required pumping power, of heat sink devices with different channel aspect-ratio in the presence of tip-clearance. Seven different channel aspect ratios , from 0.25 to 1.75, were analyzed. The flow Reynolds numbers , based on the average velocity evaluated in the device channels region, were in the range of 200 to 1000. Two different behaviors of the global Nusselt were obtained depending on the flow Reynolds number: for , the heat transfer increased with the channels aspect ratio, e.g., for , the global Nusselt number increased by 14% for configuration when compared to configuration . For , the maximum Nusselt is obtained for the squared-channel configuration, and, for some configurations, flow destabilization to a unsteady regime appeared. For , Nusselt number reduced when compared with the squared-channel device, 11% and 2% for configurations with and 1.75, respectively. Dimensionless pressure drop decreased with the aspect ratio for all cases. In the context of micro-devices, where the Reynolds number is small, these results indicate that the use of channels with high aspect-ratios is more beneficial, both in terms of thermal and dynamic efficiency.